Bonding effectiveness of adhesive luting agents to enamel and dentin

Dental Materials

Volumn 23, Issue 1, 2007, Pages 71-80

  Hikita, K ^a,b   Van Meerbeek, B ^a   De Munck, J ^a   Ikeda, T ^a,c   Van Landuyt, K ^a   Maida, T ^b   Lambrechts, P ^a   Peumans, M ^a  

^a CATHOLIC UNIVERSITY OF LEUVEN   (Belgium)

^b HEALTH SCIENCES UNIVERSITY OF HOKKAIDO   (Japan)

^c Hokkaido University   (Japan)

Author keywords

Adhesion; CAD CAM; Indirect resin composite; Micro tensile bond strength; Resin cement

Indexed keywords

ADHESION; ADHESIVES; BONDING; COMPUTER AIDED DESIGN; COMPUTER AIDED MANUFACTURING; CURING; ENAMELS; FAILURE (MECHANICAL); GELS; STATISTICAL METHODS; TENSILE STRENGTH;

DENTIN; KRUSKAL WALLIS TEST; LUTING AGENTS; MICROTENSILE BOND STRENGTH; RESIN CEMENT; RESIN COMPOSITE;

DENTAL CEMENT;

DENTIN BONDING AGENT; LINKMAX; METHACRYLIC ACID DERIVATIVE; OPTIBOND SOLO PLUS SELF ETCH; OPTIBOND SOLO PLUS SELF-ETCH; PANAVIA FLUORO; PANAVIA-FLUORO; PARADIGM MZ100; PHOSPHONIC ACID DERIVATIVE; PHOSPHORIC ACID; PROMPT L POP; PROMPT L-POP; RELY X UNICEM; RESIN; RESIN CEMENT; SCOTCHBOND ETCHANT; TOOTH CEMENT; VARIOLINK; WATER; ZIRCONIUM;

ARTICLE; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTIN; ENAMEL; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; TEMPERATURE; TENSILE STRENGTH; TIGHT JUNCTION; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; COMPOSITE RESINS; DENTAL BONDING; DENTAL CEMENTS; DENTAL ENAMEL; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; METHACRYLATES; PHOSPHONIC ACIDS; PHOSPHORIC ACIDS; RESIN CEMENTS; STRESS, MECHANICAL; TEMPERATURE; TENSILE STRENGTH; WATER; ZIRCONIUM;

EID: 33845412026     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2005.12.002     Document Type: Article

References (66)

1. Manhart J., Scheibenbogen-Füchsbrunner A., Chen H.Y., and Hickel R. A 2-year clinical study of composite and ceramic inlays. Clin Oral Invest 4 (2000) 192-198
2. Mitchell C.A., Abbariki M., and Orr J.F. The influence of luting cement on the probabilities of survival rate and modes of failure of cast full-coverage crowns. Dent Mater 16 (2000) 198-206
3. Peumans M., Van Meerbeek B., Lambrechts P., and Vanherle G. Porcelain veneers: a review of the literature. J Dent 28 (2000) 163-177
4. Burke F.J., and Watts D.C. Fracture resistance of teeth restored with dentin-bonded crowns. Quintessence Int 25 (1994) 335-340
5. Dietschi D., Maeder M., Meyer J.M., and Holz J. In vitro resistance to fracture of porcelain inlays bonded to tooth. Quintessence Int 21 (1990) 823-831
6. El Zohairy A.A., De Gee A.J., Mohsen M.M., and Feilzer A.J. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 19 (2003) 575-583
7. Ausiello P., Rengo S., Davidson C.L., and Watts D.C. Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: a 3D-FEA study. Dent Mater 20 (2004) 862-872
8. St-Georges A.J., Sturdevant J.R., Swift E.J., and Thompson J.Y. Fracture resistance of prepared teeth restored with bonded inlay restorations. J Prosthet Dent 89 (2003) 551-557
9. Roulet J.F., and Lösche G.M. Tooth-coloured inlays and inserts-long term clinical results. In: Dash W., and Watts D.C. (Eds). Proceedings of conference on: Clinically appropriate alternatives to amalgam: biophysical factors in restorative decision making, Munich, October 30-November 2. Trans Acad Mater (1996) 200-215
10. Ellakwa A.E., Shortall A.C.C., Burke F.J.T., and Marquis P.M. Effects of grit blasting and silanization on bond strengths of a resin luting cement to Belleglass HP indirect composite. Am J Dent 16 (2003) 53-57
11. Van Meerbeek B., De Munck J., Yoshida Y., Inoue S., Vargas M., Vijay P., et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 28 (2003) 215-235
12. Mak Y.F., Lai S.C.N., Cheung G.S.P., Chan A.W.K., Tay F.R., and Pashley D.H. Micro-tensile bond testing of resin cements to dentin and indirect resin composite. Dent Mater 18 (2002) 609-621
13. Carvalho R.M., Pegoraro T.A., Tay F.R., Pegoraro L.F., Silva N.R.F.A., and Pashley D.H. Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent 32 (2004) 55-65
14. Ozturk N., and Ayent F. Dentin bond strengths of two ceramic inlay systems after cementation with three different techniques and one bonding system. J Prosthet Dent 89 (2003) 275-281
15. Mota C.S., Demarco F., Camacho G.B., and Powers F. Tensile bond strength of four resin luting agents bonded to bovine enamel and dentin. J Prosthet Dent 89 (2003) 558-564
16. Nikaido T., Cho E., Nakajima M., Tashiro H., Toba S., Burrow M.F., et al. Tensile bond strengths of resin cements to bovine dentin using resin coating. Am J Dent 16 (2003) 41A-46A
17. Stewart P.G., Jain P., and Hodges J. Shear bond strength of resin cements to both ceramic and dentin. J Prosthet Dent 88 (2002) 277-284
18. Hannig M., Rahlf B., and Schlichting B. Marginal behaviour of "Kulzer" composite inlays under simultaneous mechanical and thermal loading. Dtsch Zahnarztl Z 46 (1991) 618-621
19. Krejci I., Lutz R., and Reiner M. Wear and marginal adaptation of composite resin inlays. J Prosthet Dent 69 (1993) 425-430
20. Mehl A., Godescha P., Kunzelmann K.H., and Hickel R. The margin integrity of composite and ceramic inlays in extensive cavities. Dtsch Zahnarztl Z 51 (1996) 701-705
21. Furukawa K., Inai N., and Tagami J. The effects of luting resin bond to dentin on the strength of dentin supported by indirect resin composite. Dent Mater 18 (2002) 136-142
22. Blackman R., Barghi N., and Duke E. Influence of ceramic thickness on the polymerization of light-cured resin cement. J Prosthet Dent 63 (1990) 295-300
23. Caughman W.F., Chan D.C.N., and Rueggeberg F.A. Curing potential of dual-polymerizable resin cements in simulated clinical situations. J Prosthet Dent 86 (2001) 101-106
24. Braga R.R., Cesar P.F., and Gonzaga C.C. Mechanical properties of resin cements with different activation modes. J Oral Rehabil 29 (2002) 257-262
25. Hofmann N., Papsthart G., Hugo B., and Klaiber B. Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness. J Oral Rehabil 28 (2001) 1022-1028
26. Tanoue N., Koishi Y., Atsuta M., and Matsumura H. Properties of dual-curable luting composites polymerized with single and dual curing modes. J Oral Rehabil 30 (2003) 1015-1021
27. Frankenberger R., Wolfgang O.S., Baresel J., Trapper T., Krämer N., and Petschelt A. Effect of surface treatment on fatigue behaviour between Tetric Ceram inlays and Variolink luting composite. Clin Oral Invest 5 (2001) 260-265
28. Yoshida K., Kamada K., and Atsuta M. Effects of two silane coupling agents, a bonding agent, and thermal cycling on the bond strength of a CAD/CAM composite material cemented with two resin luting agents. J Prosthet Dent 85 (2001) 184-189
29. Peters A.D., and Meiers J.C. Effect of polymerization mode of a dual-cured resin cement on time-dependent shear bond strength to porcelain. Am J Dent 9 (1996) 264-268
30. Rueggeberg F.A., and Caughman W.F. The influence of light exposure on polymerization of dual-cure resin cement. Oper Dent 18 (1993) 48-55
31. Shimura R., Nikaido T., Yamauti M., Ikeda M., and Tagami J. Influence of curing method and storage condition on microhardness of dual-cure resin cements. Dent Mater 24 (2005) 70-75
32. De Munck J., Vargas M., Van Landuyt K., Hikita K., Lambrechts P., and Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 20 (2004) 963-971
33. Ibarra G., Vargas M.A., Armstrong S.R., and Cobb D.S. Microtensile bond strength of self-etching adhesives to ground and unground enamel. J Adhes Dent 4 (2002) 115-124
34. Inoue S., Vargas M.A., Abe Y., Yoshida Y., Lambrechts P., Vanherle G., et al. Microtensile bond strength of eleven contemporary adhesives to enamel. Am J Dent 16 (2003) 329-334
35. Pashley D.H., and Tay F.R. Agressiveness of contemporary self-etching adhesives. Part II: Etching effects on unground enamel. Dent Mater 17 (2001) 430-444
36. Kerby R.E., Knobloch L.A., Clelland N., Lilley H., and Seghi R. Microtensile bond strengths of one-step and self-etching adhesive systems. Oper Dent 30 (2005) 195-200
37. Breschi L., Gobbi P., Falconi M., Mazzotti G., Prati G., and Perdigao J. Ultra-morphology of self-etching adhesives on ground enamel: a high resolution SEM study. Am J Dent 16 (2003) 57A-62A
38. Hannig M., Bock H., and Hoth-Hannig W. Inter-crystallite nanoretention of self-etching adhesives at enamel imaged by transmission electron microscopy. Eur J Oral Sci 110 (2002) 464-470
39. Perdigão J., and Geraldeli S. Bonding characteristics of self-etch adhesives to intact versus prepared enamel. J Esthet Restor Dent 15 (2003) 32-41
40. Shimada Y., Senawongse P., Harnirattisai C., Burrow M.F., Nakaoki Y., and Tagami J. Bond strength of two adhesive systems to primary and permanent enamel. Oper Dent 27 (2002) 403-409
41. De Munck J., Van Meerbeek B., Vargas M., Iracki J., Van Landuyt K., Poitevin A., et al. One day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper Dent 30 (2005) 39-49
42. Hashimoto M., Ohno H., Yoshida E., Hori M., Sano H., Kaga M., et al. Resin-enamel bonds made with self-etching primers on ground enamel. Eur J Oral Sci 111 (2003) 447-453
43. Van Landuyt K., Padmini K., De Munck J., Peumans M., Lambrechts P., and Van Meerbeek B. Bond strength of a mild self-etch adhesive with and without prior acid-etching. J Dent 34 (2006) 77-85
44. Miguez P.A., Castro P.S., Nunes M.F., Walter R., and Pereira P.N. Effect of acid-etching on the enamel bond of two self-etching systems. J Adhes Dent 5 (2003) 107-112
45. Kanemura N., Sano H., and Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent 27 (1999) 523-530
46. Lopes G.C., Marson F.C., Vieira L.C., de Caldeira A.M., and Baratieri L.N. Composite bond strength to enamel with self-etching primers. Oper Dent 29 (2004) 424-429
47. Frankenberger R., and Tay F.R. Self-etch vs etch-and-rinse adhesives: effect of thermo-mechanical fatigue loading on marginal quality of bonded resin composite restorations. Dent Mater 21 (2005) 397-412
48. Tay F.R., King N.M., Suh B.I., and Pashley D.H. Effect of delayed activation of light-cured resin composites on bonding of all-in one adhesives. J Adhes Dent 3 (2001) 207-225
49. Tay R.F., Pashley D.H., Yiu C.K.Y., Sanares A.M.E., and Wei S.H.Y. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part I. Single-step self-etch adhesive. J Adhes Dent 5 (2003) 27-40
50. Frankenberger R., Sindel J., Krämer N., and Petschelt A. Dentin bond strength and marginal adaptation: direct composite resins vs ceramic inlays. Oper Dent 24 (1999) 147-155
51. Behr M., Rosentritt M., Regnet T., Lang R., and Handel G. Marginal adaptation in dentin of a self-adhesive universal resin cement compared with well-tried systems. Dent Mater 20 (2004) 191-197
52. Paul S.J., and Scharer P. The dual bonding technique: a modified method to improve adhesive luting procedures. Int J Periodontics Restor Dent 17 (1997) 536-545
53. Magne P., and Douglas W.H. Porcelain veneers: dentin bonding optimization and biomimetic recovery of the crown. Int J Prosthodont 12 (1999) 111-121
54. Rosentritt M., Behr M., Lang R., and Handel G. Influence of cement type on the marginal adaptation of all-ceramic MOD inlays. Dent Mater 20 (2004) 463-469
55. De Munck J., Van Meerbeek B., Inoue S., Vargas M., Yoshida Y., Armstrong S., et al. Micro-tensile bond strength of one-and two-step self-etch adhesives to bur-cut enamel and dentin. Am J Dent 16 (2003) 414-420
56. Inoue S., Vargas M.A., Abe Y., Yoshida Y., Lambrechts P., Vanherle G., et al. Microtensile bond strength of eleven modern adhesives to dentin. J Adhes Dent 3 (2001) 237-245
57. Brackett W.W., Covey D.A., and St Germain Jr. H.A. One-year clinical performance of a self-etching adhesive in class V resin composites cured by two methods. Oper Dent 27 (2002) 218-222
58. Van Dijken J.W.V. Durability of three simplified adhesive systems in Class V non-carious cervical dentin lesions. Am J Dent 17 (2004) 27-32
59. Peumans M., Kanumilli P., De Munck J., Van Landuyt K., Lambrechts P., and Van Meerbeek B. Clinical effectiveness of contemporary adhesives: a review of current clinical trials. Dent Mater 21 (2005) 864-881
60. El Zohairy A.A., De Gee A.J., Mohsen M.M., and Feilzer A.J. Effect of conditioning time of self-etching primers on dentin bond strength of three adhesive resin cements. Dent Mater 21 (2005) 83-93
61. Tay F.R., Pashley D.H., Suh B.I., Carvalho R.M., and Itthagarun A. Single-step adhesives are permeable membranes. J Dent 30 (2002) 371-382
62. Takahashi A., Sato Y., Uno S., Pereira P.N., and Sano H. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater 18 (2002) 263-268
63. Jayasooriya P.R., Pereira P.N.R., Nikaido T., Burrow M.F., and Tagami J. The effect of "resin coating" on the interfacial adaptation of composite inlays. Oper Dent 28 (2003) 28-35
64. Jayasooriya P.R., Pereira P.N.R., Nikaido T., and Tagami J. Efficacy of a resin coating on bond strengths of resin cement to dentin. J Esthet Restor Dent 15 (2003) 105-113
65. Van Landuyt K, Peumans M, De Munck J, Lambrechts P, Van Meerbeek B. Extension of a one-step self-etch adhesive into a multi-step adhesive. Dent Mater, in press.
66. Shirai K., De Munck J., Yoshida Y., Inoue S., Lambrechts P., Shintani H., et al. Effect of cavity configuration and aging on the bonding effectiveness of six adhesives to dentin. Dent Mater 21 (2005) 110-124