Toward low-cost, high-efficiency, and scalable organic solar cells with transparent metal electrode and improved domain morphology

IEEE Journal on Selected Topics in Quantum Electronics

Volumn 16, Issue 6, 2010, Pages 1807-1820

  Kang, Myung Gyu ^a   Park, Hui Joon ^b   Ahn, Se Hyun ^b   Xu, Ting ^b   Guo, L Jay ^b  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Bulk heterojunction (BHJ); nanoimprint lithography (NIL); organic solar cell (OSC); roll to roll (R2R); surface plasmons (SPs); transparent and conductive electrode (TCE)

Indexed keywords

BULK HETEROJUNCTION; CONDUCTIVE ELECTRODES; NANOIMPRINT LITHOGRAPHY (NIL); ORGANIC SOLAR CELL; ROLL TO ROLL; SURFACE PLASMONS (SPS);

CONDUCTIVE FILMS; CONVERSION EFFICIENCY; ELECTRIC CONDUCTIVITY; FLIGHT DYNAMICS; HETEROJUNCTIONS; INDIUM COMPOUNDS; MECHANICAL PROPERTIES; MORPHOLOGY; NANOIMPRINT LITHOGRAPHY; OPTICAL DATA STORAGE; OPTICAL PROPERTIES; PLASMONS; SURFACE PLASMON RESONANCE; TIN; TIN OXIDES;

SOLAR CELLS;

EID: 78650060961     PISSN: 1077260X     EISSN: None     Source Type: Journal    
DOI: 10.1109/JSTQE.2010.2044634     Document Type: Article

References (91)

1. P. Peumans, A. Yakimov, and S. R. Forrest, "Small molecular weight organic thin-film photodetectors and solar cells, " J. Appl. Phys., vol. 93, pp. 3693-3723, 2003.
2. H. Hoppe and N. S. Sariciftci, "Organic solar cells: An overview, " J. Mater. Res., vol. 19, pp. 1924-1945, 2004.
3. K. M. Coakley and M. D. McGehee, "Conjugated polymer photovoltaic cells, " Chem. Mater., vol. 16, pp. 4533-4542, 2004.
4. C. W. Tang, "Two-layer organic photovoltaic cell, " Appl. Phys. Lett., vol. 48, pp. 183-185, 1986.
5. G. Li, V. Shrotriya, J. Huang, Y. Yao, T. Moriarty, K. Emery, and Y. Yang, "High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends, " Nature Mater., vol. 4, pp. 864-868, 2005.
6. W. Ma, C. Yang, X. Gong, K. Lee, and A. J. Heeger, "Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology, " Adv. Funct. Mater., vol. 15, pp. 1617-1622, 2005.
7. J. Y. Kim, K. Lee, N. E. Coates, D. Moses, T.-Q. Nguyen, M. Dante, and A. J. Heeger, "Efficient tandem polymer solar cells fabricated by all-solution processing, " Science, vol. 317, pp. 222-225, 2007.
8. S. H. Park, A. Roy, S. Beaupre, S. Cho, N. Coates, J. S. Moon, D. Moses, M. Leclerc, K. Lee, and A. J. Heeger, "Bulk heterojunction solar cells with internal quantum efficiency approaching 100%, " Nature Photon., vol. 3, pp. 297-302, 2009.
9. W.-Y. Wong, X.-Z. Wang, Z. He, A. B. Djurisic, C.-T. Yip, K.-Y. Cheung, H. Wang, C. S. K. Mak, and W.-K. Chan, "Metallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells, " Nature Mater., vol. 6, pp. 521-527, 2007.
10. W.-Y. Wong, "Metallopolyyne polymers as new functional materials for photovoltaic and solar cell applications, " Macromol. Chem. Phys., vol. 209, pp. 14-24, 2008.
11. D. Gilles, C. S. Markus, and J. B. Christoph, "Polymer-fullerene bulk-heterojunction solar cells, " Adv. Mater., vol. 21, pp. 1323-1338, 2009.
12. A. Andersson, N. Johansson, P. Bröms, N. Yu, D. Lupo, and W. R. Salaneck, "Fluorine tin oxide as an alternative to indium tin oxide in polymer LEDs, " Adv. Mater., vol. 10, pp. 859-863, 1998.
13. V. Adamovich, A. Shoustikov, and M. E. Thompson, "TiN as an anode material for organic light-emitting diodes, " Adv. Mater., vol. 11, pp. 727-730, 1999.
14. H. Kim, C. M. Gilmore, J. S. Horwitz, A. Pique, H. Murata, G. P. Kushto, R. Schlaf, Z. H. Kafafi, and D. B. Chrisey, "Transparent conducting aluminum-doped zinc oxide thin films for organic light-emitting devices, " Appl. Phys. Lett., vol. 76, pp. 259-261, 2000.
15. J. Cui, A. Wang, N. L. Edleman, J. Ni, P. Lee, N. R. Armstrong, and T. J. Marks, "Indium tin oxide alternatives-high work function transparent conducting oxides as anodes for organic light-emitting diodes, " Adv. Mater., vol. 13, pp. 1476-1480, 2001.
16. F. Zhang, M. Johansson, M. R. Andersson, J. C. Hummelen, and O. Inganäs, "Polymer photovoltaic cells with conducting polymer anodes, " Adv. Mater., vol. 14, pp. 662-665, 2002.
17. Z. Wu, Z. Chen, X. Du, J. M. Logan, J. Sippel, M. Nikolou, K. Kamaras, J. R. Reynolds, D. B. Tanner, A. F. Hebard, and A. G. Rinzler, "Transparent, conductive carbon nanotube films, " Science, vol. 305, pp. 1273-1276, 2004.
18. A. J. Miller, R. A. Hatton, and S. R. P. Silva, "Interpenetrating multiwall carbon nanotube electrodes for organic solar cells, " Appl. Phys. Lett., vol. 89, pp. 133117-1-133117-3, 2006.
19. J. van de Lagemaat, T. M. Barnes, G. Rumbles, S. E. Shaheen, T. J. Coutts, C. Weeks, I. Levitsky, J. Peltola, and P. Glatkowski, "Organic solar cells with carbon nanotubes replacing In2 O3:Sn as the transparent electrode, " Appl. Phys. Lett., vol. 88, pp. 233503-1-233503-3, 2006.
20. M. W. Rowell, M. A. Topinka, M. D. McGehee, H.-J. Prall, G. Dennler, N. S. Sariciftci, L. Hu, and G. Gruner, "Organic solar cells with carbon nanotube network electrodes, " Appl. Phys. Lett., vol. 88, pp. 233506-1-233506-3, 2006.
21. 2-F anodes, " Adv. Mater., vol. 18, pp. 2018-2022, 2006.
22. A. J. Anthony, R. A. Hatton, G. Y. Chen, and S. R. P. Silva, "Carbon nanotubes grown on In2 O3:Sn glass as large area electrodes for organic photovoltaics, " Appl. Phys. Lett., vol. 90, pp. 023105-1-023105-3, 2007.
23. K. Tvingstedt and O. Inganäs, "Electrode grids for ITO free organic photovoltaic devices, " Adv. Mater., vol. 19, pp. 2893-2897, 2007.
24. J.-Y. Lee, S. T. Connor, Y. Cui, and P. Peumans, "Solution-processed metal nanowire mesh transparent electrodes, " Nano Lett., vol. 8, pp. 689-692, 2008.
25. M.-G. Kang, M.-S. Kim, J. Kim, and L. J. Guo, "Organic solar cells using nanoimprinted transparent metal electrodes, " Adv. Mater., vol. 20, pp. 4408-4413, 2008.
26. S. K. Park, J. I. Han, W. K. Kim, and M. G. Kwak, "Deposition of indium-tin-oxide films on polymer substrates for application in plastic-based flat panel displays, " Thin Solid Films, vol. 397, pp. 49-55, 2001.
27. F. L. Wong, M. K. Fung, S. W. Tong, C. S. Lee, and S. T. Lee, "Flexible organic light-emitting device based on magnetron sputtered indium-tin-oxide on plastic substrate, " Thin Solid Films, vol. 466, pp. 225-230, 2004.
28. J. Szczyrbowski, A. Dietrich, and H. Hoffmann, "Optical and electrical properties of RF-sputtered indium-tin oxide films, " Phys. Stat. Sol. A, vol. 78, pp. 243-252, 1983.
29. K. Sreenivas, T. S. Rao, A. Mansingh, and S. Chandra, "Preparation and characterization of rf sputtered indium tin oxide films, " J. Appl. Phys., vol. 57, pp. 384-392, 1985.
30. M. Higuchi, S. Uekusa, R. Nakano, and K. Yokogawa, "Postdeposition annealing influence on sputtered indium tin oxide film characteristics, " Jpn. J. Appl. Phys., vol. 1, pp. 302-306, 1994.
31. S. Yamamoto, T. Yamanaka, and Z. Ueda, "Properties of Sn-doped In2 O3 by reactive magnetron sputtering and subsequent annealing, " J. Vac. Sci. Technol. A, vol. 5, pp. 1952-1955, 1987.
32. T. Minami, H. Sonohara, T. Kakumu, and S. Takata, "Physics of very thin ITO conducting films with high transparency prepared by DC magnetron sputtering, " Thin Solid Films, vol. 270, pp. 37-42, 1995.
33. F. Niino, H. Hirasawa, and K.-I. Kondo, "Deposition of low-resistivity ITO on plastic substrates by DC arc-discharge ion plating, " Thin Solid Films, vol. 411, pp. 28-31, 2002.
34. J. R. Sheats and D. B. Roitman, "Failure modes in polymer-based light-emitting diodes, " Synth. Met., vol. 95, pp. 79-85, 1998.
35. Z. Chen, B. Cotterell, W. Wang, E. Guenther, and S.-J. Chua, "A mechanical assessment of flexible optoelectronic devices, " Thin Solid Films, vol. 394, pp. 202-206, 2001.
36. W. S. Jahng, A. H. Francis, H. Moon, J. I. Nanos, and M. D. Curtis, "Is indium tin oxide a suitable electrode in organic solar cells? Photovoltaic properties of interfaces in organic p/n junction photodiodes, " Appl. Phys. Lett., vol. 88, pp. 093504-1-093504-3, 2006.
37. B. Maennig, J. Drechsel, D. Gebeyehu, P. Simon, F. Kozlowski, A. Werner, F. Li, S. Grundmann, S. Sonntag, M. Koch, K. Leo, M. Pfeiffer, H. Hoppe, D. Meissner, N. S. Sariciftci, I. Riedel, V. Dyakonov, and J. Parisi, "Organic p-i-n solar cells, " Appl. Phys. A, vol. 79, pp. 1-14, 2004.
38. Y.-H. Kim, S.-H. Lee, J. Noh, and S.-H. Han, "Performance and stability of electroluminescent device with self-assembled layers of poly (3, 4-ethylenedioxythiophene)-poly (styrenesulfonate) and polyelectrolytes, " Thin Solid Films, vol. 510, pp. 305-310, 2006.
39. M. P. De Jong, D. P. L. Simons, M. A. Reijme, L. J. van Ijzendoorn, A. W. Denier Van DerGon, M. J. A. de Voigt, H. H. Brongersma, and R. W. Gymer, "Indium diffusion in model polymer light-emitting diodes, " Synth. Met., vol. 110, pp. 1-6, 2000.
40. G. Yu, J. Gao, J. C. Hummelen, F. Wudl, and A. J. Heeger, "Polymer photovoltaic cells: Enhanced efficiencies via a network of internal donor-acceptor heterojunctions, " Science, vol. 270, pp. 1789-1791, 1995.
41. J. J. M. Halls, C. A. Walsh, N. C. Greenham, E. A. Marseglia, R. H. Friend, S. C. Moratti, and A. B. Holmes, "Efficient photodiodes from interpenetrating polymer networks, " Nature, vol. 376, pp. 498-500, 1995.
42. S. S. V. Bavel, E. Sourty, G. D. With, and J. Loos, "Three- dimensional nanoscale organization of bulk heterojunction polymer solar cells, " Nano Lett., vol. 9, pp. 507-513, 2009.
43. J. M. Halls, K. Pichler, R. H. Friend, S. C. Moratti, and A. B. Holmes, "Exciton diffusion and dissociation in a poly (p-phenylenevinylene)/C60 heterojunction photovoltaic cell, " Appl. Phys. Lett., vol. 68, pp. 3120-3122, 1996.
44. L. A. A. Pettersson, L. S. Roman, and O. Inganäs, "Modeling photocurrent action spectra of photovoltaic devices based on organic thin films, " J. Appl. Phys., vol. 86, pp. 487-496, 1999.
45. M. Theander, A. Yartsev, D. Zigmantas, V. Sundström, W. Mammo, M. R. Anderson, and O. Inganäs, "Photoluminescence quenching at a polythiophene/C60 heterojunction, " Phys. Rev. B, vol. 61, pp. 12957-12963, 2000.
46. T. J. Savenije, J. M. Warman, and A. Goossens, "Visible light sensitisation of titanium dioxide using a phenylene vinylene polymer, " Chem. Phys. Lett., vol. 287, pp. 148-153, 1998.
47. A. Haugeneder, M. Neges, C. Kallinger, W. Spirkl, U. Lemmer, J. Feldman, U. Scherf, E. Harth, A. Gugel, and K. Mullen, "Exciton diffusion and dissociation in conjugated polymer/fullerene blends and heterostructures, " Phys. Rev. B, vol. 59, pp. 15346-15351, 1999.
48. M.-G. Kang and L. J. Guo, "Nanoimprinted semitransparent metal electrodes and their application in organic light emitting diodes, " Adv. Mater., vol. 19, pp. 1391-1396, 2007.
49. L. J. Guo, "Nanoimprint lithography: Methods and material requirements, " Adv. Mater., vol. 19, pp. 495-513, 2007.
50. H. J. Park, M.-G. Kang, S. H. Ahn, and L. J. Guo, "Facile route to polymer solar cells with optimum morphology readily applicable to roll-to-roll process without sacrificing high device performances, " Adv. Mater., tobe published. DOI: 10.1002/adma.201000250
51. L. S. Roman, O. Inganäs, T. Granlund, T. Nyberg, M. Svensson, M. R. Andersson, and J. C. Hummelen, "Trapping light in polymer photodiodes with soft embossed gratings, " Adv. Mater., vol. 12, pp. 189-195, 2000.
52. S.-S. Kim, S.-I. Na, J. Jo, and D.-Y. Kim, "Efficient polymer solar cells fabricated by simple brush painting, " Adv. Mater., vol. 19, pp. 4410-4415, 2007.
53. C. Cocoyer, L. Rocha, L. Sicot, B. Geffroy, R. D. Bettignies, C. Sentein, C. Fiorini-Debuisschert, and P. Raimond, "Implementation of submicrometric periodic surface structures toward improvement of organic-solar-cell performances, " Appl. Phys. Lett., vol. 88, pp. 133108-1-133108-3, 2006.
54. M.-S. Kim, J.-S. Kim, J. C. Cho, M. Shtein, L. J. Guo, and J. Kim, "Flexible conjugated polymer photovoltaic cells with controlled heterojunctions fabricated using nanoimprint lithography, " Appl. Phys. Lett., vol. 90, pp. 123113-1-123113-3, 2007.
55. S. H. Ahn and L. J. Guo, "High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates, " Adv. Mater., vol. 20, pp. 2044-2049, 2008.
56. S. Y. Chou, P. R. Krauss, and P. J. Renstrom, "Imprint lithography with 25-nanometer resolution, " Science, vol. 272, pp. 85-87, 1996.
57. M.-G. Kang and L. J. Guo, "Semitransparent Cu electrode on a flexible substrate and its application in organic light emitting diodes, " J. Vac. Sci. Technol. B, vol. 25, pp. 2637-2641, 2007.
58. M.-G. Kang, H. J. Park, S. H. Ahn, and L. J. Guo, "Transparent Cu nanowire mesh electrode on flexible substrates fabricated by transfer printing and its application in organic solar cells, " Sol. Energy Mater. Sol. Cells, vol. 94, pp. 1179-1184, 2010.
59. S. H. Ahn and L. J. Guo, "Large-area roll-to-roll and roll-to-plate nanoimprint lithography and analytical models for predicting residual layer thickness, " ACS Nano, vol. 3, pp. 2304-2310, 2009.
60. A. Cravino, P. Schilinsky, and C. J. Brabec, "Characterization of organic solar cells: The importance of device layout, " Adv. Funct. Mater., vol. 17, pp. 3906-3910, 2007.
61. G. Li, V. Shrotriya, Y. Yao, J. Huang, and Y. Yang, "Manipulating regioregular poly (3-hexylthiophene): [6, 6]-phenyl-C61-butyric acid methyl ester blends-Route towards high efficiency polymer solar cells, " J. Mater. Chem., vol. 17, pp. 3126-3140, 2007.
62. P. W. M. Blom, V. D. Mihailetchi, L. J. A. Koster, and D. E. Markov, "Device physics of polymer:fullerene bulk heterojunction solar cells, " Adv. Mater., vol. 19, pp. 1551-1566, 2007.
63. S.-B. Rim, S. Zhao, S. R. Scully, M. D. McGehee, and P. Peumans, "An effective light trapping configuration for thin-film solar cells, " Appl. Phys. Lett., vol. 91, pp. 243501-1-243501-3, 2007.
64. S.-I. Na, S.-S. Kim, S.-S. Kwon, J. Jo, J. Kim, T. Lee, and D.-Y. Kim, "Surface relief gratings on poly (3-hexylthiophene) and fullerene blends for efficient organic solar cells, " Appl. Phys. Lett., vol. 91, pp. 173509-1-173509-3, 2007.
65. D.-H. Ko, J. R. Tumbleston, L. Zhang, S. Williams, J. M. DeSimone, R. Lopez, and E. T. Samulski, "Photonic crystal geometry for organic solar cells, " Nano Lett., vol. 9, pp. 2742-2746, 2009.
66. C. Stephane, P. Fabrice, T. Roland, and P. Jean-Luc, "Efficient light absorption in metal-semiconductor-metal nanostructures, " Appl. Phys. Lett., vol. 85, pp. 194-196, 2004.
67. P. R. Barry, P. Peter, and R. F. Stephen, "Long-range absorption enhancement in organic tandem thin-film solar cells containing silver nanoclusters, " J. Appl. Phys., vol. 96, pp. 7519-7526, 2004.
68. T. D. Heidel, J. K. Mapel, M. Singh, K. Celebi, and M. A. Baldo, "Surface plasmon polariton mediated energy transfer in organic photovoltaic devices, " Appl. Phys. Lett., vol. 91, pp. 093506-1-093506-3, 2007.
69. J. K. Mapel, M. Singh, M. A. Baldo, and K. Celebi, "Plasmonic excitation of organic double heterostructure solar cells, " Appl. Phys. Lett., vol. 90, pp. 121102-1-121101-3, 2007.
70. A. J. Morfa, K. L. Rowlen, T. H. R. Reilly III, M. J. Romero, and J. V. D. Lagemaat, "Plasmon-enhanced solar energy conversion in organic bulk heterojunction photovoltaics, " Appl. Phys. Lett., vol. 92, pp. 013504-1-013504-3, 2008.
71. S.-S. Kim, S.-I. Na, J. Jo, D.-Y. Kim, and Y.-C. Nah, "Plasmon enhanced performance of organic solar cells using electrodeposited Ag nanoparticles, " Appl. Phys. Lett., vol. 93, pp. 073307-1-073307-3, 2008.
72. T. H. Reilly, III, J. van de Lagemaat, R. C. Tenent, A. J. Morfa, and K. L. Rowlen, "Surface-plasmon enhanced transparent electrodes in organic photovoltaics, " Appl. Phys. Lett., vol. 92, pp. 243304-1-243304-3, 2008.
73. N. C. Lindquist, W. A. Luhman, S.-H. Oh, and R. J. Homes, "Plasmonic nanocavity arrays for enhanced efficiency in organic photovoltaic cells, " Appl. Phys. Lett., vol. 93, pp. 123308-1-123308-3, 2008.
74. M. G. Kang, T. Xu, H. J. Park, X. G. Luo, and L. J. Guo, "Efficiency enhancement of organic solar cells using transparent plasmonic Ag nanowire electrodes, " Adv. Mater., vol. 22, no. 39, pp. 4378-4383, Oct. 2010.
75. M. D. Malinsky, K. L. Kelly, G. C. Schatz, and R. P. Van Duyne, "Nanosphere Lithography: Effect of substrate on the localized surface plasmon resonance spectrum of silver nanoparticles, " J. Phys. Chem. B, vol. 105, pp. 2343-2350, 2001.
76. M. Campoy-Quiles, T. Ferenczi, T. Agostinelli, P. G. Etchegoin, Y. Kim, T. D. Anthopoulos, P. N. Stavrinou, D. D. C. Bradley, and J. Nelson, "Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends, " Nature Mater., vol. 7, pp. 158-164, 2008.
77. Y. Yao, J. Hou, Z. Xu, G. Li, and Y. Yang, "Effects of solvent mixtures on the nanoscale phase separation in polymer solar cells, " Adv. Funct. Mater., vol. 18, pp. 1783-1789, 2008.
78. Z. Xu, L.-M. Chen, G. Yang, C.-H. Huang, J. Hou, Y. Wu, G. Li, C.-S. Hsu, and Y. Yang, "Vertical phase separation in poly (3- hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells, " Adv. Funct. Mater., vol. 19, pp. 1227-1234, 2009.
79. D. S. Germack, C. K. Chan, B. H. Hamadani, L. J. Richter, D. A. Fischer, D. J. Gundlach, and D. M. DeLongchamp, "Substrate-dependent interface composition and charge transport in films for organic photovoltaics, " Appl. Phys. Lett., vol. 94, pp. 233303-1-233303-3, 2009.
80. F. C. Krebs, S. A. Gevorgyan, and J. Alstrup, "A roll-to-roll process to flexible polymer solar cells: Model studies, manufacture and operational stability studies, " J. Mater. Chem., vol. 19, pp. 5442-5451, 2009.
81. F. C. Krebs, "All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps, " Org. Electron., vol. 10, pp. 761-768, 2009.
82. L. Blankenburg, K. Schultheis, H. Schache, S. Sensfuss, and M. Schrödner, "Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells, " Sol. Energy Mater. Sol. Cells, vol. 93, pp. 476-483, 2009.
83. M. Sunderberg, O. Inganas, S. Stafstrom, G. Gustafsson, and B. Sjogren, "Optical absorption of poly (3-alkylthiophenes) at low temperatures, " Solid State Commun., vol. 71, pp. 435-439, 1989.
84. V. D. Mihailetchi, L. J. A. Koster, P. W. M. Blom, C. Melzer, B. D. Boer, J. K. J. Duren, and R. A. J. Janssen, "Compositional dependence of the performance of poly (p-phenylene vinylene):methanofullerene bulkheterojunction solar cells, " Adv. Funct. Mater., vol. 15, pp. 795-801, 2005.
85. V. Shrotriya, Y. Yao, G. Li, and Y. Yang, "Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance, " Appl. Phys. Lett., vol. 89, pp. 063505-1-063505-3, 2006.
86. M. A. Lampert and P. Mark, Current Injection in Solids. New York: Academic, 1970.
87. Y. Kim, S. Cook, S. M. Tuladhar, S. A. Choulis, J. Nelson, J. R. Durrant, D. D. C. Bradley, M. Giles, I. McCulloch, C.-S. Ha, and M. Ree, "A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells, " Nature Mater., vol. 5, pp. 197-203, 2006.
88. N. Koch, A. Elschner, and R. L. Johnson, "Green polyfluorene- conducting polymer interfaces: Energy level alignment and device performance, " J. Appl. Phys., vol. 100, pp. 024512-1-024512-5, 2006.
89. M. D. Irwin, D. B. Buchholz, A. W. Hains, R. P. H. Chang, and T. J. Marks, "p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells, " Proc. Natl. Acad. Sci. USA, vol. 105, pp. 2783-2787, 2008.
90. M.-S. Kim, M.-G. Kang, L. J. Guo, and J. Kim, "Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance, " Appl. Phys. Lett., vol. 92, pp. 133301-1-133301-3, 2008.
91. H.-Y. Chen, J. Hou, S. Zhang, Y. Liang, G. Yang, Y. Yang, L. Yu, Y. Wu, and G. Li, "Polymer solar cells with enhanced open-circuit voltage and efficiency, " Nature Photon., vol. 3, pp. 649-653, 2009.