Effect of processing parameters, antistiction coatings, and polymer type when injection molding microfeatures

Polymer Engineering and Science

Volumn 50, Issue 2, 2010, Pages 411-419

  Yoon, Sung Hwan ^a   Cha, Nam Goo ^b   Lee, Jun S ^a   Park, Jin Goo ^c   Carter, David J ^d   Mead, Joey L ^a   Barry, Carol M F ^a  

^a University of Massachusetts   (United States)

^b NORTHEASTERN UNIVERSITY   (United States)

^c Hanyang University   (South Korea)

^d CHARLES STARK DRAPER LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; PLASTIC COATINGS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY;

ANTI-STICTION COATING; INJECTION MOULDED; MICRO-FEATURE; MICROSCALE FEATURES; OPTIMIZED PROCESS; POLYMER TYPES; PROCESS PARAMETERS; PROCESSING PARAMETERS; THERMOPLASTIC MATERIALS; THERMOPLASTIC POLYURETHANES;

INJECTION MOLDING;

EID: 77249135098     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.21541     Document Type: Article

References (38)

1. H. Pranov, H.K. Rasmussen, N.B. Larsen, and N. Gadegaard, Polym. Eng. Sci., 46, 160 (2006).
2. A.E. Guber, M. Heckele, D. Herrmann, A. Muslija, V. Saile, L. Eichhorn, T. Gietzelt, W. Hoffmann, P.C. Hauser, and J. Tanyanyiwa, Chem. Eng. J., 101, 447 (2004).
3. L. Weber and W. Ehrfeld, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 56, 930 (1998).
4. K. Liszewski, Genet. Eng. Biotechnol. News., 29, 44 (2009).
5. G.M. Whitesides, Nature, 442, 368 (2006).
6. S.-H. Yoon, C. Srirojpinyo, J. Lee, C. Sung, J.L. Mead, and C.M.F. Barry, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 62, 738 (2004).
7. S.-H. Yoon, C. Srirojpinyo, J.S. Lee, J.L. Mead, S. Matsui, and C.M.F. Barry, Proc. SPIE, 5763, 107 (2005).
8. I. Dris, W. Bushko, and A. Avagliano, Proc. SPIE, 4342, 45 (2002).
9. S.-H. Yoon, J. Lee, K. Park, J.L. Mead, S. Matsui, and C.M.F. Barry, Proc. SPIE, 6380, 63800K (2006).
10. C. Srirojpinyo, S.-H. Yoon, J. Lee, C. Sung, J.L. Mead, and C.M.F. Barry, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 62, 743 (2004).
11. A. D'Amore, M. Gabriel, W. Haese, H. Schift, and W. Kaiser, Kunststoffe Plast. Europe, 94, 54 (2004).
12. H. Schift, C. David, M. Gabriel, J. Gobrecht, L.J. Heyderman, W. Kaiser, S. Koppel, and L. Scandella, Microelectr. Eng., 53, 171 (2000).
13. S.-H. Yoon, J.S. Lee, J.L. Mead, D. Carter, N.-G. Cha, J.-G. Park, and C.M.F. Barry, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 65, 1983 (2007).
14. R.S. Kane, S. Takayama, E. Ostuni, D.E. Ingber, and G.M. Whitesides, Biomaterials, 20, 2363 (1999).
15. G.M. Whitesides, E. Ostuni, S. Takayama, X. Jiang, and D.E. Ingber, Ann. Rev. Biomed. Eng., 3, 335 (2001).
16. T.W. Odom, J.C. Love, D.B. Wolfe, K.E. Paul, and G.M. Whitesides, Langmuir, 18, 5314 (2002).
17. L. Frisch, Rubber World, 229, 32 (2003).
18. M. Beck, M. Graczyk, I. Maximov, E.-L. Sarwe, T.G.I. Ling, M. Keil, and L. Montelius, Microelectron. Eng., 61-62, 441 (2002).
19. G. Menges, W. Michaeli, and P. Mohren, How to Make Injection Molds, Hanser Publishers, Munich (2001).
20. S. Pamidighantam, W. Laureyn, C. Rusu, K. Baert, R. Puers, and H.A.C. Tilmans, Sens. Actuator Phys., 103, 202 (2003).
21. D.J. Resnick, D.P. Mancini, S.V. Sreenivasan, and C.G. Willson, Semicond. Int., 25, 71 (2002).
22. M. Van Stappen, K. Vandierendonck, C. Mol, E. Beeckman, and E. De Clercq, Surf. Coat. Technol., 142-144, 143 (2001).
23. N.-G. Cha and J.-G. Park, "Antistiction Layers for Nano Imprinting Lithography," in Nanomanufacturing Handbook, A.A. Busnaina, Ed., CRC Press, Boca Raton, FL, 183-215 (2007).
24. J.H. Bruning, Proc. SPIE, 3050, 24 (1997).
25. A. Chandekar, M. Alabran, S.K. Sengupta, J.S. Lee, J.L. Mead, C.M.F. Barry, J.E. Whitten, S. Somu, and A.A. Busnaina, Microelectr. Eng., 85, 187 (2008).
26. Bayer Material Science, "Texin 990 ASTM Datasheet," Ed 31.01.2006 (2006).
27. F. Schreiber, Prog. Surf. Sci., 65(5-8), 151 (2000).
28. M. Wanebo, B. Kobrin, F. Helmrich, and J. Chinn, Proceedings International Symposium on Advanced Packaging Materials: Processes, Properties and Interfaces 2005, 136 (2005).
29. T.M. Mayer, M.P.D. Boer, N.D. Shinn, P.J. Clews, and T.A. Michalske, J. Vac. Sci. Technol. B, 18, 2433 (2000).
30. C. Srirojpinyo, S.-H. Yoon, J.S. Lee, J.L. Mead, and C.M.F. Barry, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 63, 743 (2005).
31. M.W. Alabran, J.L. Mead, C.M.F. Barry, D.J. Carter, and A.A. Busnaina, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 65, 1978 (2007).
32. K. Park, B. Kim, and D. Yao, Polym. Plast. Technol. Eng., 45, 897 (2006).
33. D. Yao and B. Kim, Polym. Plast. Technol. Eng., 41, 819 (2002).
34. O. Murakami, K. Yamada, M. Kotaki, and H. Hamada, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 64, 2526 (2006).
35. H. Yokoi, X. Han, T. Takahashi, and W.K. Kim, Polym. Eng. Sci., 46, 1140 (2006).
36. D. Grewell, A. Mokhtarzadeh, A. Benatar, C. Lu, and L.J. Lee, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 61, 1094 (2003).
37. M. Alabran, "A Study of the Effects of Various Injection Molding Processing Conditions on Nano-scale Replication for High-rate Manufacturing," M.S. Thesis, University of Massachusetts, Lowell (2006).
38. R. Thiruvenkataswamy, S.-H. Yoon, J.L. Mead, and C.M.F. Barry, Proc. Ann. Tech. Conf. Soc. Plast. Eng., 66, 2463 (2008).