Critical factors for nanoscale injection molding

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 6380, Issue , 2006, Pages

  Yoon, Sung Hwan ^a   Lee, Junseok ^a   Park, Keun ^b   Mead, Joey L ^a   Matsui, Shinji ^c   Barry, Carol M F ^a  

^a UNIVERSITY OF MASSACHUSETTS   (United States)

^b Seoul National University of Science and Technology   (South Korea)

^c UNIVERSITY OF HYOGO   (Japan)

Author keywords

Nanoscale injection molding; Polycarbonate degradation; Silicon insert; Surface adhesion

Indexed keywords

ADHESION; OPTICAL SYSTEMS; POLYCARBONATES; SHRINKAGE; SURFACE ROUGHNESS; SURFACE STRUCTURE;

NANOSCALE INJECTION MOLDING; POLYCARBONATE DEGRADATION; SILICON INSERT; SURFACE ADHESION;

INJECTION MOLDING;

EID: 33846194638     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.686310     Document Type: Conference Paper

References (31)

1. J. Fröhling, "Hot Embossing an Imprinting Technology enables a broad range of Bio and Optical Applications in the 10E-6 and 10E-9 range," in Ninth International Conference on Miniaturized Systems for Chemistry and Life Sciences (Boston, 2005).
2. J. Graham, "Lab-on-a-chip market report optimistic," in IVD Technology (2002).
3. Hella-C Scheer, H. Schulz, T. Hoffmann, and C. M. S. Torres, "Nanoimprint techniques," in Handbook of Thin Film Materials, H. S. Nalwa, ed. (Academic Press, San Diego, 2001), pp. 1-61.
4. S. Y. Chou, P. R. Krauss, and P. J. Renstrom, "Imprint of sub-25 nm vias and trenches in polymers," Applied Physics Letters 67, 3114-3116 (1995).
5. H. Becker, and U. Heim, "Silicon as tool material for polymer hot embossing," in IEEE International Conference on Micro Electro Mechanical Systems, (Institute of Electrical and Electronics Engineers, Orlando, 1999), pp. 228-231.
6. H. Becker, and L. E. Locascio, "Polymer microfluidic devices," Talanta 56, 267-287 (2002).
7. STEAG_HamaTech, "http://www.steag-hamatech.com/cms/ pegasus+M52087573ab0.html," (STEAG HamaTech group, 2005).
8. B. Fay, "Advanced optical lithography development, from UV to EUV," Microelectronic Engineering 61-62, 11-24 (2002).
9. F. Lehmann, G. Richter, T. Borzenko, V. Hock, G. Schmidt, and L. W. Molenkamp, "Fabrication of sub-10-nm Au-Pd structures using 30 keV electron beam lithography and lift-off," Microelectronic Engineering 65, 327-333 (2003).
10. W. Lee, M. K. Jin, W. C. Yoo, and J. K. Lee, "Nanostructuring of a Polymeric Substrate with Well-Defined Nanometer-Scale Topography and Tailored Surface Wettability," Langmuir 20, 7665-7669 (2004).
11. L. J. Heyderman, H. Schift, C. David, B. Ketterer, M. A. d. Maur, and J. Gobrecht, "Nanofabrication using hot embossing lithography and electroforming," Microelectronic Engineering 57-58, 375-380 (2001).
12. J. Shah, Y.-C. Su, and L. Lin, "Implementation and Analysis of Polymeric Microstructure Replication by Micro Injection Molding," in Proceedings of Micro-Electro-Mechanical Systems (ASME International Mechanical Engineering Congress and Exposition Nashville, TN, 1999), pp. 295-302.
13. L. Yu, C. G. Koh, K. W. Koelling, L. J. Lee, and M. J. Madou, "Experimental and numerical analysis of thin-wall injection molding with micro-features," in Annual Technical Conference - Society of Plastics Engineers, (2001), pp. 785-789.
14. A. D'Amore, M. Gabriel, W. Haese, H. Schift, and W. Kaiser, "Concentration of Information," in Kunststoffe plast europe, (2004), pp. 4-7.
15. S.-h. Yoon, C. Srirojpinyo, J. Lee, C. Sung, J. L. Mead, and C. M. F. Barry, "The Effects of Tooling Surfaces on Injection Molded Nanofeatures," in ANTEC 2004, (Society of Plastics Engineers, Chicago, 2004), pp. 738-742.
16. H. Schift, C. David, M. Gabriel, J. Gobrecht, L. J. Heyderman, W. Kaiser, S. Koppel, and L. Scandella, "Nanoreplication in polymers using hot embossing and injection molding," Microelectronic Engineering 53, 171-174 (2000).
17. S.-h. Yoon, C. Srirojpinyo, J. S. Lee, J. L. Mead, S. Matsui, and C. M. F. Barry, "Evaluation of novel tooling for nanoscale injection molding," in SPIE International Symposia, Smart Structures & Materials/NDE, (SPIE-The International Society for Optical Engineering, San Diego, 2005), pp. 107-116.
18. C. Srirojpinyo, S.-h. Yoon, J. Lee, C. Sung, J. L. Mead, and C. M. F. Barry, "Effects of materials when injection molding nano-scale features," in Annual Technical Conference - Society of Plastics Engineers, (Chicago, 2004), pp. 743-747.
19. F.-B. Li, G. E. Thompson, and R. C. Newman, "Force modulation atomic force microscopy: background, development and application to electrodeposited cerium oxide films," Applied Surface Science 126, 21 (1998).
20. P. Heyl, T. Olschewski, and R. W. Wijnaendts, "Manufacturing of 3D structures for micro-tools using laser ablation," Microelectronic Engineering 57-58, 775-780 (2001).
21. H. Schift, A. D'Amore, C. David, M. Gabriel, J. Gobrecht, W. Kaiser, and D. Simoneta, "Quantitative analysis of the molding of nanostructures", J. of Vac. Sci. Technol. B 18 3564-3568 (2000).
22. Z. Li, M. Tolan, T. Hohr, D. Kharas, S. Qu, J. Sokolov, M. H. Rafailovich, H. Lorenz, J. P. Kotthaus, J. Wang, S. K. Sinha, and A. Gibaud, "Polymer Thin Films on Patterned Si Surfaces," Macromolecules 31, 1915-1920 (1998).
23. "AFM Image Artifacts."
24. K. Mönkkönen, T. T. Pakkanen, J. Hietala, E. J. Pääkkönen, P. Pääkkönen, T. Jää skeläinen, and T. Kaikuranta, "Replication of sub-micron features using amorphous thermoplastics," Polymer Engineering & Science 42, 1600-1608 (2002).
25. J. A. Pelesko, and D. H. Bernstein, Modeling MEMS and NEMS (Chapman & Hall/CRC, 2003).
26. Y. Kim, J. Bae, H. Kim, and S. Kang, "Modelling of passive heating for replication of sub-micron patterns in optical disk substrates," Journal of Physics D: Applied Physics 37, 1319-1326 (2004).
27. L. Lieng-Huang, "Mechanisms of thermal degradation of phenolic condensation polymers. I. Studies on the thermal stability of polycarbonate," Journal of Polymer Science Part A: General Papers 2, 2859-2873 (1964).
28. C. Srirojpinyo, "Interfacial Effects in the Replication of Molded Polymer Nanofeatures," in Plastics Engineering, ( University of Massachusetts Lowell, Lowell, 2005).
29. C. Srirojpinyo, S.-h. Yoon, J. S. Lee, J. L. Mead, and C. M. F. Barry, "Interfacial Effects in Replication of Nano-scale features," in Annual Technical Conference - Society of Plastics Engineers (Boston, 2005), pp. 754-758.
30. I. Dris, W. Bushko, and A. Avagliano, "Material and process parameters and their effects on the degree of groove replication in DVD disks," in Proceedings of SPIE-The International Society for Optical Engineering, (SPIE-The International Society for Optical Engineering, 2002), pp. 45-54.
31. R. A. Malloy, Plastics Part Design for Injection Molding (Hanser Gardner Publications, 1994).