메뉴 건너뛰기




Volumn 22, Issue , 2016, Pages 165-213

Mechanical particle-size reduction techniques

Author keywords

Cryomilling; Drug particle size; Dry milling; High pressure homogenization; Microfluidization; Nanocrystal; Nanoedge technology; Piston gap homogenization; Wet media milling; Wet milling

Indexed keywords

AIR JET MILLING; ANALYTIC METHOD; CRYOGENIC MILLING; DISSOLUTION RATE CONSTANT; DRUG SOLUBILITY; DRY MILLING; FLOW RATE; GEOMETRY; HEAT SENSITIVITY; HIGH PRESSURE HOMOGENIZATION TECHNIQUE; MECHANICS; MICROFLUIDIZER; NANOTECHNOLOGY; NONHUMAN; PARTICLE SIZE REDUCTION; PHARMACEUTICS; PHYSICAL PARAMETERS; PISTON GAP HOMOGENIZER; PRIORITY JOURNAL; TABLET FRIABILITY; TABLET HARDNESS; TABLET MANUFACTURE; WET MILLING;

EID: 85081148163     PISSN: 22107371     EISSN: 2210738X     Source Type: Book Series    
DOI: 10.1007/978-3-319-42609-9_4     Document Type: Chapter
Times cited : (13)

References (134)
  • 1
    • 84884965014 scopus 로고    scopus 로고
    • Impact of process parameters on the breakage kinetics of poorly water-soluble drugs during wet stirred media milling: A microhydrodynamic view
    • Afolabi A, Akinlabi O, Bilgili E (2014) Impact of process parameters on the breakage kinetics of poorly water-soluble drugs during wet stirred media milling: a microhydrodynamic view. Eur J Pharm Sci 51:75-86, http://doi.org/10.1016/j.ejps.2013.09.002
    • (2014) Eur J Pharm Sci , vol.51 , pp. 75-86
    • Afolabi, A.1    Akinlabi, O.2    Bilgili, E.3
  • 2
    • 2142728539 scopus 로고    scopus 로고
    • Solid-state characterization of rifampicin samples and its biopharmaceutic relevance
    • Agrawal S, Ashokraj Y, Bharatam PV, Pillai O, Panchagnula R (2004) Solid-state characterization of rifampicin samples and its biopharmaceutic relevance. Eur J Pharm Sci 22(2-3):127-144. doi:10.1016/j.ejps.2004.02.011
    • (2004) Eur J Pharm Sci , vol.22 , Issue.2-3 , pp. 127-144
    • Agrawal, S.1    Ashokraj, Y.2    Bharatam, P.V.3    Pillai, O.4    Panchagnula, R.5
  • 3
    • 78650275970 scopus 로고    scopus 로고
    • SmartCrystal combination technology—scale up from lab to pilot scale and long term stability
    • Al Shaal L, Müller RH, Shegokar R (2010) smartCrystal combination technology—scale up from lab to pilot scale and long term stability. Pharmazie 65(12):877-884
    • (2010) Pharmazie , vol.65 , Issue.12 , pp. 877-884
    • Al Shaal, L.1    Müller, R.H.2    Shegokar, R.3
  • 4
    • 0345399409 scopus 로고
    • The modern fluid energy mill
    • Albus FE (1964) The modern fluid energy mill. Chem Eng Progr 60(6):102-106
    • (1964) Chem Eng Progr , vol.60 , Issue.6 , pp. 102-106
    • Albus, F.E.1
  • 5
  • 6
    • 68749094964 scopus 로고    scopus 로고
    • Rotor-stator mixing devices
    • Paul E, Atiemo-Obeng V, Kresta S, Wiley-Interscience, Hoboken
    • Atiemo-Obeng V, Calabrese R (2004) Rotor-stator mixing devices. In: Paul E, Atiemo-Obeng V, Kresta S (eds) Handbook of industrial mixing: science and practice. Wiley-Interscience, Hoboken, pp 479-505
    • (2004) Handbook of Industrial Mixing: Science and Practice , pp. 479-505
    • Atiemo-Obeng, V.1    Calabrese, R.2
  • 7
    • 14644420199 scopus 로고    scopus 로고
    • Challenges in the scale-up of particulate processes—an industrial perspective
    • Bell TA (2005) Challenges in the scale-up of particulate processes—an industrial perspective. Powder Tech 150(2):60-71. doi:10.1016/j.powtec.2004.11.023
    • (2005) Powder Tech , vol.150 , Issue.2 , pp. 60-71
    • Bell, T.A.1
  • 8
    • 2642570787 scopus 로고    scopus 로고
    • Fluidised-bed jet milling of pharmaceutical powders
    • Bentham AC, Kwan CC, Boerefijn R, Ghadiri M (2004) Fluidised-bed jet milling of pharmaceutical powders. Powder Tech 141(3):233-238. doi:10.1016/j.powtec.2004.01.024
    • (2004) Powder Tech , vol.141 , Issue.3 , pp. 233-238
    • Bentham, A.C.1    Kwan, C.C.2    Boerefijn, R.3    Ghadiri, M.4
  • 9
    • 0037723978 scopus 로고    scopus 로고
    • Coadsorption of sodium dodecyl sulfate with hydrophobically modified nonionic cellulose polymers. 1. Role of polymer hydrophobic modification
    • Berglund K, Przybycien T, Tilton R (2003) Coadsorption of sodium dodecyl sulfate with hydrophobically modified nonionic cellulose polymers. 1. Role of polymer hydrophobic modification. Langmuir 19(7):2705-2713. doi:10.1021/la026429g
    • (2003) Langmuir , vol.19 , Issue.7 , pp. 2705-2713
    • Berglund, K.1    Przybycien, T.2    Tilton, R.3
  • 10
    • 84869487988 scopus 로고    scopus 로고
    • A combined microhydrodynamics-polymer adsorption analysis for elucidation of the roles of stabilizers in wet stirred media milling
    • Bilgili E, Afolabi A (2012) A combined microhydrodynamics-polymer adsorption analysis for elucidation of the roles of stabilizers in wet stirred media milling. Int J Pharm 439(1-2): 193-206. doi:10.1016/j.ijpharm.2012.09.040
    • (2012) Int J Pharm , vol.439 , Issue.1-2 , pp. 193-206
    • Bilgili, E.1    Afolabi, A.2
  • 11
    • 0023709168 scopus 로고
    • Physicochemical aspects of drug release VIII. The relation between particle size and surface specific dissolution rate in agitated suspensions
    • Bisrat M, Nyström C (1988) Physicochemical aspects of drug release VIII. The relation between particle size and surface specific dissolution rate in agitated suspensions. Int J Pharm 47(1-3):223-231. doi:10.1016/0378-5173(88)90235-9
    • (1988) Int J Pharm , vol.47 , Issue.1-3 , pp. 223-231
    • Bisrat, M.1    Nyström, C.2
  • 13
    • 13544276614 scopus 로고    scopus 로고
    • Energy distribution and particle trajectories in a grinding chamber of a stirred ball mill
    • Blecher L, Schwedes J (1996) Energy distribution and particle trajectories in a grinding chamber of a stirred ball mill. Int J Miner Process 44-45:617-627. doi:10.1016/0301-7516(95)00070-4
    • (1996) Int J Miner Process , vol.45 , pp. 617-627
    • Blecher, L.1    Schwedes, J.2
  • 14
    • 0029732501 scopus 로고    scopus 로고
    • Motion and stress intensity of grinding beads in a stirred media mill. Part 1: Energy density distribution and motion of single grinding beads
    • Blecher L, Kwade A, Schwedes J (1996) Motion and stress intensity of grinding beads in a stirred media mill. Part 1: energy density distribution and motion of single grinding beads. Powder Tech 86(1):59-68. doi:10.1016/0032-5910(95)03038-7
    • (1996) Powder Tech , vol.86 , Issue.1 , pp. 59-68
    • Blecher, L.1    Kwade, A.2    Schwedes, J.3
  • 16
    • 33748097805 scopus 로고    scopus 로고
    • Method to evaluate the dustiness of pharmaceutical powders
    • Boundy M, Leith D, Polton T (2006) Method to evaluate the dustiness of pharmaceutical powders. Ann Occup Hyg 50(5):453-458. doi:10.1093/annhyg/mel004
    • (2006) Ann Occup Hyg , vol.50 , Issue.5 , pp. 453-458
    • Boundy, M.1    Leith, D.2    Polton, T.3
  • 19
    • 67649641798 scopus 로고    scopus 로고
    • Air jet milling
    • Williams JC, Allen T, Elsevier, Amsterdam
    • Chamayou A, Dodds JA (2007) Air jet milling. In: Williams JC, Allen T (eds) Handbook of powder technology, vol 12. Elsevier, Amsterdam, pp 421-435
    • (2007) Handbook of Powder Technology , vol.12 , pp. 421-435
    • Chamayou, A.1    Dodds, J.A.2
  • 20
    • 0021797481 scopus 로고
    • Polymorphic transformation of some drugs under compression
    • Chan HK, Doelker E (1985) Polymorphic transformation of some drugs under compression. Drug Dev Ind Pharm 11(2-3):315-332. doi:10.3109/03639048509056874
    • (1985) Drug Dev Ind Pharm , vol.11 , Issue.2-3 , pp. 315-332
    • Chan, H.K.1    Doelker, E.2
  • 21
    • 0031859673 scopus 로고    scopus 로고
    • Micronization: A method of improving the bioavailability of poorly soluble drugs
    • Chaumeil J (1998) Micronization: a method of improving the bioavailability of poorly soluble drugs. Methods Find Exp Clin Pharmacol 20(3):211-216
    • (1998) Methods Find Exp Clin Pharmacol , vol.20 , Issue.3 , pp. 211-216
    • Chaumeil, J.1
  • 22
    • 28444458504 scopus 로고    scopus 로고
    • The effect of crystal morphology and mill type on milling induced crystal disorder
    • Chikhalia V, Forbes R, Storey R, Ticehurst M (2006) The effect of crystal morphology and mill type on milling induced crystal disorder. Eur J Pharm Sci 27(1):19-26. doi:10.1016/j.ejps.2005.08.013
    • (2006) Eur J Pharm Sci , vol.27 , Issue.1 , pp. 19-26
    • Chikhalia, V.1    Forbes, R.2    Storey, R.3    Ticehurst, M.4
  • 23
    • 33847127477 scopus 로고    scopus 로고
    • Particle engineering for pulmonary drug delivery
    • Chow AHL, Tong HHY, Chattopadhyay P, Shekunov BY (2007) Particle engineering for pulmonary drug delivery. Pharm Res 24(3):411-437. doi:10.1007/s11095-006-9174-3
    • (2007) Pharm Res , vol.24 , Issue.3 , pp. 411-437
    • Chow, A.1    Tong, H.2    Chattopadhyay, P.3    Shekunov, B.Y.4
  • 24
    • 0003052976 scopus 로고    scopus 로고
    • Formulation of proteins for pulmonary drug delivery
    • McNally EJ, Marcel Dekker, New York
    • Clark AR, Shire SJ (2000) Formulation of proteins for pulmonary drug delivery. In: McNally EJ (ed) Protein formulation and delivery. Marcel Dekker, New York, pp 201-234
    • (2000) Protein Formulation and Delivery , pp. 201-234
    • Clark, A.R.1    Shire, S.J.2
  • 25
    • 0036610379 scopus 로고    scopus 로고
    • Narrowing down equipment choices for particle-size reduction
    • Clement S, Purutyan H (2002) Narrowing down equipment choices for particle-size reduction. Chem Eng Prog 98(6):50
    • (2002) Chem Eng Prog , vol.98 , Issue.6 , pp. 50
    • Clement, S.1    Purutyan, H.2
  • 26
    • 67349117161 scopus 로고    scopus 로고
    • Drug mechanochemical activation
    • Colombo I, Grassi G, Grassi M (2009) Drug mechanochemical activation. J Pharm Sci 98(11):3961-3986
    • (2009) J Pharm Sci , vol.98 , Issue.11 , pp. 3961-3986
    • Colombo, I.1    Grassi, G.2    Grassi, M.3
  • 28
    • 60449088706 scopus 로고    scopus 로고
    • Influence of flaws and crystal properties on particle fracture in a jet mill
    • de Vegt O, Vromans H, den Toonder J, van der Voort Maarschalk K (2009) Influence of flaws and crystal properties on particle fracture in a jet mill. Powder Tech 191(1-2):72-77. doi:10.1016/j. powtec.2008.09.014
    • (2009) Powder Tech , vol.191 , Issue.1-2 , pp. 72-77
    • De Vegt, O.1    Vromans, H.2    Den Toonder, J.3    Van Der Voort Maarschalk, K.4
  • 29
    • 0028955114 scopus 로고
    • Influence of cohesive properties of micronized drug powders on particle size analysis
    • de Villiers M (1995) Influence of cohesive properties of micronized drug powders on particle size analysis. J Pharm Biomed Anal 13(3):191-198. doi:10.1016/0731-7085(95)01274-O
    • (1995) J Pharm Biomed Anal , vol.13 , Issue.3 , pp. 191-198
    • De Villiers, M.1
  • 30
    • 0029811192 scopus 로고    scopus 로고
    • An analysis of fine grinding and aggregation of poorly soluble drug powders in a vibrating ball mill
    • de Villiers M, Tiedt L (1996) An analysis of fine grinding and aggregation of poorly soluble drug powders in a vibrating ball mill. Pharmazie 51(8):564-567
    • (1996) Pharmazie , vol.51 , Issue.8 , pp. 564-567
    • De Villiers, M.1    Tiedt, L.2
  • 31
    • 52449096929 scopus 로고    scopus 로고
    • Accessed 25 Jan 2000
    • Dearn AR (2000) Atovaquone pharmaceutical compositions. http://www.google.com/patents/about?id=2iEDAAAAEBAJ&dq=Atovaquone+pharmaceutical+compositions. Accessed 25 Jan 2000
    • (2000) Atovaquone Pharmaceutical Compositions
    • Dearn, A.R.1
  • 32
    • 34547956346 scopus 로고    scopus 로고
    • Poly(D, l-lactide-co-glycolide) (PLGA) nanoparticles prepared by high pressure homogenization for paclitaxel chemotherapy
    • Dong Y, Feng S (2007) Poly(d, l-lactide-co-glycolide) (PLGA) nanoparticles prepared by high pressure homogenization for paclitaxel chemotherapy. Int J Pharm 342(1-2):208-214. doi:10.1016/j.ijpharm.2007.04.031
    • (2007) Int J Pharm , vol.342 , Issue.1-2 , pp. 208-214
    • Dong, Y.1    Feng, S.2
  • 33
    • 85198040143 scopus 로고
    • Dust explosion hazards in the ferro-alloys industry
    • Eckhoff R (1994) Dust explosion hazards in the ferro-alloys industry. In: 52nd Electric Furnace Conference, pp 283-302
    • (1994) In: 52Nd Electric Furnace Conference , pp. 283-302
    • Eckhoff, R.1
  • 34
    • 85133244233 scopus 로고    scopus 로고
    • Dust explosions—origin, propagation, prevention, and mitigation: An overview
    • EckhoffR, 3rd edn. Gulf Professional, New York
    • Eckhoff R (2003) Dust explosions—origin, propagation, prevention, and mitigation: an overview. In: EckhoffR (ed) Dust explosions in the process industries, 3rd edn. Gulf Professional, New York, pp 1-156
    • (2003) Dust Explosions in the Process Industries , pp. 1-156
    • Eckhoff, R.1
  • 35
    • 25444461181 scopus 로고    scopus 로고
    • Current status and expected future trends in dust explosion research
    • Eckhoff R (2005) Current status and expected future trends in dust explosion research. J Loss Prev Process Indust 18(4-6):225-237. doi:10.1016/j.jlp.2005.06.012
    • (2005) J Loss Prev Process Indust , vol.18 , Issue.4-6 , pp. 225-237
    • Eckhoff, R.1
  • 36
    • 85081149948 scopus 로고    scopus 로고
    • Accessed 9 Dec
    • Elan Drug Technologies—Commercialized Products. http://www.elandrugtechnologies.com/nanocrystal_technology/commercialised. Accessed 9 Dec 2010
    • (2010)
  • 37
    • 19844380706 scopus 로고    scopus 로고
    • Microhydrodynamic analysis of nanogrinding in stirred media mills
    • Eskin D, Zhupanska O, Hamey R, Moudgil B, Scarlett B (2005a) Microhydrodynamic analysis of nanogrinding in stirred media mills. AIChE J 51(5):1346-1358, http://doi.org/10.1002/aic.10392
    • (2005) Aiche J , vol.51 , Issue.5 , pp. 1346-1358
    • Eskin, D.1    Zhupanska, O.2    Hamey, R.3    Moudgil, B.4    Scarlett, B.5
  • 38
    • 23944508609 scopus 로고    scopus 로고
    • Microhydrodynamics of stirred media milling
    • Eskin D, Zhupanska O, Hamey R, Moudgil B, Scarlett B (2005b) Microhydrodynamics of stirred media milling. Powder Technol 156(2-3):95-102, http://doi.org/10.1016/j.powtec.2005.04.004
    • (2005) Powder Technol , vol.156 , Issue.2-3 , pp. 95-102
    • Eskin, D.1    Zhupanska, O.2    Hamey, R.3    Moudgil, B.4    Scarlett, B.5
  • 40
    • 79952077386 scopus 로고    scopus 로고
    • Milling of active pharmaceutical ingredients
    • Swarbrick J, 3rd edn. Informa Healthcare, New York
    • Fisher E (2006) Milling of active pharmaceutical ingredients. In: Swarbrick J (ed) Encyclopedia of pharmaceutical technology, 3rd edn. Informa Healthcare, New York, pp 2339-2351
    • (2006) Encyclopedia of Pharmaceutical Technology , pp. 2339-2351
    • Fisher, E.1
  • 41
    • 85081150281 scopus 로고    scopus 로고
    • Size reduction overview: Shear, compression, and impact
    • Friedrich A (2001) Size reduction overview: shear, compression, and impact. Powder Bulk Eng 15(6):19-25
    • (2001) Powder Bulk Eng , vol.15 , Issue.6 , pp. 19-25
    • Friedrich, A.1
  • 42
    • 0037132475 scopus 로고    scopus 로고
    • Talc grinding in an opposed air jet mill: Start-up, product quality and production rate optimization
    • Godet-Morand L, Chamayou A, Dodds JA (2002) Talc grinding in an opposed air jet mill: start-up, product quality and production rate optimization. Powder Technol 128(2-3):306-313. doi:10.1016/S0032-5910(02)00172-9
    • (2002) Powder Technol , vol.128 , Issue.2-3 , pp. 306-313
    • Godet-Morand, L.1    Chamayou, A.2    Dodds, J.A.3
  • 43
    • 0033964139 scopus 로고    scopus 로고
    • Nanosuspensions of poorly soluble drugs: Reproducibility of small scale production
    • Grau MJ, Kayser O, Muller RH (2000) Nanosuspensions of poorly soluble drugs: reproducibility of small scale production. Int J Pharm 196(2):155-159. doi:10.1016/S0378-5173(99)00411-1
    • (2000) Int J Pharm , vol.196 , Issue.2 , pp. 155-159
    • Grau, M.J.1    Kayser, O.2    Muller, R.H.3
  • 44
    • 12844283957 scopus 로고    scopus 로고
    • High-throughput drug discovery: What can we expect from HTS?
    • Gribbon P, Andreas S (2005) High-throughput drug discovery: what can we expect from HTS? Drug Discov Today 10(1):17-22. doi:10.1016/S1359-6446(04)03275-1
    • (2005) Drug Discov Today , vol.10 , Issue.1 , pp. 17-22
    • Gribbon, P.1    Reas, S.2
  • 45
    • 84936769857 scopus 로고    scopus 로고
    • Methods of estimating the dustiness of industrial powders—a review
    • Hamelmann F, Schmidt E (2003) Methods of estimating the dustiness of industrial powders—a review. Kona 21:7-18
    • (2003) Kona , vol.21 , pp. 7-18
    • Hamelmann, F.1    Schmidt, E.2
  • 46
    • 1142303337 scopus 로고    scopus 로고
    • What is the true solubility advantage for amorphous pharmaceuticals?
    • Hancock BC, Parks M (2000) What is the true solubility advantage for amorphous pharmaceuticals? Pharm Res 17(4):397-404
    • (2000) Pharm Res , vol.17 , Issue.4 , pp. 397-404
    • Hancock, B.C.1    Parks, M.2
  • 47
    • 77955643465 scopus 로고    scopus 로고
    • Effect of particle formulation on dry powder inhalation efficiency
    • Hassan S, Lau R (2010) Effect of particle formulation on dry powder inhalation efficiency. Curr Pharm Des 16(21):2377-2387
    • (2010) Curr Pharm Des , vol.16 , Issue.21 , pp. 2377-2387
    • Hassan, S.1    Lau, R.2
  • 48
    • 43249131147 scopus 로고    scopus 로고
    • Preparation and evaluation of microparticles from thiolated polymers via air jet milling
    • Hoyer H, Schlocker W, Krum K, Bernkop-Schnürch A (2008) Preparation and evaluation of microparticles from thiolated polymers via air jet milling. Eur J Pharm Biopharm 69(2):476-485. doi:10.1016/j.ejpb.2008.01.009
    • (2008) Eur J Pharm Biopharm , vol.69 , Issue.2 , pp. 476-485
    • Hoyer, H.1    Schlocker, W.2    Krum, K.3    Bernkop-Schnürch, A.4
  • 49
    • 0029992639 scopus 로고    scopus 로고
    • Use of microfluidizer processing for preparation of pharmaceutical suspensions
    • Illig K, Mueller R, Ostrander K, Swanson J (1996) Use of microfluidizer processing for preparation of pharmaceutical suspensions. Pharmaceut Tech 20(10):78-88
    • (1996) Pharmaceut Tech , vol.20 , Issue.10 , pp. 78-88
    • Illig, K.1    Mueller, R.2    Ostrander, K.3    Swanson, J.4
  • 51
    • 0033956297 scopus 로고    scopus 로고
    • Nanosuspensions as a new approach for the formulation for the poorly soluble drug tarazepide
    • Jacobs C, Kayser O, Müller RH (2000) Nanosuspensions as a new approach for the formulation for the poorly soluble drug tarazepide. Int J Pharm 196(2):161-164. doi:10.1016/S0378-5173(99)00412-3
    • (2000) Int J Pharm , vol.196 , Issue.2 , pp. 161-164
    • Jacobs, C.1    Kayser, O.2    Müller, R.H.3
  • 53
    • 28444461830 scopus 로고    scopus 로고
    • Drug nanocrystals of poorly soluble drugs produced by high pressure homogenisation
    • Keck C, Muller R (2006) Drug nanocrystals of poorly soluble drugs produced by high pressure homogenisation. Eur J Pharm Biopharm 62(1):3-16. doi:10.1016/j.ejpb.2005.05.009
    • (2006) Eur J Pharm Biopharm , vol.62 , Issue.1 , pp. 3-16
    • Keck, C.1    Muller, R.2
  • 54
    • 76149089279 scopus 로고    scopus 로고
    • Second generation of drug nanocrystals for delivery of poorly soluble drugs: SmartCrystals technology
    • Keck CM, Kobierski S, Mauludin R, Müller RH (2008) Second generation of drug nanocrystals for delivery of poorly soluble drugs: smartCrystals technology. Dosis 24(2):124-128
    • (2008) Dosis , vol.24 , Issue.2 , pp. 124-128
    • Keck, C.M.1    Kobierski, S.2    Mauludin, R.3    Müller, R.H.4
  • 55
    • 34548049483 scopus 로고    scopus 로고
    • Nanosizing—oral formulation development and biopharmaceutical evaluation
    • Kesisoglou F, Panmai S, Wu Y (2007) Nanosizing—oral formulation development and biopharmaceutical evaluation. Adv Drug Deliv Rev 59(7):631-644. doi:10.1016/j.addr.2007.05.003
    • (2007) Adv Drug Deliv Rev , vol.59 , Issue.7 , pp. 631-644
    • Kesisoglou, F.1    Panmai, S.2    Wu, Y.3
  • 56
    • 5344234787 scopus 로고    scopus 로고
    • The role of solid nanoparticle technology in the parenteral delivery of poorly water-soluble drugs
    • Kipp J (2004) The role of solid nanoparticle technology in the parenteral delivery of poorly water-soluble drugs. Int J Pharm 284(1-2):109-122. doi:10.1016/j.ijpharm.2004.07.019
    • (2004) Int J Pharm , vol.284 , Issue.1-2 , pp. 109-122
    • Kipp, J.1
  • 59
    • 33646431416 scopus 로고    scopus 로고
    • Depth profiling of compression-induced disorders and polymorphic transition on tablet surfaces with grazing incidence x-ray diffraction
    • Koivisto M, Heinänen P, Tanninen VP, Lehto V (2006) Depth profiling of compression-induced disorders and polymorphic transition on tablet surfaces with grazing incidence x-ray diffraction. Pharm Res 23(4):813-820. doi:10.1007/s11095-006-9785-8
    • (2006) Pharm Res , vol.23 , Issue.4 , pp. 813-820
    • Koivisto, M.1    Heinänen, P.2    Tanninen, V.P.3    Lehto, V.4
  • 60
    • 0032710243 scopus 로고    scopus 로고
    • Wet comminution in stirred media mills—research and its practical application
    • Kwade A (1999) Wet comminution in stirred media mills—research and its practical application. Powder Tech 105(1-3):14-20. doi:10.1016/S0032-5910(99)00113-8
    • (1999) Powder Tech , vol.105 , Issue.1-3 , pp. 14-20
    • Kwade, A.1
  • 61
    • 0037295740 scopus 로고    scopus 로고
    • A stressing model for the description and optimization of grinding processes
    • Kwade A (2003) A stressing model for the description and optimization of grinding processes. Chem Eng Tech 26(2):199-205. doi:10.1002/ceat.200390029
    • (2003) Chem Eng Tech , vol.26 , Issue.2 , pp. 199-205
    • Kwade, A.1
  • 62
    • 0037154059 scopus 로고    scopus 로고
    • Breaking characteristics of different materials and their effect on stress intensity and stress number in stirred media mills
    • Kwade A, Schwedes J (2002) Breaking characteristics of different materials and their effect on stress intensity and stress number in stirred media mills. Powder Tech 122(2):109-121
    • (2002) Powder Tech , vol.122 , Issue.2 , pp. 109-121
    • Kwade, A.1    Schwedes, J.2
  • 63
    • 67649770413 scopus 로고    scopus 로고
    • Wet grinding in stirred media mills
    • Salman A, Ghadiri M, Hounslow M (eds), Particle breakage. Elsevier, Amsterdam
    • Kwade A, Schwedes J (2007) Wet grinding in stirred media mills. In: Salman A, Ghadiri M, Hounslow M (eds) Handbook of powder technology, vol 12, Particle breakage. Elsevier, Amsterdam, pp 251-382
    • (2007) Handbook of Powder Technology , vol.12 , pp. 251-382
    • Kwade, A.1    Schwedes, J.2
  • 64
    • 19644401254 scopus 로고    scopus 로고
    • Rotor-stator milling of APis-empirical scale-up parameters and theoretical relationships between the morphology and breakage of crystals
    • Lee I, Variankaval N, Lindemann C, Starbuck C (2004) Rotor-stator milling of APis-empirical scale-up parameters and theoretical relationships between the morphology and breakage of crystals. Am Pharmaceut Rev 7:120-123
    • (2004) Am Pharmaceut Rev , vol.7 , pp. 120-123
    • Lee, I.1    Variankaval, N.2    Lindemann, C.3    Starbuck, C.4
  • 65
    • 15244348244 scopus 로고    scopus 로고
    • Amphiphilic amino acid copolymers as stabilizers for the preparation of nanocrystal dispersion
    • Lee J, Lee S, Choi J, Yoo J, Ahn C (2005) Amphiphilic amino acid copolymers as stabilizers for the preparation of nanocrystal dispersion. Eur J Pharm Sci 24(5):441-449. doi:10.1016/j.ejps.2004.12.010
    • (2005) Eur J Pharm Sci , vol.24 , Issue.5 , pp. 441-449
    • Lee, J.1    Lee, S.2    Choi, J.3    Yoo, J.4    Ahn, C.5
  • 66
    • 84926457178 scopus 로고    scopus 로고
    • Sub-100 nm drug particle suspensions prepared via wet milling with low bead contamination through novel process intensification
    • Li M, Yaragudi N, Afolabi A, Dave R, Bilgili E (2015) Sub-100 nm drug particle suspensions prepared via wet milling with low bead contamination through novel process intensification. Chem Eng Sci 130:207-220, http://doi.org/10.1016/j.ces.2015.03.020
    • (2015) Chem Eng Sci , vol.130 , pp. 207-220
    • Li, M.1    Yaragudi, N.2    Afolabi, A.3    Dave, R.4    Bilgili, E.5
  • 67
    • 0034461768 scopus 로고    scopus 로고
    • Drug-like properties and the causes of poor solubility and poor permeability
    • Lipinski CA (2000) Drug-like properties and the causes of poor solubility and poor permeability. J Pharmacol Toxicol Methods 44(1):235-249. doi:10.1016/S1056-8719(00)00107-6
    • (2000) J Pharmacol Toxicol Methods , vol.44 , Issue.1 , pp. 235-249
    • Lipinski, C.A.1
  • 68
    • 0031024171 scopus 로고    scopus 로고
    • Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings
    • Lipinski CA, Lombardo F, Dominy BW, Feeney PJ (1997) Experimental and computational approaches to estimate solubility and permeability in drug discovery and development settings. Adv Drug Deliv Rev 23(1-3):3-25. doi:10.1016/S0169-409X(96)00423-1
    • (1997) Adv Drug Deliv Rev , vol.23 , Issue.1-3 , pp. 3-25
    • Lipinski, C.A.1    Lombardo, F.2    Dominy, B.W.3    Feeney, P.J.4
  • 71
    • 85081148920 scopus 로고    scopus 로고
    • Process optimization of a novel particle size reduction technology H 42
    • Abstract P33
    • Liu T, Müller RH, Möschwitzer JP (2012) Process optimization of a novel particle size reduction technology H 42. Tag Der Pharmazie, (Abstract P33), 25
    • (2012) Tag Der Pharmazie , pp. 25
    • Liu, T.1    Müller, R.H.2    Möschwitzer, J.P.3
  • 72
    • 41949100244 scopus 로고    scopus 로고
    • Drug nanoparticles: Formulating poorly water-soluble compounds
    • Merisko-Liversidge E, Liversidge G (2008) Drug nanoparticles: formulating poorly water-soluble compounds. Toxicol Pathol 36(1):43-48. doi:10.1177/0192623307310946
    • (2008) Toxicol Pathol , vol.36 , Issue.1 , pp. 43-48
    • Merisko-Liversidge, E.1    Liversidge, G.2
  • 73
    • 9044235775 scopus 로고    scopus 로고
    • Formulation and antitumor activity evaluation of nanocrystalline suspensions of poorly soluble anticancer drugs
    • Merisko-Liversidge E, Sarpotdar P, Bruno J, Hajj S, Wei L, Peltier N, Rake J et al (1996) Formulation and antitumor activity evaluation of nanocrystalline suspensions of poorly soluble anticancer drugs. Pharm Res 13(2):272-278
    • (1996) Pharm Res , vol.13 , Issue.2 , pp. 272-278
    • Merisko-Liversidge, E.1    Sarpotdar, P.2    Bruno, J.3    Hajj, S.4    Wei, L.5    Peltier, N.6    Rake, J.7
  • 74
    • 0037312695 scopus 로고    scopus 로고
    • Nanosizing: A formulation approach for poorly-water-soluble compounds
    • Merisko-Liversidge E, Liversidge G, Cooper E (2003) Nanosizing: a formulation approach for poorly-water-soluble compounds. Eur J Pharm Sci 18(2):113-120. doi:10.1016/S0928-0987(02)00251-8
    • (2003) Eur J Pharm Sci , vol.18 , Issue.2 , pp. 113-120
    • Merisko-Liversidge, E.1    Liversidge, G.2    Cooper, E.3
  • 75
    • 0344172594 scopus 로고    scopus 로고
    • Micronization of pharmaceutical substances in a spiral jet mill
    • Midoux N, Hosek P, Pailleres L, Authelin J (1999) Micronization of pharmaceutical substances in a spiral jet mill. Powder Tech 104(2):113-120. doi:10.1016/S0032-5910(99)00052-2
    • (1999) Powder Tech , vol.104 , Issue.2 , pp. 113-120
    • Midoux, N.1    Hosek, P.2    Pailleres, L.3    Authelin, J.4
  • 76
    • 33750071721 scopus 로고    scopus 로고
    • New method for the effective production of ultrafine drug nanocrystals
    • Moschwitzer J, Mueller RH (2006) New method for the effective production of ultrafine drug nanocrystals. J Nanosci Nanotechnol 6(9-10):3145-3153, http://doi.org/10.1166/jnn.2006.480
    • (2006) J Nanosci Nanotechnol , vol.6 , Issue.9-10 , pp. 3145-3153
    • Moschwitzer, J.1    Mueller, R.H.2
  • 79
    • 0344211012 scopus 로고    scopus 로고
    • From the product and process requirements to the milling facility
    • Muller F, Polke R (1999) From the product and process requirements to the milling facility. Powder Tech 105(1-3):2-13. doi:10.1016/S0032-5910(99)00112-6
    • (1999) Powder Tech , vol.105 , Issue.1-3 , pp. 2-13
    • Muller, F.1    Polke, R.2
  • 83
    • 0035937599 scopus 로고    scopus 로고
    • Nanosuspensions as particulate drug formulations in therapy: Rationale for development and what we can expect for the future
    • Muller RH, Jacobs C, Kayser O (2001) Nanosuspensions as particulate drug formulations in therapy: rationale for development and what we can expect for the future. Adv Drug Deliv Rev 47(1):3-19. doi:10.1016/S0169-409X(00)00118-6
    • (2001) Adv Drug Deliv Rev , vol.47 , Issue.1 , pp. 3-19
    • Muller, R.H.1    Jacobs, C.2    Kayser, O.3
  • 84
    • 1842697613 scopus 로고    scopus 로고
    • Disso Cubes: A novel formulation for poorly soluble and poorly bioavailable drugs
    • Rathbone M, Hadgraft J, Roberts M, Marcel Dekker, New York
    • Muller R, Jacobs C, Kayser O (2003) Disso Cubes: a novel formulation for poorly soluble and poorly bioavailable drugs. In: Rathbone M, Hadgraft J, Roberts M (eds) Modified-release drug delivery technology, 1st edn. Marcel Dekker, New York, pp 135-149
    • (2003) Modified-Release Drug Delivery Technology, 1St Edn , pp. 135-149
    • Muller, R.1    Jacobs, C.2    Kayser, O.3
  • 86
    • 33751163286 scopus 로고    scopus 로고
    • Manufacturing of nanoparticles by milling and homogenization techniques
    • Gupta R, Kompella U, Taylor & Francis, New York
    • Muller R, Moschwitzer J, Bushrab F (2006) Manufacturing of nanoparticles by milling and homogenization techniques. In: Gupta R, Kompella U (eds) Nanoparticle technology for drug delivery. Taylor & Francis, New York, pp 21-51
    • (2006) Nanoparticle Technology for Drug Delivery , pp. 21-51
    • Muller, R.1    Moschwitzer, J.2    Bushrab, F.3
  • 87
    • 76649105411 scopus 로고    scopus 로고
    • Solubility advantage of amorphous pharmaceuticals: I. A thermodynamic analysis
    • Murdande SB, Pikal MJ, Shanker RM, Bogner RH (2010) Solubility advantage of amorphous pharmaceuticals: I. A thermodynamic analysis. J Pharm Sci 99:1254-1264. doi:10.1002/jps.21903
    • (2010) J Pharm Sci , vol.99 , pp. 1254-1264
    • Murdande, S.B.1    Pikal, M.J.2    Shanker, R.M.3    Bogner, R.H.4
  • 88
    • 10044227570 scopus 로고    scopus 로고
    • Comparison of various milling technologies for grinding pharmaceutical powders
    • Nakach M, Authelin J, Chamayou A, Dodds J (2004) Comparison of various milling technologies for grinding pharmaceutical powders. Miner Eng 74(Suppl 1):S173-S181. doi:10.1016/j.minpro.2004.07.039
    • (2004) Miner Eng , vol.74 , pp. S173-S181
    • Nakach, M.1    Authelin, J.2    Chamayou, A.3    Dodds, J.4
  • 89
    • 85081152021 scopus 로고    scopus 로고
    • Accessed 16 Dec 2010
    • New Food Pharma Systems Spiral Jet Mill: Introduction (2010) http://www.labx.com/v2/adsearch/detail3.cfm?adnumb=406756, Accessed 16 Dec 2010
    • (2010)
  • 90
    • 67649644737 scopus 로고    scopus 로고
    • Rotor impact mills
    • Salman A, Ghadiri M, Hounslow M, Particle breakage. Elsevier, Amsterdam
    • Nied R (2007) Rotor impact mills. In: Salman A, Ghadiri M, Hounslow M (eds) Handbook of powder technology, vol 12, Particle breakage. Elsevier, Amsterdam, pp 229-249
    • (2007) Handbook of Powder Technology , vol.12 , pp. 229-249
    • Nied, R.1
  • 91
    • 77954760983 scopus 로고    scopus 로고
    • One-step preparation of pharmaceutical nanocrystals using ultra cryo-milling technique in liquid nitrogen
    • Niwa T, Nakanishi Y, Danjo K (2010) One-step preparation of pharmaceutical nanocrystals using ultra cryo-milling technique in liquid nitrogen. Eur J Pharm Sci 41(1):78-85. doi:10.1016/j.ejps.2010.05.019
    • (2010) Eur J Pharm Sci , vol.41 , Issue.1 , pp. 78-85
    • Niwa, T.1    Nakanishi, Y.2    Danjo, K.3
  • 92
    • 33947487639 scopus 로고
    • The rate of solution of solid substances in their own solutions
    • Noyes AA, Whitney WR (1897) The rate of solution of solid substances in their own solutions. J Am Chem Soc 19(12):930-934. doi:10.1021/ja02086a003
    • (1897) J am Chem Soc , vol.19 , Issue.12 , pp. 930-934
    • Noyes, A.A.1    Whitney, W.R.2
  • 93
    • 78649648146 scopus 로고    scopus 로고
    • Pharmaceutical nanocrystals by nanomilling: Critical process parameters, particle fracturing and stabilization methods
    • Peltonen L, Hirvonen J (2010) Pharmaceutical nanocrystals by nanomilling: critical process parameters, particle fracturing and stabilization methods. J Pharm Pharmacol 62(11):1569-1579. doi:10.1111/j.2042-7158.2010.01022.x
    • (2010) J Pharm Pharmacol , vol.62 , Issue.11 , pp. 1569-1579
    • Peltonen, L.1    Hirvonen, J.2
  • 95
    • 4544383493 scopus 로고    scopus 로고
    • Nanosuspensions in drug delivery
    • Rabinow B (2004) Nanosuspensions in drug delivery. Nat Rev Drug Discov 3(9):785-796. doi:10.1038/nrd1494
    • (2004) Nat Rev Drug Discov , vol.3 , Issue.9 , pp. 785-796
    • Rabinow, B.1
  • 96
    • 85043634274 scopus 로고    scopus 로고
    • Formulation of water-insoluble antineoplastic agents as nanosuspensions using NANOEDGE formulation technology
    • Rabinow BE, Gupta P, Wong J, Papadopoulos P, Chaubal M (2004) Formulation of water-insoluble antineoplastic agents as nanosuspensions using NANOEDGE formulation technology. Cancer Res 64(7 Supplement):146
    • (2004) Cancer Res , vol.64 , Issue.7 , pp. 146
    • Rabinow, B.E.1    Gupta, P.2    Wong, J.3    Papadopoulos, P.4    Chaubal, M.5
  • 97
    • 1342281182 scopus 로고    scopus 로고
    • Micron-size drug particles: Common and novel micronization techniques
    • Rasenack N, Müller B (2004) Micron-size drug particles: common and novel micronization techniques. Pharm Dev Technol 9(1):1-13. doi:10.1081/PDT-120027417
    • (2004) Pharm Dev Technol , vol.9 , Issue.1 , pp. 1-13
    • Rasenack, N.1    Müller, B.2
  • 98
    • 85081146629 scopus 로고    scopus 로고
    • Trends and advances in cryogenic materials
    • Timmerhaus K, Reed R, Springer, Dordrecht
    • Reed R (2007) Trends and advances in cryogenic materials. In: Timmerhaus K, Reed R (eds) Cryogenic engineering: fifty years of progress. Springer, Dordrecht, pp 52-83
    • (2007) Cryogenic Engineering: Fifty Years of Progress , pp. 52-83
    • Reed, R.1
  • 99
    • 33646582376 scopus 로고    scopus 로고
    • Particle size limits to meet USP content uniformity criteria for tablets and capsules
    • Rohrs BR, Amidon GE, Meury RH, Secreast PJ, King HM, Skoug CJ (2006) Particle size limits to meet USP content uniformity criteria for tablets and capsules. J Pharm Sci 95(5):1049-1059. doi:10.1002/jps.20587
    • (2006) J Pharm Sci , vol.95 , Issue.5 , pp. 1049-1059
    • Rohrs, B.R.1    Amidon, G.E.2    Meury, R.H.3    Secreast, P.J.4    King, H.M.5    Skoug, C.J.6
  • 100
    • 84858671376 scopus 로고    scopus 로고
    • Nanocrystals: Comparison of the size reduction effectiveness of a novel combinative method with conventional top-down approaches
    • Salazar J, Ghanem A, Müller RH, Möschwitzer JP (2012) Nanocrystals: comparison of the size reduction effectiveness of a novel combinative method with conventional top-down approaches. Eur J Pharm Biopharm 81(1):82-90, http://doi.org/10.1016/j.ejpb.2011.12.015
    • (2012) Eur J Pharm Biopharm , vol.81 , Issue.1 , pp. 82-90
    • Salazar, J.1    Ghanem, A.2    Müller, R.H.3    Möschwitzer, J.P.4
  • 101
    • 80054686600 scopus 로고    scopus 로고
    • Process optimization of a novel production method for nanosuspensions using design of experiments (DoE)
    • Salazar J, Heinzerling O, Müller RH, Möschwitzer JP (2011) Process optimization of a novel production method for nanosuspensions using design of experiments (DoE). Int J Pharm 420(2):395-403, http://doi.org/10.1016/j.ijpharm.2011.09.003
    • (2011) Int J Pharm , vol.420 , Issue.2 , pp. 395-403
    • Salazar, J.1    Heinzerling, O.2    Müller, R.H.3    Möschwitzer, J.P.4
  • 102
    • 84876326377 scopus 로고    scopus 로고
    • Performance comparison of two novel combinative particle-size-reduction technologies
    • Salazar J, Müller RH, Möschwitzer JP (2013) Performance comparison of two novel combinative particle-size-reduction technologies. J Pharm Sci 102(5):1636-1649, http://doi.org/10.1002/jps.23475
    • (2013) J Pharm Sci , vol.102 , Issue.5 , pp. 1636-1649
    • Salazar, J.1    Müller, R.H.2    Möschwitzer, J.P.3
  • 103
    • 84922710442 scopus 로고    scopus 로고
    • Combinative particle size reduction technologies for the production of drug nanocrystals
    • Salazar J, Müller RH, Möschwitzer JP (2014) Combinative particle size reduction technologies for the production of drug nanocrystals. J Pharmaceut, Article ID 265754
    • (2014) J Pharmaceut
    • Salazar, J.1    Müller, R.H.2    Möschwitzer, J.P.3
  • 104
    • 76549130930 scopus 로고    scopus 로고
    • Effect of fluid-particle-interactions on dispersing nano-particles in epoxy resins using stirred-media-mills and three-roll-mills
    • Schilde C, Nolte H, Arlt C, Kwade A (2010) Effect of fluid-particle-interactions on dispersing nano-particles in epoxy resins using stirred-media-mills and three-roll-mills. Composite Sci Technol 70(4):657-663. doi:10.1016/j.compscitech.2009.12.021
    • (2010) Composite Sci Technol , vol.70 , Issue.4 , pp. 657-663
    • Schilde, C.1    Nolte, H.2    Arlt, C.3    Kwade, A.4
  • 105
    • 33644819470 scopus 로고    scopus 로고
    • Evaluation of the potential of air jet milling of solid protein-poly(Acrylate) complexes for microparticle preparation
    • Schlocker W, Gschließer S, Bernkop-Schnürch A (2006) Evaluation of the potential of air jet milling of solid protein-poly(acrylate) complexes for microparticle preparation. Eur J Pharm Biopharm 62(3):260-266. doi:10.1016/j.ejpb.2005.09.001
    • (2006) Eur J Pharm Biopharm , vol.62 , Issue.3 , pp. 260-266
    • Schlocker, W.1    Gschließer, S.2    Bernkop-Schnürch, A.3
  • 108
    • 69549107526 scopus 로고    scopus 로고
    • Effect of wet milling process on the solid state of indomethacin and simvastatin
    • Sharma P, Denny W, Garg S (2009) Effect of wet milling process on the solid state of indomethacin and simvastatin. Int J Pharm 380(1-2):40-48. doi:10.1016/j.ijpharm.2009.06.029
    • (2009) Int J Pharm , vol.380 , Issue.1-2 , pp. 40-48
    • Sharma, P.1    Denny, W.2    Garg, S.3
  • 109
    • 77956882799 scopus 로고    scopus 로고
    • Nanocrystals: Industrially feasible multifunctional formulation technology for poorly soluble actives
    • Shegokar R, Müller RH (2010) Nanocrystals: industrially feasible multifunctional formulation technology for poorly soluble actives. Int J Pharm 399(1-2):129-139. doi:10.1016/j.ijpharm.2010.07.044
    • (2010) Int J Pharm , vol.399 , Issue.1-2 , pp. 129-139
    • Shegokar, R.1    Müller, R.H.2
  • 111
    • 33750804217 scopus 로고    scopus 로고
    • Particle engineering techniques for inhaled biopharmaceuticals
    • Shoyele S, Cawthorne S (2006) Particle engineering techniques for inhaled biopharmaceuticals. Adv Drug Deliv Rev 58(9-10):1009-1029. doi:10.1016/j.addr.2006.07.010
    • (2006) Adv Drug Deliv Rev , vol.58 , Issue.9-10 , pp. 1009-1029
    • Shoyele, S.1    Cawthorne, S.2
  • 112
    • 0014793002 scopus 로고
    • Inhibition of sulfathiazole crystal growth by polyvinylpyrrolidone
    • Simonelli AP, Mehta SC, Higuchi WI (1970) Inhibition of sulfathiazole crystal growth by polyvinylpyrrolidone. J Pharm Sci 59(5):633-638. doi:10.1002/jps.2600590512
    • (1970) J Pharm Sci , vol.59 , Issue.5 , pp. 633-638
    • Simonelli, A.P.1    Mehta, S.C.2    Higuchi, W.I.3
  • 113
    • 84959571388 scopus 로고    scopus 로고
    • Homogenization and homogenizers
    • Swarbrick J, 3rd edn. Informa Healthcare, New York
    • Singh S, Naini V (2006) Homogenization and homogenizers. In: Swarbrick J (ed) Encyclopedia of pharmaceutical technology, 3rd edn. Informa Healthcare, New York, pp 1996-2003
    • (2006) Encyclopedia of Pharmaceutical Technology , pp. 1996-2003
    • Singh, S.1    Naini, V.2
  • 114
    • 84889095814 scopus 로고    scopus 로고
    • Systematic investigation of the cavi-precipitation process for the production of ibuprofen nanocrystals
    • Sinha B, Müller RH, Möschwitzer JP (2013) Systematic investigation of the cavi-precipitation process for the production of ibuprofen nanocrystals. Int J Pharm 458(2):315-323, http://doi.org/10.1016/j.ijpharm.2013.10.025
    • (2013) Int J Pharm , vol.458 , Issue.2 , pp. 315-323
    • Sinha, B.1    Müller, R.H.2    Möschwitzer, J.P.3
  • 115
    • 0018929116 scopus 로고
    • Fluid energy milling—an investigation of micronizer performance
    • Skelton R, Khayyat A, Temple R (1980) Fluid energy milling—an investigation of micronizer performance. Fine Particles Process 1:113-125
    • (1980) Fine Particles Process , vol.1 , pp. 113-125
    • Skelton, R.1    Khayyat, A.2    Temple, R.3
  • 116
    • 85081145933 scopus 로고    scopus 로고
    • Accessed 9 Dec
    • SkyePharma-Insoluble Drug Delivery Platform. http://www.skyepharma.com/Technology/Oral_Technology/Particle_Engineering_Technologies/Insoluble_Drug_Delivery_Platform/Default.aspx?id= 80. Accessed 9 Dec 2010
    • (2010)
  • 117
    • 85081146662 scopus 로고
    • Jetmilling of heat sensitive materials
    • part II. Comminution, Nurnberg
    • Smit W (1986) Jetmilling of heat sensitive materials, World congr part technol, part II. Comminution, Nurnberg
    • (1986) World Congr Part Technol
    • Smit, W.1
  • 118
    • 0031125743 scopus 로고    scopus 로고
    • Sizing up grinding mills
    • Spencer R, Dalder B (1997) Sizing up grinding mills. Chem Eng 104(4):84-87
    • (1997) Chem Eng , vol.104 , Issue.4 , pp. 84-87
    • Spencer, R.1    Dalder, B.2
  • 120
    • 31144457183 scopus 로고    scopus 로고
    • Effect of milling and sieving on functionality of dry powder inhalation products
    • Steckel H, Markefka P, teWierik H, Kammelar R (2006) Effect of milling and sieving on functionality of dry powder inhalation products. Int J Pharm 309(1-2):51-59. doi:10.1016/j.ijpharm.2005.10.043
    • (2006) Int J Pharm , vol.309 , Issue.1-2 , pp. 51-59
    • Steckel, H.1    Markefka, P.2    Tewierik, H.3    Kammelar, R.4
  • 121
    • 77957304056 scopus 로고    scopus 로고
    • Advanced milling and containment technologies for superfine active pharmaceutical ingredients
    • Stein J, Fuchs T, Mattern C (2010) Advanced milling and containment technologies for superfine active pharmaceutical ingredients. Chem Eng Tech 33(9):1464-1470. doi:10.1002/ceat.200900590
    • (2010) Chem Eng Tech , vol.33 , Issue.9 , pp. 1464-1470
    • Stein, J.1    Fuchs, T.2    Mattern, C.3
  • 122
    • 19344365909 scopus 로고    scopus 로고
    • Nanomilling in stirred media mills
    • Stenger F, Mende S, Schwedes J, Peukert W (2005) Nanomilling in stirred media mills. Chem Eng Sci 60(16):4557-4565. doi:10.1016/j.ces.2005.02.057
    • (2005) Chem Eng Sci , vol.60 , Issue.16 , pp. 4557-4565
    • Stenger, F.1    Mende, S.2    Schwedes, J.3    Peukert, W.4
  • 123
    • 30744459385 scopus 로고    scopus 로고
    • Preventing disaster: Analyzing your plant’s dust explosion risks
    • Stevenson B (2001) Preventing disaster: analyzing your plant’s dust explosion risks. Powder Bulk Eng 15(1):19-27
    • (2001) Powder Bulk Eng , vol.15 , Issue.1 , pp. 19-27
    • Stevenson, B.1
  • 124
    • 84857794399 scopus 로고    scopus 로고
    • Development of a novel ultra cryo-milling technique for a poorly water-soluble drug using dry ice beads and liquid nitrogen
    • Sugimoto S, Niwa T, Nakanishi Y, Danjo K (2012a) Development of a novel ultra cryo-milling technique for a poorly water-soluble drug using dry ice beads and liquid nitrogen. Int J Pharm 426(1-2):162-169, http://doi.org/10.1016/j.ijpharm.2012.01.007
    • (2012) Int J Pharm , vol.426 , Issue.1-2 , pp. 162-169
    • Sugimoto, S.1    Niwa, T.2    Nakanishi, Y.3    Danjo, K.4
  • 125
    • 84857865523 scopus 로고    scopus 로고
    • Novel ultra-cryo milling and co-grinding technique in liquid nitrogen to produce dissolution-enhanced nanoparticles for poorly water-soluble drugs
    • Sugimoto S, Niwa T, Nakanishi Y, Danjo K (2012b) Novel ultra-cryo milling and co-grinding technique in liquid nitrogen to produce dissolution-enhanced nanoparticles for poorly water-soluble drugs. Chem Pharmaceut Bullet 60(3):325-333, http://doi.org/10.1248/cpb.60.325
    • (2012) Chem Pharmaceut Bullet , vol.60 , Issue.3 , pp. 325-333
    • Sugimoto, S.1    Niwa, T.2    Nakanishi, Y.3    Danjo, K.4
  • 126
    • 0242490752 scopus 로고    scopus 로고
    • Effects of slurry concentration and powder filling on the net mill power of a laboratory ball mill
    • Tangsathitkulchai C (2003) Effects of slurry concentration and powder filling on the net mill power of a laboratory ball mill. Powder Tech 137(3):131-138. doi:10.1016/j.powtec.2003.08.048
    • (2003) Powder Tech , vol.137 , Issue.3 , pp. 131-138
    • Tangsathitkulchai, C.1
  • 127
    • 77953609579 scopus 로고    scopus 로고
    • Investigation of the milling-induced thermal behavior of crystalline and amorphous griseofulvin
    • Trasi NS, Boerrigter SXM, Byrn SR (2010) Investigation of the milling-induced thermal behavior of crystalline and amorphous griseofulvin. Pharm Res 27(7):1377-1389. doi:10.1007/s11095-010-0129-3
    • (2010) Pharm Res , vol.27 , Issue.7 , pp. 1377-1389
    • Trasi, N.S.1    Boerrigter, S.2    Byrn, S.R.3
  • 128
    • 84884548897 scopus 로고    scopus 로고
    • Cremophor-free aqueous paclitaxel nanosuspension production and chemical stability
    • Troester F (2004) Cremophor-free aqueous paclitaxel nanosuspension production and chemical stability. Controlled Release Society 31st annual meeting
    • (2004) Controlled Release Society 31St Annual Meeting
    • Troester, F.1
  • 129
    • 53949092998 scopus 로고    scopus 로고
    • Top-down production of drug nanocrystals: Nanosuspension stabilization, miniaturization and transformation into solid products
    • Honolulu Van Eerdenbrugh B, Van den Mooter G, Augustijns P (2008) Top-down production of drug nanocrystals: nanosuspension stabilization, miniaturization and transformation into solid products. Int J Pharm 364(1):64-75. doi:10.1016/j.ijpharm.2008.07.023
    • (2008) Int J Pharm , vol.364 , Issue.1 , pp. 64-75
    • Honolulu Van Eerdenbrugh, B.1    Van Den Mooter, G.2    Augustijns, P.3
  • 130
    • 85081145347 scopus 로고    scopus 로고
    • Accessed 20 Jan 2011
    • VMA-Bead mill DISPERMAT® SL for mill base amounts of 50 mL-50 L (2010) http://www.vma-getzmann.com/english/dispersion_&_milling_systems/for_20_-_1800_litres/bead_mills_&_basket_mills/bead_mill_sl/bead_mill_sl_0_935_1722_2121_2245_2312.html, Accessed 20 Jan 2011
    • (2010)
  • 131
    • 0029058533 scopus 로고
    • Process-induced crystallinity changes in albuterol sulfate and its effect on powder physical stability
    • Ward GH, Schultz RK (1995) Process-induced crystallinity changes in albuterol sulfate and its effect on powder physical stability. Pharm Res 12(5):773-779
    • (1995) Pharm Res , vol.12 , Issue.5 , pp. 773-779
    • Ward, G.H.1    Schultz, R.K.2
  • 133
    • 25644437027 scopus 로고    scopus 로고
    • Synthesis and mechanical behavior of nanostructured materials via cryomilling
    • Witkin D, Lavernia E (2006) Synthesis and mechanical behavior of nanostructured materials via cryomilling. Progr Mater Sci 51(1):1-60. doi:10.1016/j.pmatsci.2005.04.004
    • (2006) Progr Mater Sci , vol.51 , Issue.1 , pp. 1-60
    • Witkin, D.1    Lavernia, E.2
  • 134
    • 1042298067 scopus 로고    scopus 로고
    • Phase transformation considerations during process development and manufacture of solid oral dosage forms
    • Zhang GGZ, Law D, Schmitt EA, Qiu Y (2004) Phase transformation considerations during process development and manufacture of solid oral dosage forms. Adv Drug Deliv Rev 56(3):371-390. doi:10.1016/j.addr.2003.10.009
    • (2004) Adv Drug Deliv Rev , vol.56 , Issue.3 , pp. 371-390
    • Zhang, G.1    Law, D.2    Schmitt, E.A.3    Qiu, Y.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.