Human-robot collaboration in disassembly for sustainable manufacturing

International Journal of Production Research

Volumn 57, Issue 12, 2019, Pages 4027-4044

  Liu, Quan ^a   Liu, Zhihao ^a   Xu, Wenjun ^a   Tang, Quan ^a   Zhou, Zude ^a   Pham, Duc Truong ^b  

^a WUHAN UNIVERSITY OF TECHNOLOGY   (China)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

artificial intelligence; cyber physical production system; human robot collaboration; product disassembly; sustainable manufacturing

Indexed keywords

ARTIFICIAL INTELLIGENCE; CYBER PHYSICAL SYSTEM; DEEP LEARNING; INTELLIGENT ROBOTS; MANUFACTURE; MOTION CONTROL; REINFORCEMENT LEARNING; SUSTAINABLE DEVELOPMENT;

ENVIRONMENTAL AND SOCIAL SUSTAINABILITY; HUMAN-ROBOT COLLABORATION; INCREMENTAL LEARNING; MULTI MODAL PERCEPTIONS; PRODUCT DISASSEMBLY; PRODUCTION SYSTEM; SUSTAINABLE MANUFACTURING; SYSTEMATIC FRAMEWORK;

ROBOT PROGRAMMING;

EID: 85061896550     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2019.1578906     Document Type: Article

References (51)

1. Abdullah, T. A., K., Popplewell, and C. J., Page. 2003. “A Review of the Support Tools for the Process of Assembly Method Selection and Assembly Planning.” International Journal of Production Research 41 (11): 2391–2410. doi: 10.1080/002075431000087265
2. Awad, Roger E., K. G., Engelhardt, and Larry J., Leifer. 1983. “Development of Training Procedures for an Interactive Voice-Controlled Robotic Aid.” Paper presented at the Proceedings of the 6th Annual Conference on Rehabilitation Engineering: The Promise of Technology., San Diego, CA, USA.
3. Bogner, Karin, Ulrich, Pferschy, Roland, Unterberger, and Herwig, Zeiner. 2018. “Optimised Scheduling in Human-Robot Collaboration – A Use Case in the Assembly of Printed Circuit Boards.” International Journal of Production Research 56 (16): 5522–5540. doi:10.1080/00207543.2018.1470695.
4. Cheng, Huiping, Wenjun, Xu, Qingsong, Ai, Quan, Liu, Zude, Zhou, and Pham Duc, Truong. 2017. “Manufacturing Capability Assessment for Human-Robot Collaborative Disassembly based on Multi-Data Fusion.” In 45th SME North American Manufacturing Research Conference, edited by L. Wang, L. Fratini and A. J. Shih, 26–36.
5. Christensen, H., 2016. “A Roadmap for US Robotics from Internet to Robotics, 2016 edn.” Sponsored by National Science Foundation & University of California, San Diego.
6. Djuric, Ana M., R. J., Urbanic, and J. L., Rickli. 2016. “A Framework for Collaborative Robot (CoBot) Integration in Advanced Manufacturing Systems.” SAE International Journal of Materials and Manufacturing 9 (2). doi:10.4271/2016-01-0337.
7. Du, Guanglong, and Ping, Zhang. 2014. “Markerless Human–Robot Interface for Dual Robot Manipulators Using Kinect Sensor.” Robotics and Computer-Integrated Manufacturing 30 (2): 150–159. doi: 10.1016/j.rcim.2013.09.003
8. Edwards, Shaun, and Chris, Lewis. 2012. “ROS-Industrial: Applying the Robot Operating System (ROS) to Industrial Applications.” Paper presented at the IEEE Int. Conference on Robotics and Automation, ECHORD Workshop.
9. Gerbers, Roman, Kathrin, Wegener, Franz, Dietrich, and Klaus, Dröder. 2018. “Safe, Flexible and Productive Human-Robot-Collaboration for Disassembly of Lithium-Ion Batteries.” In Recycling of Lithium-Ion Batteries, 99–126. Cham: Springer.
10. Glaessgen, E. H., and D. S., Stargel. 2012. “The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles.” Paper presented at the 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2012, April 23, 2012 - April 26, 2012, Honolulu, HI, United states.
11. Haapala, Karl R., Fu, Zhao, Jaime, Camelio, John W., Sutherland, Steven J., Skerlos, David A., Dornfeld, I. S., Jawahir, Hong Chao, Zhang, Andres F., Clarens, and Jeremy L., Rickli. 2013. “A Review of Engineering Research in Sustainable Manufacturing.” Journal of Manufacturing Science & Engineering 135 (4): 599–619. doi: 10.1115/1.4024040
12. Han, Bo, Dhanya Menoth, Mohan, Muhammad, Azhar, Kana, Sreekanth, and Domenico, Campolo. 2016. “Human-Robot Collaboration for Tooling Path Guidance.” Paper presented at the IEEE International Conference on Biomedical Robotics and Biomechatronics.
13. Holloway, Karen, Larry, Leifer, and Machiel, Van der Loos. 1985. “Factors in the Design and Development of an Interactive Human-robot Workstation.” Paper presented at the Proceedings of the Eighth Annual Conference on Rehabilitation Technology: Technology - A Bridge to Independence., Memphis, TN, USA.
14. Hu, Jhen-Jia, Chung-Ning, Huang, Hau-Wei, Wang, Po-Huang, Shieh, and Jwu-Sheng, Hu. 2013. Safety-based Human-Robot Collaboration in Cellular Manufacturing: A Case Study of Power Protector Assembly, 2013 International Conference on Advanced Robotics and Intelligent Systems.
15. Jovane, Francesco, Engelbert, Westkämper, and David, Williams. 2008. The ManuFuture Road to High-Adding-Value Competitive Sustainable Manufacturing. Berlin: Springer.
16. Jovane, F., H., Yoshikawa, L., Alting, C. R., Boër, E., Westkamper, D., Williams, M., Tseng, G., Seliger, and A. M., Paci. 2008. “The Incoming Global Technological and Industrial Revolution Towards Competitive Sustainable Manufacturing.” CIRP Annals 57 (2): 641–659. doi: 10.1016/j.cirp.2008.09.010
17. Kato, Ryu, Marina, Fujita, and Tamio, Arai. 2010. Development of Advanced Cellular Manufacturing System with Human-Robot Collaboration-Assessment of Mental Strain on Human Operators Induced by the Assembly Support, 2010 IEEE Ro-Man.
18. Kobayashi, H., 2000. “Special Issue on Human-Robot Interaction.” Robotics and Autonomous Systems 31 (3): 129–130. doi:10.1016/s0921-8890(99)00102-5.
19. Kulkarni, P., 2012. Reinforcement and Systemic Machine Learning for Decision Making. Hoboken, NJ: IEEE PRESS; WILEY.
20. Kusiak, Andrew., 2018. “Smart Manufacturing.” International Journal of Production Research 56 (1–2): 508–517. doi:10.1080/00207543.2017.1351644.
21. Lee, Jay, Behrad, Bagheri, and Hung An, Kao. 2015. “A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems.” Manufacturing Letters 3: 18–23. doi: 10.1016/j.mfglet.2014.12.001
22. Liu, Zhihao, Quan, Liu, Wenjun, Xu, Aiming, Liu, Zude, Zhou, and Duc Truong, Pham. 2017. “Multi-Mode Perception for Human-Robot Collaborative Manufacturing: Framework and Enabling Technologies.” Paper presented at the International Conference on Innovative Design and Manufacturing.
23. Liu, Jiayi, Zude, Zhou, Duc Truong, Pham, Wenjun, Xu, Chunqian, Ji, and Quan, Liu. 2018. “Robotic Disassembly Sequence Planning Using Enhanced Discrete Bees Algorithm in Remanufacturing.” International Journal of Production Research 56 (9): 3134–3151. doi: 10.1080/00207543.2017.1412527
24. Matthias, Bjoern., 2015. “ISO/TS 15066 - Collaborative Robots - Present Status.” Paper presented at the European Robotics Forum.
25. Miranda, Jhonattan, Roberto, Pérez-Rodríguez, Vicente, Borja, Paul K, Wright, and Arturo, Molina. 2017. “Sensing, Smart and Sustainable Product Development (S3 Product) Reference Framework.” International Journal of Production Research 57 (4): 1–22. doi: 10.1080/00207543.2017.1401237
26. Mnih, Volodymyr, Koray, Kavukcuoglu, David, Silver, Andrei A., Rusu, Joel, Veness, Marc G., Bellemare, Alex, Graves, et al. 2015. “Human-level Control Through Deep Reinforcement Learning.” Nature 518 (7540): 529–533. doi: 10.1038/nature14236
27. Monostori, László. 2014. “Cyber-Physical Production Systems: Roots, Expectations and R&D Challenges.” Procedia CIRP 17: 9–13. doi: 10.1016/j.procir.2014.03.115
28. Nikolakis, Nikolaos, Vasilis, Maratos, and Sotiris, Makris. 2019. “A Cyber Physical System (CPS) Approach for Safe Human-Robot Collaboration in a Shared Workplace.” Robotics and Computer-Integrated Manufacturing 56: 233–243. doi:10.1016/j.rcim.2018.10.003.
29. Ore, Fredrik, Bhanoday Reddy, Vemula, Lars, Hanson, and Magnus, Wiktorsson. 2016. “Human–Industrial Robot Collaboration: Application of Simulation Software for Workstation Optimisation.” Procedia CIRP 44: 181–186. doi:10.1016/j.procir.2016.02.002.
30. Rahimi, Mansour, and Waldemar, Karwowski. 1990. “A Research Paradigm in Human-Robot Interaction.” International Journal of Industrial Ergonomics 5 (1): 59–71. doi:10.1016/0169-8141(90)90028-Z.
31. Rahman, S. M. Mizanoor, Behzad, Sadrfaridpour, and Yue, Wang. 2016. Trust-based Optimal Subtask Allocation and Model Predictive Control for Human-robot Collaborative Assembly in Manufacturing, Proceedings of the ASME 8th Annual Dynamic Systems and Control Conference, 2015, Vol 2.
32. Robla-Gómez, S., Victor M, Becerra, Jose R, Llata, Esther, Gonzalez-Sarabia, Carlos, Torre-Ferrero, and Juan, Perez-Oria. 2017. “Working Together: A Review on Safe Human-Robot Collaboration in Industrial Environments.” IEEE Access 5: 26754–26773. doi: 10.1109/ACCESS.2017.2773127
33. “ROS 2.” https://github.com/ros2/ros2/wiki.
34. Sadrfaridpour, Behzad, Hamed, Saeidi, and Yue, Wang. 2016. “An Integrated Framework for Human-Robot Collaborative Assembly in Hybrid Manufacturing Cells.” Paper presented at the IEEE International Conference on Automation Science and Engineering.
35. Sanchez, Luis M, and Rakesh, Nagi. 2001. “A Review of Agile Manufacturing Systems.” International Journal of Production Research 39 (16): 3561–3600. doi: 10.1080/00207540110068790
36. Silver, D., A., Huang, C. J., Maddison, A., Guez, L., Sifre, G., van den Driessche, J., Schrittwieser, et al. 2016. “Mastering the Game of Go with Deep Neural Networks and Tree Search.” Nature 529 (7587): 484–489. doi: 10.1038/nature16961
37. Skarredghost. 2016. “The Difference Between Kinect v2 and v1.” https://skarredghost.com/2016/12/02/the-difference-between-kinect-v2-and-v1/.
38. Tan, Jeffrey Too Chuan, and Tamio, Arai. 2010. “Analytic Evaluation of Human-Robot System for Collaboration in Cellular Manufacturing System.” In 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.
39. Tan, Jeffrey Too Chuan, Feng, Duan, Ryu, Kato, and Tamio, Arai. 2012. “Safety Strategy for Human-Robot Collaboration: Design and Development in Cellular Manufacturing (vol 24, pg 839, 2012).” Advanced Robotics 26 (10): 1203. doi:10.1080/01691864.2012.704724.
40. Tang, Quan, Wenjun, Xu, Zude, Zhou, and Duc Truong, Pham. 2017. “Sequence Planning for Human-Robot Collaborative Disassembly in Remanufacturing.” Paper presented at the International Conference on Innovative Design and Manufacturing.
41. Tao, Yiyun, Kai, Meng, Peihuang, Lou, Xianghui, Peng, and Xiaoming, Qian. 2018. “Joint Decision-Making on Automated Disassembly System Scheme Selection and Recovery Route Assignment Using Multi-Objective Meta-Heuristic Algorithm.” International Journal of Production Research 57 (1): 1–19.
42. Tao, Fei, Meng, Zhang, Jiangfeng, Cheng, and Qinglin, Qi. 2017. “Digital Twin Workshop: A New Paradigm for Future Workshop.” Computer Integrated Manufacturing Systems 23: 1–9.
43. Tsarouchi, Panagiota, Sotiris, Makris, and George, Chryssolouris. 2016. “Human-Robot Interaction Review and Challenges on Task Planning and Programming.” International Journal of Computer Integrated Manufacturing 29 (8): 916–931. doi:10.1080/0951192x.2015.1130251.
44. Waldherr, S., R., Romero, and S., Thrun. 2000. “A Gesture Based Interface for Human-Robot Interaction.” Autonomous Robots 9 (2): 151–173. doi:10.1023/a:1008918401478.
45. Wang, Lihui., 2015. “Collaborative Robot Monitoring and Control for Enhanced Sustainability.” International Journal of Advanced Manufacturing Technology 81 (9–12): 1433–1445. doi: 10.1007/s00170-013-4864-6
46. Wang, Xi Vincent, Zsolt, Kemény, József, Váncza, and Lihui, Wang. 2017. “Human–Robot Collaborative Assembly in Cyber-physical Production: Classification Framework and Implementation.” CIRP Annals - Manufacturing Technology 66 (1): 5–8. doi: 10.1016/j.cirp.2017.04.101
47. Weber, A., 2014. “Human-Robot Collaboration Comes of Age.” Assembly 57.
48. Yang, Sida, Wenjun, Xu, Zhihao, Liu, Zude, Zhou, and Duc Truong, Pham. 2018. “Multi-Source Vision Perception for Human-Robot Collaboration in Manufacturing.” Paper presented at the IEEE 15th International Conference on Networking, Sensing and Control.
49. Zanchettin, Andrea Maria, Nicola Maria, Ceriani, Paolo, Rocco, Hao, Ding, and Bjoern, Matthias. 2016. “Safety in Human-Robot Collaborative Manufacturing Environments: Metrics and Control.” IEEE Transactions on Automation Science and Engineering 13 (2): 882–893. doi:10.1109/tase.2015.2412256.
50. Zanchettin, Andrea Maria, and Paolo, Rocco. 2013. “Path-Consistent Safety in Mixed Human-Robot Collaborative Manufacturing Environments.” In 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, edited by N. Amato, 1131–1136.
51. Zhao, Dong-Bin, Kun, Shao, Yuan-Heng, Zhu, Dong, Li, Ya-Ran, Chen, Hai-Tao, Wang, De-Rong, Liu, Tong, Zhou, and Cheng-Hong, Wang. 2016. “Review of Deep Reinforcement Learning and Discussions on the Development of Computer Go.” Kongzhi Lilun Yu Yingyong/Control Theory and Applications 33 (6): 701–717. doi:10.7641/CTA.2016.60173.