Design for manufacturing and assembly/disassembly: joint design of products and production systems

International Journal of Production Research

Volumn 56, Issue 24, 2018, Pages 7181-7189

  Battaïa, Olga ^a   Dolgui, Alexandre ^b   Heragu, Sunderesh S ^c   Meerkov, Semyon M ^d   Tiwari, Manoj Kumar ^e  

^a UNIVERSITÉ DE TOULOUSE   (France)

^b INSTITUT DE RECHERCHE EN COMMUNICATIONS ET CYBERNÉTIQUE DE NANTES   (France)

^c Oklahoma State University   (United States)

^d UNIVERSITY OF MICHIGAN   (United States)

^e INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

design for additive manufacturing; design for assembly; design for assembly and disassembly; design for manufacturing; disassembly line balancing

Indexed keywords

EID: 85060867303     PISSN: 00207543     EISSN: 1366588X     Source Type: Journal    
DOI: 10.1080/00207543.2018.1549795     Document Type: Editorial

References (65)

1. Agrawal, Tarang, Anuj, Sao, Kiran Jude, Fernandes, Manoj Kumar, Tiwari, and Duck Young, Kim. 2013. “A Hybrid Model of Component Sharing and Platform Modularity for Optimal Product Family Design.” International Journal of Production Research 51 (2): 614–625. doi: 10.1080/00207543.2012.663106
2. Agrawal, S., and M. K., Tiwari. 2008. “A Collaborative Ant Colony Algorithm to Stochastic Mixed-Model U-Shaped Disassembly Line Balancing and Sequencing Problem.” International Journal of Production Research 46 (6): 1405–1429. doi: 10.1080/00207540600943985
3. Altekin, F. Tevhide., 2017. “A Comparison of Piecewise Linear Programming Formulations for Stochastic Disassembly Line Balancing.” International Journal of Production Research 55 (24): 7412–7434. doi: 10.1080/00207543.2017.1351639
4. Battaïa, Olga, and Alexandre, Dolgui. 2013. “A Taxonomy of Line Balancing Problems and their Solution Approaches.” International Journal of Production Economics 142 (2): 259–277. doi: 10.1016/j.ijpe.2012.10.020
5. Bentaha, Mohand Lounes, Olga, Battaïa, and Alexandre, Dolgui. 2015b. “An Exact Solution Approach for Disassembly Line Balancing Problem Under Uncertainty of the Task Processing Times.” International Journal of Production Research 53 (6): 1807–1818. doi: 10.1080/00207543.2014.961212
6. Bentaha, M. Lounes, Olga, Battaïa, Alexandre, Dolgui, and S. Jack, Hu. 2014. “Dealing with Uncertainty in Disassembly Line Design.” CIRP Annals-Manufacturing Technology 63 (1): 21–24. doi: 10.1016/j.cirp.2014.03.004
7. Bentaha, Mohand Lounes, Olga, Battaïa, Alexandre, Dolgui, and S. Jack, Hu. 2015a. “Second Order Conic Approximation for Disassembly Line Design with Joint Probabilistic Constraints.” European Journal of Operational Research 247 (3): 957–967. doi: 10.1016/j.ejor.2015.06.019
8. Bentaha, Mohand Lounes, Alexandre, Dolgui, Olga, Battaïa, Robert J., Riggs, and Jack, Hu. 2018. “Profit-Oriented Partial Disassembly Line Design: Dealing with Hazardous Parts and Task Processing Times Uncertainty.” International Journal of Production Research. doi:10.1080/00207543.2017.1418987.
9. Boothroyd, Geoffrey, and Leo, Alting. 1992. “Design for Assembly and Disassembly.” CIRP Annals-Manufacturing Technology 41 (2): 625–636. doi: 10.1016/S0007-8506(07)63249-1
10. Boothroyd, G., and P., Dewhurst. 1983. “Design for Assembly–Manual Assembly.” Machine Design 55 (28): 140–145.
11. Bratcu, Antoneta Iuliana, and Alexandre, Dolgui. 2009. “Some New Results on the Analysis and Simulation of Bucket Brigades (Self-Balancing Production Lines).” International Journal of Production Research 47 (2): 369–387. doi: 10.1080/00207540802426128
12. Brennan, Louis, Surendra M., Gupta, and Karim N., Taleb. 1994. “Operations Planning Issues in an Assembly/Disassembly Environment.” International Journal of Operations & Production Management 14 (9): 57–67. doi: 10.1108/01443579410066767
13. Chang, Xiaomeng, Rahul, Rai, and Janis, Terpenny. 2010. “Development and Utilization of Ontologies in Design for Manufacturing.” Journal of Mechanical Design 132 (2): 021009. doi: 10.1115/1.4000697
14. Das, Sanchoy K., Vikram, Datla, and Samir, Gami. 2000. “DFQM-An Approach for Improving the Quality of Assembled Products.” International Journal of Production Research 38 (2): 457–477. doi: 10.1080/002075400189527
15. Dean, Burton V., and Roger L., Salstrom. 1990. “Utilization of Design for Manufacturing (DFM) Techniques.” In Engineering Management Conference, 1990. Management Through the Year 2000-Gaining the Competitive Advantage, 1990 IEEE International, 223–232. Santa Clara: IEEE.
16. Derakhshan Asl, Ali, Kuan Yew, Wong, and Manoj Kumar, Tiwari. 2016. “Unequal-area Stochastic Facility Layout Problems: Solutions Using Improved Covariance Matrix Adaptation Evolution Strategy, Particle Swarm Optimisation, and Genetic Algorithm.” International Journal of Production Research 54 (3): 799–823. doi: 10.1080/00207543.2015.1070217
17. Dereli, T., I. H., Filiz, and A., Baykasoglu. 2001. “Optimizing Cutting Parameters in Process Planning of Prismatic Parts by Using Genetic Algorithms.” International Journal of Production Research 39 (15): 3303–3328. doi: 10.1080/00207540110057891
18. Ding, Guofu, Lei, Jiang, Shengfeng, Qin, Shaowei, Zhu, and Shuwen, Ma. 2012. “Computer-integrated Manufacturing System for Tube Bending.” International Journal of Computer Integrated Manufacturing 25 (11): 1059–1068. doi: 10.1080/0951192X.2012.684710
19. Duflou, J. R., Barbara, Willems, and Wim, Dewulf. 2006. “Towards Self-Disassembling Products Design Solutions for Economically Feasible Large-Scale Disassembly.” In Innovation in Life Cycle Engineering and Sustainable Development, 87–110. Dordrecht: Springer.
20. ElMaraghy, Waguih, Hoda, ElMaraghy, Tetsuo, Tomiyama, and Laszlo, Monostori. 2012. “Complexity in Engineering Design and Manufacturing.” CIRP Annals-Manufacturing Technology 61 (2): 793–814. doi: 10.1016/j.cirp.2012.05.001
21. Feng, Yanling, Guo, Li, and Suresh P., Sethi. 2018. “Pull and Push Contracts in a Decentralised Assembly System with Random Component Yields.” International Journal of Production Research. doi:10.1080/00207543.2018.1471237.
22. Fiorentino, Antonio., 2014. “Cost Drivers-Based Method for Machining and Assembly Cost Estimations in Mould Manufacturing.” The International Journal of Advanced Manufacturing Technology 70 (5–8): 1437–1444. doi: 10.1007/s00170-013-5419-6
23. Fitzgerald, Daniel P., Jeffrey W., Herrmann, and Linda C., Schmidt. 2010. “A Conceptual Design Tool for Resolving Conflicts between Product Functionality and Environmental Impact.” Journal of Mechanical Design 132 (9): 091006. doi: 10.1115/1.4002144
24. Gardan, Julien., 2016. “Additive Manufacturing Technologies: State of the Art and Trends.” International Journal of Production Research 54 (10): 3118–3132. doi: 10.1080/00207543.2015.1115909
25. Ghadimi, Pezhman, Amir Hossein, Azadnia, Cathal, Heavey, Alexandre, Dolgui, and Birkan, Can. 2016. “A Review on the Buyer–Supplier Dyad Relationships in Sustainable Procurement Context: Past, Present and Future.” International Journal of Production Research 54 (5): 1443–1462. doi: 10.1080/00207543.2015.1079341
26. Giachetti, Ronald E., 1998. “A Decision Support System for Material and Manufacturing Process Selection.” Journal of Intelligent Manufacturing 9 (3): 265–276. doi: 10.1023/A:1008866732609
27. Goswami, Mohit., 2017. “An Integrative Product Line Redesign Approach for Modular Engineering Products Within a Competitive Market Space: A Multi-Objective Perspective.” International Journal of Production Research. doi:10.1080/00207543.2017.1364443.
28. Gungor, Askiner, and Surendra M., Gupta. 1998. “Disassembly Sequence Planning for Products with Defective Parts in Product Recovery.” Computers & Industrial Engineering 35 (1): 161–164. doi: 10.1016/S0360-8352(98)00047-3
29. Hague, Richard, Saeed, Mansour, and Naguib, Saleh. 2004. “Material and Design Considerations for Rapid Manufacturing.” International Journal of Production Research 42 (22): 4691–4708. doi: 10.1080/00207840410001733940
30. Harivardhini, S., K., Murali Krishna, and Amaresh, Chakrabarti. 2017. “An Integrated Framework for Supporting Decision Making During Early Design Stages on end-of-Life Disassembly.” Journal of Cleaner Production 168: 558–574. doi: 10.1016/j.jclepro.2017.08.102
31. Hezer, Seda, and Yakup, Kara. 2015. “A Network-Based Shortest Route Model for Parallel Disassembly Line Balancing Problem.” International Journal of Production Research 53 (6): 1849–1865. doi: 10.1080/00207543.2014.965348
32. H’mida, F., and F., Vernadat. 2009. “A Constraint Approach (Flexible CSP) for Alternative Cost Estimation of a Mechanical Product.” International Journal of Production Research 47 (2): 305–320. doi: 10.1080/00207540802425872
33. Ho, Jyh-Wen., 2018. “Cost Strategy for Product Planning Under Competition.” International Journal of Production Research. doi:10.1080/00207543.2018.1461273.
34. Ilgin, Mehmet Ali, Hakan, Akçay, and Ceyhun, Araz. 2017. “Disassembly Line Balancing Using Linear Physical Programming.” International Journal of Production Research 55 (20): 6108–6119. doi: 10.1080/00207543.2017.1324225
35. Ivanov, Dmitry, Alexandre, Dolgui, and Boris, Sokolov. 2018. “The Impact of Digital Technology and Industry 4.0 on the Ripple Effect and Supply Chain Risk Analytics.” International Journal of Production Research. doi:10.1080/00207543.2018.1488086.
36. James, Brian D., Andrew B., Spisak, and Whitney G., Colella. 2014. “Design for Manufacturing and Assembly Cost Estimate Methodology for Transportation Fuel Cell Systems.” Journal of Manufacturing Science and Engineering 136 (2): 024503. doi: 10.1115/1.4025624
37. Jiao, Zhiyuan, and Yanfeng, Xing. 2017. “Clamping-sequence Optimisation Based on Heuristic Algorithm for Sheet-Metal Components.” International Journal of Production Research. doi:10.1080/00207543.2017.1410245.
38. Johnson, M. R., and M. H., Wang. 1998. “Economical Evaluation of Disassembly Operations for Recycling, Remanufacturing and Reuse.” International Journal of Production Research 36 (12): 3227–3252. doi: 10.1080/002075498192049
39. Keivanpour, Samira, and Daoud, Ait Kadi. 2017. “Strategic Eco-Design Map of the Complex Products: Toward Visualisation of the Design for Environment.” International Journal of Production Research. doi:10.1080/00207543.2017.1388931.
40. Kerbrat, Olivier, Pascal, Mognol, and Jean-Yves, Hascoët. 2011. “A new DFM Approach to Combine Machining and Additive Manufacturing.” Computers in Industry 62 (7): 684–692. doi: 10.1016/j.compind.2011.04.003
41. Kim, Hyung-Won, Chuljin, Park, and Dong-Ho, Lee. 2018. “Selective Disassembly Sequencing with Random Operation Times in Parallel Disassembly Environment.” International Journal of Production Research 1–15. doi:10.1080/00207543.2018.1432911.
42. Kuo, Tsai C., Hong C., Zhang, and Samuel H., Huang. 2000. “Disassembly Analysis for Electromechanical Products: A Graph-Based Heuristic Approach.” International Journal of Production Research 38 (5): 993–1007. doi: 10.1080/002075400188988
43. Lin, Than, Jae-Woo, Lee, and E. L. J., Bohez. 2012. “New Integrated Model to Estimate the Manufacturing Cost and Production System Performance at the Conceptual Design Stage of Helicopter Blade Assembly.” International Journal of Production Research 50 (24): 7210–7228. doi: 10.1080/00207543.2011.644818
44. Løkkegaard, Martin, Niels Henrik, Mortensen, and Lars, Hvam. 2018. “Using Business Critical Design Rules to Frame New Architecture Introduction in Multi-Architecture Portfolios.” International Journal of Production Research 1–17. doi:10.1080/00207543.2018.1450531.
45. Mesa, Jaime A., Iván, Esparragoza, and Heriberto, Maury. 2017a. “Development of a Metric to Assess the Complexity of Assembly/Disassembly Tasks in Open Architecture Products.” International Journal of Production Research. doi:10.1080/00207543.2017.1398431.
46. Mesa, Jaime A., Danny, Illera, Iván, Esparragoza, Heriberto, Maury, and Humberto, Gómez. 2017b. “Functional Characterisation of Mechanical Joints to Facilitate its Selection During the Design of Open Architecture Products.” International Journal of Production Research. doi:10.1080/00207543.2017.1412530.
47. Mete, Süleyman, Zeynel Abidin, Çil, Eren, Özceylan, Kürşad, Ağpak, and Olga, Battaïa. 2018. “An Optimisation Support for the Design of Hybrid Production Lines Including Assembly and Disassembly Tasks.” International Journal of Production Research. doi:10.1080/00207543.2018.1428774.
48. Mishra, Nishikant, Vikas, Kumar, Niraj, Kumar, Maneesh, Kumar, and Manoj Kumar, Tiwari. 2011. “Addressing Lot Sizing and Warehousing Scheduling Problem in Manufacturing Environment.” Expert Systems with Applications 38 (9): 11751–11762. doi: 10.1016/j.eswa.2011.03.062
49. Modrak, Vladimir, and Zuzana, Soltysova. 2018. “Development of Operational Complexity Measure for Selection of Optimal Layout Design Alternative.” International Journal of Production Research. doi:10.1080/00207543.2018.1456696.
50. Mukherjee, N. P., and B., Ravi. 2005. “An Integrated Framework for Die and Mold Cost Estimation Using Design Features and Tooling Parameters.” The International Journal of Advanced Manufacturing Technology 26 (9–10): 1138–1149. doi: 10.1007/s00170-004-2084-9
51. Özceylan, Eren, Can B., Kalayci, Aşkıner, Güngör, and Surendra M., Gupta. 2018. “Disassembly Line Balancing Problem: A Review of the State of the Art and Future Directions.” International Journal of Production Research. doi:10.1080/00207543.2018.1428775.
52. Rai, Rahul, and Venkat, Allada. 2003. “Modular Product Family Design: Agent-Based Pareto-Optimization and Quality Loss Function-Based Post-Optimal Analysis.” International Journal of Production Research 41 (17): 4075–4098. doi: 10.1080/0020754031000149248
53. Ramana, K. V., and P. V. M., Rao. 2005. “Automated Manufacturability Evaluation System for Sheet Metal Components in Mass Production.” International Journal of Production Research 43 (18): 3889–3913. doi: 10.1080/00207540500066853
54. Ren, Yaping, Daoyuan, Yu, Chaoyong, Zhang, Guangdong, Tian, Leilei, Meng, and Xiaoqiang, Zhou. 2017. “An Improved Gravitational Search Algorithm for Profit-Oriented Partial Disassembly Line Balancing Problem.” International Journal of Production Research 55 (24): 7302–7316. doi: 10.1080/00207543.2017.1341066
55. Salmi, Anas, Pierre, David, Eric, Blanco, Olivier, Briant, and J., Summers. 2018. “A Cost Estimation Model to Support Automation Decision in Assembly Systems Design.” International Journal of Production Research. doi:10.1080/00207543.2018.1486050.
56. Singh, Rupinder, Ravinder, Sharma, and J. Paulo, Davim. 2017. “Mechanical Properties of bio Compatible Functional Prototypes for Joining Applications in Clinical Dentistry.” International Journal of Production Research. doi:10.1080/00207543.2017.1405167.
57. Stoll, Henry W., 1986. “Design for Manufacture: An Overview.” Applied Mechanics Reviews 39 (9): 1356–1364. doi: 10.1115/1.3149526
58. Tiwari, M. K., Niraj, Sinha, Shailendra, Kumar, Rahul, Rai, and S. K., Mukhopadhyay. 2002. “A Petri Net Based Approach to Determine the Disassembly Strategy of a Product.” International Journal of Production Research 40 (5): 1113–1129. doi: 10.1080/00207540110097176
59. Tuli, Prashant, and Ravi, Shankar. 2015. “Collaborative and Lean New Product Development Approach: A Case Study in the Automotive Product Design.” International Journal of Production Research 53 (8): 2457–2471. doi: 10.1080/00207543.2014.974849
60. Wang, Yuanbin, Yuan, Lin, Ray Y., Zhong, and Xun, Xu. 2018. “IoT-Enabled Cloud-Based Additive Manufacturing Platform to Support Rapid Product Development.” International Journal of Production Research. doi:10.1080/00207543.2018.1516905.
61. Xie, S. Q., Y. L., Tu, R. Y. K., Fung, and Z. D., Zhou. 2003. “Rapid one-of-a-kind Product Development via the Internet: A Literature Review of the State-of-the-art and a Proposed Platform.” International Journal of Production Research 41 (18): 4257–4298. doi: 10.1081/0020754031000149266
62. Zengin, Yasemin, and Erhan, Ada. 2010. “Cost Management Through Product Design: Target Costing Approach.” International Journal of Production Research 48 (19): 5593–5611. doi: 10.1080/00207540903130876
63. Zhang, Hong C., Tsai C., Kuo, Huitian, Lu, and Samuel H., Huang. 1997. “Environmentally Conscious Design and Manufacturing: A State-of-the-art Survey.” Journal of Manufacturing Systems 16 (5): 352–371. doi: 10.1016/S0278-6125(97)88465-8
64. Zheng, Feifeng, Junkai, He, Feng, Chu, and Ming, Liu. 2018. “A New Distribution-Free Model for Disassembly Line Balancing Problem with Stochastic Task Processing Times.” International Journal of Production Research. doi:10.1080/00207543.2018.1430909.
65. Zhu, Lixia, Zeqiang, Zhang, and Yi, Wang. 2018. “A Pareto Firefly Algorithm for Multi-Objective Disassembly Line Balancing Problems with Hazard Evaluation.” International Journal of Production Research. doi:10.1080/00207543.2018.1471238.