Design, management and control of demanufacturing and remanufacturing systems

CIRP Annals - Manufacturing Technology

Volumn 66, Issue 2, 2017, Pages 585-609

  Tolio, Tullio ^a,b   Bernard, Alain ^c   Colledani, Marcello ^a,b   Kara, Sami ^d   Seliger, Guenther ^e   Duflou, Joost ^f   Battaia, Olga ^g   Takata, Shozo ^h  

^a POLITECNICO DI MILANO   (Italy)

^b ITIA CNR   (Italy)

^c ECOLE CENTRALE DE NANTES   (France)

^d UNIVERSITY OF NEW SOUTH WALES   (Australia)

^e TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

^f UNIVERSITY OF LEUVEN   (Belgium)

^g UNIVERSITÉ DE TOULOUSE   (France)

^h WASEDA UNIVERSITY   (Japan)

Author keywords

Circular Economy; Sustainable development; System

Indexed keywords

CONSUMER PRODUCTS; ENERGY UTILIZATION; INTERNATIONAL TRADE; KNOWLEDGE BASED SYSTEMS; MANUFACTURE;

CIRCULAR ECONOMY; ENVIRONMENTAL FOOTPRINTS; KNOWLEDGE-BASED METHODS; MANAGEMENT AND CONTROLS; MANUFACTURING PROCESS; REMANUFACTURING SYSTEM; STRATEGIC MANUFACTURING; SYSTEM;

SUSTAINABLE DEVELOPMENT;

EID: 85025077392     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2017.05.001     Document Type: Article

References (311)

1. Adenso-Díaz, B., García-Carbajal, S., Gupta, S.M., A Path-relinking Approach for a Bi-criteria Disassembly Sequencing Problem. Telecommunication Network Engineering 35:12 (2008), 3989–3997.
2. Adenso-Díaz, B., García-Carbajal, S., Lozano, S., An Efficient GRASP Algorithm for Disassembly Sequence Planning. OR Spectrum 29:3 (2007), 535–549.
3. Agrawal, S., Tiwari, M.-K., A Collaborative Ant Colony Algorithm to Stochastic Mixed-model U-shaped Disassembly Line Balancing and Sequencing Problem. International Journal of Production Research 46:6 (2008), 1405–1429.
4. Aksoy, H.-K., Gupta, S.-M., Buffer Allocation Plan for a Remanufacturing Cell. Computers and Industrial Engineering 48 (2005), 657–677.
5. Aksoy, H.-K., Gupta, S.-M., Near Optimal Buffer Allocation in Remanufacturing Systems With N-policy. Computers and Industrial Engineering 59:4 (2010), 496–508.
6. Andrés, C., Lozano, S., Adenso-Díaz, B., Disassembly Sequence Planning in a Disassembly Cell Context. 16th Int. Conf. Flex. Autom. Intell. Manuf. 23:6 (2007), 690–695.
7. Andrew-Munot, M., Ibrahim, R.-N., Remanufacturing Process and Its Challenges. Journal of Mechanical Engineering and Sciences 4 (2013), 488–495.
8. Andrew-Munot, M., Ibrahim, R.-N., Development and Analysis of Mathematical and Simulation Models of Decision-making Tools for Remanufacturing. Production Planning and Control 24:12 (2013), 1081–1100.
9. Altekin, F.-T., Akkan, C., Task-failure-driven Rebalancing of Disassembly Lines. International Journal of Production Research 50:18 (2012), 4955–4976.
10. Amin, S.-H., Baki, F., A Facility Location Model for Global Closed-loop Supply Chain Network Design. Applied Mathematical Modelling 41 (2017), 316–330.
11. Apra — Automotive Part Remanufacturers Association, Remanufacturing Terminology, Remanufacturing Term Guideline. 2012.
12. Arai, T., Kato, R., Fujita, M., Assessment of Operator Stress Induced by Robot Collaboration in Assembly. Annals of the CIRP 59:1 (2010), 5–8.
13. Aras, N., Aksen, D., Locating Collection Centers for Distance- and Incentive Dependent Returns. International Journal of Production Economics 111:2 (2008), 316–333.
14. Ari, V., E-Waste in Transition — From Pollution to Resource — A Review of Technology of Metal Recovery from Electronic Waste. 2016, Intech.
15. Ayvaz, B., Boltürk, E., Kaçtıoğlu, S., A Grey System for the Forecasting of Return Product Quantity in Recycling Network. International Journal of Supply Chain Management 3:3 (2014), 105–112.
16. Aziz, N.-A., Wahab, D.-A., Ramli, R., Azhari, C.-H., Modelling and Optimisation of Upgradability in the Design of Multiple Life Cycle Products: A Critical Review. Journal of Cleaner Production 112:1 (2016), 282–290.
17. Avikal, A., Jain, R., Mishra, P., A Heuristic for U-shaped Disassembly Line Balancing Problems. International Journal of Mechanical Engineering 3:1 (2013), 51–56.
18. Baiguera, F., Colledani, M., A Knowledge-based Method for the Prediction of Valuable Materials in Waste Printed Circuit Boards. Proceeding of Third Symposium on Urban Mining, 2016.
19. Bain P, Manfre G (2006), Method and apparatus for bonding and debonding adhesive interface surfaces, Patent.
20. Barker, S., King, A., Organising Reuse: Managing the Process of Design For Remanufacture (DFR). POMS 18th Annual Conference, Dallas, Texas, U.S.A., 2007.
21. Barwood, M., Li, J., Pringle, T., Rahimifard, S., Utilisation of Reconfigurable Recycling Systems for Improved Material Recovery from E-waste. Procedia CIRP 29 (2015), 746–751.
22. Basdere, B., Seliger, G., Disassembly Factories for Electrical and Electronic Products To Recover Resources in Product and Material Cycles. Environmental Science and Technology 37:23 (2003), 5354–5362.
23. Bentaha, M.-L., Battaïa, O., Dolgui, A., Hu, J., Dealing with Uncertainty in Disassembly Line Design. Annals of the CIRP 63:1 (2014), 21–24.
24. Bentaha, M.-L., Battaïa, O., Dolgui, A., A Sample Average Approximation Method for Disassembly Line Balancing Problem under Uncertainty. Computers & Operations Research 51 (2014), 111–122.
25. Bentaha, M.-L., Battaïa, O., Dolgui, A., Hu, J., Second Order Conic Approximation for Disassembly Line Design with Joint Probabilistic Constraints. European Journal of Operational Research 247:3 (2015), 957–967.
26. Bentaha, M.-L., Battaïa, O., Dolgui, A., An Exact Solution Approach for Disassembly Line Balancing Problem under Uncertainty of the Task Processing Times. International Journal of Production Research 53:6 (2015), 1807–1818.
27. Bilge, P., Badurdeen, F., Seliger, G., Jawahir, I.-S., A Novel Manufacturing Architecture for Sustainable Value Creation. Annals of the CIRP 65:1 (2016), 455–458.
28. Bilgili, E., Capece, M., Quantitative Analysis of Multi-particle Interactions During Particle Breakage: A Discrete Non-linear Population Balance Framework. Powder Technology 213:13 (2011), 162–173.
29. Bley, H., Reinhart, G., Seliger, G., Bernardi, M., Korne, T., Appropriate Human Involvement in Assembly and Disassembly. Annals of the CIRP 53:2 (2004), 487–509.
30. Borrotti, M., Pievatolo, A., Critelli, I., Degiorgi, A., Colledani, M., A Computer-aided Methodology for the Optimization of Electrostatic Separation Processes in Recycling. Applied Stochastic Models in Business and Industry 32:1 (2016), 133–148.
31. Bouzon, M., Rodriguez, C.-M., Queiroz, A., Cell Layout Applications in Product Recovery: A Lean Proposal to Increase Efficiency in in Remanufacturing. China Business Review 11:5 (2012), 467–475.
32. Castro, M., Remmerswaal, J., Brezet, J., Van Schaik, A., Reuter, M., A Simulation Model of the Comminution–liberation of Recycling Streams: Relationships Between Product Design and the Liberation of Materials During Recycling. International Journal of Mineral Processing 75 (2005), 255–281 3.
33. Caterpillar Inc, Core Acceptance Criteria. 2014.
34. Charter, M., Gray, C., Remanufacturing and Product Design. International Journal of Product Development 6:3–4 (2008), 375–392.
35. Chen, C., Wang, Y., Ou, H., He, Y., Tan, Z., A Review on Remanufacture of Dies and Molds. Journal of Cleaner Production 64 (2014), 13–24.
36. Chen, Y.-W., Wang, L.-C., Wang, A., Chen, T.-L., A Particle Swarm Approach for Optimizing a Multi-stage Closed Loop Supply Chain for the Solar Cell Industry. Robotics and CIM 43 (2017), 111–123.
37. Chertow, M.-R., Industrial Symbiosis: Literature and Taxonomy. Annual Review of Environment and Resources 25:1 (2000), 313–337.
38. Chidi Nnorom, I., Osibanjo, O., Overview of Prospects in Adopting Remanufacturing of End-of-life Electronic Products in the Developing Countries. International Journal of Innovation Management and Technology 1:3 (2010), 328–338.
39. Chierici, E., Copani, G., Remanufacturing with Upgrade PSS for New Sustainable Business Models. Procedia CIRP 47 (2016), 531–536.
40. Chiodo, J.-D., Jones, N., Billett, E.-H., Harrison, D.-J., Shape Memory Alloy Actuators for Active Disassembly Using 'smart' Materials of Consumer Electronic Products. Materials & Design 23 (2002), 471–478.
41. Choi, J.-N., Fthenakis, V., Design and Optimization of Photovoltaics Recycling Infrastructure. Environmental Science & Technology 44 (2011), 8678–8683.
42. Clottey, T., Benton, W.-C., Srivastava, R., Forecasting Product Returns for Remanufacturing Operations. Decision Science 43 (2012), 589–614.
43. Coates, G., Rahimifard, S., Modelling of Post-fragmentation Waste Stream Processing Within UK Shredder Facilities. Waste Management 29 (2009), 44–53.
44. Colledani, M., Tolio, T., A Decomposition Method to Support the Configuration/reconfiguration of Production Systems. Annals of the CIRP 54:1 (2005), 441–444.
45. Colledani, M., Tolio, T., Integrated Process and System Modelling for the Design of Material Recycling Systems. Annals of the CIRP 62:1 (2013), 447–452.
46. Colledani, M., Copani, G., Tolio, T., De-manufacturing Systems. Procedia CIRP 17 (2014), 14–19.
47. Colledani, M., Critelli, I., Degiorgi, A., Tasora, A., Multi-body Granular Flow Simulation for the Design and Operation of Mechanical Separation Processes for Recycling. Proceeding of CARE Electronics, 2014 Nov 17–20, Wien, Austria.
48. Colledani, M., Battaya, O., A Decision Support System to Manage the Quality of End-of-life Products in Disassembly Systems. Annals of the CIRP 65:1 (2016), 41–44.
49. Copani, G., Brusaferri, A., Colledani, M., Pedrocchi, N., Sacco, M., Tolio, T., Integrated De-manufacturing Systems as New Approach to End-of-life Management of Mechatronic Devices. 10th CIRP Global Conference on Sustainable Manufacturing, 2012.
50. Cui, H., Anderson, C.G., Literature Review of Hydrometallurgical Recycling of Printed Circuit Boards (PCBs). Journal of Advanced Chemical Engineering 6:1 (2016), 1–11.
51. Cui, J., Mechanical Recycling of Waste Electric and Electronic Equipment: A Review. Journal of Hazardous Materials 99 (2003), 243–263.
52. Denizel, M., Ferguson, M., Souza, G., Multi-period Remanufacturing Planning with Uncertain Quality of Inputs. IEEE Transactions on Engineering Management 57:3 (2010), 394–404.
53. Duflou, J.-R., Willems, B., Dewulf, W., Towards Self-disassembling Products — Design Solutions for Economically Feasible Large-scale Disassembly. Innovation in Life Cycle Engineering and Sustainable Development, 2006, 87–110.
54. Duflou, J.-R., Seliger, G., Kara, S., Umeda, Y., Ometto, A., Willems, B., Efficiency and Feasibility of Product Disassembly: A Case-based Study. Annals of the CIRP 57:2 (2008), 583–600.
55. Duflou, J.-R., Sutherland, J.W., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S., Haushild, M., Kellens, K., Towards Energy and Resource Efficient Manufacturing: A Process and Systems Approach. Annals of the CIRP 61:2 (2012), 587–609.
56. Duflou, J.-R., Tekkaya, A., Haaseb, M., Weloc, T., Vanmeenseld, K., Kellensa, K., Dewulf, W., Paraskevasa, D., Environmental Assessment of Solid State Recycling Routes for Aluminium Alloys: Can Solid State Processes Significantly Reduce the Environmental Impact of Aluminium Recycling?. Annals of the CIRP 64:1 (2015), 37–40.
57. Duta, L., Filip, F.-G., Popescu, C., Evolutionary Programming in Disassembly Decision Making. International Journal of Computers Communications & Control 3 (2008), 282–286.
58. Eguia, I., Lozano, S., Racero, J., Guerrero, F., A Methodological Approach for Designing and Sequencing Product Families in Reconfigurable Disassembly Systems. Journal of Industrial Engineering and Management 4:3 (2011), 418–435.
59. ElMaraghy, H., Schuh, G., ElMaraghy, W., Piller, F., Schonsleben, P., Tseng, M., Bernard, A., Product Variety Management. Annals of the CIRP 62:2 (2013), 629–652.
60. ElMaraghy, W., ElMaraghy, H., Tomiyama, T., Monostori, L., Complexity in Engineering Design and Manufacturing. Annals of the CIRP 2 (2012), 793–814.
61. ElSayed, A., Kongar, E., Gupta, S.M., Sobh, T., A Robotic-driven Disassembly Sequence Generator for End-of-life Electronic Products. Intelligent Robot Systems 68:1 (2012), 43–52.
62. Entezaminia, A., Heydari, M., Rahmani, D.-A., A Multi-objective Model for Multi-product Multi-site Aggregate Production Planning in a Green Supply Chain: Considering Collection and Recycling Centers. Journal of Manufacturing Systems 40:1 (2016), 63–75.
63. Errington, M., Childe, S.-J., A Business Process Model of Inspection on Remanufacturing. Journal of Remanufacturing 3:7 (2013), 1–22.
64. EU FP7 HydroWEEE, Innovative Hydrometallurgical Processes to Recover Metals from WEEE Including Lamps and Batteries, GA 231962.
65. EU FP7 Premanus, Product Remanufacturing Service System, GA 285541.
66. EU FP7 RobustPlaNet, Shock-robust Design of Plants and their Supply Chain Networks, GA 609087.
67. EU H2020 Screen, Synergic Circular Economy across European Regions, GA 730313.
68. European Commission, Better Regulations for Innovation-driven Investment at EU level Directorate-General for Research and Innovation. 2016.
69. European Commission, Closing the Loop — An EU Action Plan for the Circular Economy, Brussels, 2.12.2015 COM 614. 2015.
70. European Remanufacturing Network, Remanufacturing Market Study. 2015.
71. Faccio, M., Persona, A., Sgarbossa, F., Zanin, G., Sustainable SC through the Complete Reprocessing of End-of-life Products by Manufacturers: A Traditional versus Social Responsibility Company Perspective. European Journal of Operational Research 233:2 (2014), 359–373.
72. Ferguson, M., Guide, V.-D. Jr., Koca, E., Van Souza, G.-C., The Value of Quality Grading in Remanufacturing. Production and Operations Management 18 (2009), 300–314.
73. Franke, C., Basdere, B., Ciupek, M., Seliger, G., Remanufacturing of Mobile Phones — Mcapacity Program and Facility Adaptation Planning. Omega 34 (2006), 562–570.
74. Freiberger, S., Albrecht, M., Käufl, J., Reverse Engineering Technologies for Remanufacturing of Automotive Systems Communicating via CAN Bus. Journal of Remanufacturing, 1, 2011, 6.
75. Frosch, R., Gallopoulos, N., Strategies for Manufacturing. Scientific American 261 (1989), 144–152.
76. Galbreth, M.-R., Blackburn, J.-D., Optimal Acquisition and Sorting Policies for Remanufacturing. Production and Operations Management 15 (2006), 384–392.
77. Gamage, J.-R., Windmill, J., What Makes Cleaning a Costly Operation in Remanufacturing?. 11th CIRP Global Conference on Sustainable Manufacturing, 2013.
78. Gao, J., Chen, X., Yilmaz, O., Gindy, N., An Integrated Adaptive Repair Solution for Complex Aerospace Components Through Geometry Reconstruction. International Journal of Advanced Manufacturing Technology 36 (2008), 1170–1179.
79. Gao, W.-J., Xing, B., Computational Intelligence in Remanufacturing. 2013, IGI Publishing, Hershey.
80. Gaoa, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., The Status, Challenges, and Future of Additive Manufacturing in Engineering. Computer-Aided Design 69 (2015), 65–89.
81. Garcia-Hernandez, L., Arauzo-Azofra, A., Salas-Morera, L., Pierreval, H., Corchado, E., Recycling Plants Layout Design by Means of an Interactive Genetic Algorithm. Intelligent Automation and Soft Computing 19:3 (2013), 457–468.
82. Ghisellini, P., Cialani, C., Ulgiati, S., A Review on Circular Economy: The Expected Transition to a Balanced Interplay of Environmental and Economic Systems. Journal of Cleaner Production 114 (2016), 11–32.
83. Go, T.-F., Wahab, D.-A., Rahman, M.N.-A., Ramli, R., Azhari, C.-H., Disassemblability of End-of-life Vehicle: A Critical Review of Evaluation Methods. Journal of Cleaner Production 19 (2011), 1536–1546.
84. Govindan, K., Soleimani, H., A Review of Reverse Logistics and Closed-loop Supply Chains: A Journal of Cleaner Production Focus. Journal of Cleaner Production 142:1 (2017), 371–384.
85. Guidat, T., Barquet, A.-P., Widera, H., Rozenfeld, H., Seliger, G., Guidelines for the Definition of Innovative Industrial Product–Service Systems (PSS) Business Models for Remanufacturing. Procedia CIRP 16 (2014), 193–198.
86. Guidat, T., Seidel, J., Kohl, H., Seliger, G., A Comparison of Best Practices of Public and Private Support Incentives for the Remanufacturing Industry. 24th CIRP Conference in Life Cycle Engineering, March 8th–10th, Kamakura, Japan, 2017.
87. Guidat, T., Uoti, M., Tonteri, H., Määttä, T., A Classification of Remanufacturing Networks in Europe and their Influence on New Entrants. Procedia CIRP 26 (2015), 683–688.
88. Guide, V., Van Wassenhove, L., Managing Product Returns for Remanufacturing. Production and Operations Management 10 (2001), 142–155.
89. Güngör, A., Gupta, S.-M., An Evaluation Methodology for Disassembly Processes. Proc. 21st Int. Conf. Comput. Ind. Eng. 33:1 (1997), 329–332.
90. Güngör, A., Gupta, S.-M., Disassembly Line in Product Recovery. International Journal of Production Research 40:11 (2002), 2569–2589.
91. Gutowski, T., Dahmus, J., Albino, D., Branham, M., Bayesian Material Separation Model with Applications to Recycling. IEEE International Symposium on Electronics and the Environment, 2007, 233–238.
92. Habibi, M.-K., Battaïa, O., Cung ?D, V., Dolgui, A., Collection–Disassembly Problem in Reverse Supply Chain. International Journal of Production Economics 183 (2017), 334–344.
93. Hamano, K., Material Separation and Recycling of Mixed and Shredded Plastics from Used Household Appliances. Gpec2011 — Global Plastics Environ. Conf., 2011.
94. Hanafi, J., Kara, S., Kaebernick, H., Generating Fuzzy Colored Petri Net Forecasting Model to Predict the Return of Products. Proceedings of the IEEE International Symposium on Electronics and the Environment, 2007.
95. Hanafi, J., Kara, S., Kaebernick, H., Analysis of Collection Network Strategy Applications to End-of-life Electronics. Proceedings of the 15th CIRP International Conference in Life Cycle Engineering, 11–13 June, Sydney, Australia, 2008.
96. Hanafi, J., Kara, S., Kaebernick, H., Reverse Logistic Strategies for End of Life Products. International Journal of Logistics Management 19:3 (2008), 367–388.
97. Hartwell, I., Marco, J., Management of Intellectual Property Uncertainty in a Remanufacturing Strategy for Automotive Energy Storage Systems. Journal of Remanufacturing, 6, 2016, 3.
98. Hatcher, G.-D., Ijomah, W.-L., Windmill, J.F.-C., Design for Remanufacture: A Literature Review and Future Research Needs. Journal of Cleaner Production 19 (2011), 2004–2014.
99. Hatcher, G.-D., Ijomah, W.-L., Windmill, J.F.-C., Integrating Design for Remanufacture into the Design Process: The Operational Factors. Journal of Cleaner Production 39 (2013), 200–208.
100. Hauschild, M., Jeswiet, J., Alting, L., From Life Cycle Assessment to Sustainable Production: Status and Perspectives. Annals of the CIRP 54:2 (2005), 1–21.
101. Herrmann, C., Raatz, A., Andrew, S., Schmitt, J., Scenario-Based Development of Disassembly Systems for Automotive Lithium Ion Battery Systems. Advanced Materials Research 907 (2014), 391–401.
102. Hoque, M., Sokhansanj, S., Naimi, L., Bi, X., Lim, J., Womac, A.-R., Review and Analysis of Performance and Productivity of Size Reduction Equipment for Fibrous Materials. Proceeding of 2007 ASABE Annual International Meeting, 2007, 1–18.
103. Hu, J., Ko, J., Weyand, L., ElMaraghy, H.-A., Lien, T.-K., Koren, Y., Shpitalni, M., Assembly System Design and Operations for Product Variety. Annals of the CIRP 60:2 (2011), 715–733.
104. Hubbard, G., Measuring Organizational Performance: Beyond the Triple Bottom Line. Business Strategy and the Environment 3 (2009), 177–191.
105. http://www.ricoh.com/environment/management/concept.html (Accessed January 2017).
106. http://www.ricoh.com/environment/strategy/target.html (Accessed January 2017).
107. Hui, W., Dong, X., Guanghong, D., A Genetic Algorithm for Product Disassembly Sequence Planning. Artificial Neural Networks 71:13–15 (2008), 2720–2726.
108. Huisman, S., Debaveyea, S., Schaubroecka, T., De Meestera, S., Ardente, F., Mathieux, F., Dewulf, J., The Recyclability Benefit Rate of Closed-loop and Open-loop Systems: A Case Study on Plastic Recycling in Flanders. Resource, Conservation and Recycling 101 (2015), 53–60.
109. Ibbotson, S., Kara, S., Kaebernick, H., A Methodology to Analyse the Critical Design Parameters for Reuse. International Journal of Environmentally Conscious Design & Manufacturing, 13(3–4), 2007.
110. Ignatenko, O., van Schaik, A., Reuter, M., Recycling System Flexibility: The Fundamental Solution to Achieve High Energy and Material Recovery Quotas. Journal of Cleaner Production 16 (2008), 432–449.
111. Ilyas, S., Lee, J.-C., Biometallurgical Recovery of Metals from Waste Electrical and Electronic Equipment: A Review. ChemBioEng Reviews, 1(4), 2014.
112. Ilgin, M.-A., Gupta, S.-M., Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of the State of the Art. Journal of Environmental Management 91:3 (2010), 563–591.
113. Ilgin, M.-A., Gupta, S.-M., Performance Improvement Potential of Sensor Embedded Products in Environmental Supply Chains. Resource, Conservation and Reycling 6 (2011), 580–592.
114. Ijomah, W.-L., McMahon, C., Hammond, G., Newman, S., Development of Design for Remanufacturing Guidelines to Support Sustainable Manufacturing. Robotics and Computer Integrated Manufacturing 23 (2007), 712–719.
115. Ijomah, W.-L., McMahon, C., Hammond, G., Newman, S., Development of Robust Design-for Remanufacturing Guidelines to Further the Aims of Sustainable Development. International Journal of Production Research 45:18 (2007), 4513–4536.
116. Ijomah, W.-L., Addressing Decision Making for Remanufacturing Operations and Design-for-remanufacture. International Journal of Sustainable Engineering 2:2 (2009), 91–202.
117. Ijomah, W.-L., A Tool to Improve Training and Operational Effectiveness in Remanufacturing. International Journal of Computer Integrated Manufacturing 21:6 (2008), 676–701.
118. ISO/TS 15066, Robots and Robotic Devices—Safety Requirements for Industrial Robots—Collaborative Operation, ISO TC184/SC2, 2015.
119. Jaehn, F., Sustainable Operations. European Journal of Operational Research 253 (2016), 243–264.
120. Jayal, A.-D., Badurdeen, F., Dillon, O.-W., Jawahir, I.-S., Sustainable Manufacturing: Modeling and Optimization Challenges at the Product, Process and System Levels. CIRP Journal of Manufacturing Science and Technology 2:3 (2010), 144–152.
121. Jawahir, I.-S., Bradley, R., Technological Elements of Circular Economy and the Principles of 6R-Based Closed-loop Material Flow in Sustainable Manufacturing. Procedia CIRP 40 (2016), 103–108.
122. Jeihoonian, M., Kazemi, Z., Gendreau, M., Accelerating Benders Decomposition for Closed-loop Supply Chain Network Design: Case of Used Durable Products with Different Quality Levels. European Journal of Operational Research 251:3 (2016), 830–845.
123. Jiang, Z., Zhang, H., Sutherland, J.-W., Development of Multi-criteria Decision Making Model for Remanufacturing Technology Portfolio Selection. Journal of Cleaner Production 19 (2011), 1939–1945.
124. Jiang, Z., Zhou, T., Zhang, H., Wang, Y., Cao, H., Tian, G., Reliability and Cost Optimization for Remanufacturing Process Planning. Journal of Cleaner Production 135 (2016), 1602–1610.
125. Jin, X., Hu, J., Koren, Y., Optimal Control of Reassembly with Variable Quality Returns in a Product Remanufacturing System. Annals of the CIRP 60:1 (2011), 25–28.
126. Jindal, A., Sangwan, K.-S., Saxena, S., Network Design and Optimization for Multi-product, Multi-time, Multi-echelon Closed-loop Supply Chain under Uncertainty. Procedia CIRP 29 (2016), 656–661.
127. Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G., Roth, N., A Key Issue in Product Life-cycle: Disassembly. Annals of the CIRP 42:2 (1993), 651–658.
128. Jovane, F., Yoshikawa, H., Alting, L., Boër, C.-R., Westkamper, E., Williams, D., Tseng, M., Seliger, G., Paci, A.-M., The Incoming Global Technological and Industrial Revolution towards Competitive Sustainable Manufacturing. Annals of the CIRP 2 (2008), 641–659.
129. Junior, M.-L., Filho, M.-G., Production Planning and Control for Remanufacturing: Literature Review and Analysis. Production Planning and Control 6 (2012), 419–435.
130. Kang, J.-G., Lee, D.-H., Xirouchakis, P., Persson, J.-G., Parallel Disassembly Sequencing with Sequence-Dependent Operation Times. Annals of the CIRP 50:1 (2001), 343–346.
131. Kakafu, J.-M., Mat Saman, M.-Z., Yusof, S., Sharif, S., Zakuan, N., Investment Decision Issues from Remanufacturing System Perspective: Literature Review and Further Research. Procedia CIRP 26 (2015), 589–594.
132. Kalayci, C.-B., Gupta, S.-M., A Tabu Search Algorithm for Balancing a Sequence-dependent Disassembly Line. Production Planning and Control 25:2 (2014), 149–160.
133. Kara, S., Mazhar, I.-M., Kaebernick, H., Lifetime Prediction of Components for Reuse: An Overview. International Journal of Environment and Technology 4:4 (2004), 323–348.
134. Kara, S., Mazhar, M.I., Kaebernick, H., Ahmed, H., Determining the Reuse Potential of Components Based on Life Cycle Data. Annals of the CIRP 54:1 (2005), 1–4.
135. Kara, S., Pornprasitpol, P., Kaebernick, H., A Methodology for Selective Disassembly for End-of-life (EOL) Products. Journal of Assembly Automation 25:2 (2005), 124–134.
136. Kara, S., Pornprasitpol, P., Kaebernick, H., Selective Disassembly Sequencing: A Methodology for the End-of-life Products. Annals of the CIRP 55:1 (2006), 37–40.
137. Kara, S., Rugrungruang, F., Kaebernick, H., Simulation Modelling of Reverse Logistics Networks. International Journal of Production Economics 106 (2007), 61–69.
138. Kara, S., Manmek, S., Kaebernick, H., Ibbotson, I., Assessment of Products for Minimal Manufacturing. Annals of the CIRP 57:1 (2008), 1–4.
139. Kara, S., Assessing Remaining Useful Lifetime. Wiley Encyclopedia of Operations Research and Management Science, 2010, 1–14.
140. Kawaguchi, Y., Synthesis and Properties of Thermoplastic Expandable Microspheres: The Relation Between Crosslinking Density and Expandable Property. Journal of Applied Polymer Science 93:2 (2004), 505–512.
141. Kernbaum, S., Heyer, S., Chiotellis, S., Seliger, G., Process Planning for IT-equipment Remanufacturing. CIRP Journal of Manufacturing Science and Technology 2 (2009), 13–20.
142. Khaliq, A., Rhamdhani, M.-A., Brooks, G., Masood, S., Metal Extraction Processes for Electronic Waste and Existing Industrial Routes: A Review and Australian Perspective. Resources 3 (2014), 152–179.
143. Kim, H.-J., Kernbaum, S., Seliger, G., Emulation-based Control of a Disassembly System for LCD Monitors. International Journal of Advanced Manufacturing Technology 40 (2009), 383–392.
144. Kimura, F., Kato, S., Hata, T., Masuda, T., Product Modularization for Parts Reuse in Inverse Manufacturing. Annals of the CIRP 50:1 (2001), 89–92.
145. Kin, S.-T., Ong, S.-K., Nee, A.-Y., Remanufacturing Process Planning. Procedia CIRP 15 (2014), 189–194.
146. King, A., Burgess, S., The Development of a Remanufacturing Platform Design: A Strategic Response to the Directive on Waste Electrical and Electronic Equipment. Proceedings of the IMechE 219/B (2005), 623–631.
147. King, A., Burgess, S., Ijomah, W.-L., McMahon, C.-A., Reducing Waste: Repair, Recondition, Remanufacture or Recycle?. Sustainable Development 14 (2006), 257–267.
148. Koc, A., Sabuncuoglu, I., Erel, E., Two Exact Formulations for Disassembly Line Balancing Problems with Task Precedence Diagram Construction Using an AND/OR Graph. IIE Transactions 41:10 (2009), 866–881.
149. Köhler, D.C.-F., Merwerth, F., Mechatronic Remanufacturing at Knorr-Bremse Commercial Vehicles Systems (CVS). Weiland, F.-J., (eds.) Remanufacturing of Heavy Duty Vehicle Components – A Hidden Giant, 2014.
150. 2-Savings of Regenerated Parts. Weiland, F.-J., (eds.) European Automotive Remanufacturing–Technical Trends & Market Development, 2012.
151. Kondoh, S., Soma, M., Umeda, Y., Simulation of Closed-loop Manufacturing Systems Focused on Material Balance of Forward and Inverse Flows. International Journal of Environmentally Design & Manufacturing 13:2 (2007), 1–16.
152. Kongar, E., Gupta, S.-M., Genetic Algorithm for Disassembly Process Planning. Proc. SPIE 4569, Env. Conscious Manufacturing II, 2002, 54–62.
153. Kongar, E., Gupta, S.-M., A Multi-criteria Decision Making Approach for Disassembly-to-order Systems. Journal of Electronics Manufacturing 11:2 (2002), 171–183.
154. Kopacek, P., Kopacek, B., Intelligent, Flexible Disassembly. International Journal Advanced Manufacturing Technology 30 (2006), 54–560.
155. Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G., Brussel, H.-V., Reconfigurable Manufacturing Systems. Annals of the CIRP 48:2 (1999), 527–540.
156. Koren, Y., Hu, S.-J., Gu, P., Shpitalni, M., Open-architecture Products. Annals of the CIRP 62:2 (2013), 719–729.
157. Kott N (2003), Fastener system, Patent.
158. Kristianto, Y., Helo, P., Product Architecture Modularity Implications for Operations Economy of Green Supply Chains. Transportation Research Part E: Logistics and Transportation Review 74 (2015), 63–80.
159. Kruger, J., Lien, T.-K., Verl, A., Cooperation of Human and Machines in Assembly Lines. Annals of the CIRP 58:2 (2009), 628–646.
160. Lage, M., Godinho, M., Production Planning and Control for Remanufacturing: Literature Review and Analysis. Production Planning and Control 23 (2012), 419–435.
161. Lambert, A.J.-D., Exact Methods in Optimum Disassembly Sequence Search for Problems Subject to Sequence Dependent Costs. Omega 34 (2006), 538–549.
162. Lambert, A.J.-D., Optimizing Disassembly Processes Subjected to Sequence-dependent Cost. Computers & Operations Research 34 (2007), 536–551.
163. Lambert, F.J.-D., Gupta, S., Methods for optimum and near optimum disassembly sequencing. International Journal Production Research 46 (2008), 2845–2865.
164. Le Digue, J., Gulbrandsen-Dahl, S., Vallet, F., Soderberg, R., Eynard, B., Perry, N., Optimization and Lifecycle Engineering for Design and Manufacture of Recycled Aluminium Parts. Annals of the CIRP 65:1 (2016), 149–152.
165. Levänen, J., Lindemann, S., Frugal Innovations in Circular Economy: Exploring Possibilities and Challenges in Emerging Markets. The International Society for Ecological Economics Conference, 2016.
166. Li, W.-D., Xia, K., Gao, L., Chao, K.-M., Selective Disassembly Planning for Waste Electrical and Electronic Equipment with Case Studies on Liquid Crystal Displays. Robotics and Computer-Integrated Manufacturing 29:4 (2013), 248–260.
167. Li, C.-B., Tang, Y., Li, C.-C., A GERT-based Analytical Method for Remanufacturing Process Routing. Autom. Science and Eng. (CASE), 2011, 462–467.
168. Li, C.-B., Tang, Y., Li, C.-C., Li, L.-L., A Modeling Approach to Analyze Variability of Remanufacturing Process Routing. IEEE Transactions on Automation Science and Engineering 1 (2013), 86–98.
169. Liang, X., Jin, X., Ni, J., Forecasting Product Returns for Remanufacturing Systems. Journal of Remanufacturing, 4(8), 2014.
170. Liu, W., Zhang, B., Zheng Li, M., Li Zhang, Y.H., Study on Remanufacturing Cleaning Technology in Mechanical Equipment Remanufacturing Process. 20th CIRP International Conference on Life Cycle Engineering, Singapore, 2013.
171. Lu, Q., Stuart Williams, J.-A., Posner, M., Bonawitan, W., Qu, X., Model-based Analysis of Capacity and Service Fees for Electronics Recyclers. Journal of Manufacturing Systems 1 (2006), 45–57.
172. Lukka, T.-J., Tossavainen, T., Kujala, J.-V., Raiko, T., ZenRobotics Recycler—Robotic Sorting Using Machine Learning. Sensor Based Sorting, 2014.
173. Lutters, E., Van Houten, F.J.A.-M., Bernard, A., Mermoz, E., Schutte, C.S.-L., Tools and Technics for Product Design. Annals of the CIRP 63:2 (2014), 607–630.
174. Lyle, J.-T., Regenerative Design for Sustainable Development. 1996, Wiley Ed.
175. MacArthur Foundation, Towards the Circular Economy: Economic Business Rationale for an Accelerated Transition. 2013.
176. MacArthur Foundation, Towards the Circular Economy: Opportunities for the Consumer Goods Sector. 2013.
177. MacArthur Foundation, Growth Within: A Circular Economy Vision for a Competitive Europe. 2015.
178. Macko, M., Post-consumer Waste Recycling and Optimal Production — Size Reduction by Grinding as an Important Stage in Recycling. 2016, Intech.
179. Maraspin, F., Bevilacqua, P., Rem, P., Modeling the Throw of Metals and Non-metals in Eddy Current Separation. International Journal of Mineral Processing 73 (2004), 1–11.
180. Marx-Gomez, J., Rautenstrauch, C., Nornberger, A., Kruse, R., Neuro-fuzzy Approach to Forecast Returns of Scrapped Products to Recycling and Remanufacturing. Knowledge-Based Systems 15:1 (2002), 119–128.
181. Marvel, J., Performance Metrics of Speed and Separation Monitoring in Shared Workspaces. IEEE Transactions on Automation Science and Engineering 2 (2013), 405–414.
182. Matsumoto, M., Ikeda, A., Examination of Demand Forecasting by Time Series Analysis for Auto Parts Remanufacturing. Journal of Remanufacturing 5 (2015), 1–20.
183. Matsumoto, M., Komatsu, S., Demand Forecasting for Production Planning in Remanufacturing. International Journal Advanced Manufacturing Technology 79:1 (2015), 161–175.
184. Matsumoto, M., Umeda, Y., Tsuchiya, S., Tang, L., Development of Demand Forecasting Model for Automotive Electric Component Remanufacturing. Electronics Goes Green EGG Conference, Berlin, Germany, 2016.
185. Matsumoto, M., Yang, S., Martinsen, K., Kainuma, Y., Trends and Research Challenges in Remanufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology 3:1 (2016), 129–142.
186. Mazhar, M.-I., Kara, S., Kaebernick, H., Remaining Life Estimation of Used Components in Consumer Products: Life Cycle Data Analysis by Weibull and Artificial Neural Networks. Journal of Operations Management 25:6 (2007), 1184–1193.
187. McDonough, W., Braungart, M., Cradle to Cradle: Remaking the Way We Make Things. 2002, North Point Press, New York.
188. Meier, H., Roy, R., Seliger, G., Industrial Product–Service Systems—IPSS. Annals of the CIRP 59:2 (2010), 607–627.
189. Merdan, M., Lepuschitz, W., Meurer, T., Vincze, M., Towards Ontology-based Automated Disassembly Systems. IECON 2010—36th Annual Conference on IEEE Industrial Electronics Society, 2010, 1392–1397.
190. Michalos, G., Makris, S., Tsarouchi, P., Guasch, T., Kontovrakis, D., Chryssolouris, G., Design Considerations for Safe Human–robot Collaborative Workplaces. Procedia CIRP 37 (2015), 248–253.
191. Mirmajlesi, S.-R., Shafaei, R., An Integrated Approach to Solve a Robust Forward/reverse Supply Chain for Short Lifetime Products. Computers & Industrial Engineering 97 (2016), 222–239.
192. Morgan, S.-D., Gagnon, R.-J., A Systematic Literature Review of Remanufacturing Scheduling. International Journal of Production Research 51:16 (2013), 4853–4879.
193. Monostori, L., Kádár, B., Bauernhsansl, T., Kondoh, S., Kumara, S., Reinhart, G., Sauer, O., Schuh, G., Sihn, W., Ueda, K., Cyber-physical Systems in Manufacturing. Annals of the CIRP 65:2 (2016), 621–641.
194. Nahas, N., Nourelfath, M., Gendreau, M., Selecting Machines and Buffers in Unreliable Assembly/disassembly Manufacturing Networks. International Journal of Production Economics 154 (2014), 113–126.
195. Nan, L., Liu, W., Zhang, K., Laser Remanufacturing Based on the Integration of Reverse Engineering and Laser Cladding. International Journal of Computer Applications in Technology 37:2 (2011), 116–124.
196. Nasr, N., Hughson, C., Varel, E., Bauer, R., State-of-the-art Assessment of Remanufacturing Technology. 1998, Rochester Institute of Technology.
197. Navrotsky, 3D printing at Siemens Power Service. 2014, Siemens.
198. Newman, S., Zhu, A., Dhokia, V., Shokrani, A., Process Planning for Additive and Subtractive Manufacturing Technologies. Annals of the CIRP 64:1 (2015), 467–470.
199. Nick, J., Harrison, D., Hussein, H., Billett, E., Chiodo, J., Towards Self-disassembling Vehicles. Journal of Sustainable Product Design 3 (2003), 59–74.
200. Nishino, N., Wang, S., Tsuji, N., Kageyama, K., Ueda, K., Categorization and Mechanism of Platform-type Product–service Systems in Manufacturing. Annals of the CIRP 61:1 (2012), 391–394.
201. Osterwalder, A., Pigneur, Y., Clark, T., Business Model Generation: A Handbook for Visionaries, Game Changers, and Challengers. 2010, John Wiley & Sons.
202. Östlin, J., Sundin, E., Björkman, M., Business Drivers for Remanufacturing. Proceedings of CIRP Life Cycle Engineering Seminar, 2008, 581–586.
203. Östlin, J., Sundin, E., Björkman, M., Product Life-cycle Implications for Remanufacturing Strategies. Journal of Cleaner Production 17:11 (2009), 999–1009.
204. Özdemir, Ö., Denizel, M.-V., D.-R, Guide Jr., Recovery Decisions of a Producer in a Legislative Disposal Fee Environment. European Journal of Operational Research 216 (2012), 293–300.
205. Papakostas, N., Pintzos, G., Triantafyllou, C., Computer-aided Design Assessment of Products for End of Life Separation and Material Handling. Annals of the CIRP 64:1 (2016), 185–188.
206. Parker, D., An Analysis of the Spectrum of Re-use. 2007, Oakdene Hollins Ltd., for Defra, Aylesbury.
207. Parkinson, H.-J., Thompson, G., Analysis and Taxonomy of Remanufacturing Industry Practice. Proceedings of the Institution of Mechanical Engineers 217 (2003), 243–256.
208. Parkinson, H.-J., Thompson, G., Systematic Approach to the Planning and Execution of Product Remanufacture. Journal of Process Mechanical Engineering 218 (2004), 1–13.
209. Pauli, G., The Blue Economy: 10 Years, 100 Innovations, 100 Million Jobs. 2010, Paradigm Publications, New Mexico.
210. Peeters, J., Van den Bossche, W., Devoldere, T., Vanegas, P., Dewulf, W., Duflou, J., Pressure-sensitive Fasteners for Active Disassembly. The International Journal of Advanced Manufacturing Technology 87:5 (2015), 1519–1529.
211. Peeters, J., Vanegas, P., Dewulf, W., Duflou, J.-R., Economic and Environmental Evaluation of Design for Active Disassembly. Journal of Cleaner Production 140 (2017), 1182–1193.
212. Peeters, J.-R., Vanegas, P., Van den Bossche, W., Devoldere, T., Dewulf, W., Duflou, J., Elastomer-based Fastener Development to Facilitate Rapid Disassembly for Consumer Products. Journal of Cleaner Production 94 (2015), 177–186.
213. Peeters, J., Vanegas, P., Duflou, J.-R., Mizunoc, T., Fukushige, S., Umedac, Y., Effects of Boundary Conditions on the End-of-life Treatment of LCD TVs. Annals of the CIRP 62:1 (2013), 35–38.
214. Pellegrinelli, S., Moro, F.-L., Pedrocchi, N., Molinari Tosatti, L., Tolio, T., A Probabilistic Approach to Workspace Sharing for Human–robot Cooperation in Assembly Tasks. Annals of the CIRP 65:1 (2016), 57–60.
215. Perry, N., Bernard, A., Laroche, F., Pompidou, S., Improving Design for Recycling — Application to Composites. Annals of the CIRP 61:1 (2012), 151–154.
216. Pialot, O., Millet, D., Bisiaux, J., Upgradable PSS: Clarifying a New Concept of Sustainable Consumption/production Based on Upgradablility. Journal of Cleaner Production 141 (2017), 538–550.
217. Pialot, O., Millet, D., Tchertchian, N., How to Explore Scenarios of Multiple Upgrade Cycles for Sustainable Product Innovation: The upgrade Cycle Explorer Tool. Journal of Cleaner Production 22:1 (2012), 19–31.
218. Picón, A., Ghita, O., Bereciartua, A., Echazarra, J., Whelan, P.-F., Iriondo, P.-M., Real-time Hyperspectral Processing for Automatic Nonferrous Material Sorting. Journal of Electronic Imaging, 21(1), 2012.
219. Picón, A., Ghita, O., Whelan, P.-F., Iriondo, P.-M., Fuzzy Spectral and Spatial Feature Integration for Classification of Nonferrous Materials in Hyperspectral Data. IEEE Transactions on Industrial Informatics 5:4 (2009), 483–494.
220. Picone, N., Colledani, M., Copani, G., Diani, M., Tolio, T., Towards Smart E-waste demanufacturing systems exploiting Cyber-physical Systems (CPSs) capabilities. Electronic Goes Green—EGG, Berlin, 2016.
221. Polotski, V., Kenne, J.-P., Gharbi, A., Optimal Production Scheduling for Hybrid Manufacturing–remanufacturing Systems with Setups. Journal of Manufacturing Systems 37:3 (2015), 703–714.
222. Presley, A., Meade, L., Sarkis, J., A Strategic Sustainability Justification Methodology for Organizational Decisions: A Reverse Logistics Illustration. International Journal of Production Research 18:19 (2007), 4595–4620.
223. Priyono, A., Ijomah, W., Bititci, U., Disassembly for Remanufacturing: A Systematic Literature Review, New Model Development and Future Research Needs. Journal of Industrial Engineering and Management 9:4 (2016), 899–932.
224. Pugliesi-Conti J, Girardiere C (1990), Snap-fit device for holding two parts together, Patent.
225. Qu, X., Williams, J.A.-S., An Analytical Model for Reverse Automotive Production Planning and Pricing. European Journal of Operational Research 190 (2008), 756–767.
226. Rahimifard, S., Abu Bakar, M.-S., Williams, D.-J., Recycling Process Planning for the End-of-life Management of Waste from Electrical and Electronic Equipment. Annals of the CIRP 58:1 (2009), 5–8.
227. Realff, M.-J., Ammons, J.-C., Newton, D., Robust Reverse Production System Design for Carpet Recycling. IIE Transactions 36:8 (2004), 767–776.
228. Ren, G.G.-M., Servitization in Manufacturing Companies. Cranfield Product–Service Systems Seminar, 2007, 4–7.
229. Reuter, M.-A., van Schaik, A., Opportunities and Limits of Recycling: A Dynamic-model-based Analysis. MRS Bulletin 37:4 (2012), 339–347.
230. Reuter, M.-A., van Schaik, A., Gediga, J., Simulation-based Design for Resource Efficiency of Metal Production and Recycling Systems, Cases: Copper Production and Recycling, E-waste (LED Lamps), Nickel Pig Iron. International Journal of Life Cycle Assessment 20:5 (2015), 671–693.
231. Ridley, S., Ljomah, W.-L., A Novel Pre-processing Inspection Methodology to Enhance Productivity in Automotive Product Remanufacture: an Industry-based Research of 2196 Engines. Journal of Remanufacturing, 5, 2015, 8.
232. Riggs, R.-J., Battaïa, O., Hu, J., Disassembly Line Balancing under High Variety of End of Life States Using a Joint Precedence Graph Approach. Journal of Manufacturing Systems 37 (2015), 638–648.
233. Rocchetti, L., Vegliò, F., Kopacek, B., Beolchini, F., Environmental Impact Assessment of Hydrometallurgical Processes for Metal Recovery from WEEE Residues Using a Portable Prototype Plant. Environmental Science and Technology 47 (2013), 1581–1588.
234. Rotter, V.-S., Chancerel, P., Ueberschaar, M., Recycling-oriented Product Characterization for Electric and Electronic Equipment as a Tool to Enable Recycling of Critical Metals. Enabling Materials Resource Sustainability, Rewas, 2013, 192–201.
235. Sabanci Ӧzer, H., A Review of the Literature on Process Innovation in Remanufacturing. International Review of Management and Marketing 2:3 (2012), 139–155.
236. Sabbaghi, M., Esmaeilian, B., Mashhadi, A., Behdad, S., Cade, W., An Investigation of Used Electronics Return Flows: A Data-driven Approach to Capture and Predict Consumers Storage and Utilization Behavior. Waste Management 36 (2015), 305–315.
237. Sakai, T., Takata, S., Systematic Categorization of Reuse and Identification of Issues in Reuse Management in the Closed Loop Manufacturing. Procedia CIRP, 2011, 425–430.
238. Sakai, T., Takata, S., Reconfiguration Management of Remanufactured Products for Responding to Varied User Needs. Annals of the CIRP 61 (2012), 21–26.
239. Santochi, M., Dini, G., Failli, F., Computer Aided Disassembly Planning: State of the Art and Perspectives. Annals of the CIRP 51:2 (2002), 507–529.
240. Scharke, H., Comprehensive Information Chain for Automated Disassembly of Obsolete Technical Appliances. 2003, GITO mbH Verlag.
241. Schubert, G., Bernotat, S., Comminution of Non-brittle Materials. International Journal of Mineral Processing 74 (2004), 19–30.
242. Seliger, G., Basdere, B., Keil, T., Rebafka, U., Innovative Processes and Tools for Disassembly. Annals of the CIRP 51:2 (2002), 37–40.
243. Seliger, G., Sustainability in Manufacturing. 2007, Springer, Berlin Ed.
244. Seliger, G., Zettl, M., Modularization as an Enabler for Cycle Economy. Annals of the CIRP 57:1 (2008), 133–136.
245. Shamsudin, S., Lajis, M.-A., Zhong, Z.-W., Solid-state Recycling of Light Metals: A Review. Advances in Mechanical Engineering 8:8 (2016), 1–23.
246. Shimomura, Y., Umeda, Y., Tomiyama, T., A Proposal of Upgradable Design. Proceedings of First International Symposium on Environmentally Conscious Design and Inverse Manufacturing, 1999, 1000–1004.
247. Simic, V., Dimitrijevic, B., Production Planning for Vehicle Recycling Factories in the EU Legislative and Global Business Environments. Resources, Conservation and Recycling 60 (2012), 78–88.
248. Smith, S., Yen, C.-C., Green Product Design Through Product Modularization Using Atomic theory. Robotics and Computer-Integrated Manufacturing 26:6 (2010), 790–798.
249. Sodhi, M.-S., Young, J., Knight, W.-A., Modelling Material Separation Processes in Bulk Recycling. International Journal of Production Research 37 (1999), 2239–2252.
250. Soleimani, H., Govindan, K., Reverse Logistics Network Design and Planning Utilizing Conditional Value at Risk. European Journal of Operational Research 237:2 (2014), 487–497.
251. Stahel, W., Reday, G., Jobs for Tomorrow, the Potential for Substituting Manpower for Energy. 1981, Vantage Press, N.Y.
252. Stark, R., Grosser, H., Muller, P., Product Analysis Automation for Digital MRO Based on Intelligent 3D Data Acquisition. Annals of the CIRP 62:1 (2013), 123–126.
253. Su, B., Heshmati, A., Geng, Y., A Review of the Circular Economy in China: Moving from Rhetoric to Implementation. Journal of Cleaner Production 42 (2013), 215–227.
254. Subramoniam, R., Huisingh, D., Chinnam, R.-B., Remanufacturing for the Automotive Aftermarket-strategic Factors: Literature Review and Future Research Needs. Journal of Cleaner Production 17 (2010), 1163–1174.
255. Subulan, K., Taşan, A.-S., Baykasoğlu, A., A Fuzzy Goal Programming Model to Strategic Planning Problem of a Lead/acid Battery Closed-loop Supply Chain. Journal of Manufacturing Systems 37:1 (2015), 243–264.
256. Sundin, E., Product and Process Design for Successful Remanufacturing, Linköping Studies in Science and Technology, PhD Dissertation. 2004.
257. Sundin, E., Lindahl, M., Rethinking Product Design for Remanufacturing to Facilitate Integrated Product Service Offerings. IEEE International Symposium on Electronics and the Environment, 2008.
258. Sundin, E., Björkman, M., Eklund, M., Eklund, J., Engkvist, I.-L., Improving the Layout of Recycling Centres by Use of Lean Production Principles. Waste Management 31:6 (2011), 1121–1132.
259. Sundin, E., Kristofer, E., Lee, H. Mien, Design for Automatic End-of-life Processes. Assembly Automation 32:4 (2012), 389–398.
260. Takata, S., Sakai, T., Modelling Product Returns Taking Sales Modes into Account. International Journal of Automation Technology 3 (2009), 71–76.
261. Takata, S., Tsubouchib, K., Maximizing Utilization Rate of Office Automation Equipment by Intraoffice Circulation. Annals of the CIRP 58:1 (2009), 33–36.
262. Takata, S., Tsubouchi, K., Yoshijima, S., Exhausting Lifetime by Multitiered Reuse with Forced Circulation in Closed-loop Manufacturing. International Journal of Sustainable Manufacturing 1:4 (2009), 450–462.
263. Takata, S., Maintenance-centered Circular Manufacturing. Procedia CIRP 11 (2013), 23–31.
264. Tchertchian, N., Millet, D., El Korchi, A., Design for Remanufacturing: What Performances Can Be Expected?. International Journal of Environmental Technology and Management 15:1 (2012), 28–49.
265. Teunter, R.-H., Flapper, S., Optimal Core Acquisition and Remanufacturing Policies under Uncertain Core Quality Fractions. European Journal of Operational Research 210:2 (2011), 241–248.
266. Thompson, M.-K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.-I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., Martina, F., Design for Additive Manufacturing: Trends, Opportunities, Considerations, and Constraints. Annals of the CIRP 65:2 (2016), 737–760.
267. Tolio, T., Design of Flexible Manufacturing Systems. 2009, Springer.
268. Tolio, T., Ceglarek, D., Elmaraghy, H.-A., Fischer, A., Hu, J., Laperriere, L., Newman, S.-T., Vancza, J., SPECIES-co-evolution of Products, Processes and Production Systems. Annals of the CIRP 59:2 (2010), 672–693.
269. Torres, F., Automatic PC Disassembly for Component Recovery. The International Journal of Advanced Manufacturing Technology 23:1 (2004), 39–46.
270. Tsang Mang Kin, S., Ong, S.-K., Nee, A.Y.-C., Remanufacturing Process Planning. Procedia CIRP 15 (2014), 189–194.
271. Tuncel, E., Zeid, A., Kamarthi, S., Solving Large-scale Disassembly Line Balancing Problem with Uncertainty Using Reinforcement Learning. Journal of Intelligent Manufacturing 2 (2012), 1–13.
272. Ueda, K., Nishino, N., Nakayama, H., Oda, S.-H., Decision Making and Institutional Design for Product Lifecycle Management. Annals of the CIRP 54:1 (2005), 407–412.
273. Ueda, K., Takenaka, T., Váncza, J., Monostori, L., Value Creation and Decision-making in Sustainable Society. Annals of the CIRP 58:2 (2009), 681–700.
274. Ulrici, A., Serranti, S., Ferrari, C., Cesare, D., Foca, G., Bonifazi, G., Efficient Chemometric Strategies for PET–PLA Discrimination in Recycling Plants Using Hyperspectral Imaging. Chemometrics and Intelligent Laboratory Systems 122 (2013), 31–39.
275. Umeda, Y., Kondoh, S., Sugino, T., Analysis of Reusability using ‘Marginal Reuse Rate’. Annals of the CIRP 55:1 (2006), 41–44.
276. Umeda, Y., Fukushige, S., Tonoike, K., Evaluation of Scenario-based Modularization for Lifecycle Design. Annals of the CIRP 58:1 (2009), 1–4.
277. Umeda, Y., Takata, S., Kimura, F., Tomiyama, T., Sutherland, J.-W., Kara, S., Herrmann, C., Duflou, J.-R., Toward Integrated Product and Process Life Cycle Planning—An Environmental Perspective. Annals of the CIRP 61:2 (2012), 681–702.
278. Umeda, Y., Fukushige, S., Mizuno, T., Matsuyama, Y., Generating Design Alternatives for Increasing Recyclability of Products. Annals of the CIRP 62:1 (2013), 135–138.
279. Umeda, Y., Miyaji, N., Shiraishi, Y., Fukushige, S., Proposal of a Design Method for Semi-destructive Disassembly with Split Lines. Annals of the CIRP 64:1 (2015), 29–33.
280. Urano, K., Takata, S., Module Reconfiguration Management for Circular Factories without Discriminating Between Virgin and Reused Products: Reengineering Manufacturing for Sustainability. Procedia CIRP, 2013, 603–608.
281. UNEP−United Nations Environment Program, International Resource Panel, Metal Recycling: Opportunities, Limits, Infrastructure. 2013.
282. Van den Bossche, W., Peeters, J.-R., Devolder, T., Duflou, J.-R., Dewulf, W., Proof of Concept of an Elastomer Based Fastener Enabling Rapid Disassembly. Procedia CIRP 15 (2014), 234–238.
283. Van Schaik, A., Reuter, M.-A., Dynamic Modeling of E-waste Recycling System Performance Based on Product Design. Minerals Engineering 23:3 (2010), 192–210.
284. Vanegas, P., Peeters, J.-R., Dewulf, W., Cattrysse, D., Duflou, J.-R., Improving Resource Efficiency through Recycling Modelling: A Case Study for LCD TVs. 12th Glob. Conf. Sustain. Manuf.—Emerg. Potentials 26 (2015), 601–606.
285. Vonbungyong, S., Kara, S., Pagnucco, M., Basic Behaviour Control of the Vision-based Cognitive Robotic Disassembly Automation. Journal of Assembly Automation 33:1 (2012), 38–56.
286. Vongbunyong, S., Kara, S., Pagnucco, M., Application of Cognitive Robotics in Disassembly of Products. Annals of the CIRP 62:1 (2013), 31–34.
287. Vongbunyong, S., Kara, S., Pagnucco, M., Basic Behaviour Control of the Vision-based Cognitive Robotic Disassembly Automation. Assembly Automation 33 (2013), 38–56.
288. Vongbunyong, S., Chen, W.-H., Disassembly Automation: Automated Systems with Cognitive Abilities. 2015, Springer Edition.
289. Van Wassenhove, L.-N., Zikopoulos, C., On the Effect of Quality Overestimation in Remanufacturing. International Journal of Production Research 48 (2010), 5263–5280.
290. Wang, L., Wang, X.-V., Gao, L., Vancza, J., A Cloud-based Approach for WEEE Remanufacturing. Annals of the CIRP 63:1 (2014), 409–413.
291. Wang, Y., Liu, J.-H., Chaotic Particle Swarm Optimization for Assembly Sequence Planning. Robotics and Computer-Integrated Manufacturing 26:2 (2010), 212–222.
292. Watson, M., A Review of Literature and Research on Public Attitudes, Perceptions and Behaviour Relating to Remanufactured, Repaired and Reused Products — Report of the Centre for Remanufacturing and Reuse., 2008.
293. Wei, S., Tang, O., Sundin, E., Core (product) Acquisition Management for Remanufacturing: A Review. Journal of Remanufacturing, 5(4), 2015.
294. Weyrich, M., Wang, Y., Architecture Design of a Vision-based Intelligent System for Automated Disassembly of E-waste with a Case Study of Traction Batteries. 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013.
295. Westkämper, E., Assembly and Disassembly Processes in Product Life Cycle Perspectives. Annals of the CIRP 52:2 (2003), 579–588.
296. Westkämper, E., Feldmann, K., Reinhart, G., Seliger, G., Integrated Development of Assembly and Disassembly. Annals of the CIRP 48:2 (1999), 557–565.
297. Widera, H., Seliger, G., Methodology for Exploiting Potentials of Remanufacturing by Reducing Complexity for Original Equipment Manufacturers. Annals of the CIRP 64:1 (2015), 463–466.
298. Wiendahl, H.-P., ElMaraghy, H., Nyhuis, P., Zah, M.F., Wiendahl, H.-H., Duffie, N., Brieke, M., Changeable Manufacturing — Classification, Design and Operation. Annals of the CIRP 56:2 (2007), 783–809.
299. Wiendahl, H., Scholz-Reiter, B., Burkner, S., Scharke, H., Flexible Disassembly Systems Layouts and Modules for Processing Obsolete Products. IMechE, 2001, 723–732.
300. Willems, B., Dewulf, W., Duflou, J.-R., Active Snap-fit Development Using Topology Optimization. International Journal of Production Research 45 (2007), 4163–4187.
301. Willems, B., Dewulf, W., Duflou, J.-R., Pressure-triggered Active Fasteners: Design Results Using Topology Optimization. Proceedings of the 2007 IEEE International Symposium on Electronics & the Environment, 2007, 184–189.
302. Williams, J.A.-S., A Review of Electronics Demanufacturing Processes. Resources, Conservation and Recycling 47 (2006), 195–208.
303. Wolf, M.-I., Colledani, M., Gershwin, S.-B., Gutowski, T.-G., A Network Flow Model for the Performance Evaluation and Design of Material Separation Systems For Recycling. IEEE Transactions on Automation Science and Engineering 10 (2013), 65–75.
304. World Economic Forum, Towards the Circular Economy: Accelerating the Scale-up Across Global Supply Chains. 2014.
305. Wu, H.-Q., Shi, Y., Xia, Q., Zhu, W.-D., Effectiveness of the Policy of Circular Economy in China: A DEA-based Analysis for the Period of 11th five-year plan. Resources, Conservation and Recycling 83 (2014), 163–175.
306. Xu, Z., Pokharel, S., Elomri, A., Mutlu, F., Emission Policies and Their Analysis for the Design of Hybrid and Dedicated Closed-loop Supply Chains. Journal of Cleaner Production 142:4 (2017), 4152–4168.
307. Yeh, W.-C., Simplified Swarm Optimization in Disassembly Sequencing Problems with Learning Effects. Computers & Operations Research 39:9 (2012), 2168–2177.
308. Yi, P., Huang, M., Guo, L., Shi, T., A Retailer Oriented Closed-loop Supply Chain Network Design for End of Life Construction Machinery Remanufacturing. Journal of Cleaner Production 124 (2016), 191–203.
309. Yin, R., Cao, H., Li, H., Sutherland, J.-W., A Process Planning Method for Reduced Carbon Emissions. International Journal of Computer Integrated Manufacturing 27:12 (2014), 1175–1186.
310. Yuksel, H., Design of Automobile Engines for Remanufacture with Quality Function Deployment. International Journal Of Sustainable Engineering 3:3 (2010), 170–180.
311. Zikopoulos, C., Tagaras, G., On the Attractiveness of Sorting before Disassembly in Remanufacturing. IIE Transactions 40 (2008), 313–323.