Performance improvement potential of sensor embedded products in environmental supply chains

Resources, Conservation and Recycling

Volumn 55, Issue 6, 2011, Pages 580-592

  Ilgin, Mehmet Ali ^a   Gupta, Surendra M ^b  

^a DOKUZ EYLUL UNIVERSITY   (Turkey)

^b NORTHEASTERN UNIVERSITY   (United States)

Author keywords

Closed loop supply chain; Disassembly line; Multi kanban system; Orthogonal arrays; Reverse supply chain; Sensor embedded products

Indexed keywords

CLOSED-LOOP SUPPLY CHAIN; DISASSEMBLY LINE; MULTI-KANBAN SYSTEM; ORTHOGONAL ARRAY; REVERSE SUPPLY CHAINS;

DESIGN OF EXPERIMENTS; ENVIRONMENTAL REGULATIONS; LINEAR MATRIX INEQUALITIES; SENSORS; SUPPLY CHAIN MANAGEMENT;

SUPPLY CHAINS;

ENVIRONMENTAL IMPACT; ENVIRONMENTAL ISSUE; ENVIRONMENTAL POLICY; RECYCLING; WASTE DISPOSAL; WASTE MANAGEMENT;

ARTICLE; COMPUTER ANALYSIS; COMPUTER GRAPHICS; COMPUTER MEMORY; COMPUTER PROGRAM; COMPUTER SYSTEM; CONTROLLED STUDY; ECONOMIC EVALUATION; ELECTRONIC SENSOR; ENVIRONMENTAL MANAGEMENT; ENVIRONMENTAL SUPPLY CHAIN; GOVERNMENT REGULATION; PERFORMANCE MEASUREMENT SYSTEM; PRODUCT RECOVERY; QUANTITATIVE ANALYSIS; RECYCLING; SENSOR EMBEDDED PRODUCT; WASTE DISPOSAL;

EID: 79956213143     PISSN: 09213449     EISSN: 18790658     Source Type: Journal    
DOI: 10.1016/j.resconrec.2010.05.001     Document Type: Article

References (74)

1. H.K. Aksoy, and S.M. Gupta Buffer allocation plan for a remanufacturing cell Computers & Industrial Engineering 48 2005 657 677 (Pubitemid 40308654)
2. F.T. Altekin, L. Kandiller, and N.E. Ozdemirel Profit-oriented disassembly-line balancing International Journal of Production Research 46 2008 2675 2693 (Pubitemid 351394247)
3. N. Aras, and D. Aksen Locating collection centers for distance- and incentive-dependent returns International Journal of Production Economics 111 2008 316 333 (Pubitemid 350299181)
4. Y. Barba-Gutiérrez, B. Adenso-Díaz, and S.M. Gupta Lot sizing in reverse MRP for scheduling disassembly International Journal of Production Economics 111 2008 741 751 (Pubitemid 350299165)
5. J.W. Bruce, and L.A. Hathcock Maintenance and monitoring object models for high-availability network appliances IEEE Transactions on Consumer Electronics 50 2004 472 477
6. F.T. Cheng, G.W. Huang, C.H. Chen, and M.H. Hung A generic embedded device for retrieving and transmitting information of various customized applications Proceedings of the 2004 IEEE International Conference on Robotics and Automation 2004 978 983
7. T. Efendigil, S. Önüt, and E. Kongar A holistic approach for selecting a third-party reverse logistics provider in the presence of vagueness Computers & Industrial Engineering 54 2008 269 287 (Pubitemid 350225618)
8. V.D.R. Guide, R.H. Teunter, and L.N. Van Wassenhove Matching demand and supply to maximize profits from remanufacturing Manufacturing & Service Operations Management 5 2003 303 316
9. A. Gungor, and S.M. Gupta A solution approach to the disassembly line balancing problem in the presence of task failures International Journal of Production Research 39 2001 1427 1467 (Pubitemid 35165625)
10. A. Gungor, and S.M. Gupta Disassembly line in product recovery International Journal of Production Research 40 2002 2569 2589 (Pubitemid 34808265)
11. S.M. Gupta, and Y.A.Y. Al-Turki An algorithm to dynamically adjust the number of kanbans in a stochastic processing times and variable demand environment Production Planning & Control 8 1997 133 141 (Pubitemid 127652359)
12. S.M. Gupta, and Y.A.Y. Al-Turki Adapting just-in-time manufacturing systems to preventive maintenance interruptions Production Planning & Control 9 1998 349 359 (Pubitemid 128625492)
13. S.M. Gupta, and Y.A.Y. Al-Turki The effect of sudden material handling system breakdown on the performance of a JIT system International Journal of Production Research 36 1998 1935 1960 (Pubitemid 128553233)
14. S.M. Gupta, Y.A.Y. Al-Turki, and R.F. Perry Flexible kanban system International Journal of Operations & Production Management 19 1999 1065 1093 (Pubitemid 39025997)
15. M.A. Herzog, T. Marwala, and P.S. Heyns Machine and component residual life estimation through the application of neural networks Reliability Engineering & System Safety 94 2009 479 489
16. E. Iakovou, N. Moussiopoulos, A. Xanthopoulos, C. Achillas, N. Michailidis, and M. Chatzipanagioti A methodological framework for end-of-life management of electronic products Resources, Conservation and Recycling 53 2009 329 339
17. M.A. Ilgin, and S.M. Gupta Environmentally conscious manufacturing and product recovery (ECMPRO): A review of the state of the art Journal of Environmental Management 91 2010 563 591
18. G. Kannan, A. Noorul Haq, and M. Devika Analysis of closed loop supply chain using genetic algorithm and particle swarm optimisation International Journal of Production Research 47 2009 1175 1200
19. G. Kannan, S. Pokharel, and P. Sasi Kumar A hybrid approach using ISM and fuzzy TOPSIS for the selection of reverse logistics provider Resources, Conservation and Recycling 54 2009 28 36
20. S. Kara, P. Pornprasitpol, and H. Kaebernick Selective disassembly sequencing: a methodology for the disassembly of end-of-life products CIRP Annals - Manufacturing Technology 55 2006 37 40 (Pubitemid 44578357)
21. B. Karlsson A distributed data processing system for industrial recycling Proceedings of 1997 IEEE Instrumentation and Measurement Technology Conference 1997 197 200
22. B. Karlsson Fuzzy handling of uncertainty in industrial recycling Proceedings of 1998 IEEE Instrumentation and Measurement Technology Conference 1998 832 836
23. K. Kazmierczak, W.P. Neumann, and J. Winkel A case study of serial-flow car disassembly: Ergonomics, productivity and potential system performance Human Factors and Ergonomics in Manufacturing 17 2007 331 351 (Pubitemid 47040204)
24. K. Kazmierczak, S.E. Mathiassen, M. Forsman, and J. Winkel An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly Applied Ergonomics 36 2005 263 273 (Pubitemid 40613014)
25. D.W. Kelton, R.P. Sadowski, and D.A. Sadowski Simulation with arena 4th ed. 2007 McGraw-Hill New York
26. E.A. Kizilkaya, and S.M. Gupta Modeling operational behavior of a disassembly line Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing IV 2004 79 93 (Pubitemid 40494500)
27. E.A. Kizilkaya, and S.M. Gupta Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V 2005 103 110
28. E.A. Kizilkaya, and S.M. Gupta Sudden material handling system breakdown in a disassembly line Proceedings of the 2005 Northeast Decision Sciences Institute Conference 2005
29. E.A. Kizilkaya, and S.M. Gupta Dynamic kanban system for disassembly line applied to an industrial voice recognition client unit Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI 2006 22 29
30. M. Klausner, W.M. Grimm, and C. Hendrickson Reuse of electric motors in consumer products Journal of Industrial Ecology 2 1998 89 102
31. M. Klausner, W.M. Grimm, and A. Horvath Integrating product takeback and technical service Proceedings of the 1999 IEEE International Symposium on Electronics and the Environment 1999 48 53
32. M. Klausner, W.M. Grimm, C. Hendrickson, and A. Horvath Sensor-based data recording of use conditions for product takeback Proceedings of the 1998 IEEE International Symposium on Electronics and the Environment 1998 138 143
33. Y. Kondo, K. Deguchi, Hayashi Y-i, and F. Obata Reversibility and disassembly time of part connection Resources, Conservation and Recycling 38 2003 175 184 (Pubitemid 36547882)
34. A.J.D. Lambert Disassembly sequencing: A survey International Journal of Production Research 41 2003 3721 3759
35. A.J.D. Lambert, and S.M. Gupta Disassembly modeling for assembly, maintenance, reuse, and recycling 2005 CRC Press Boca Raton, FL
36. J. Li, M. González, and Y. Zhu A hybrid simulation optimization method for production planning of dedicated remanufacturing International Journal of Production Economics 117 2009 286 301
37. C. Liu, X.F. Zha, Y. Miao, and J. Lee Internet server controller based intelligent maintenance system for information appliance products International Journal of Knowledge Based Intelligent Engineering Systems 9 2005 137 148 (Pubitemid 41001109)
38. M.I. Mazhar, S. Kara, and H. Kaebernick Reusability assessment of components in consumer products - a statistical and condition monitoring data analysis strategy Proceedings of the 4th Australian LCA Conference 2005
39. M.I. Mazhar, S. Kara, and H. Kaebernick Remaining life estimation of used components in consumer products: Life cycle data analysis by Weibull and artificial neural networks Journal of Operations Management 25 2007 1184 1193 (Pubitemid 47429827)
40. S.M. McGovern, and S.M. Gupta Ant colony optimization for disassembly sequencing with multiple objectives The International Journal of Advanced Manufacturing Technology 30 2006 481 496 (Pubitemid 44370984)
41. S.M. McGovern, and S.M. Gupta Combinatorial optimization analysis of the unary NP-complete disassembly line balancing problem International Journal of Production Research 45 2007 4485 4511 (Pubitemid 47351669)
42. P.R. Moore, J. Pu, C. Xie, M. Simon, and G. Bee Life cycle data acquisition methods and devices Proceedings of the 7th Mechatronics Forum International Conference 2000
43. J. Ni, J. Lee, and D. Djurdjanovic Watchdog: Information technology for proactive product maintenance and its implications to ecological product re-use Proceedings of the Symposium on Ecological Manufacturing 2003 101 110
44. E.M. Petriu, N.D. Georganas, D.C. Petriu, D. Makrakis, and V.Z. Groza Sensor-based information appliances IEEE Instrumentation & Measurement Magazine 3 2000 31 35 (Pubitemid 32076108)
45. M.S. Phadke Quality engineering using robust design 1989 Prentice Hall New Jersey
46. K.K. Pochampally, S. Nukala, and S.M. Gupta Strategic planning models for reverse and closed-loop supply chains 2009 CRC Press Boca Raton, Florida
47. M.I.G. Salema, A.P. Barbosa-Povoa, and A.Q. Novais Simultaneous design and planning of supply chains with reverse flows: A generic modelling framework European Journal of Operational Research 203 2010 336 349
48. L. Scheidt, and Z. Shuqiang An approach to achieve reusability of electronic modules Proceedings of the IEEE International Symposium on Electronics and the Environment 1994 331 336
49. G. Seliger, A. Buchholz, and W. Grudzein Multiple usage phases by component adaptation Proceedings of the 9th CIRP International Seminar on Life Cycle Engineering 2002 47 54
50. M. Simon, J. Pu, and P.R. Moore The whitebox-capturing and using product life cycle data Proceedings of the 5th CIRP Seminar on Life Cycle Design 1998 161 170
51. M. Simon, G. Bee, P. Moore, P. Jun-Sheng, and X. Changwen Life cycle data acquisition unit-design, implementation, economics and environmental benefits Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment 2000 284 289 (Pubitemid 32394065)
52. M. Simon, G. Bee, P. Moore, J.-S. Pu, and C. Xie Modelling of the life cycle of products with data acquisition features Computers in Industry 45 2001 111 122 (Pubitemid 32542228)
53. S.K. Srivastava Green supply-chain management: a state-of-the-art literature review International Journal of Management Reviews 9 2007 53 80
54. K. Takahashi, and N. Nakamura Reacting JIT ordering systems to the unstable changes in demand International Journal of Production Research 37 1999 2293 2313
55. K. Takahashi, and N. Nakamura Reactive logistics in a JIT environment Production Planning & Control 11 2000 20 31 (Pubitemid 35393603)
56. K. Takahashi, and N. Nakamura Decentralized reactive kanban system European Journal of Operational Research 139 2002 262 276 (Pubitemid 34201238)
57. K. Takahashi, K. Morikawa, and N. Nakamura Reactive JIT ordering system for changes in the mean and variance of demand International Journal of Production Economics 92 2004 181 196
58. Y. Tang, and M.C. Zhou A systematic approach to design and operation of disassembly lines IEEE Transactions on Automation Science and Engineering 3 2006 324 329
59. V. Tardif, and L. Maaseidvaag An adaptive approach to controlling kanban systems European Journal of Operational Research 132 2001 411 424 (Pubitemid 32385030)
60. F. Torres, P. Gil, S.T. Puente, J. Pomares, and R. Aracil Automatic PC disassembly for component recovery The International Journal of Advanced Manufacturing Technology 23 2004 39 46
61. C.F. Tsai, and H.C. Wu MASSIHN: a multi-agent architecture for intelligent home network service IEEE Transactions on Consumer Electronics 48 2002 505 514
62. G. Udomsawat, and S.M. Gupta The effect of sudden server breakdown on the performance of a disassembly line Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V 2005 93 102
63. G. Udomsawat, and S.M. Gupta Multi-kanban mechanism for appliance disassembly Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing V 2005 30 41
64. G. Udomsawat, and S.M. Gupta Multi-kanban in disassembly line with component-discriminating demand Proceedings of the 2005 Northeast Decision Sciences Institute Conference 2005
65. G. Udomsawat, and S.M. Gupta Controlling disassembly line with multi-kanban system Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing VI 2006 42 53
66. G. Udomsawat, and S.M. Gupta Multikanban system for disassembly line S.M. Gupta, A.J.D. Lambert, Environment conscious manufacturing 2008 CRC Press Boca Raton, FL 311 330
67. G. Udomsawat, S.M. Gupta, and S.V. Kamarthi A multi-kanban model for disassembly Proceedings of the 2003 Northeast Decision Sciences Institute Conference 2003 169 171
68. G. Udomsawat, S.M. Gupta, and Y.A.Y. Al-Turki Multi-kanban model for disassembly line with demand fluctuation Proceedings of the SPIE International Conference on Environmentally Conscious Manufacturing III 2003 85 93
69. S. Vadde, S.V. Kamarthi, and S.M. Gupta Optimal pricing of reusable and recyclable components under alternative product acquisition mechanisms International Journal of Production Research 45 2007 4621 4652 (Pubitemid 47351675)
70. S. Vadde, S. Kamarthi, S.M. Gupta, and I. Zeid Product life cycle monitoring via embedded sensors S.M. Gupta, A.J.D. Lambert, Environment conscious manufacturing 2008 CRC Press Boca Raton, FL 91 103
71. J. Wallaschek, S. Wedman, and W. Wickord Lifetime observer: an application of mechatronics in vehicle technology International Journal of Vehicle Design 28 2002 121 130 (Pubitemid 34109025)
72. P. Weber Towards easy-to-communicate and transparent LCA data: application of life cycle design structure matrix Proceedings of the 7th CIRP International Seminar on Life Cycle Engineering 2000 52 59
73. B. Yalabik, N.C. Petruzzi, and D. Chhajed An integrated product returns model with logistics and marketing coordination European Journal of Operational Research 161 2005 162 182
74. X. Yang, P. Moore, J.-S. Pu, and C.-B. Wong A practical methodology for realizing product service systems for consumer products Computers & Industrial Engineering 56 2009 224 235