Biodegradable film from mango kernel starch: Effect of plasticizers on physical, barrier, and mechanical properties

Starch/Staerke

Volumn 68, Issue 9-10, 2016, Pages 919-928

  Nawab, Anjum ^a   Alam, Feroz ^a   Haq, Muhammad Abdul ^a   Hasnain, Abid ^a  

^a UNIVERSITY OF KARACHI   (Pakistan)

Author keywords

Biodegradable film; Mango kernel starch; Solubility; Sorption isotherm; Water vapor permeability

Indexed keywords

ALCOHOLS; FILM PREPARATION; FRUITS; GLYCEROL; MECHANICAL PROPERTIES; PLASTICIZERS; REINFORCED PLASTICS; SCANNING ELECTRON MICROSCOPY; SOLUBILITY; SOLVENTS; STARCH; TENSILE STRENGTH; WATER VAPOR;

BIODEGRADABLE FILM; EFFECT OF PLASTICIZERS; EQUILIBRIUM MOISTURE CONTENTS; FILM-FORMING MATERIALS; FILMOGENIC SOLUTIONS; SCANNING ELECTRON MICROGRAPHS; SORPTION ISOTHERMS; WATER VAPOR PERMEABILITY;

BIODEGRADABLE POLYMERS;

EID: 84992306818     PISSN: 00389056     EISSN: 1521379X     Source Type: Journal    
DOI: 10.1002/star.201500349     Document Type: Article

References (56)

1. Ashwar, B. A., Shah, A., Gani, A., Shah, U., et al., Rice starch active packaging films loaded with antioxidants—development and characterization. Starch/Stärke 2015, 67, 294–302.
2. Ghasemlou, M., Khodaiyan, F., Oromiehie, A., Physical, mechanical, barrier, and thermal properties of polyol-plasticized biodegradable edible film made from kefiran. Carbohydr. Polym. 2011, 84, 477–483.
3. Samper-Madrigal, M., Fenollar, O., Dominici, F., Balart, R., Kenny, J., The effect of sepiolite on the compatibilization of polyethylene-thermoplastic starch blends for environmentally friendly films. J. Mater. Sci. 2015, 50, 863–872.
4. Myllärinen, P., Partanen, R., Seppälä, J., Forssell, P., Effect of glycerol on behaviour of amylose and amylopectin films. Carbohydr. Polym. 2002, 50, 355–361.
5. Sanyang, M. L., Sapuan, S. M., Jawaid, M., Ishak, M. R., Sahari, J., Effect of plasticizer type and concentration on tensile, thermal and barrier properties of biodegradable films based on sugar palm (Arenga pinnata) starch. Polymer 2015, 7, 1106–1124.
6. Moreno, O., Pastor, C., Muller, J., Atarés, L., et al., Physical and bioactive properties of corn starch-buttermilk edible films. J. Food Eng. 2014, 141, 27–36.
7. Dai, L., Qiu, C., Xiong, L., Sun, Q., Characterisation of corn starch-based films reinforced with taro starch nanoparticles. Food Chem. 2015, 174, 82–88.
8. Woggum, T., Sirivongpaisal, P., Wittaya, T., Characteristics and properties of hydroxypropylated rice starch based biodegradable films. Food Hydrocolloids 2015, 50, 54–64.
9. Dias, A. B., Müller, C. M., Larotonda, F. D., Laurindo, J. B., Biodegradable films based on rice starch and rice flour. J. Cereal Sci. 2010, 51, 213–219.
10. da Rosa Zavareze, E., Pinto, V. Z., Klein, B., El Halal, S. L. M., et al., Development of oxidised and heat–moisture treated potato starch film. Food Chem. 2012, 132, 344–350.
11. Fonseca, L. M., Gonçalves, J. R., El Halal, S. L. M., Pinto, V. Z., et al., Oxidation of potato starch with different sodium hypochlorite concentrations and its effect on biodegradable films. LWT-Food Sci. Technol. 2015, 60, 714–720.
12. Villacrés, R. A. E., Flores, S. K., Gerschenson, L. N., Biopolymeric antimicrobial films: Study of the influence of hydroxypropyl methylcellulose, tapioca starch and glycerol contents on physical properties. Mater. Sci. Eng. 2014, 36, 108–117.
13. Maran, J. P., Sivakumar, V., Sridhar, R., Thirugnanasambandham, K., Development of model for barrier and optical properties of tapioca starch based edible films. Carbohydr. Polym. 2013, 92, 1335–1347.
14. Gutiérrez, T. J., Morales, N. J., Pérez, E., Tapia, M. S., Famá, L., Physico-chemical properties of edible films derived from native and phosphated cush-cush yam and cassava starches. Food Packag. Shelf Life 2015, 3, 1–8.
15. Li, M., Li, D., Wang, L.-j., Adhikari, B., Creep behavior of starch-based nanocomposite films with cellulose nanofibrils. Carbohydr. Polym. 2015, 117, 957–963.
16. Pérez-Pacheco, E., Moo-Huchin, V., Estrada-León, R., Ortiz-Fernández, A., et al., Isolation and characterization of starch obtained from Brosimum alicastrum Swarts Seeds. Carbohydr. Polym. 2014, 101, 920–927.
17. Pakistan Bureau of Statistics, Government of Pakistan, Statistics Division, Agriculture Statistics of Pakistan 2010-11. Accessed on February 14, 2016 http://www.pbs.gov.pk/content/agriculture-statistics-Pakistan-2010-11
18. Sindh Board of Investment, Government of Sindh, Pre-Feasibility Studies. Accessed on February 14, 2016 http://www.sbi.gos.pk/pre-feasibility-studies.php
19. Garg, N., Tandon, D., Amylase activity of aspergillus oryzae grown on mango kernel after certain pretreatments and aeration. Indian Food Packer 1997, 51, 26–29.
20. Kaur, M., Singh, N., Sandhu, K. S., Guraya, H. S., Physicochemical, morphological, thermal and rheological properties of starches separated from kernels of some Indian mango cultivars (Mangifera indica L.). Food Chem. 2004, 85, 131–140.
21. Velan, M., Krishnan, M., Lakshmanan, C., Conversion of mango kernel starch to glucose syrups by enzymatic hydrolysis. Bioprocess Eng. 1995, 12, 323–326.
22. Sandhu, K. S., Lim, S.-T., Structural characteristics and in vitro digestibility of mango kernel starches (Mangifera indica L.). Food Chem. 2008, 107, 92–97.
23. Chowdary, G., Krishna, S. H., Rao, G. H., Optimization of enzymatic hydrolysis of mango kernel starch by response surface methodology. Bioprocess. Eng. 2000, 23, 681–685.
24. AOAC, Official Methods of Analysis of AOAC International, Association of Official Analytical Chemists, MD, USA 2000.
25. McGrance, S. J., Cornell, H. J., Rix, C. J., A simple and rapid colorimetric method for the determination of amyloseinstarch products. Starch/Stärke 1998, 50, 158–163.
26. Jangchud, A., Chinnan, M. S., Peanut protein film as affected by drying temperature and pH of film forming solution. J. Food Sci. 1999, 64, 153–157.
27. Bizot, H., in: Jowitt, R., Escher, F., Hallstrom, B., Meffert, H. F., Spiess, W. E. L., Vos, G. (Eds.), Physical Properties of Foods, Applied Science, London, UK 1983, pp. 43–45.
28. ASTM, Standard methods for water vapor transmission of material. In Annual Book of ASTM Standards. American Society for Testing and Materials, Philadelphia, PA, USA 1996.
29. Ayranci, E., Tunc, S., A method for the measurement of the oxygen permeability and the development of edible films to reduce the rate of oxidative reactions in fresh foods. Food Chem. 2003, 80, 423–431.
30. ASTM D-882: Standard test methods for tensile properties of thin plastic sheeting. In Annual Book of ASTM Standards. American Society for Testing and Materials, Philadelphia, PA, USA 1996.
31. Laohakunjit, N., Noomhorm, A., Effect of plasticizers on mechanical and barrier properties of rice starch film. Starch/Stärke 2004, 56, 348–356.
32. Wong, C. W., Muhammad, S., Dzulkifly, M., Saari, N., Ghazali, H., Enzymatic production of linear long-chain dextrin from sago (Metroxylon sagu) starch. Food Chem. 2007, 100, 774–780.
33. Razavi, S. M. A., Amini, A. M., Zahedi, Y., Characterisation of a new biodegradable edible film based on sage seed gum: Influence of plasticiser type and concentration. Food Hydrocolloids 2015, 43, 290–298.
34. Laohakunjit, N., Noomhorm, A., Effect of plasticizers on mechanical and barrier properties of rice starch film. Starch/Stärke 2004, 56, 348–356.
35. Yang, L., Paulson, A. T., Effects of lipids on mechanical and moisture barrier properties of edible gellan film. Food Res. Int. 2000, 33, 571–578.
36. Mali, S., Grossmann, M. V. E., Garcia, M. A., Martino, M. N., Zaritzky, N. E., Microstructural characterization of yam starch films. Carbohydr. Polym. 2002, 50, 379–386.
37. Tongdeesoontorn, W., Mauer, L. J., Wongruong, S., Sriburi, P., Rachtanapun, P., Effect of carboxymethyl cellulose concentration on physical properties of biodegradable cassava starch-based films. Chem. Cent. J. 2011, 5, 1–8.
38. Bourtoom, T., Plasticizer effect on the properties of biodegradable blend film from rice starch-chitosan. Songklanakarin J. Sci. Technol. 2008, 30, 149.
39. Jouki, M., Khazaei, N., Ghasemlou, M., HadiNezhad, M., Effect of glycerol concentration on edible film production from cress seed carbohydrate gum. Carbohydr. Polym. 2013, 96, 39–46.
40. Godbillot, L., Dole, P., Joly, C., Rogé, B., Mathlouthi, M., Analysis of water binding in starch plasticized films. Food Chem. 2006, 96, 380–386.
41. Mali, S., Sakanaka, L., Yamashita, F., Grossmann, M., Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect. Carbohydr. Polym. 2005, 60, 283–289.
42. Turhan, K. N., Şahbaz, F., Water vapor permeability, tensile properties and solubility of methylcellulose-based edible films. J. Food Eng. 2004, 61, 459–466.
43. Kristo, E., Biliaderis, C. G., Water sorption and thermo-mechanical properties of water/sorbitol-plasticized composite biopolymer films: Caseinate-pullulan bilayers and blends. Food Hydrocolloids 2006, 20, 1057–1071.
44. Solano, A. C. V., de Gante, C. R., Development of biodegradable films based on blue corn flour with potential applications in food packaging. Effects of plasticizers on mechanical, thermal, and microstructural properties of flour films. J. Cereal Sci. 2014, 60, 60–66.
45. Karbowiak, T., Debeaufort, F., Champion, D., Voilley, A., Wetting properties at the surface of iota-carrageenan-based edible films. J. Colloid Interface Sci. 2006, 294, 400–410.
46. Osés, J., Fernández-Pan, I., Mendoza, M., Maté, J. I., Stability of the mechanical properties of edible films based on whey protein isolate during storage at different relative humidity. Food Hydrocolloids 2009, 23, 125–131.
47. 2+ ions: effect of the plasticizer concentration. Carbohydr. Polym. 2009, 77, 736–742.
48. Al-Hassan, A., Norziah, M., Starch-gelatin edible films: Water vapor permeability and mechanical properties as affected by plasticizers. Food Hydrocolloids 2012, 26, 108–117.
49. Gennadios, A., Weller, C. L., Gooding, C. H., Measurement errorsinwater vapor permeability of highly permeable, hydrophilic edible films. J. Food Eng. 1994, 21, 395–409.
50. Alves, V. D., Mali, S., Beléia, A., Grossmann, M. V. E., Effect of glycerol and amylose enrichment on cassava starch film properties. J. Food Eng. 2007, 78, 941–946.
51. Shaw, N., Monahan, F., O'Riordan, E., O'sullivan, M., Effect of soya oil and glycerol on physical properties of composite WPI films. J. Food Eng. 2002, 51, 299–304.
52. Shellhammer, T., Krochta, J., Whey protein emulsion film performance as affected by lipid type and amount. J. Food Sci. 1997, 62, 390–394.
53. Forssell, P., Lahtinen, R., Lahelin, M., Myllärinen, P., Oxygen permeability of amylose and amylopectin films. Carbohydr. Polym. 2002, 47, 125–129.
54. Sothornvit, R., Krochta, J., Plasticizer effect on oxygen permeability of β-lactoglobulin films. J. Agric. Food Chem. 2000, 48, 6298–6302.
55. Debeaufort, F., Voilley, A., in: Embuscado, M., Huber, K. C., (Eds.), Edible Films and Coatings for Food Applications, Springer, New York 2009, pp. 135–168.
56. Yang, L., Paulson, A. T., Mechanical and water vapour barrier properties of edible gellan films. Food Res. Int. 2000, 33, 563–570.