Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with Selective Laser Melting

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 70, Issue , 2017, Pages 17-27

  Bagheri, Zahra S ^a   Melancon, David ^a   Liu, Lu ^a   Johnston, R Burnett ^a   Pasini, Damiano ^a  

^a MCGILL UNIVERSITY   (Canada)

Author keywords

Additive Manufacturing; Compensation strategy; Geometry mismatch; Mechanical properties; Metallic porous biomaterials

Indexed keywords

BIOMATERIALS; COMPUTERIZED TOMOGRAPHY; ERROR COMPENSATION; GEOMETRY; MANUFACTURE; MECHANICAL PROPERTIES; MELTING; STRUTS;

ADDITIVE MANUFACTURING PROCESS; COMPENSATION SCHEME; COMPENSATION STRATEGY; MECHANICAL PERFORMANCE; MICRO ARCHITECTURES; MICROCOMPUTED TOMOGRAPHY; SELECTIVE LASER MELTING; THICKNESS COMPENSATION;

3D PRINTERS;

BIOMATERIAL; TITANIUM; TITANIUM ALLOY (TIAL6V4);

ARTICLE; CELL STRUCTURE; COMPENSATION STRATEGY; EQUIPMENT DESIGN; GEOMETRY; INVESTIGATIVE PROCEDURES; MECHANICS; MICRO-COMPUTED TOMOGRAPHY; NANOFABRICATION; PRIORITY JOURNAL; SELECTIVE LASER MELTING; YOUNG MODULUS; LASER; POROSITY;

BIOCOMPATIBLE MATERIALS; LASERS; POROSITY; TITANIUM; X-RAY MICROTOMOGRAPHY;

EID: 84973512756     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2016.04.041     Document Type: Article

References (48)

1. Arabnejad, S., Pasini, D., Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods. Int. J. Mech. Sci. 77 (2013), 249–262 12//.
2. Arabnejad, S., Burnett Johnston, R., Pura, J.A., Singh, B., Tanzer, M., Pasini, D., High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. Acta Biomater. 30 (2016), 345–356 Jan 15.
3. Arabnejad, S., Johnston, R.B., Pura, J.A., Singh, B., Tanzer, M., Pasini, D., High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. Acta Biomater. 30 (2016), 345–356 Jan.
4. Arabnejad Khanoki, S., Pasini, D., Multiscale design and multiobjective optimization of orthopedic hip implants with functionally graded cellular material. J. Biomech. Eng., 134, 2012, 031004 Mar.
5. Arabnejad Khanoki, S., Pasini, D., Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem. J. Mech. Behav. Biomed. Mater. 22 (2013), 65–83 6//.
6. Arabnejad Khanoki, S., Pasini, D., The fatigue design of a bone preserving hip implant with functionally graded cellular material. J. Med. Devices, 7, 2013 020907–020907.
7. Ashby, M.F., Bréchet, Y.J.M., Designing hybrid materials. Acta Mater. 51 (2003), 5801–5821 11/25/.
8. Banhart, J., Manufacture, characterisation and application of cellular metals and metal foams. Prog. Mater. Sci. 46 (2001), 559–632 //.
9. Dias, M.R., Guedes, J.M., Flanagan, C.L., Hollister, S.J., Fernandes, P.R., Optimization of scaffold design for bone tissue engineering: a computational and experimental study. Med. Eng. Phys. 36 (2014), 448–457 Apr.
10. Eshraghi, S., Das, S., Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering. Acta Biomater. 6 (2010), 2467–2476 7//.
11. Fleck, N.A., Deshpande, V.S., Ashby, M.F., 2010. Micro-architectured materials: past, present and future. In: Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. Vol. 466, pp. 2495–2516, 2010-09-08 00:00:00.
12. Gebhardt, A., Hötter, J.-S., Ziebura, D., Impact of SLM build parameters on the surface quality. RTejournal—Forum Rapid Technol., 5, 2014.
13. Guillemin, E.A., Theory of Linear Physical Systems: Theory of Physical Systems From the Viewpoint of Classical Dynamics, Including Fourier Methods. 1963, Wiley, New York.
14. Heinl, P., Müller, L., Körner, C., Singer, R.F., Müller, F.A., Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater. 4 (2008), 1536–1544 2008/09//.
15. Hollander, D.A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., et al. Structural, mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming. Biomaterials 27 (2006), 955–963 Mar.
16. Hollister, S.J., Murphy, W.L., Scaffold translation: barriers between concept and clinic. Tissue Eng. Part B Rev. 17 (2011), 459–474 Dec.
17. Hutmacher, D.W., Scaffolds in tissue engineering bone and cartilage. Biomaterials 21 (2000), 2529–2543.
18. Innovation R.A., 2015. Ti6Al4V ELI-0406 powder for additive manufacturing, ed.
19. ISO 13314, 2011. Mechanical testing of metals – Ductility testing – Compression test for porous and cellular metals, International Organization for Standardization, Geneva, Switzerland.
20. Jones, A.C., Arns, C.H., Hutmacher, D.W., Milthorpe, B.K., Sheppard, A.P., Knackstedt, M.A., The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth. Biomaterials 30 (2009), 1440–1451 Mar.
21. Khanoki, S.A., Pasini, D., Multiscale design and multiobjective optimization of orthopedic hip implants with functionally graded cellular material. J. Biomech. Eng., 134, 2012, 10 Mar.
22. Khoda, A.K.M.B., Ozbolat, I.T., Koc, B., Engineered tissue scaffolds with variational porous architecture. J. Biomech. Eng., 133, 2010 011001–011001.
23. Lin, C.L., Miller, J.D., Network analysis of filter cake pore structure by high resolution X-ray microtomography. Chem. Eng. J. 77 (2000), 79–86 Apr.
24. Mullen, L., Stamp, R.C., Fox, P., Jones, E., Ngo, C., Sutcliffe, C.J., Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures. J. Biomed. Mater. Res. B Appl. Biomater. 92 (2010), 178–188 Jan.
25. Murr, L.E., Quinones, S.A., Gaytan, S.M., Lopez, M.I., Rodela, A., Martinez, E.Y., et al. Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications. J. Mech. Behav. Biomed. Mater. 2 (2009), 20–32 1//.
26. Murr, L.E., Gaytan, S.M., Medina, F., Lopez, H., Martinez, E., Machado, B.I., et al., 2010. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. Vol. 368, pp. 1999–2032, 2010-04-28 00:00:00.
27. Partee, B., Hollister, S.J., Das, S., Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 Polycaprolactone bone tissue engineering scaffolds. J. Manuf. Sci. Eng. 128 (2005), 531–540.
28. Parthasarathy, J., Starly, B., Raman, S., Christensen, A., Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM). J. Mech. Behav. Biomed. Mater. 3 (2010), 249–259 Apr.
29. Pattanayak, D.K., Fukuda, A., Matsushita, T., Takemoto, M., Fujibayashi, S., Sasaki, K., et al. Bioactive Ti metal analogous to human cancellous bone: fabrication by selective laser melting and chemical treatments. Acta Biomater. 7 (2011), 1398–1406 Mar.
30. Pyka, G., Burakowski, A., Kerckhofs, G., Moesen, M., Van Bael, S., Schrooten, J., et al. Surface modification of Ti6Al4V open porous structures produced by additive manufacturing. Adv. Eng. Mater. 14 (2012), 363–370.
31. Rasband, W.S., Image J. 1997&;2015, U.S. National Institutes of Health, Bethesda, Maryland, USA.
32. Ryan, G., Pandit, A., Apatsidis, D.P., Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials 27 (2006), 2651–2670.
33. Sanz-Herrera, J.A., Kasper, C., Van Griensven, M., Garcia-Aznar, J.M., Ochoa, I., Doblare, M., Mechanical and flow characterization of Sponceram® carriers: evaluation by homogenization theory and experimental validation. J. Biomed. Mater. Res. - Part B Appl. Biomater. 87 (2008), 42–48.
34. Schaedler, T.A., Jacobsen, A.J., Torrents, A., Sorensen, A.E., Lian, J., Greer, J.R., et al. Ultralight metallic microlattices. Science 334 (2011), 962–965 2011-11-18 00:00:00.
35. Simone, A.E., Gibson, L.J., Effects of solid distribution on the stiffness and strength of metallic foams. Acta Mater. 46 (1998), 2139–2150 3/23/.
36. Simone, A.E., Gibson, L.J., The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams. Acta Mater. 46 (1998), 3929–3935 7/1/.
37. Simonelli, M., Tse, Y.Y., Tuck, C., Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V. Mater. Sci. Eng.: A 616 (2014), 1–11 10/20/.
38. Sobral, J.M., Caridade, S.G., Sousa, R.A., Mano, J.F., Reis, R.L., Three-dimensional plotted scaffolds with controlled pore size gradients: effect of scaffold geometry on mechanical performance and cell seeding efficiency. Acta Biomater. 7 (2011), 1009–1018 Mar.
39. Van Bael, S., Kerckhofs, G., Moesen, M., Pyka, G., Schrooten, J., Kruth, J.P., Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures. Mater. Sci. Eng.: A 528 (2011), 7423–7431 9/15/.
40. Van Bael, S., Chai, Y.C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomater. 8 (2012), 2824–2834 Jul.
41. Vrancken, B., Thijs, L., Kruth, J.-P., Van Humbeeck, J., Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties. J. Alloy. Compd. 541 (2012), 177–185 11/15/.
42. Vrancken, B., Thijs, L., Kruth, J.P., Van Humbeeck, J., Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties. J. Alloy. Compd. 541 (2012), 177–185 Nov.
43. Warnke, P.H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., et al. Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering. Tissue Eng. Part C—Methods 15 (2009), 115–124 Jun.
44. Williams, J.M., Adewunmi, A., Schek, R.M., Flanagan, C.L., Krebsbach, P.H., Feinberg, S.E., et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26 (2005), 4817–4827.
45. Wu, S., Liu, X., Yeung, K.W.K., Liu, C., Yang, X., Biomimetic porous scaffolds for bone tissue engineering. Mater. Sci. Eng.: R: Rep. 80 (2014), 1–36 6//.
46. Yan, C., Hao, L., Hussein, A., Raymont, D., Evaluations of cellular lattice structures manufactured using selective laser melting. Int. J. Mach. Tools Manuf. 62 (2012), 32–38 11//.
47. Yan, C., Hao, L., Hussein, A., Young, P., Raymont, D., Advanced lightweight 316 L stainless steel cellular lattice structures fabricated via selective laser melting. Mater. Des. 55 (2014), 533–541 3//.
48. Yang, S., Leong, K.F., Du, Z., Chua, C.K., The design of scaffolds for use in tissue engineering. Part I. Traditional factors. Tissue Eng. 7 (2001), 679–689.