Rapid prototyping: Porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering

Tissue Engineering - Part C: Methods

Volumn 15, Issue 2, 2009, Pages 115-124

  Warnke, Patrick H ^a,b   Douglas, Timothy ^a   Wollny, Patrick ^a   Sherry, Eugene ^b   Steiner, Martin ^c   Galonska, Sebastian ^a   Becker, Stephan T ^a   Springer, Ingo N ^a   Wiltfang, Jörg ^a   Sivananthan, Sureshan ^d  

^a UNIVERSITY HOSPITAL SCHLESWIG HOLSTEIN   (Germany)

^b BOND UNIVERSITY   (Australia)

^c UNIVERSITY OF KIEL   (Germany)

^d EPSOM AND ST HELIER UNIVERSITY HOSPITALS NHS TRUST   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCOMPATIBILITY; BONE; CELL CULTURE; CONCURRENT ENGINEERING; FLUORESCENCE MICROSCOPY; JOB ANALYSIS; LASER PULSES; OSTEOBLASTS; RAPID PROTOTYPING; SCANNING ELECTRON MICROSCOPY; TISSUE ENGINEERING; TITANIUM; TITANIUM ALLOYS;

BONE TISSUE; BONE TISSUE ENGINEERING; COMPRESSIVE FORCES; COMPRESSIVE LOADS; DEOXYURIDINE; EXTERNAL SHAPE; HUMAN OSTEOBLAST; INTERNAL STRUCTURE; MULTIPLE CONTACTS; PORE OCCLUSION; PORE WIDTH; POROUS TITANIUM ALLOYS; SELECTIVE LASER MELTING; SEM; TI-6AL-4V; WATERSOLUBLE; WELL-SPREAD;

SCAFFOLDS;

3 (4,5 DIMETHYL 2 THIAZOLYL) 2,5 DIPHENYLTETRAZOLIUM BROMIDE; BROXURIDINE; LACTATE DEHYDROGENASE; TETRAZOLIUM; TITANIUM;

ARTICLE; BIOCOMPATIBILITY; BONE TISSUE; CELL PROLIFERATION; FLUORESCENCE MICROSCOPY; HUMAN; HUMAN CELL; LASER; OSTEOBLAST; POROSITY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; SELECTIVE LASER MELTING; TISSUE ENGINEERING;

EID: 67649841597     PISSN: 19373384     EISSN: 19373392     Source Type: Journal    
DOI: 10.1089/ten.tec.2008.0288     Document Type: Article

References (43)

1. Hon, K.K.B., and Gill, T.J. Selective laser sintering of SiC=polyamide composites. CIRP Ann. Manufac. Techn. 52,173, 2003.
2. Rochus, P., Plesseria, J.-Y., van Elsen, M., Kruth, J.-P., Carrus, R., and Dormal, T. New applications of rapid prototyping and rapid manufacturing (RP=RM) technologies for space instrumentation. Acta Astronaut. 61, 352, 2007.
3. Berzins, M., Childs, T.H.C., and Ryder, G.R. The selective laser sintering of polycarbonate. CIRP Ann. 45, 187, 1996.
4. Yadroitsev, I., Bertrand, P., Laget, B., and Smurov, I. Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the International Thermonuclear Experimental Reactor components. J. Nucleic Mater. 362,189, 2007.
5. Abe, F., Santos, E.C., Kitamura, Y., Osakada, K., and Shiomi, M. Influence of forming conditions on the titanium model in rapid prototyping with the selective laser melting process. Proc. ImechE. 217C, 119, 2003.
6. Santos, E.C., Osakada, K., Shiomi, M., Kitamura, Y., and Abe, F. Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting. Proc. ImechE. Engers. 218C, 711, 2004.
7. Laoui, T., Santos, E., Osakada, K., Shiomi, M., Morita, M., Tolochko, N.K., Abe, F., and Takahashi, M. Properties of titanium dental implant models made by laser processing. Proc. ImechE. 220C, 857, 2006.
8. Osakada, K., and Shiomi, M. Flexible manufacturing of metallic products by selective laser melting of powder. Int. J. Mach. Tool. Manufac. 46, 1188, 2006.
9. Bertrand, P., Bayle, F., Combe, C., Goeuriot, P., and Smurov, I. Ceramic components manufacturing by selective laser sintering. Appl. Surf. Sci. 254, 989, 2007.
10. Williams, J.M., Adewunmi, A., Schek, R.M., Flanagan, C.L., Krebsbach, P.H., Feinberg, S.E., Hollister, S.J., and Das, S. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26, 4817, 2005.
11. Zou, C., Zhang, E., Li, M., and Zeng, S. Preparation, microstructure and mechanical properties of porous titanium sintered by Ti fibres. J. Mater. Sci. Mater. Med. 19, 1017, 2008.
12. Wen, C.E., Yamada, Y., Shimojima, K., Chino, Y., Asahina, T., and Mabuchi, M. Processing and mechanical properties of autogenous titanium implant materials. J. Mater. Sci. Mater. Med. 13, 397, 2002.
13. Li, J.P., de Wijn, J.R., van Blitterswijk, C.A., and de Groot, K. Cancellous bone from porous Ti6Al4V by multiple coating technique. J. Mater. Sci. Mater. Med. 4, 1159, 2006.
14. Kim, H.M., Kokubo, T., Fujibayashi, S., Nishiguchi, S., and Nakamura, T. Bioactive macroporous titanium surface layer on titanium substrate. J. Biomed. Mater. Res. 52, 553, 2000.
15. Li, J.P., de Wijn, J.R., van Blitterswijk, C.A., and de Groot, K. Porous Ti6Al4V scaffolds directly fabricated by 3D fibre deposition technique: effect of nozzle diameter. J. Mater. Sci. Mater. Med. 4, 1159, 2005.
16. Lopez-Heredia, M.A., Goyenvalle, E., Aguado, E., Pilet, P., Leroux, C., Dorget, M., Weiss, P., and Layrolle, P. Bone growth in rapid prototyped porous titanium implants. J. Biomed. Mater. Res. A. 85, 664, 2008.
17. Wehmö ller, M., Warnke, P.H., Zilian, C., and Eufinger, H. Implant design and production-a new approach by selective laser melting. Int. Congr. Ser. 1281, 690, 2005.
18. Warnke, P.H., Springer, I.N., Wiltfang, J., Acil, Y., Eufinger, H., Wehmö ller, M., Russo, P.A., Bolte, H., Sherry, E., Behrens, E., and Terheyden, H. Growth and transplantation of a custom vascularised bone graft in a man. Lancet 364,766, 2004.
19. Warnke, P.H., Springer, I.N., Acil, Y., Julga, G., Wiltfang, J., Ludwig, K., Russo, P.A., Sherry, E., Sivananthan, S., Hedderich, J., and Terheyden, H. The mechanical integrity of in vivo engineered heterotopic bone. Biomaterials 27, 1081, 2006.
20. Yang, B., Ludwig, K., Adelung, R., and Kern, M. Microtensile bond strength of three luting resins to human regional dentin. Dent. Mater. 22, 45, 2006.
21. Hutmacher, D.W. Scaffolds in tissue engineering bone and cartilage. Biomaterials 21, 2529, 2000.
22. Hollister, S.J., Maddox, R.D., and Taboas, J.M. Optimal design and fabrication of scaffolds to mimic scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23, 4095, 2002.
23. Sun, W., Darling, A., Straly, B., and Nam, J. Computer aided tissue engineering: overview, scope and challenges. J. Biotechnol. Appl. Biochem. 39, 29, 2004.
24. Chu, T.M., Orton, D.G., Hollister, S.J., Feinberg, S.E., and Halloran, J.W. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23, 1283, 2002.
25. Sun, W., Starly, B., Darling, A., and Gomez, C. Computer aided tissue engineering: biomimetic modelling and design of tissue scaffold. J. Biotechnol. Appl. Biochem. 39, 49, 2004.
26. Taboas, J.M., Maddox, R.D., Kresbach, P.H., and Hollister, S.J. Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials 24, 181, 2003.
27. Zeltinger, J., Sherwood, J.K., Graham, D.A., Mueller, R., and Griffith, L.G. Effect of pore size and void fraction on cellular adhesion, proliferation and matrix deposition. Tissue Eng. 7,557, 2001.
28. Nikolovski, J., and Mooney, D. Smooth muscle cell adhesion to tissue engineering scaffolds. Biomaterials 21, 2025, 2000.
29. Pamula, E., Bacakova, L., Filova, E., Buczynska, J., Dobrzynski, P., Noskova, L., and Grausova, L. The influence of pore size on colonization of poly(L-lactide-glycolide) scaffolds with human osteoblast-like MG 63 cells in vitro. J. Mater. Sci. Mater. Med. 19, 425, 2008.
30. Galois, L., and Mainard, D. Bone ingrowth into two porous ceramics with different pore sizes: an experimental study. Acta Orthop. Belg. 70, 598, 2004.
31. Bae, C.J., Kim, H.W., Koh, Y.H., and Kim, H.E. Hydroxyapatite (HA) bone scaffolds with controlled macrochannel pores. J. Mater. Sci. Mater. Med. 17, 517-21, 2006.
32. Le Huec, C., Schaeverbeke, T., Clement, D., Faber, J., and Le Rebeller, A. Influence of porosity on the mechanical resistance of hydroxyapatite ceramics under compression stress. Biomaterials 16, 113, 1995.
33. Magan, A., and Ripamonti, U. Geometry of porous hydroxyapatite implants influences osteogenesis in baboons. J. Craniofac. Surg. 7, 71, 1996.
34. Chang, B.S., Lee, C.K., Hong, K.S., Youn, H.J., Ryu, S.S., Chung, S.S., and Park, K.W. Osteoconduction at porous hydroxyapatite with various pore configurations. Biomaterials 21, 1291, 2000.
35. Hing, K., Best, S., and Bonfield, W. Characterization of porous hydroxyapatite. J. Mater. Sci. Mater. Med. 10, 135, 1999.
36. Karageorgiou, V., and Kaplan, D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26, 5474, 2005.
37. Ryan, G., Pandit, A., and Apatsidis, D.P. Fabrication methods of porous metals for use in orthopaedic applications. Biomaterials 27, 2651, 2006.
38. Ishaug-Riley, S.L., Okun, L.E., Prado, G., Applegate, M.A., and Ratcliffe, A. Human articular chondrocyte adhesion and proliferation on synthetic biodegradable polymer films. Biomaterials 20, 2245, 1999.
39. Wu, Y.C., Shaw, S.H., Lin, H.R., Lee, T.M., and Yang, C.Y. Bone tissue engineering evaluation based on rat calvaria stromal cells cultured on modified PLGA scaffolds. Biomaterials 27, 896, 2006.
40. Xue, W., Krishna, B.V., Bandyopadhyay, A., and Bose, S. Processing and biocompatibility evaluation of laser processed porous titanium. Acta Biomater. 3, 1007, 2007.
41. Hollander, D.A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., and Erli, H.J. Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. Biomaterials 27, 955, 2006.
42. Wirtz, T. Herstellung von Knochenimplantaten aus Titanwerkstoffen durch Laserformen [Ph.D. thesis]. Faculty of Mechanical Engineering, RWTH Aachen, Germany, 2005.
43. St.-Pierre, J., Gauthier, M., Lefebvre, L., and Tabriziana, M. Three-dimensional growth of differentiating MC3T3-E1 preosteoblasts on porous titanium scaffolds. Biomaterials 26,7319, 2005.