Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments

Acta Biomaterialia

Volumn 7, Issue 3, 2011, Pages 1398-1406

  Pattanayak, Deepak K ^a   Fukuda, A ^b   Matsushita, T ^a   Takemoto, M ^b   Fujibayashi, S ^b   Sasaki, K ^c   Nishida, N ^c   Nakamura, T ^b   Kokubo, T ^a  

^a CHUBU UNIVERSITY   (Japan)

^b KYOTO UNIVERSITY   (Japan)

^c Sagawa Printing Co Ltd   (Japan)

Author keywords

Chemical treatment; Compressive strength; In vitro and in vivo studies; Porous titanium; Selective laser melting

Indexed keywords

BONE; COMPRESSIVE STRENGTH; MELTING; PARTICLE SIZE; PHOSPHATE MINERALS; POWDER METALS; SCANNING; SCANNING ELECTRON MICROSCOPY; SELECTIVE LASER MELTING; SODIUM HYDROXIDE; TITANIUM OXIDES;

CANCELLOUS BONE; CHEMICAL TREATMENTS; IN VITRO AND IN VIVO STUDY; IN-VITRO; POROUS BODIES; POROUS TITANIA; SELECTIVE LASER MELTING; TITANIUM METALS; TITANIUM POWDERS; VITRO AND IN VIVO STUDIES;

FABRICATION;

HYDROCHLORIC ACID; TITANIUM; TITANIUM DIOXIDE;

ANIMAL EXPERIMENT; ANIMAL TISSUE; ARGON LASER; ARTICLE; BINDING AFFINITY; CANCELLOUS BONE; COMPRESSIVE STRENGTH; HEAT TREATMENT; IN VIVO STUDY; LASER; MALE; MELTING POINT; METAL IMPLANTATION; NONHUMAN; OSSIFICATION; PARTICLE SIZE; POROSITY; PRIORITY JOURNAL; SELECTIVE LASER MELTING; SURFACE PROPERTY;

ORYCTOLAGUS CUNICULUS;

EID: 79251639042     PISSN: 17427061     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actbio.2010.09.034     Document Type: Article

References (36)

1. G. Ryan, A. Pandit, and D.P. Apatsidis Fabrication methods of porous metals for use in orthopaedic applications Biomaterials 27 2006 2651 2670
2. C.E. Wen, Y. Yamada, K. Shimojima, Y. Chino, H. Hosokawa, and M. Mabuchi Novel titanium foam for bone tissue engineering J Mater Res 17 2002 2633 2639
3. D.K. Pattanayak, T. Matsushita, K. Doi, H. Takadama, T. Nakamura, and T. Kokubo Effects of oxygen content of porous titanium metal on its apatite-forming ability and compressive strength J Mater Sci Eng C 29 2009 1974 1978
4. S. Das, M. Wohlert, J.J. Beaman, and D.L. Bourell Processing of titanium net shapes by SLS/HIP Mater Des 20 1999 115 121
5. P. Fischer, V. Romano, H.P. Weber, N.P. Karapatis, E. Boillat, and R. Glardon Sintering of commercially pure titanium powder with a Nd:YAG laser source Acta Mater 51 2003 1651 1662
6. A. Simchi, F. Petzoldt, and H. Pohl On the development of direct metal laser sintering for rapid tooling J. Mater Process Technol 141 2003 319 328
7. J.M. Williams Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering Biomaterials 26 2005 4817 4827
8. E.C. Santos, M. Shiomi, K. Osakada, and T. Laoui Rapid manufacturing of metal components by laser forming Int J Machine Tools Manuf 46 2006 1459 1468
9. T. Traini, C. Mangano, R.L. Sammons, F. Mangano, A. Macchi, and A. Piattelli Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants Dent Mater 24 2008 1525 1533
10. S. Kumar, and J.P. Kruth Composites by rapid prototyping technology Mater Des 31 2010 850 856
11. D.A. Hollander, M.V. Walter, T. Wirtz, R. Sellei, B.S. Rohlfing, and O. Paar Structural, mechanical and in vitro characterization of individually structured Ti6Al4V produced by direct laser forming Biomaterials 27 2006 955 963
12. C.Y. Lin, T. Wirtz, F. LaMarca, and S.J. Hollister Structural and mechanical evaluations of a topology optimized titanium interbody fusion cage fabricated by selective laser melting process J Biomed Mater Res A 83 2007 272 279
13. I. Yadroitsev Bertrand Ph, Smurov I. Parametric analysis of the selective laser melting process Appl Surf Sci 253 2007 8064 8069
14. L. Mullen, R.C. Stamp, W.K. Brooks, E. Jones, and C.J. Sutcliffe Selective laser melting: a regular unit cell approach for the manufacture of porous, titanium, bone ingrowth constructs, suitable for orthopedic applications J Biomed Mater Res B Appl Biomater 89 2009 325 334
15. L. Mullen, R.C. Stamp, P. Fox, E. Jones, C. Ngo, and C.J. Sutcliffe Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures J Biomed Mater Res B Appl Biomater 92 2009 178 188
16. L. Hao, S. Dadbakhsh, O. Seaman, and M. Felstead Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development J Mater Process Technol 209 2009 5793 5801
17. R. Stamp, P. Fox, W.O. Neill, E. Jones, and C. Sutcliffe The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting J Mater Sci Mater Med 20 2009 1839 1848
18. L. Thijs, F. Verhaeghe, T. Craeghs, J.V. Humbeeck, and J.P. Kruth A study of the microstructural evolution during selective laser melting of Ti6Al4V Acta Mater 58 2010 3303 3312
19. P. Heinl, L. Muller, C. Korner, R.F. Singer, and F.A. Muller Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting Acta Biomater 4 2008 1536 1544
20. S.A. Hacking, M. Tanzer, E.J. Harvey, J.J. Krygier, and J.D. Bobyn Relative contributions of chemistry and topography to the osseointegration of hydroxyapatite coatings Clin Orthoped Rel Res 405 2002 24 38
21. H.M. Kim, F. Miyaji, T. Kokubo, and T. Nakamura Preparation of bioactive Ti and its alloys via simple chemical surface treatment J Biomed Mater Res 32 1996 409 417
22. S. Nishiguchi, S. Fujibayashi, H.M. Kim, T. Kokubo, and T. Nakamura Biology of alkali- and heat-treated titanium implants J Biomed Mater Res A 67 2003 26 35
23. S. Fujibayashi, M. Neo, H.M. Kim, T. Kokubo, and T. Nakamura Osteoinduction of porous bioactive titanium metal Biomaterials 25 2004 443 450
24. K. Kawanabe A new cementless total hip arthroplasty with bioactive titanium porous coating by alkaline and heat treatment: average 4.8 year results J Biomed Mater Res B Appl Biomater 90 2009 476 481
25. D.K. Pattanayak, T. Kawai, T. Matsushita, H. Takadama, T. Nakamura, and T. Kokubo Effect of HCl concentrations on apatite-forming ability of NaOH-HCl- and heat-treated titanium metal J Mater Sci Mater Med 20 2009 1401 1411
26. M. Takemoto, S. Fujibayashi, M. Neo, J. Suzuki, T. Kokubo, and T. Nakamura Mechanical properties and osteoconductivity of porous bioactive titanium Biomaterials 26 2005 6014 6023
27. M. Takemoto, S. Fujibayashi, M. Neo, J. Suzuki, T. Matsushita, and T. Kokubo Osteoinductive porous titanium implants: effect of sodium removal by dilute HCl treatment Biomaterials 27 2006 2682 2691
28. M. Takemoto A porous bioactive titanium implant for spinal interbody fusion: an experimental study using a canine model J Neurosur Spine 7 2007 435 443
29. T. Kokubo, and H. Takadama How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27 2006 2907 2915
30. S. Fujibayashi, T. Nakamura, S. Nishiguchi, J. Tamura, M. Uchida, and H.M. Kim Bioactive titanium: effect of sodium removal on the bone-bonding ability of bioactive titanium prepared by alkali and heat treatment J Biomed Mater Res 56 2001 562 570
31. 2 glasses Biomaterials 24 2003 1349 1356
32. C. Maniatopoulos, A. Rodriguez, D.A. Deporter, and A.H. Melcher An improved method for preparing histological sections of metallic implants Int J Oral Maxillofac Implants 1 1986 31 37
33. T. Nakamura, and M. Takemoto Osteoconduction and its evaluation T. Kokubo, Bioceramics and their clinical applications 2008 Woodhead Publishing Cambridge 183 198
34. Y.Z. Yang, J.M. Tian, J.T. Tian, Z.Q. Chen, X.J. Deng, and D.H. Zhang Preparation of graded porous titanium coatings on titanium implant materials by plasma spraying J Biomed Mater Res 52 2000 333 337
35. D.K. Pattanayak Fabrication of bioactive porous Ti metal with structure similar to human cancellous bone by selective laser melting Bioceramics 22 2009 163 166
36. K. Tanaka, M. Takemoto, S. Fujibayashi, K. Kawanabe, T. Matsushita, and T. Kokubo Long-term study of osteoconductivity of bioactive porous titanium metals: effect of sodium removal by dilute HCl treatment Key Eng Mater 396-398 2009 353 356