High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints

Acta Biomaterialia

Volumn 30, Issue , 2016, Pages 345-356

  Arabnejad, Sajad ^a   Burnett Johnston, R ^a   Pura, Jenny Ann ^b   Singh, Baljinder ^a   Tanzer, Michael ^c   Pasini, Damiano ^a  

^a MCGILL UNIVERSITY   (Canada)

^b MCGILL UNIVERSITY   (Canada)

^c MONTREAL GENERAL HOSPITAL   (Canada)

Author keywords

Additive manufacturing; Bone ingrowth; Lattice materials; Mechanical properties; Porous biomaterials

Indexed keywords

BIOMATERIALS; BIOMECHANICS; BONE; CELLS; COMPRESSION TESTING; COMPUTERIZED TOMOGRAPHY; CYTOLOGY; GEOMETRY; INDUSTRIAL RESEARCH; PORE SIZE; SCAFFOLDS (BIOLOGY); STIFFNESS; TOPOLOGY; TRUSSES;

BONE INGROWTH; CELL TOPOLOGY; HIGH-STRENGTH; LATTICE MATERIALS; LOAD-BEARING; MANUFACTURING CONSTRAINT; ORTHOPAEDIC APPLICATIONS; POROUS BIOMATERIAL; SELECTIVE LASER MELTING; TETRAHEDRA;

3D PRINTERS;

BIOMATERIAL; TANTALUM; BONE PROSTHESIS;

ANIMAL EXPERIMENT; ARTICLE; BONE GROWTH; BONE INGROWTH; CELL STRUCTURE; COMPRESSION; CONTROLLED STUDY; FOAM; IN VIVO STUDY; MECHANICS; MELTING POINT; MICRO-COMPUTED TOMOGRAPHY; MORPHOLOGY; NONHUMAN; POROSITY; PRIORITY JOURNAL; RIGIDITY; STRENGTH; ANIMAL; BONE PROSTHESIS; BONE REGENERATION; CHEMISTRY; DISEASE MODEL; DOG; FEMORAL FRACTURES; MECHANICAL STRESS; METABOLISM; PATHOLOGY; PHARMACOLOGY;

ANIMALS; BONE REGENERATION; BONE SUBSTITUTES; DISEASE MODELS, ANIMAL; DOGS; FEMORAL FRACTURES; POROSITY; STRESS, MECHANICAL; X-RAY MICROTOMOGRAPHY;

EID: 84951567770     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2015.10.048     Document Type: Article

References (64)

1. L.S. Nair, and C.T. Laurencin Biodegradable polymers as biomaterials Prog. Polym. Sci. 32 2007 762 798
2. B. Levine A new era in porous metals: applications in orthopaedics Adv. Eng. Mater. 10 2008 788 792
3. S.J. Hollister, and W.L. Murphy Scaffold translation: barriers between concept and clinic Tissue Eng. Part B: Rev. 17 6 2011 459 474
4. G.H. Billström, A.W. Blom, S. Larsson, and A.D. Beswick Application of scaffolds for bone regeneration strategies: current trends and future directions Injury 44 2013 S28 S33
5. S. Wu, X. Liu, K.W. Yeung, C. Liu, and X. Yang Biomimetic porous scaffolds for bone tissue engineering Mater. Sci. Eng.: R: Rep. 80 2014 1 36
6. S.A. Khanoki, and D. Pasini Multiscale design and multiobjective optimization of orthopedic hip implants with functionally graded cellular material J. Biomech. Eng. 134 2012 031004
7. S.A. Khanoki, and D. Pasini The fatigue design of a bone preserving hip implant with functionally graded cellular material J. Med. Devices 7 2013 020907
8. J. Bobyn, E. Mortimer, A. Glassman, C. Engh, J. Miller, and C. Brooks Producing and avoiding stress shielding: laboratory and clinical observations of noncemented total hip arthroplasty Clin. Orthop. Relat. Res. 274 1992 79 96
9. A. Glassman, J. Bobyn, and M. Tanzer New femoral designs do they influence stress shielding? Clin. Orthop. Relat. Res. 453 2006 64 74
10. M. Fini, G. Giavaresi, P. Torricelli, V. Borsari, R. Giardino, A. Nicolini, and et al. Osteoporosis and biomaterial osteointegration Biomed. Pharmacother. Biomed. Pharmacother. 58 2004 487 493
11. J. Bobyn, R. Pilliar, H. Cameron, and G. Weatherly The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone Clin. Orthop. Relat. Res. 150 1980 263
12. J. Bobyn, G. Stackpool, S. Hacking, M. Tanzer, and J. Krygier Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial J. Bone Joint Surg. Br. 81 1999 907 914
13. A.C. Jones, C.H. Arns, D.W. Hutmacher, B.K. Milthorpe, A.P. Sheppard, and M.A. Knackstedt The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth Biomaterials 30 2009 1440 1451
14. J.E. Biemond, R. Aquarius, N. Verdonschot, and P. Buma Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology Arch. Orthop. Trauma Surg. 131 2011 711 718
15. C.M. Bidan, K.P. Kommareddy, M. Rumpler, P. Kollmannsberger, P. Fratzl, and J.W. Dunlop Geometry as a factor for tissue growth: towards shape optimization of tissue engineering scaffolds Adv. Healthcare Mater. 2 2013 186 194
16. H. Kienapfel, C. Sprey, A. Wilke, and P. Griss Implant fixation by bone ingrowth J. Arthroplasty 14 1999 355 368
17. P. Heinl, L. Müller, C. Körner, R.F. Singer, and F.A. Müller Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting Acta Biomater. 4 2008 1536 1544
18. C. Bragdon, M. Jasty, M. Greene, H. Rubash, and W. Harris Biologic fixation of total hip implants: insights gained from a series of canine studies J. Bone Joint Surg. 86 2004 105 117
19. G. Ryan, A. Pandit, and D.P. Apatsidis Fabrication methods of porous metals for use in orthopaedic applications Biomaterials 27 2006 2651 2670
20. J.M. Sobral, S.G. Caridade, R.A. Sousa, J.F. Mano, and R.L. Reis Three-dimensional plotted scaffolds with controlled pore size gradients: effect of scaffold geometry on mechanical performance and cell seeding efficiency Acta Biomater. 7 2011 1009 1018
21. M. de Wild, R. Schumacher, K. Mayer, E. Schkommodau, D. Thoma, M. Bredell, and et al. Bone regeneration by the osteoconductivity of porous titanium implants manufactured by selective laser melting: a histological and micro computed tomography study in the rabbit Tissue Eng. Part A 19 2013 2645 2654
22. L.E. Murr, S.M. Gaytan, E. Martinez, F. Medina, and R.B. Wicker Next generation orthopaedic implants by additive manufacturing using electron beam melting Int. J. Biomater. 2012 2012
23. L. Murr, S. Gaytan, F. Medina, H. Lopez, E. Martinez, B. Machado, and et al. Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays Philos. Trans. R. Soc. A: Math. Phys. Eng. Sci. 368 2010 1999 2032
24. J. Parthasarathy, B. Starly, S. Raman, and A. Christensen Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM) J. Mech. Behav. Biomed. Mater. 3 2010 249 259
25. L. Mullen, R. Stamp, W. Brooks, E. Jones, and C. Sutcliffe Selective laser melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications J. Biomed. Mater. Res. B Appl. Biomater. 89 2008 325 334
26. S. Arabnejad Khanoki, and D. Pasini Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem J. Mech. Behav. Biomed. Mater. 22 2013 65 83
27. A. Khoda, I.T. Ozbolat, and B. Koc Engineered tissue scaffolds with variational porous architecture J. Biomech. Eng. 133 2011 011001
28. M.A. Wettergreen, B.S. Bucklen, B. Starly, E. Yuksel, W. Sun, and M.A.K. Liebschner Creation of a unit block library of architectures for use in assembled scaffold engineering Comput. Aided Des. 37 2005 1141 1149
29. C. Cheah, C. Chua, K. Leong, and S. Chua Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: investigation and classification Int. J. Adv. Manuf. Technol. 21 2003 291 301
30. C. Cheah, C. Chua, K. Leong, and S. Chua Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: parametric library and assembly program Int. J. Adv. Manuf. Technol. 21 2003 302 312
31. S. Van Bael, Y.C. Chai, S. Truscello, M. Moesen, G. Kerckhofs, H. Van Oosterwyck, and et al. The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds Acta Biomater. 8 2012 2824 2834
32. S.J. Li, L.E. Murr, X.Y. Cheng, Z.B. Zhang, Y.L. Hao, R. Yang, and et al. Compression fatigue behavior of Ti-6Al-4V mesh arrays fabricated by electron beam melting Acta Mater. 60 2012 793 802
33. S. Arabnejad, and D. Pasini Mechanical properties of lattice materials via asymptotic homogenization and comparison with alternative homogenization methods Int. J. Mech. Sci. 77 2013 249 262
34. O.L.A. Harrysson, O. Cansizoglu, D.J. Marcellin-Little, D.R. Cormier, and H.A. West Ii Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology Mater. Sci. Eng. C 28 2008 366 373
35. S. Van Bael, G. Kerckhofs, M. Moesen, G. Pyka, J. Schrooten, and J.P. Kruth Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures Mater. Sci. Eng. A 528 2011 7423 7431
36. V. Deshpande, M. Ashby, and N. Fleck Foam topology: bending versus stretching dominated architectures Acta Mater. 49 2001 1035 1040
37. A. Vigliotti, and D. Pasini Linear multiscale analysis and finite element validation of stretching and bending dominated lattice materials Mech. Mater. 46 2012 57 68
38. L.J. Gibson, and M.F. Ashby Cellular Solids: Structure and Properties 1999 Cambridge University Press Cambridge, UK
39. M.S.A. Elsayed, and D. Pasini Multiscale structural design of columns made of regular octet-truss lattice material Int. J. Solids Struct. 47 2010 1764 1774
40. V. Deshpande, N. Fleck, and M. Ashby Effective properties of the octet-truss lattice material J. Mech. Phys. Solids 49 2001 1747 1769
41. A. Vigliotti, and D. Pasini Stiffness and strength of tridimensional periodic lattices Comput. Methods Appl. Mech. Eng. 229-232 2012 27 43
42. A. Vigliotti, and D. Pasini Mechanical properties of hierarchical lattices Mech. Mater. 62 2013 32 43
43. A. Vigliotti, V.S. Deshpande, and D. Pasini Non linear constitutive models for lattice materials J. Mech. Phys. Solids 64 2014 44 60
44. L. Mullen, R. Stamp, P. Fox, E. Jones, C. Ngo, and C. Sutcliffe Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures J. Biomed. Mater. Res. Part B: Appl. Biomater. 92 2009 178 188
45. S.J. Hollister Porous scaffold design for tissue engineering Nat. Mater. 4 2005 518 524
46. H. Kang, C.Y. Lin, and S.J. Hollister Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity Struct. Multidiscip. Optim. 42 2010 633 644
47. M.S.A. Elsayed, and D. Pasini Analysis of the elastostatic specific stiffness of 2D stretching-dominated lattice materials Mech. Mater. 42 2010 709 725
48. M. Goldberg Three infinite families of tetrahedral space-fillers J. Comb. Theory Ser. A 16 1974 348 354
49. J.E. Lemons Quantitative Characterization and Performance of Porous Implants for Hard Tissue Applications: A Symposium 1987 ASTM International
50. A.C. Jones, C.H. Arns, A.P. Sheppard, D.W. Hutmacher, B.K. Milthorpe, and M.A. Knackstedt Assessment of bone ingrowth into porous biomaterials using MICRO-CT Biomaterials 28 2007 2491 2504
51. C. Lin, and J. Miller Network analysis of filter cake pore structure by high resolution X-ray microtomography Chem. Eng. J. 77 2000 79 86
52. V. Karageorgiou, and D. Kaplan Porosity of 3D biomaterial scaffolds and osteogenesis Biomaterials 26 2005 5474 5491
53. I. Yadroitsev, I. Shishkovsky, P. Bertrand, and I. Smurov Manufacturing of fine-structured 3D porous filter elements by selective laser melting Appl. Surf. Sci. 255 2009 5523 5527
54. E. Abele, H.A. Stoffregen, M. Kniepkamp, S. Lang, and M. Hampe Selective laser melting for manufacturing of thin-walled porous elements J. Mater. Process. Technol. 215 2015 114 122
55. Normalisation OId, Standardization IOf. ISO 13314: ISO, 2011.
56. S. McKown, Y. Shen, W. Brookes, C. Sutcliffe, W. Cantwell, G. Langdon, and et al. The quasi-static and blast loading response of lattice structures Int. J. Impact Eng 35 2008 795 810
57. C. Yan, L. Hao, A. Hussein, and D. Raymont Evaluations of cellular lattice structures manufactured using selective laser melting Int. J. Mach. Tools Manuf. 62 2012 32 38
58. C. Yan, L. Hao, A. Hussein, P. Young, and D. Raymont Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting Mater. Des. 55 2014 533 541
59. G. Pyka, A. Burakowski, G. Kerckhofs, M. Moesen, S. Van Bael, J. Schrooten, and et al. Surface modification of Ti6Al4V open porous structures produced by additive manufacturing Adv. Eng. Mater. 14 2012 363 370
60. L. Mullen, R.C. Stamp, P. Fox, E. Jones, C. Ngo, and C.J. Sutcliffe Selective laser melting: a unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures J. Biomed. Mater. Res. Part B: Appl. Biomater. 92B 2010 178 188
61. L.D. Zardiackas, D.E. Parsell, L.D. Dillon, D.W. Mitchell, L.A. Nunnery, and R. Poggie Structure, metallurgy, and mechanical properties of a porous tantalum foam J. Biomed. Mater. Res. 58 2001 180 187
62. L.L. Hermansen, M. Sørensen, J. Barckman, J.E. Bechtold, K. Søballe, and J. Baas Incorporation of raloxifene-impregnated allograft around orthopedic titanium implants impairs early fixation but improves new bone formation: a 4-week study in 12 dogs Acta Orthopaedica 85 2014 1 7
63. S.R. Frenkel, W.L. Jaffe, F. Dimaano, K. Iesaka, and T. Hua Bone response to a novel highly porous surface in a canine implantable chamber J. Biomed. Mater. Res. B Appl. Biomater. 71 2004 387 391
64. M. Doyoyo, and J.W. Hu Multi-axial failure of metallic strut-lattice materials composed of short and slender struts Int. J. Solids Struct. 43 2006 6115 6139