Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 3, Issue 3, 2010, Pages 249-259

  Parthasarathy, Jayanthi ^a   Starly, Binil ^a   Raman, Shivakumar ^a   Christensen, Andy ^b  

^a University of Oklahoma   (United States)

^b Medical Modeling LLC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSION TESTS; COMPRESSIVE STIFFNESS; CONTROLLED POROSITY; CONVENTIONAL METHODS; CRANIOFACIAL DEFECTS; EFFECTIVE STIFFNESS; GRAIN DENSITY; IMAGE-BASED; INTERCONNECTED PORES; MECHANICAL CHARACTERIZATIONS; MECHANICAL EVALUATION; MECHANICAL STRENGTH; MICRO CT; MICRO-STRUCTURAL; ONE STEP; PATIENT SPECIFIC; PERSONALIZED MEDICINES; POROUS IMPLANTS; POROUS STRUCTURES; POROUS TITANIUM; POWDER MATERIAL; RAPID MANUFACTURING; SAMPLE SETS; SEM STUDY; STRUT THICKNESS; TI-6AL-4V; TITANIUM IMPLANTS;

COMPRESSION TESTING; COMPUTERIZED TOMOGRAPHY; ELECTRON BEAM FURNACES; ELECTRON BEAM MELTING; ELECTRON BEAMS; FABRICATION; INDUSTRIAL ENGINEERING; MELTING; POROSITY; PRODUCTION ENGINEERING; STIFFNESS; STRUCTURAL ANALYSIS; STRUTS; TITANIUM;

COMPRESSIVE STRENGTH;

TITANIUM;

ARTICLE; BIOMEDICAL ENGINEERING; COMPRESSIVE STRENGTH; ELECTRON BEAM; ELECTRON BEAM MELTING; IMPLANT; MELTING POINT; MICRO-COMPUTED TOMOGRAPHY; MICROANALYSIS; POROSITY; POWDER; PRIORITY JOURNAL; RIGIDITY; SCANNING ELECTRON MICROSCOPY; THICKNESS;

BONE AND BONES; BONE SUBSTITUTES; COMPRESSIVE STRENGTH; ELECTRONS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POROSITY; PROSTHESES AND IMPLANTS; SURFACE PROPERTIES; TITANIUM; WEIGHT-BEARING; X-RAY MICROTOMOGRAPHY;

EID: 75149134663     PISSN: 17516161     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2009.10.006     Document Type: Article

References (38)

1. Andreola F., Leonelli C., Romagnoli M., and Miselli P. Techniques used to determine porosity. American Ceramic Society Bulletin 79 7 (2000) 49-52
2. Ashby M.F., and Gibson. Cellular Solids: Structures and Properties (1988), Pergamon Press
3. Ashman, R.B., 1982. Ultrasonic determination of the elastic properties of cortical bone: Techniques and limitations. Ph.D. Dissertation, Tulane University, New Orleans
4. Brånemark P.-I., Hansson B.O., Adell R., Breine U., Lindström J., Hallén O., and Öhman A. Osseo Integrated Implants in the Treatment of the Edentulous Jaw (1977), Almqvist and Wiksell, Stockholm p. 132
5. Dabney C.L.S., and Dechow P.C. Variations in cortical material properties throughout the human dentate mandible. American Journal of Physical Anthropology 120 (2003) 252-277
6. Harrysson O., and Cormier D. Direct fabrication of custom orthopedic implants using electron beam melting technology. In: Gibson Dr.I. (Ed). Advanced Manufacturing Technology for Medical Applications (2006) 191-206
7. Harrysson O., Cansizoglu O., Denis Little D.M., Cormier D., and West H.A. Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. Materials Science & Engineering-A (2007) 10.1016/j.msec.04.022
8. Harrysson O., Deaton B., Bardin J., West H., Cansizoglu O., Cormier D., and Little D.M. Evaluation of titanium implant components directly fabricated through electron beam melting technology. Advanced Materials & Processes 163 7 (2005) 72-77
9. Heinl P., Muller L., Körner C., Singer R.F., and Muller F.A. Cellular Ti-6Al4V structures with interconnected macroporosity for bone implants fabricated by selective electron beam melting. Acta Biomateralia 4 (2008) 1536-1544
10. Heinl P., Rottmair A., Körner A., and Singer R.F. Cellular titanium by selective electron beam melting. Advanced Engineering Materials 9 5 (2007) 360-364
11. Jacobs J.J., Gilbert J.L., and Urban R.M. Corrosion of metal orthopedic implants. Journal of Bone and Joint Surgery 80 (1998) 268-282
12. Khan S.N., Tomin E., and Lane J.M. Clinical applications of bone graft substitutes. Tissue Engineering in Orthopedic Surgery 31 (2000) 389-398
13. Kummailil J., Sammarco C., Skinner D., Brown C.A., and Rong K. Effect of select lens TM processing parameters on the deposition of Ti-6AI-4V. Journal of Manufacturing Processes 7 1 (2005) 42-50
14. Laoui, T., Santos, E., Osakada, K., Shiomi, M., Morita, M., Shaik, S.K., Tolochko, N.K., Abe, F., 2004. Properties of titanium implants made by laser processing. Laser net shape engineering. In: M. Geiger, A. Otto (Eds.), Proceedings of LANE, pp. 475-484
15. Levi A.D., Choi W.G., Keller P.J., Heiserman J.E., Sonntag V.K., and Dickman C.A. The radiographic and imaging characteristics of porous tantalum implants within the human cervical spine. Spine 23 (1998) 1245-1250
16. Levine B.R., Sporer S., Poggie R.A., Valle C.J.D., and Jacobs J.J. Experimental and clinical performance of porous tantalum on orthopedic surgery. Biomaterials 27 27 (2006) 4671-4681
17. Li Q., Chen E.Y., Bice D.R., and Dunand D.C. Mechanical properties of cast Ti-6Al-4V lattice block structures. Metallurgical and Materials Transactions A 39 A (2008) 441-449
18. Li J.P., Li S.H., Van Blitterswijk C.A., and De Groot K. Cancellous bone from porous titanium by multiple coating technique. Journal of Materials Science: Materials in Medicine 17 (2006) 179-185
19. Li J.P., Li S.H., De Groot K., and Layrolle P. Preparation and characterization of porous titanium. Key Engineering Material 51 5 (2002) 218-220
20. Li J.P., Wijn J.R., Van Blitterswijk C.A., and De Groot K. Comparison of porous titanium made by sponge replication and directly 3D fiber deposition and cancellous bone. Key Engineering Materials 330-332 (2007) 999-1002 pt. 2
21. Li J.P., Wijn J.R.D., Blitterswijk C.A.V., and De Groot K. Porous titanium scaffolds directly fabricated by 3D fibre deposition technique: Effect of nozzle diameter. Journal of Materials Science: Materials in Medicine 16 (2005) 1159-1163
22. Lin C.Y., Wirtz T., LaMarca F., and Hollister S.J. Structural and mechanical evaluations of a topology optimized titanium interbody fusion cage fabricated by selective laser melting process. Journal of Biomedical Materials Research Part A 83 2 (2007) 272-279
23. Marchi C.S., Despois J.F., and Mortensen A. Fabrication and compressive response of open-cell aluminum foams with sub-millimeter pores. In: Clyne T.N., and Simanick F. (Eds). Metal Matrix Composites and Metallic Foams. Euromat vol. 5 (2000), Wiley-VCH Verlag Gmbh, Weinheim 34-39
24. Misch C.E., Qu Z., and Bidez W.M. Mechanical properties of trabecular bone in the human mandible: Implications for dental implant treatment planning, and surgical placement. Journal of Oral and Maxillofacial Surgery 57 (1999) 700-706
25. Park J.B., and Lakes R.S. Biomaterials and Introduction vol. 394 (1992), Plenum, New York
26. Parthasarathy, J., Starly, B., Raman, S., 2008. Design of patient-specific porous titanium implants for craniofacial applications. In: RAPID 2008 May 20-22. Lake Buena Vista, FL, USA: Society of Manufacturing Engineers
27. Parthasarathy J., Starly B., and Raman S. Computer aided bio-modeling and analysis of patient specific porous titanium mandibular implants. Journal of Medical Devices (2009) 10.1115/1.3192104
28. Peterson J., and Dechow P. Material properties of the human cranial vault and zygoma. The Anatomical Record Part A 274 (2003) 297-785
29. Peterson J., and Dechow P. Material properties of the parietal bone. The Anatomical Record Part A 268 (2003) 7-15
30. Reilly D.T., and Burstein A.H. Elastic and ultimate properties of compact bone tissue. Journal of Biomechanics 8 (1975) 393-405
31. Robertson D.M., Pierre L., and Chahal R. Preliminary observations of bone ingrowth into porous materials. Journal of Biomedical Materials Research 10 (1976) 335-344
32. Ryan G.E., Pandit A.S., and Apatsidis D.P. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. Biomaterials 29 27 (2008) 3625-3635
33. Simone A.E., and Gibson L.J. The effect of cell face curvature and corrugations on the stiffness and strength of metallic foams. Acta Materialia 46 11 (1998) 3929-3935
34. Starly, B., Gomez, C., Darling, A., Fang, Z., Lau, A., Sun, W., Lau, W., Bradbury, T., Youssef, A., Gaylo, C., 2003. Computer-aided bone scaffold design: A biomimetic approach. In: Proceedings of the IEEE 29th Annual Northeast Bioengineering Conference, pp. 172-173
35. Sun W., Starly B., Nam J., and Darling A. Bio-CAD modeling and its application in computer-aided tissue engineering. Computer-Aided Design 37 11 (2005) 1097-1114
36. Vaucher S., Mrelli E.C., Andre C., and Beffort O. Selective laser sintering of aluminium- and titanium-based composites: Processing and characterization. Physica Status Solidi. Rapid Research Notes 3 (2003) R11-R13
37. Wang, D., Wang, C., Zhang, X., Xu, L., 2005. Design and biomechanical evaluation of a custom lateral mandible titanium prosthesis. In: IEEE-EMBS 27th Annual International Conference, Engineering in Medicine and Biology Society, pp. 6188-6191
38. Wang J.C., Warren D., Sandhu H.S., Tam V., and Delamarter R.A. Comparison of magnetic resonance and computed tomographic image quality after the implantation of tantalum and titanium spinal instrumentation. Spine 23 15 (1998) 1684-1688