Selective laser sintering process optimization for layered manufacturing of CAPA® 6501 polycaprolactone bone tissue engineering scaffolds

Journal of Manufacturing Science and Engineering

Volumn 128, Issue 2, 2006, Pages 531-540

  Partee, Brock ^a   Hollister, Scott J ^a   Das, Suman ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CARTILAGE; LASER APPLICATIONS; LAYERED MANUFACTURING; LIGAMENTS; SINTERING; TENDONS; TISSUE;

BIORESORBABLE MATERIALS; POLYCAPROLACTONE; SELECTIVE LASER SINTERING (SLS); TISSUE ENGINEERING;

BONE;

EID: 33745450140     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2162589     Document Type: Article

References (59)

1. Langer, R., and Vacanti, P.J., 1993, "Tissue Engineering," Science, 260(5110), pp. 920-926.
2. Griffith, L. G., and Naughton, G., 2002, "Tissue Engineering - Current Challenges and Expanding Opportunities," Science, 295(5557), pp. 1009-1014.
3. Yang, S., Leong, K. F., Du, Z., and Chua, C. K., 2001, "The Design of Scaffolds for Use in Tissue Engineering. Part I. Traditional Factors," Tissue Eng., 7(6), pp. 679-689.
4. Hollister, S. J., Lin, C. Y., Lin, C. Y., Schek, R. D., Taboas, J. M., Flanagan, C. L., Saito, E., Williams, J. M., Das, S., Wirtz, T., and Krebsbach, P. H., 2004, "Design and Fabrication of Scaffolds for Anatomic Bone Reconstruction," Med. J. Malaysia, 59 Suppl B, pp. 131-132.
5. Das, S., and Hollister, S. J., 2001, "Tissue Engineering Scaffolds," Buschow. K. H. J., Cahn, R. W., Flemings, M. C., Ilschner, B., Kramer, E. J., and Mahajan, S., eds., Encyclopedia of Materials: Science and Technology, Elsevier, Amsterdam.
6. Hollister, S. J., Maddox, R. D., and Taboas, J. M., 2002, "Optimal Design and Fabrication of Scaffolds to Mimic Tissue Properties and Satisfy Biological Constraints," Biomaterials, 23(20), pp. 4095-4103.
7. Hollister, S. J., Lin, C. Y., Saito, E., Lin, C. Y., Schek, R. M., Taboas, J. M., Williams, J. M., Partee, B., Flanagan, C. L., Diggs, A., Wilke, E. N., Van Lenthe, G. H., Muller, R., Wirtz, T., Das, S., Feinberg, S. E., and Krebsbach, P. H., 2005, "Engineering Craniofacial Scaffolds," Orthodont. Craniofacial Res., 8(3), pp. 162-173.
8. Bonassar, L. J., and Vacanti, C. A., 1998, "Tissue Engineering: The First Decade and Beyond," J. Cell Biochem. Suppl., Suppl. 30-31, pp. 297-303.
9. Hutmacher, D. W., 2000, "Scaffolds in Tissue Engineering Bone and Cartilage," Biomaterials, 21(24), pp. 2529-2543.
10. Yang, S., Leong, K. F., Du, Z., and Chua, C. K., 2002, "The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques," Tissue Eng., 8(1), pp. 1-11.
11. Mikos, A. G., Sarakino, G., Lyman, M. D., Ingber, D. E., Vacanti, J. P., and Langer, R., 1993, "Prevascularization of Porous Biodegradable Polymers," Biotechnol. Bioeng., 42(6), pp. 716-723.
12. Bruder, S. P., Kraus, K. H., Goldberg, V. M., and Kadiyala, S., 1998, "The Effect of Implants Loaded With Autologous Mesenchymal Stem Cells on the Healing of Canine Segmental Bone Defects," J. Bone Jt. Surg., Am. Vol., 80(7), pp. 985-996.
13. Sampath, T. K., and Reddi, A. H., 1984, "Importance of Geometry of the Extracellular Matrix in Endochondral Bone Differentiation," J. Cell Biol., 98(6), pp. 2192-2197.
14. Kuboki, Y., Saito, T., Murata, M., Takita, H., Mizuno, M., Inoue, M., Nagai, N., and Poole, A. R., 1995, "Two Distinctive BMP-Carriers Induce Zonal Chondrogenesis and Membranous Ossification, Respectively; Geometrical Factors of Matrices for Cell-Differentiation," Connect. Tissue Res., 32(1-4), pp. 219-226.
15. Mahmood, J., Takita, H., Ojima, Y., Kobayashi, M., Kohgo, T., and Kuboki, Y., 2001, "Geometric Effect of Matrix Upon Cell Differentiation: BMP-Induced Osteogenesis Using a New Bioglass with a Feasible Structure," J. Biochem. (Tokyo), 129(1), pp. 163-171.
16. Kuboki, Y., Takita, H., Kobayashi, D., Tsuruga, E., Inoue, M., Murata, M., Nagai, N., Dohi, Y., and Ohgushi, H., 1998, "BMP-Induced Osteogenesis on the Surface of Hydroxyapatite with Geometrically Feasible and Nonfeasible Structures: Topology of Osteogenesis," J. Biomed. Mater. Res., 39(2), pp. 190-199.
17. Tsuruga, E., Takita, H., Itoh, H., Wakisaka, Y. and Kuboki, Y., 1997, "Pore Size of Porous Hydroxyapatile as the Cell-Substratum Controls BMP-Induced Osteogenesis," J. Biochem. (Tokyo), 121(2), pp. 317-324.
18. Cima, L. G., Vacanti, J. P., Vacanti, C., Ingber, D., Mooney, D., and Langer, R., 1991, "Tissue Engineering by Cell Transplantation Using Degradable Polymer Substrates," J. Biomech. Eng., 113(2), pp. 143-151.
19. Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P., and Langer, R., 1996, "Novel Approach to Fabricate Porous Sponges of poly(D,L-lactic-co-glycolic acid) Without the Use of Organic Solvents," Biomaterials, 17(14), pp. 1417-1422.
20. Taboas, J. M., Maddox, R. D., Krebsbach, P. H., and Hollister, S. J., 2003, "Indirect Solid Free Form Fabrication of Local and Global Porous. Biomimetic and Composite 3D Polymer-Ceramic Scaffolds," Biomaterials, 24(1), pp. 181-194.
21. Hollister, S. J., Levy, R. A., Chu, T. M., Halloran, J. W., and Feinberg, S. E., 2000. "An Image-Based Approach for Designing and Manufacturing Craniofacial Scaffolds," Int. J. Oral Maxillofac Surg., 29(1), pp. 67-71.
22. Das, S., Hollister, S. J., Flanagan, C., Adewunmi, A., Bark, K., Chen, C., Ramaswamy, K., Rose, D., and Widjaja, E., 2003. "Freeform Fabrication of Nylon-6 Tissue Engineering Scaffolds," Rapid Prototyping J., 9(1), pp. 43-49.
23. Beaman, J. J., Barlow, J. W., Bourell, D. L., Crawford, R. H., Marcus, H. L., and McAlea, K. P., 1997, Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Boston.
24. Hutmacher, D. W., 2001, "Scaffold Design and Fabrication Technologies for Engineering Tissues-State of the Art Future Perspectives," J. Biomater. Sci., Polym. Ed., 12(1), pp. 107-124.
25. Hutmacher, D. W., Sittinger, M., and Risbud, V.M., 2004, "Scaffold-Based Tissue Engineering: Rationale for Computer-Aided Design and Solid Free-Form Fabrication Systems," Trends Biotechnol., 22(7), pp. 354-362.
26. Sachlos, E., and Czernuska, J. T., 2003, "Making Tissue Engineering Scaffolds Work. Review on the Application of Solid Freeform Fabrication Technology to the Production of Tissue Engineering Scaffolds," Eur. Cells Mater, 5 pp. 29-40.
27. Wu, B. M., Borland, S. W., Giordano, R. A., Cima, L. G., Sachs, E. M., and Cima, M. J., 1996, "Solid Free-Form Fabrication of Drug Delivery Devices," J. Controlled Release, 40(1-2), pp. 77-87.
28. Giordano, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., and Cima, M. J., 1996, "Mechanical Properties of Dense Polylactic Acid Structures Fabricated by Three Dimensional Printing," J. Biomater. Sci., Polym. Ed., 8(1), pp. 63-75.
29. Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., and Ratcliffe, A., 2002, "A Three-Dimensional Osteochondral Composite Scaffold for Articular Cartilage Repair," Biomaterials, 23(24), pp. 4739-4751.
30. Yan, Y., Wu, R., Zhang, R., Xiong, Z., and Lin, F., 2003, "Biomaterial Forming Research Using RP Technology," Rapid Prototyping J., 9(3), pp. 142-149.
31. Xiong, Z., Yan, Y., Zhang, R., and Sun, L., 2001, "Fabrication of Porous poly(-lactic acid) Scaffolds for Bone Tissue Engineering via Precise Extrusion," Scr. Mater., 45(7), pp. 773-779.
32. Xiong, Z., Yan, Y., Wang, S., Zhang, R., and Zhang, C., 2002, "Fabrication of Porous Scaffolds for Bone Tissue Engineering via Low-Temperature Deposition," Scr. Mater., 46(11), pp. 771-776.
33. Wang, F., Shor, L., Darling, A., Sun, W., Guceri, S., and Lau, A., 2003, "Precision Extruding Deposition and Characterization of Cellular poly-e-caprolactone Tissue Scaffolds," Solid Freeform Fabrication Symposium Proceedings, University of Texas, Austin, Texas.
34. Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., and Mikos, A. G., 2003, "Use of Stereolithography to Manufacture Critical-Sized 3D Biodegradable Scaffolds for Bone Ingrowth," J. Biomed. Mater. Res., Part B: Appl. Biomater., 64B(2), pp. 65-69.
35. Chu, T. -M. G., Halloran, J. W., Hollister, S. J., and Feinberg, S. E., 2001, "Hydroxyapatite Implants with Designed Internal Architecture," J. Mater. Sci.: Mater. Med., 12(6), pp. 471-478.
36. Sodian, R., Loebe, M., Hein, A., Martin, D. P., Hoerstrup, S. P., Potapov, E. V., Hausmann, H., Lueth, T., and Hetzer, R., 2002, "Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves," ASAIO J., 48(1), pp. 12-16.
37. Sodian, R., Loebe, M., Hein, A., Lueth, T., Martin, D. P., Potapov, E. V., Knollmann, F., and Hetzer, R., 2000, "Application of Stereolithography for Scaffold Fabrication for Tissue Engineering of Heart Valves," ASAIO J.: 46th Annual Conference and Exposition of ASAIO, Jun 28-Jul 1 2000, 46(2), p. 238.
38. Limpanuphap, S., and Derby, B., 2002, "Manufacture of Biomaterials by a Novel Printing Process," J. Mater. Sci.: Mater. Med., 13(12), pp. 1163-1166.
39. Wilson, C. E., Dhert, W. J. A., Van Blitterswijk, C. A., Verbeut, A. J., and De Bruijn, J. D., 2002, "Evaluating 3D Bone Tissue Engineered Constructs with Different Seeding Densities Using the alamarBlue™ Assay and the Effect on in vivo Bone Formation," J. Mater. Sci.: Mater. Med., 13(12), pp. 1265-1269.
40. Steidle, C., Klosterman, D., Graves, G., Osbome, N., and Chartoff, R., 1998. "Automated Fabrication of Nonresorbablc Bone Implants Using Laminated Object Manufacturing (LOM)," Solid Freeform Fabrication Simposium Proceedings, University of Texas at Austin.
41. Deckard, C. R., 1988, "Selective Laser Sintering," Ph.D. Thesis, University of Texas at Austin, Austin, TX.
42. Sun, M. M., 1991, "Physical Modeling of the Selective Laser Sintering Process," Ph.D. Thesis, University of Texas at Austin, Austin, TX.
43. Lee, G., 1997, "Selective Laser Sintering of Calcium Phosphate Materials for Orthopedic Implants," Ph.D. thesis, University of Texas at Austin, Austin, TX.
44. Vail, N. K., Swain, L. D., Fox, W. C., Aufdlemorte, T. B., Lee, G., and Barlow, J. W., 1999, "Materials for Biomedical Applications," Mater. Des., 20(2-3), pp. 123-132.
45. Berry, E., Brown, J. M., Connell, M., Craven, C. M., Efford, N. D., Radjenovic, A., and Smith, M. A., 1997. "Preliminary Experience with Medical Applications of Rapid Prototyping by Selective Laser Sintering," Med. Eng. Phys., 19(1), pp. 90-96.
46. Rimell, J. T., and Marquis, P. M., 2000, "Selective Laser Sintering of Ultra High Molecular Weight Polyethylene for Clinical Applications," J. Biomed. Mater. Res., 52(4), pp. 414-420.
47. Shishkovsky, I. V., Tarasova, E. Yu., Zhuravel, L. V., and Petrov, A. L., 2001, "The Synthesis of a Biocomposite Based on Nickel Titanium and Hydroxyapatite under Selective Laser Sintering Conditions," Tech. Phys. Lett., 27(3), pp. 211-213.
48. Das, S., Hollister, S. J., Flanagan, C., Adewunmi, A., Bark, K., Chen, C., Ramaswamy, K., Rose, D., and Widjaja, E., 2003, "Computational Design, Freeform Fabrication and Testing of Nylon-6 Tissue Engineering Scaffolds," Rapid Prototyping Technologies, Materials Research Society, Boston, MA, Vol. 758, pp. 205-210.
49. Low, K. H., Leong, K. F., Chua, C. K., Du, Z. H., and Cheah, C. M., 2001, "Characterization of SLS Parts for Drug Delivery Devices," Rapid Prototyping J., 7(5), pp. 262-268.
50. Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., and Cha, S. W., 2003, "Scaffold Development Using Selective Laser Sintering of Polyetheretherketone-Hydroxyapatite Biocomposite Blends," Biomaterials, 24(18), pp. 3115-3123.
51. Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., and Wiria, F. E., 2005, "Selective Laser Sintering of Biocompatible Polymers for Applications in Tissue Engineering," Biomed. Mater. Eng., 15(1-2), pp. 113-124.
52. Chua, C. K., Leong, K. F., Tan, K. H., Wiria, F. E., and Cheah, C. M., 2004, "Development of Tissue Scaffolds Using Selective Laser Sintering of Polyvinyl Alcohol/Hydroxyapatite Biocomposite for Craniofacial and Joint Defects," J. Mater. Sci.: Mater. Med., 15(10), pp. 1113-1121.
53. Williams, J. M., Adewunmi, A., Schek, R. M., Flanagan, C. L., Krebsbach, P. H., Feinberg, S. E., Hollister, S. J., and Das, S., 2005, "Bone Tissue Engineering Using Polycaprolactone Scaffolds Fabricated via Selective Laser Sintering," Biomaterials, 26(23), pp. 4817-4827.
54. Solvay Caprolactones, 2001, "Properties & Processing of CAPA® Thermoplastics," http://www.solvaycaprolactones.com/.
55. Hutmacher, D. W., 2001, "Polymers for Medical Applications," Encyclopedia of Materials: Science and Technology, Elsevier, Amsterdam, pp. 7664-7673.
56. Saad, B., and Suter, U. W., 2001, "Biodegradable Polymeric Materials," Encyclopedia of Materials: Science and Technology, Elsevier, Amsterdam, pp. 551-555.
57. Darney, P. D., Monroe, S. E., Klaisle, C. M., and Alvarado, A., 1989, "Clinical Evaluation of the Capronor Contraceptive Implant: Preliminary Report," Am. J. Obstet. Gynecol., 160(5 Pt 2), pp. 1292-1295.
58. Thomson, R. C., Wake, M. C., Yaszemski, M. J., and Mikos, A. G., 1995, "Biodegradable Polymer Scaffolds to Regenerate Organs," Advances in Polymer Science: Biopolymers 11, Springer-Verlag GmbH & Company KG, Berlin, Germany, Vol. 122, pp. 245-274.
59. DeVor, R. E., Chang, T., and Sutherland, J. W., 1992, Statistical Quality Design and Control: Contemporary Concepts and Methods. Prentice-Hall, Englewood Cliffs, NJ, pp. 543-605.