Handbook of PI and PID controller tuning rules, 2nd Edition

Handbook of PI and PID Controller Tuning Rules, 2nd Edition

Volumn , Issue , 2006, Pages 1-546

  O’Dwyer, Aidan ^a  

^a DUBLIN INSTITUTE OF TECHNOLOGY   (Ireland)

Author keywords

[No Author keywords available]

Indexed keywords

CONTROLLERS; ELECTRIC CONTROL EQUIPMENT; PROPORTIONAL CONTROL SYSTEMS; THREE TERM CONTROL SYSTEMS; TWO TERM CONTROL SYSTEMS;

AUTOMATIC CONTROLLERS; CONTROLLER ARCHITECTURES; INDUSTRIAL PROCESSS; PID CONTROLLER TUNING; PID CONTROLLERS; PROCESS MODELING; SINGLE VARIABLE; TUNING RULES;

PROCESS CONTROL;

EID: 84967472664     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/P424     Document Type: Book

References (440)

1. ABB (1996). Operating Guide for Commander 300/310, Section 7.
2. ABB (2001). Instruction manual for 53SL6000 [Online]. Document: PN24991. pdf. Available at www. abb. com [accessed 1 September 2004].
3. Abbas, A. (1997). A new set of controller tuning relations, ISA Transactions, 36, pp. 183-187.
4. Aikman, A. R. (1950). The frequency response approach to automatic control problems, Transactions of the Society of Instrument Technology, pp. 2-16.
5. Alvarez-Ramirez, J., Morales, A. and Cervantes, I. (1998). Robust proportional-integral control, Industrial Engineering Chemistry Research, 37, pp. 4740-4747.
6. Andersson, M. (2000). A MATLAB tool for rapid process identification and PID design, M. Sc. thesis, Department of Automatic Control, Lund Institute of Technology, Lund, Sweden.
7. Ang, K. H., Chong, G. and Li, Y. (2005). PID control system analysis, design and technology, IEEE Transactions on Control Systems Technology, 13(4), pp. 559-576.
8. Argelaguet, R., Pons, M., Quevedo, J. and Aguilar, J. (2000). A new tuning of PID controllers based on LQR optimization, Preprints of Proceedings of PID '00: IF AC Workshop on Digital Control, pp. 303-308.
9. Arvanitis, K. G., Akritidis, C. B., Pasgianos, G. D. and Sigrimis, N. A. (2000). Controller tuning for second order dead-time fertigation mixing process, Proceedings of EurAgEng Conference on Agricultural Engineering, Paper No. 00-AE-011.
10. th Mediterranean Conference on Control and Automation, Paper No. T7-040.
11. th Mediterranean Conference on Control and Automation, Paper No. T7-042.
12. Åström, K. J. (1982). Ziegler-Nichols auto-tuner, Department of Automatic Control, Lund Institute of Technology, Lund, Sweden, Report TFRT-3167.
13. Åström, K. J. and Hägglund, T. (1984). Automatic tuning of simple regulators with specifications on phase and amplitude margins, Automatica, 20, pp. 645-651.
14. Åström, K. J. and Hägglund, T. (1988). Automatic tuning of PID controllers (Instrument Society of America, Research Triangle Park, North Carolina, U. S. A.).
15. nd Edition).
16. Åström, K. J. and Hägglund, T. (1996) in The Control Handbook, Editor W. S. Levine, (CRC/IEEE Press), pp. 198-209.
17. Åström, K. J. and Hägglund, T. (2000). The future of PID control, Preprints of Proceedings of PID '00: IFAC Workshop on Digital Control, pp. 19-30.
18. Åström, K. J. and Hägglund, T. (2004). Revisiting the Ziegler-Nichols step response method for PID control, Journal of Process Control, 14, pp. 635-650.
19. Atkinson, P. and Davey, R. L. (1968). A theoretical approach to the tuning of pneumatic three-term controllers, Control, March, pp. 238-242.
20. Auslander, D. M., Takahashi, Y. and Tomizuka, M. (1975). The next generation of single loop controllers: hardware and algorithms for the discrete/decimal process controller, Transactions of the ASME: Journal of Dynamic Systems, Measurement and Control, September, pp. 280-282.
21. Bain, D. M. and Martin, G. D. (1983). Simple PID tuning and PID closed-loop simulation, Proceedings of the American Control Conference, pp. 338-342.
22. Bateson, N. (2002). Introduction to Control System Technology (Prentice-Hall Inc.).
23. Bekker, J. E., Meckl, P. H. and Hittle, D. C. (1991). A tuning method for first-order processes with PI controllers, ASHRAE Transactions, 97(2), pp. 19-23.
24. Belanger, P. W. and Luyben, W. L. (1997). Design of low-frequency compensators for improvement of plantwide regulatory performances, Industrial Engineering Chemistry Research, 36, pp. 5339-5347.
25. Bequette, B. W. (2003). Process Control: Modeling, Design and Simulation (Pearson Education, Inc.).
26. Bi, Q., Cai, W.-J., Lee, E.-L., Wang, Q.-G., Hang, C.-C. and Zhang, Y. (1999). Robust identification of first-order plus dead-time model from step response, Control Engineering Practice, 7, pp. 71-77.
27. Bi, Q., Cai, W.-J., Wang, Q.-G., Hang, C.-C., Lee, E.-L., Sun, Y., Liu, K.-D., Zhang, Y. and Zou, B. (2000). Advanced controller auto-tuning and its application in HVAC systems, Control Engineering Practice, 8, pp. 633-644.
28. Bialkowski, W. L. (1996) in The Control Handbook, Editor: W. S. Levine (CRC/IEEE Press), pp. 1219-1242.
29. Blickley, G. J. (1990). Modem control started with Ziegler-Nichols tuning, Control Engineering, 2 October, pp. 11-17.
30. Boe, E. and Chang, H.-C. (1988). Dynamics and tuning of systems with large delay, Proceedings of the American Control Conference, pp. 1572-1578.
31. Bohi, A. H. and McAvoy, T. J. (1976a). Linear feedback vs. time optimal control. I. The servo problem, Industrial Engineering Chemistry Process Design and Development, 15, pp. 24-30.
32. Bohl, A. H. and McAvoy, T. J. (1976b). Linear feedback vs. time optimal control. II. The regulator problem, Industrial Engineering Chemistry Process Design and Development, 15, pp. 30-33.
33. Borresen, B. A. and Grindal, A. (1990). Controllability-back to basics, ASHRAE Transactions-Research, pp. 817-819.
34. Brambilla, A., Chen, S. and Scali, C. (1990). Robust tuning of conventional controllers, Hydrocarbon Processing, November, pp. 53-58.
35. Branica, I., Petrovič, I and Perić, N. (2002). Toolkit for PID dominant pole design, Proceedings of the 9th IEEE Conference on Electronics, Circuits and Systems, 3, pp. 1247-1250.
36. Bryant, G. F., Iskenderoglu, E. F. and McClure, C. H. (1973). Design of controllers for time delay systems, in Automation of Tandem Mills, Editor: G. F. Bryant (The Iron and Steel Institute, London), pp. 81-106.
37. Buckley, P. S. (1964). Techniques in Process Control (John Wiley and Sons).
38. Bunzemeier, A. (1998). Ein vorschlag zur regelung integral wirkender prozesse mit eingangsstorung, Automatisierungstechnische Praxis, 40, pp. 26-35 (in German).
39. th Conference on Decision and Control (New Orleans, LA., U. S. A.), pp. 3209-3210.
40. Callendar, A., Hartree, D. R. and Porter, A. (1935/6). Time-lag in a control system, Philosophical Transactions of the Royal Society of London Series A, 235, pp. 415-444.
41. Camacho, O. E., Smith, C. and Chacón, E. (1997). Toward an implementation of sliding mode control to chemical processes, Proceedings of the IEEE International 'Symposium on Industrial Electronics (Guimarães, Portugal), 3, pp. 1101-1105.
42. Carr, D. (1986). AN-CNTL-13: PID control and controller tuning techniques [Online]. Available at http: //www. eurotherm. com/training/tutorial/mstrumentation/anl3 2. doc [accessed 3 September 2004]
43. Chandrashekar, R., Sree, R. P. and Chidambaram, M. (2002). Design of PI/PID controllers for unstable systems with time delay by synthesis method, Indian Chemical Engineer Section A, 44(2), pp. 82-88.
44. Chang, D.-M., Yu, C.-C. and Chien, I.-L. (1997). Identification and control of an overshoot lead-lag plant, Journal of the Chinese Institute of Chemical Engineers, 28, pp. 79-89.
45. Chao, Y.-C., Lin, H.-S., Guu, Y.-W. and Chang, Y.-H. (1989). Optimal tuning of a practical PID controller for second order processes with delay, Journal of the Chinese Institute of Chemical Engineers, 20, pp. 7-15.
46. Chau, P. C. (2002). Process control-a first course with MATLAB (Cambridge University Press).
47. Chen, C.-L. (1989). A simple method for on-line identification and controller tuning AIChE Journal, 35, pp. 2037-2039.
48. Chen, C.-L., Hsu, S.-H. and Huang, H.-P. (1999a). Tuning PI/PD controllers based on gain/phase margins and maximum closed loop magnitude, Journal of the Chinese Institute of Chemical Engineers, 30, pp. 23-29.
49. Chen, C.-L., Huang, H.-P. and Hsieh, C.-T. (1999b). Tuning of PI/PID controllers based on specification of maximum closed-loop amplitude ratio, Journal of Chemical Engineering of Japan, 32, pp. 783-788.
50. Chen, C.-L., Huang, H.-P. and Lo, H.-C. (1997). Tuning of PID controllers for selfregulating processes, Journal of the Chinese Institute of Chemical Engineers, 28, pp. 313-327.
51. Chen, C.-L. and Yang, S.-F. (2000). PI tuning based on peak amplitude ratio, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 195-198.
52. Chen, C.-L., Yang, S.-F. and Wang, T.-C. (2001). Tuning of the blending PID controllers based on specification of maximum closed-loop amplitude ratio, Journal of the Chinese Institute of Chemical Engineers, 32, pp. 565-570.
53. Chen, D. and Seborg, D. E. (2002). PI/PID controller design based on direct synthesis and disturbance rejection, Industrial Engineering Chemistry Research, 41, pp. 4807-4822.
54. Chen, G. (1996). Conventional and fuzzy PID controllers: an overview, International Journal of Intelligent Control and Systems, 1, pp. 235-246.
55. Cheng, G. S. and Hung, J. C. (1985). A least-squares based self-tuning of PID controller, Proceedings of the IEEE South East Conference (Raleigh, North Carolina, U. S. A.), pp. 325-332.
56. Cheng, Y.-C. and Yu, C.-C. (2000). Nonlinear process control using multiple models: relay feedback approach, Industrial Engineering Chemistry Research, 39, pp. 420-431.
57. Chesmond, C. J. (1982). Control System Technology (Edward Arnold).
58. Chidambaram, M. (1994). Design of PI controllers for integrator/dead-time processes, Hungarian Journal of Industrial Chemistry, 22, pp. 37-39.
59. Chidambaram, M. (1995a). Design formulae for PID controllers, Indian Chemical Engineer Section A, 37(3), pp. 90-94.
60. Chidambaram, M. (1995b). Design of PI and PID controllers for an unstable first-order plus time delay system, Hungarian Journal of Industrial Chemistry, 23, pp. 123-127.
61. Chidambaram, M. (1997). Control of unstable systems: a review, Journal of Energy, Heat and Mass Transfer, 19, pp. 49-56.
62. Chidambaram, M. (2000a). Set point weighted PI/PID controllers for stable systems, Chemical Engineering Communications, 179, pp. 1-13.
63. Chidambaram, M. (2000b). Set-point weighted PI/PID controllers for integrating plus dead-time processes, Proceedings of the National Symposium on Intelligent Measurement and Control (Chennai, India), pp. 324-331.
64. Chidambaram, M. (2000c). Set-point weighted PI/PID controllers for unstable first-order plus time delay systems, Proceedings of the International Conference onCommunications, Control and Signal Processing (Bangalore, India), pp. 173-177.
65. Chidambaram, M. and Kaylan, V. S. (1996). Robust control of unstable second order plus time delay systems, Proceedings of the International Conference on Advances in Chemical Engineering (ICAChE-96) (Chennai, India: Allied Publishers, New Delhi, India), pp. 277-280.
66. Chidambaram, M. and Sree, R. P. (2003). A simple method of tuning PID controllers for integrator/dead-time processes, Computers and Chemical Engineering, 27, pp. 211-215.
67. Chidambaram, M., Sree, R. P. and Srinivas, M. N. (2005). Reply to the comments by Dr. A. Abbas on "A simple method of tuning PID controllers for stable and unstable FOPTD systems" [Comp. Chem. Engineering V28 (2004) 2201-2218], Computers and Chemical Engineering, 29, pp. 1155.
68. Chien, I.-L. (1988). IMC-PID controller design-an extension, Proceedings of the IFAC Adaptive Control of Chemical Processes Conference (Copenhagen, Denmark), pp. 147-152.
69. Chien, I.-L. and Fruehauf, P. S. (1990). Consider IMC tuning to improve controller performance, Chemical Engineering Progress, October, pp. 33-41.
70. Chien, I.-L., Huang, H.-P. and Yang, J.-C. (1999). A simple multiloop tuning method for PID controllers with no proportional kick, Industrial Engineering Chemistry Research 38, pp. 1456-1468.
71. Chien, K. L., Hrones, J. A. and Reswick, J. B. (1952). On the automatic control of generalised passive systems, Transactions of the ASME, February, pp. 175-185.
72. Chiu, K. C., Corripio, A. B. and Smith, C. L. (1973). Digital controller algorithms. Part III. Tuning PI and PID controllers, Instruments and Control Systems, December, pp. 41-43.
73. Chun, D., Choi, J. Y. and Lee, J. (1999). Parallel compensation with a secondary measurement, Industrial Engineering Chemistry Research, 38, pp. 1575-1579.
74. Cluett, W. R. and Wang, L. (1997). New tuning rules for PID control, Pulp and Paper Canada, 3(6), pp. 52-55.
75. Cohen, G. H. and Coon, G. A. (1953). Theoretical considerations of retarded control, Transactions of the ASME, May, pp. 827-834.
76. Coon, G. A. (1956). How to find controller settings from process characteristics, Control Engineering, 3(May), pp. 66-76.
77. Coon, G. A. (1964). Control charts for proportional action, ISA Journal, 1 l(November), pp. 81-82.
78. Connell, B. (1996). Process instrumentation applications manual (McGraw-Hill).
79. ControlSoft Inc. (2005). PID loop tuning pocket guide (Version 2. 2, DS405-02/05) [Online]. Available at htto: //www. controlsoftinc. com [accessed 30 June 2005].
80. Corripio, A. B. (1990). Tuning of industrial control systems (Instrument Society of America, Research Triangle Park, North Carolina, U. S. A.).
81. Cox, C. S., Arden, W. J. B. and Doonan, A. F. (1994). CAD Software facilities tuning of traditional and predictive control strategies, Proceedings of the ISA Advances inInstrumentation and Control Conference (Anaheim, U. S. A.), 49(2), pp. 241-250.
82. Cox, C. S., Daniel, P. R. and Lowdon, A. (1997). Quicktune: a reliable automatic strategy for determining PI and PPI controller parameters using a FOLPD model, Control Engineering Practice, 5, pp. 1463-1472.
83. Davydov, N. I., Idzon, O. M. and Simonova, O. V. (1995). Determining the parameters of PID-controller settings using the transient response of the controlled plant, Thermal Engineering (Russia), 42, pp. 801-807.
84. De Oliveira, R., Corrêa, R. G. and Kwong, W. H. (1995). An IMC-PID tuning procedure based on the integral squared error (ISE) criterion: a guide tour to understand its features, Proceedings of the IF AC Workshop on Control Education and Technology Transfer Issues (Curitiba, Brazil), pp. 87-91.
85. De Paor, A. M. (1993). A fiftieth anniversary celebration of the Ziegler-Nichols PID controller, International Journal of Electrical Engineering Education, 30, pp. 303-316.
86. De Paor, A. M. and O' Malley, M. (1989). Controllers of Ziegler-Nichols type for unstable processes with time delay, International Journal of Control, 49, pp. 1273-1284.
87. Deshpande, P. B. (1980). Process identification of open-loop unstable systems, AIChE Journal, 26, pp. 305-308.
88. Devanathan, R. (1991). An analysis of minimum integrated error solution with application to self-tuning controller, Journal of Electrical and Electronics Engineering, Australia, 11, pp. 172-177.
89. Dutton, K., Thompson, S. and Barraclough, B. (1997). The art of control engineering (Addison-Wesley Longman).
90. ECOSSE Team (1996a). The ECOSSE Control Hypercourse [Online]. Available at http: //eweb. chemeng. ed. ac. uk/courses/control/course/map/controllers/correlations. html [accessed 24 May 2005].
91. ECOSSE Team (1996b). The ECOSSE Control Hypercourse [Online]. Available at http: //eweb. chemeng. ed. ac. uk/courses/control/course/map/controllers/damped. html [accessed 24 May 2005].
92. Edgar, T. F., Smith, C. L., Shinskey, F. G., Gassman, G. W., Schafbuch, P. J., McAvoy, T. J. and Seborg, D. E. (1997). Process Control, in Perrys Chemical Engineers Handbook (McGraw-Hill International Edition, Chemical Engineering Series), pp. 8-1 to 8-84.
93. Ender, D. B. (1993). Process control performance: not at good as you think, Control Engineering, September, pp. 180-190.
94. Ettaleb, L. and Roche, A. (2000). On-line tuning of mal-functioning control loops, Proceedings of Control Systems 2000 (Victoria, British Columbia, Canada), pp. 139-144.
95. EZYtune software package [Online]. Available at http: //www. unac. com. au/ezvtune [accessed 28 June 2003].
96. Farrington, G. H. (1950). Communications on "The practical application of frequency response analysis to automatic process control," Proceedings of the Institution of Mechanical Engineers (London), 162, pp. 346-347.
97. Feeney, M. and O'Dwyer, A. (2002). Towards an expert system approach for PI controller design of delayed processes, Proceedings of the Irish Signals and Systems Conference (University College Cork, Ireland), pp. 175-180.
98. Ferretti, G., Maffezzoni, C. and Scattolini, R. (1991). Recursive estimation of time delay in sampled systems, Automatica, 27, pp. 653-661.
99. Fertik, H. A. (1975). Tuning controllers for noisy processes, ISA Transactions, 14, pp. 292-304.
100. Fertik, H. A. and Sharpe, R. (1979). Optimizing the computer control of breakpoint chlorination, Advances in Instrumentation: Proceedings of the ISA Conference and Exhibit (Chicago, U. S. A.), 34(1), pp. 373-386.
101. Ford, R. L. (1953). The determination of the optimum process-controller settings and their confirmation by means of an electronic simulator, Proceedings of the IEE Part 2, 101 (April), pp. 141-155 and pp. 173-177.
102. Foxboro (1994). I/A/Series EXACT Multivariable Control Product Specifications (PSS 21S-3A2 B3, Foxboro Company, U. S. A.).
103. Frank, P. M. and Lenz, R. (1969). Entwurf erweiterter PI-regler fìir totzeitstrecken mit verzögerung erster ordnung, Elektrotechnische Zeitschrift ETZ A, 90(3), pp. 57-63 (in German).
104. Friman, M. and Waller, K. V. (1997). A two channel relay for autotuning, Industrial Engineering Chemistry Research, 36, pp. 2662-2671.
105. Fruehauf, P. S., Chien, I.-L. and Lauritsen, M. D. (1993). Simplified IMC-PID tuning rules, Proceedings of ISA/93 Advances in Instrumentation and Control Conference (Chicago, U. S. A.), 48, pp. 1745-1766.
106. Gaikward, R. and Chidambaram, M. (2000). Design of PID controllers for unstable systems, Proceedings of the National Symposium on Intelligent Measurement and Control (Chennai, India), pp. 332-339.
107. Gallier, P. W. and Otto, R. E. (1968). Self-tuning computer adapts DDC algorithms, Instrumentation Technology, February, pp. 65-70.
108. García, R. F. and Castelo, F. J. P. (2000). A complement to autotuning methods on PID controllers, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 101-104.
109. nd IEEE Conference on Control Applications (Vancouver, B. C., Canada), pp. 819-824.
110. Gerry, J. P. (1998). How to control processes with large dead times [Online]. Available at http: //www. expertune. com/artdt. html [accessed 27 June 2005]
111. Gerry, J. P. (1999). Tuning process controllers starts in manual [Online]. Available at http: //www. expertune. com/ArtlnTechMav99. html [accessed 27 June 2005].
112. Gerry, J. P. (2003). How to control a process with long dead time [Online]. Available at http: //www. expertune. com/leamcast. html [accessed 27 June 2005].
113. Gerry, J. P. and Hansen, P. D. (1987). Choosing the right controller, Chemical Engineering, May 25, pp. 65-68.
114. Gong, X., Gao, J. and Zhou, C. (1996). Extension of IMC tuning to improve controller performance, Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, pp. 1770-1775.
115. Goodwin, G. C., Graebe, S. F. and Salgado, M. E. (2001). Control system design (Prentice Hall).
116. Górecki, H., Fuska, S., Grabowski, P. and Korytowski, A. (1989). Analysis and synthesis of time delay systems (John Wiley and Sons, New York).
117. Gorez, R. (2003). New design relations for 2-DOF PID-like control systems, Automatica, 39, pp. 901-908.
118. Gorez, R. and Klàn, P. (2000). Nonmodel-based explicit design relations for PID controllers, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 141-148.
119. Haalman, A. (1965). Adjusting controllers for a deadtime process, Control Engineering, July, pp. 71-73.
120. Haeri, M. (2002). Tuning rules for the PID controller using a DMC strategy, Asian Journal of Control, 4, pp. 410-417.
121. Haeri, M. (2005). PI design based on DMC strategy, Transactions of Institute of Measurement and Control, 27, pp. 21-36.
122. Hägglund, T. and Åström, K. J. (1991). Industrial adaptive controllers based on frequency response techniques, Automatica, 27, pp. 599-609.
123. Hägglund, T. and Åström, K. J. (2002). Revisiting the Ziegler-Nichols tuning rules for PI control, Asian Journal of Control, 4, pp. 364-380.
124. Hang, C. C. and Åström, K. J. (1988a). Refinements of the Ziegler-Nichols tuning formuale for PID auto-tuners, Proceedings of the ISA/88 International Conference and Exhibition. Advances in Instrumentation, 43, pp. 1021-1030.
125. Hang, C. C. and Åström, K. J. (1988b). Practical aspects of PID auto-tuners based on relay feedback, Proceedings of the IFAC Adaptive control of Chemical Processes Conference, (Copenhagen, Denmark), pp. 153-158.
126. Hang, C. C., Åström, K. J. and Ho, W. K. (1991). Refinements of the Ziegler-Nichols tuning formula, IEE Proceedings, Part D, 138, pp. 111-118.
127. Hang, C. C. and Cao, L. (1996). Improvement of transient response by means of variable set-point weighting, IEEE Transactions on Industrial Electronics, 43, pp. 477-484.
128. Hang, C. C., Ho, W. K. and Cao, L. S. (1993a). A comparison of two design methods for PID controllers, Proceedings of the ISA/93 Advances in Instrumentation and Control Conference (Chicago, U. S. A.), 48, pp. 959-967.
129. Hang, C. C., Ho, W. H. and Cao, L. S. (1994). A comparison of two design methods for PID controllers, ISA Transactions, 33, pp. 147-151.
130. Hang, C. C., Lee, T. H. and Ho, W. K. (1993b). Adaptive Control (Instrument Society of America, Research Triangle Park, North Carolina, U. S. A.).
131. Hansen, P. D. (1998). Controller structure and tuning for unmeasured load disturbance, Proceedings of the American Control Conference (Philadelphia, Pennsylvania, U. S. A.), 1, pp. 131-136.
132. Hansen, P. D. (2000). Robust adaptive PID controller tuning for unmeasured load rejection, Preprints of Proceedings of PID '00: IF AC Workshop on digital control, (Terrassa, Spain), pp. 487-494.
133. Harriott, P. (1964). Process Control (McGraw-Hill, New York).
134. Harris, T. J. and Tyreus, B. D. (1987). Comments on Internal Model Control. 4. PID controller design, Industrial Engineering Chemistry Research, 26, pp. 2161-2162.
135. Harrold, D. (1999). Process controller tuning guidelines [Online]. Available at http: //www. manufacturing. net/ctl/index. asp?lavout=articlePrint&articleID=CAl 88338 [accessed 2 May 2003].
136. Hartree, D. R., Porter, A., Callender, A. and Stevenson, A. B. (1937). Time-lag in a control system-II, Proceedings of the Royal Society of London, 161(A), pp. 460-476.
137. Hassan, G. A. (1993). Computer-aided tuning of analog and digital controllers, Control and Computers, 21(1), pp. 1-6.
138. Hay, J. (1998). Regeltechniek 1 (Die Keure n. v., Brugge, Belgium; in Flemish).
139. Hazebroek, P. and Van der Waerden, B. L. (1950). The optimum tuning of regulators, Transactions of the ASME, April, pp. 317-322.
140. Heck, E. (1969). Stetige regler an regelstrecken-bestehend aus verzögerungsgliedem erster ordnung, Heizung-Lüeftung-Haustechnik, 20(9), September, pp. 333-337 (in German).
141. Henry, J. and Schaedel, H. M. (2005). International co-operation in control engineering education using online experiments, European Journal of Engineering Education, 30(2), pp. 265-274.
142. Hiroi, K. and Terauchi, Y. (1986). Two degrees of freedom algorithm, Proceedings of the ISA/86 International Conference and Exhibition. Advances in Instrumentation, pp. 789-796.
143. Ho, W. K., Gan, O. P., Tay, E. B. and Ang, E. L. (1996). Performance and gain and phase margins of well-known PID tuning formulas, IEEE Transactions on Control Systems Technology, 4, pp. 473-477.
144. Ho, W. K., Hang, C. C. and Cao, L. S. (1995a). Tuning of PID controllers based on gain and phase margin specifications, Automatica, 31, pp. 497-502.
145. Ho, W. K., Hang, C. C. and Zhou, J. H. (1995b). Performance and gain and phase margins of well-known PI tuning formulas, IEEE Transactions on Control Systems Technology, 3, pp. 245-248.
146. Ho, W. K., Hang, C. C. and Zhou, J. (1997). Self-tuning PID control of a plant with underdamped response with specifications on gain and phase margins, IEEE Transactions on Control Systems Technology, 5, pp. 446-452.
147. Ho, W. K., Hang, C. C., Zhou, J. H. and Yip, C. K. (1994). Adaptive PID control of a process with underdamped response, Proceedings of the Asian Control Conference (Tokyo, Japan), pp. 335-338.
148. Ho, W. K., Lee, T. H., Han, H. P. and Hong, Y. (2001). Self-tuning IMC-PID control with interval gain and phase margins assignment, IEEE Transactions on Control Systems Technology, 9, pp. 535-541.
149. Ho, W. K., Lim, K. W., Hang, C. C. and Ni, L. Y. (1999). Getting more phase margin and performance out of PID controllers, Automatica, 35, pp. 1579-1585.
150. Ho, W. K., Lim, K. W. and Xu, W. (1998). Optimal gain and phase margin tuning for PID controllers, Automatica, 34, pp. 1009-1014.
151. Ho, W. K. and Xu, W. (1998). PID tuning for unstable processes based on gain and phase-margin specifications, IEE Proceedings-Control Theory and Applications, 145, pp. 392-396.
152. Horn, I. G., Arulandu, J. R., Gombas, C. J., VanAntwerp, J. G. and Braatz, R. D. (1996). Improved filter design in internal model control, Industrial Engineering Chemistry Research, 35, pp. 3437-3441.
153. Hougen, J. O. (1979). Measurement and Control Applications (Instrument Society of America, Research Triangle Park, North Carolina, U. S. A.).
154. Hougen, J. O. (1988). A software program for process controller parameter selection, Proceedings of the ISA/88 International Conference and Exhibition. Advances in Instrumentation, 43(1), pp. 441-456.
155. Huang, C.-T. (2002). Private communication to Mr. T. Kealy, DIT.
156. Huang, C.-T., Chou, C.-J. and Wang, J.-L. (1996). Tuning of PID controllers based on the second order model by calculation, Journal of the Chinese Institute of Chemical Engineers, 27, pp. 107-120.
157. Huang, C.-T. and Lin, Y.-S. (1995). Tuning PID controller for open-loop unstable processes with time delay, Chemical Engineering Communications, 133, pp. 11-30.
158. Huang, H.-P. and Chao, Y.-C. (1982). Optimal tuning of a practical digital PID controller, Chemical Engineering Communications, 18, pp. 51-61.
159. Huang, H.-P. and Chen C.-C. (1997). Control-system synthesis for open-loop unstable process with time delay, IEE Proceedings-Control Theory and Applications, 144, pp. 334-346.
160. Huang, H.-P. and Chen, C.-C. (1999). Auto-tuning of PID controllers for second-order unstable process having dead time, Journal of Chemical Engineering of Japan, 32, pp. 486-497.
161. Huang, H.-P., Chien, I.-L., Lee, Y.-C. and Wang, G.-B. (1998). A simple method for tuning cascade control systems, Chemical Engineering Communications, 165, pp. 89-121.
162. Huang, H.-P. and Jeng, J.-C. (2002). Monitoring and assessment of control performance for single loop systems, Industrial Engineering Chemistry Research, 41, pp. 1297-1309.
163. Huang, H.-P. and Jeng, J.-C. (2003). Identification for monitoring and autotuning of PID controllers, Journal of Chemical Engineering of Japan, 36, pp. 284-296.
164. Huang, H.-P., Jeng, J.-C. and Luo, K.-Y. (2005). Auto-tune system using single-run relay feedback test and model-based controller design, Journal of Process Control, 15, pp. 713-727.
165. Huang, H.-P., Lee, M.-W. and Chen, C.-L. (2000). Inverse-based design for a modified PID controller, Journal of the Chinese Institute of Chemical Engineers, 31, pp. 225-236.
166. Huang, H.-P., Roan, M.-L. and Jeng, J.-C. (2002). On-line adaptive tuning for PID controllers, IEE Proceedings-Control Theory and Applications, 149, pp. 60-67.
167. Huba, M. and Žáková, K. (2003). Contribution to the theoretical analysis of the Ziegler-Nichols method, Journal of Electrical Engineering, Slovakia, 54(7-8), pp. 188-194.
168. Hwang, S.-H. (1993). Adaptive dominant pole design of PID controllers based on a single closed-loop test, Chemical Engineering Communications, 124, pp. 131-152.
169. Hwang, S.-H. (1995). Closed-loop automatic tuning of single-input-single-output systems, Industrial Engineering Chemistry Research, 34, pp. 2406-2417.
170. Hwang, S.-H. and Chang, H.-C. (1987). A theoretical examination of closed-loop properties and tuning methods of single-loop PI controllers, Chemical Engineering Science, 42, pp. 2395-2415.
171. Hwang, S.-H. and Fang, S.-M. (1995). Closed-loop tuning method based on dominant pole placement, Chemical Engineering Communications, 136, pp. 45-66.
172. Isaksson, A. J. and Graebe, S. F. (1999). Analytical PID parameter expressions for higher order systems, Automatica, 35, pp. 1121-1130.
173. Isermann, R. (1989). Digital Control Systems Volume 1. Fundamentals, Deterministic Control (2nd Revised Edition, Springer-Verlag).
174. ISMC (1999). RAPID: Robust Advanced PID Control Manual (Intelligent System Modeling and Control nv, Belgium).
175. Jahanmiri, A. and Fallahi, H. R. (1997). New methods for process identification and design of feedback controller, Transactions of the Institute of Chemical Engineers, 75(A), pp. 519-522.
176. Jhunjhunwala, M. and Chidambaram, M. (2001). PID controller tuning for unstable systems by optimization method, Chemical Engineering Communications, 185, pp. 91-113.
177. Jones, K. O., Williams, D. and Montgomery, P. A. (1997). On-line application of an autotuning PID controller for dissolved oxygen concentration in a fermentation process, Transactions of the Institute of Measurement and Control, 19, pp. 253-262.
178. Juang, W.-S. and Wang, F.-S. (1995). Design of PID controller by concept of Dahlin's Law, Journal of the Chinese Institute of Chemical Engineers, 26, pp. 133-136.
179. Kamimura, K., Yamada, A., Matsuba, T., Kimbara, A., Kurosu, S. and Kasahara, M. (1994). CAT (Computer-aided tuning) software for PID controllers, ASHRAE Transactions: Research, 100(1), pp. 180-190.
180. Karaboga, D. and Kalinli, A. (1996). Tuning PID controller parameters using Tabu search algorithm, Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, pp. 134-136.
181. Kasahara, M., Matsuba, T., Kuzuu, Y., Yamazaki, T., Hashimoto, Y., Kamimura, K. and Kurosu, S. (1999). Design and tuning of robust PID controller for HVAC systems, ASHRAE Transactions: Research, 105(2), pp. 154-166.
182. Kasahara, M., Yamazaki, T., Kuzuu, Y., Hashimoto, Y., Kamimura, K., Matsuba, T. and Kurosu, S. (2001). Stability analysis and tuning of PID controller in VAV systems, ASHRAE Transactions: Research, 107, pp. 285-296, 2001.
183. Kasahara, M., Matsuba, T., Murasawa, I., Hashimoto, Y., Kamimura, K., Kimbara, A. and Kurosu, S. (1997). A tuning method of two degrees of freedom PID controller, ASHRAE Transactions: Research, 103, pp. 278-289.
184. Kaya, A. and Scheib, T. J. (1988). Tuning of PID controls of different structures, Control Engineering, July, pp. 62-65.
185. Kaya, I. (2003). A PI-PD controller design for control of unstable and integrating processes, 14 Transactions, 42, pp. 111-121.
186. Kaya, I. and Atherton, D. P. (1999). A PI-PD controller design for integrating processes, Proceedings of the American Control Conference (San Diego, U. S. A.), pp. 258-262.
187. Kaya, I., Tan, N. and Atherton, D. P. (2003). A simple procedure for improving performance of PID controllers, Proceedings of the IEEE Conference on Control Applications (U. S. A.), pp. 882-885.
188. Keane, M. A., Yu, J. and Koza, J. R. (2003). Automatic synthesis of both the topology and tuning of a common parameterized controller for two families of plants using genetic programming, Proceedings of the Genetic and Evolutionary Computation Conference (Las Vegas, Nevada, U. S. A.), pp. 496-504.
189. Keviczky, L. and Csáki, F. (1973). Design of control systems with dead time in the time domain, Acta Technica Academiae Scientiarum Hungaricae, 74(1-2), pp. 63-84.
190. Khan, B. Z. and Lehman, B. (1996). Setpoint PI controllers for systems with large normalised dead time, IEEE Transactions on Control Systems Technology, 4, pp. 459-466.
191. Khodabakhshian, A. and Golbon, N. (2004). Unified PID design for load frequency control, Proceedings of the IEEE International Conference on Control Applications (Taipei, Taiwan), pp. 1627-1632.
192. Kim, I.-H., Fok, S., Fregene, K., Lee, D.-H., Oh, T.-S. and Wang, D. W. L. (2004). Neural-network bases system identification and controller synthesis for an industrial sewing machine, International Journal of Control, Automation and Systems, 2(1), pp. 83-91.
193. Kinney, T. B. (1983). Tuning process controllers, Chemical Engineering, September 19, pp. 67-72.
194. Klein, M., Walter, H. and Pandit, M. (1992). Digitaler PI-regler: neue einstellregeln mit hilfe der streckensprungantwort (Digital PI-control: new tuning rules based on step response identification), at-Automatisierungstechnik, 40(8), pp. 291-299 (in German).
195. Koivo, H. N. and Tanttu, J. T. (1991). Tuning of PID controllers: survey of SISO and MIMO techniques, Proceedings of the IFAC Intelligent Tuning and Adaptive Control Symposium (Singapore), pp. 75-80.
196. Kookos, I. K., Lygeros, A. I. and Arvanitis, K. G. (1999). On-line PI controller tuning for integrator/dead time processes, European Journal of Control, 5, pp. 19-31.
197. Kraus, T. W., Pattern-recognizing self-tuning controller, U. S. Patent Number 4, 602, 326 (1986).
198. Rristiansson, B. (2003). PID controllers design and evaluation, Ph. D. thesis, Chalmers University of Technology, Sweden.
199. Kristiansson, B. and Lennartson, B. (1998a). Robust design of PID controllers including auto-tuning rules, Proceedings of the American Control Conference, 5, pp. 3131-3132.
200. Kristiansson, B. and Lennartson, B. (1998b). Optimal PID controllers for unstable and resonant plants, Proceedings of the Conference on Decision and Control (Tampa, Florida, U. S. A.), pp. 4380-4381.
201. Kristiansson, B. and Lennartson, B. (2000). Near optimal tuning rules for PI and PID controllers, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 369-374.
202. Kristiansson, B. and Lennartson, B. (2002). Robust and optimal tuning of PI and PID controllers, IEE Proceedings-Control Theory and Applications, 149, pp. 17-25.
203. th IEEE Conference on Decision and Control (Sydney, Australia), pp. 2740-2745.
204. Kuhn, U. (1995). Ein praxisnahe einstellregel fur PID-regler: die T-summen-regel, atp-Automatisierungstechnische Praxis, 37(5), pp. 10-16 (in German).
205. Kwak, H. J., Sung, S. W. and Lee, I.-B. (2000). Stabilizability conditions and controller design for unstable processes, Transactions of the Institute of Chemical Engineers, 78(A), pp. 549-556.
206. Landau, I. D. and Voda, A. (1992). An analytical method for the auto-calibration of PID controllers, Proceedings of the 31st Conference on Decision and Control (Tucson, Arizona, U. S. A.), pp. 3237-3242.
207. Lee, J. and Edgar, T. F. (2002). Improved PI controller with delayed or filtered integral mode, AIChE Journal, 48, pp. 2844-2850.
208. Lee, J. and Sung, S. W. (1993). Comparison of two identification methods for PID controller tuning, AIChE Journal, 39, pp. 695-697.
209. Lee, W. S. and Shi, J. (2002). Modified IMC-PID controllers and generalised PID controllers for first-order plus dead-time processes, Proceedings of the Seventh International Conference on Control, Automation, Robotics and Vision (Singapore), pp. 898-903.
210. Lee, Y., Lee, J. and Park, S. (2000). PID tuning for integrating and unstable processes with time delay, Chemical Engineering Science, 55, pp. 3481-3493.
211. Lee, Y., Park, S., Lee, M. and Brosilow, C. (1998). PID controller tuning to obtain desired closed-loop responses for SI/SO systems, AIChE Journal, 44, pp. 106-115.
212. Lelic, M. and Gajic, Z. (2000). A reference guide to PID controllers in the nineties, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 73-82.
213. h IEEE Conference on Decision and Control, (San Diego, California, U. S. A.), pp. 2666-2671.
214. Leonard, F. (1994). Optimum P1DS controllers, an alternative for unstable delayed systems, Proceedings of the IEEE Conference on Control Applications (Glasgow, U. K.), pp. 1207-1210.
215. Leva, A. (1993). PID autotuning algorithm based on relay feedback, IEE Proceedings, Part D, 140, pp. 328-338.
216. Leva, A. (2001). Model-based tuning: the very basics and some useful techniques, Journal A: Benelux quarterly journal on Automatic Control, 42(3).
217. Leva, A. (2005). Model-based proportional-integral-derivative autotuning improved with relay feedback identification, IEE Proceedings-Control Theory and Applications, 152, pp. 247-256.
218. Leva, A. and Colombo, A. M. (2000). Estimating model mismatch overbounds for the robust autotuning of industrial regulators, Automatica, 26, pp. 1855-1861.
219. Leva, A. and Colombo, A. M. (2001). Implementation of a robust PID autotuner in a control design environment, Transactions of the Institute of Measurement and Control, 23, pp. 1-20.
220. Leva, A. and Colombo, A. M. (2004). On the IMC-based synthesis of the feedback block of ISA-PID regulators, Transactions of the Institute of Measurement and Control, 26, pp. 417-440.
221. Leva, A., Cox, C. and Ruano, A. (2003). IFAC Professional Brief-Hands-on PID autotuning: a guide to better utilization [Online]. Available at http: //www. ifac-control. org/publications/pbriefs/PB Final LevaCoxRuano. pdf [Accessed 28 June 2005]
222. Leva, A., Maffezzoni, C. and Scattolini, R. (1994). Self-tuning PI-PID regulators for stable systems with varying delay, Automatica, 30, pp. 1171-1183.
223. Li, Y.-N., Zhang, W.-D. and Liu, T. (2004). New design method of PID controller for inverse response processes with time delay, Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 38(4), pp. 506-509 (in Chinese).
224. Li, Z., Su., X. and Lin, P. (1994). A practical algorithm for PID auto-tuning, Advances in Modelling and Analysis C (ASME Press), 40(2), pp. 17-27.
225. Lim, C. M., Tan, W. C. and Lee, T. S. (1985). Tuning of PID controllers for first and second-order lag processes with dead time, International Journal of Electrical Engineering Education, 22, pp. 345-353.
226. Lipták, B. (1970, Editor), Instrument Engineers Handbook Volume II: Process Control (Chilton Book Co., Philadelphia, U. S. A.)
227. Lipták, B. (2001). Controller tuning II: Problems and Methods [Online]. Available at http: //www. controlmagazine. com [accessed 21 November 2003].
228. nd IEEE Conference on Decision and Control (Maui, Hawaii, U. S. A.), pp. 6044-6049.
229. Lloyd, S. G. (1994). Tuning arrangements for turning the control parameters of a controller, U. S. Patent Number 5, 283, 729.
230. Lopez, A. M., Smith, C. L. and Murrill, P. W. (1969). An advanced tuning method, British Chemical Engineering, 14, pp. 1553-1555.
231. Loron, L. (1997). Tuning of PID controllers by the non-symmetrical optimum method, Automatica, 33, pp. 103-107.
232. Luo, K.-N., Kuo, C.-Y. and Sheu, L.-T. (1996). A novel method for fuzzy self-tuning PID controllers, Proceedings of the Asian Fuzzy Systems Symposium, pp. 194-199.
233. Luyben, W. L. (1996). Tuning proportional-integral-derivative controllers for integrator/deadtime processes, Industrial Engineering Chemistry Research, 35, pp. 3480-3483.
234. Luyben, W. L. (1998). Tuning temperature controllers on openloop unstable reactors, Industrial Engineering Chemistry Research, 37, pp. 4322-4331.
235. Luyben, W. L. (2000). Tuning proportional-integral controllers for processes with both inverse response and deadtime, Industrial Engineering Chemistry Research, 39, pp. 973-976.
236. Luyben, W. L. (2001). Effect of derivative algorithm and tuning selection on the PID control of dead-time processes, Industrial Engineering Chemistry Research, 40, pp. 3605-3611.
237. Luyben, W. L. and Luyben, M. L. (1997). Essentials of process control (McGraw-Hill International Edition, Singapore).
238. MacLennan, G. D. S. (1950). Communications on "The practical application of frequency response analysis to automatic process control," Proceedings of the Institution of Mechanical Engineers (London), 162, pp. 347-348.
239. Maffezzoni, C. and Rocco, P. (1997), Robust tuning of PID regulators based on step-response identification, European Journal of Control, 3, pp. 125-136.
240. Majhi, S. and Atherton, D. P. (2000). Online tuning of controllers for an unstable FOPDT process, IEE Proceedings-Control Theory and Applications, 147, pp. 421-427.
241. Majhi, S. and Litz, L. (2003). On-line tuning of PID controllers, Proceedings of the American Control Conference (Denver, Colorado, U. S. A.), pp. 5003-5004.
242. Majhi, S. and Mahanta, C. (2001). Tuning of controllers for integrating time delay processes, Proceedings of the IEEE Region 10 Int. Conference on Electrical and Electronic Technology (TENCON 2001), 1, pp. 317-320.
243. Mann, G. K. I., Hu, B.-G. and Gosine, R. G. (2001). Time-domain based design and analysis of new PID tuning rules, IEE Proceedings-Control Theory and Applications, 148, pp. 251-261.
244. Mantz, R. J. and Tacconi, E. J. (1989). Complementary rules to Ziegler and Nichols' rules for a regulating and tracking controller, International Journal of Control, 49, pp. 1465-1471.
245. Marchetti, G. and Scali, C. (2000). Use of modified relay techniques for the design of model-based controllers for chemical processes, Industrial Engineering Chemistry Research, 39, pp. 3325-3334.
246. Marlin, T. E. (1995). Process Control (Mc-Graw Hill Inc., New York).
247. Mataušek, M. R. and Kvašŏev, G. S. (2003), A unified step response procedure for autotuning of PI controller and Smith predictor for stable processes, Journal of Process Control, 13, pp. 787-800.
248. Matsuba, T., Kasahara, M., Murasawa, I., Hashimoto, Y., Kamimura, K., Kimbara, A. and Kurosu, S. (1998). Stability limit of room air temperature of a VAV system, ASHRAE Transactions, 104(2), pp. 257-265.
249. McAnany, D. E. (1993). A pole placement technique for optimum PID control parameters, Proceedings of the ISA Advances in Instrumentation and Control Conference (Chicago, U. S. A.), 48, pp. 1775-1782.
250. McAvoy, T. J. and Johnson, E. F. (1967). Quality of control problem for dead-time plants, Industrial and Engineering Chemistry Process Design and Development, 6, pp. 440-446.
251. McMillan, G. K. (1984). Control loop performance, Proceedings of the ISA/84 International Conference and Exhibition (Houston, Texas, U. S. A.), 39, pp. 589-603.
252. rd Edition).
253. st lag mean (super 2dof PID algorithm), Proceedings of the ISA Advances in Instrumentation and Control, 46(2), pp. 1125-1132.
254. Mollenkamp, R. A., Smith, C. L. and Corripio, A. B. (1973). Using models to tune industrial controllers, Instruments and Control Systems, September, pp. 46-47.
255. Morari, M. and Zafiriou, E. (1989). Robust process control (Prentice-Hall Inc., Englewood Cliffs, New Jersey, U. S. A.).
256. Morilla, F., González, A. and Duro, N. (2000). Auto-tuning PID controllers in terms of relative damping, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 161-166.
257. Moros, R. (1999). Strecke mit Ausgleich höherer Ordung [Online], Available at httD: //techni. tachemie. uni-leiDzig. de/reg/regeintn. html [accessed 28 January 2005] (in German).
258. Murrill, P. W. (1967). Automatic control of processes (International Textbook Co.).
259. NI Labview (2001). PID control toolkit user manual [Online], Available at http: //www. ni. com/odf/manuals/322192a. pdf Taccessed 3 September 2004]
260. Nishikawa, Y., Sannomiya, N., Ohta, T. and Tanaka, H. (1984). A method for autotuning of PID control parameters, Automatica, 20, pp. 321-332.
261. Normey-Rico, J. E., Alcalá, I., Gómez-Ortega, J. and Camacho, E. F. (2000). Robust PID tuning application to a mobile robot path tracking problem, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 648-653.
262. Normey-Rico, J. E., Alcalá, I., Gómez-Ortega, J. and Camacho, E. F. (2001). Mobile robot path tracking using a robust PID controller, Control Engineering Practice, 9, pp. 1209-1214.
263. O'Connor, G. E. and Denn, M. M. (1972). Three mode control as an optimal control, Chemical Engineering Science, 27, pp. 121-127.
264. O'Dwyer, A. (1998). Performance and robustness in the compensation of FOLPD processes with PI and PID controllers, Proceedings of the Irish Signals and Systems Conference (Dublin Institute of Technology, Ireland), pp. 227-234.
265. O'Dwyer, A. (2000). Performance and robustness of PI and PID tuning rules, Technical Report AOD-OO-12 (Dublin Institute of Technology, Ireland).
266. O'Dwyer, A. (2001a). PI and PID controller tuning rule design for processes with delay, to achieve constant gain and phase margins for all values of delay, Proceedings of the Irish Signals and Systems Conference (N. U. I. Maynooth, Ireland), pp. 96-100.
267. O'Dwyer, A. (2001b). Series PID controller tuning rules, Technical Report AOD-Ol-13 (Dublin Institute of Technology, Ireland).
268. Ogawa, M. and Katayama, T. (2001). A robust tuning method for I-PD controller incorporating a constraint on manipulated variable, Transactions of the Society of Instrument and Control Engineers, Japan, E-l(1), pp. 265-273.
269. th IEEE Conference on Control Applications, pp. 101-106.
270. Oppelt, W. (1951). Einige Faustformeln zur Einstellung von Regelvorgängen, Chemie Ingenieur Technik, 23(8), pp. 190-193 (in German).
271. Ou, W.-H. and Chen, Y.-W. (1995). Adaptive actual PID control with an adjustable identification interval, Chemical Engineering Communications, 134, pp. 93-105.
272. Oubrahim, R. and Leonard, F. (1998). PID tuning by a composed structure, Proceedings of the UKACC International Conference on Control (Swansea, Wales, U. K.), 2, pp. 1333-1338.
273. Ozawa, K., Noda, Y., Yamazaki, T., Kamimura, K. and Kurosu, S. (2003). A tuning method for PID controller using optimisation subject to constraints on control input, ASHRAE Transactions: Research, 109, pp. 79-88.
274. Panda, R. C., Yu, C.-C. and Huang, H.-P. (2004). PID tuning rules for SOPDT systems: review and some new results, ISA Transactions, 43, pp. 283-295.
275. Paraskevopoulos, P. N., Pasgianos, G. D. and Arvanitis, K. G. (2004). New tuning and identification methods for unstable first order plus dead-time processes based on pseudoderivative feedback control, IEEE Transactions on Control Systems Technology, 12, pp. 455-464.
276. Park, J. H., Sung, S. W. and Lee, I.-B. (1998). An enhanced PID control strategy for unstable processes, Automatica, 34, pp. 751-756.
277. Parr, E. A. (1989). Industrial Control Handbook, Vol. 3 (BSP Professional Books, Oxford, U. K.).
278. Pecharromán, R. R. (2000). Private communication (9 May).
279. th European Control Conference (Karlsruhe, Germany), Paper F453.
280. Pecharromán, R. R. and Pagola, F. L. (2000). Control design for PID controllers autotuning based on improved identification, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 89-94.
281. Pemberton, T. J. (1972a). PID: The logical control algorithm, Control Engineering, 19(5), pp. 66-67.
282. Pemberton, T. J. (1972b). PID: The logical control algorithm II, Control Engineering, 19(7), pp. 61-63.
283. Peng, H. and Wu, S.-C. (2000). Journal of Cent. South Univ. Technol., (China), 7, pp. 165-169.
284. Penner, A. (1988). Tuning rules for a PI controller, Proceedings of the ISA International Conference and Exhibition (Houston, Texas, U. S. A.), 43(3), pp. 1037-1051.
285. Perić, N., Petrović, I. and Branica, I. (1997). A method of PID controller autotuning, Proceedings of the IFAC Conference on Control of Industrial Systems (Belfort, France), pp. 597-602.
286. Pessen, D. W. (1953). Optimum three-mode controller settings for automatic start-up, Transactions of the ASME, July, pp. 843-849.
287. Pessen, D. W. (1954). How to "tune in" a three-mode controller, Instrumentation, 7(3), pp. 29-32.
288. Pessen, D. W. (1994). A new look at PID-controller tuning, Transactions of the ASME. Journal of Dynamic Systems, Measurement and Control, 116, pp. 553-557.
289. Pettit, J. W. and Carr, D. M. (1987). Self-tuning controller, US Patent No. 4, 669, 040.
290. Pinnella, M. J., Wechselberger, E., Hittle, D. C. and Pedersen, C. O. (1986). Self-tuning digital integral control, ASHRAE Transactions, 92(2B), pp. 202-209.
291. Polonyi, M. J. G. (1989). PID controller tuning using standard form optimization, Control Engineering, March, pp. 102-106.
292. Pomerleau, A. and Poulin, E. (2004). Manipulated variable based PI tuning and detection of poor settings: an industrial experience, ISA Transactions, 43, pp. 445-457.
293. Potočnik, B., Škrjanc, I., Matko, D. and Zupančič, B. (2001). Samonastavljivi PI regulator na podlagi metode z relejskim preskusom, Elektrotehniški vestnik (Electrotechnical Review) Ljubljana Slovenija, 68, pp. 115-122 (in Slovenian).
294. Poulin, E., Pomerleau, A. Desbiens, A. and Hodouin, D. (1996). Development and evaluation of an auto-tuning and adaptive PID controller, Automatica, 32, pp. 71-82.
295. Poulin, E. and Pomerleau. A. (1996). PID tuning for integrating and unstable processes, IEE Proceedings-Control Theory and Applications, 143, pp. 429-435.
296. Poulin, É. and Pomerleau. A. (1997). Unified PID design method based on a maximum peak resonance specification, IEE Proceedings-Control Theory and Applications, 144, pp. 566-574.
297. Poulin, É. and Pomerleau, A. (1999). PI settings for integrating processes based on ultimate cycle information, IEEE Transactions on Control Systems Technology, 7, pp. 509-511.
298. Pramod, S. and Chidambaram, M. (2000). Closed loop identification of transfer function model for unstable bioreactors for tuning PID controllers, Bioprocess and Biosystems Engineering, 22, pp. 185-188.
299. Prashanti, G. and Chidambaram, M. (2000). Set-point weighted PID controllers for unstable systems, Journal of the Franklin Institute, 337, pp. 201-215.
300. Pulkkinen, J., Koivo, H. N. and Mäkelä, K. (1993). Tuning of a robust PID controller-application to heating process in extruder, Proceedings of the 2nd IEEE Conference on Control Applications (Vancouver, B. C., Canada), pp. 811-816.
301. Reswick, J. B. (1956). Disturbance-response feedback-a new control concept, Transactions of the ASME, January, pp. 153-162.
302. Rice, R. and Cooper, D. J. (2002), Design and tuning of PID controllers for integrating (non self-regulating) processes, Proceedings of the ISA Annual Meeting (Chicago, IL, U. S. A.), 424, Paper P057.
303. Rivera, D. E. and Jun, K. S. (2000). An integrated identification and control design methodology for multivariable process system applications, IEEE Control Systems Magazine, June, pp. 25-37.
304. Rivera, D. E., Morari, M. and Skogestad, S. (1986). Internal Model Control. 4. PID controller design, Industrial and Engineering Chemistry Process Design and Development, 25, pp. 252-265.
305. Robbins, L. A. (2002). Tune control loops for minimum variability, Chemical Engineering Progress, January, pp. 68-70.
306. Rotach, Y. V. (1994). Calculation of the robust settings of automatic controllers, Thermal Engineering (Russia), 41, pp. 764-769.
307. Rotach, V. Y. (1995). Automatic tuning of PID-controllers-expert and formal methods, Thermal Engineering (Russia), 42, pp. 794-800.
308. Rotstein, G. E. and Lewin, D. E. (1991). Simple PI and PID tuning for open-loop unstable systems, Industrial Engineering Chemistry Research, 30, pp. 1864-1869.
309. Rovira, A. A., Murrill, P. W. and Smith, C. L. (1969). Tuning controllers for setpoint changes, Instruments and Control Systems, 42 (December), pp. 67-69.
310. Rutherford, C. I. (1950). The practical application of frequency response analysis to automatic process control, Proceedings of the Institution of Mechanical Engineers (London), 162, pp. 334-354.
311. th Conference on Systems Engineering (Coventry, U. K.), pp. 608-613.
312. Sain, S. G. and Özgen, C. (1992). Identification and tuning of processes with large deadtime, Control and Computers, 20(3), pp. 73-78.
313. Saito, T., Kawakami, J., Takahashi, S., Suehiro, T., Matsumoto, H. and Tachibana, K. (1990). PID controller system, US Patent No. 4, 903, 192.
314. Sakai, Y., Nakai, Y., Míyabe, A. and Kawano, T. (1989). Self-tuning controller, US Patent 4, 881, 160.
315. Schaedel, H. M. (1997). A new method of direct PID controller design based on the principle of cascaded damping ratios, Proceedings of the European Control Conference (Brussels, Belgium), Paper WE-A H4.
316. Schneider, D. M. (1988). Control of processes with time delays, IEEE Transactions on Industry Applications, 24, pp. 186-191.
317. Seki, H., Ogawa, M. and Ohshima, M. (2000). Retuning PID temperature controller for an unstable gas-phase polyolefin reactor, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 473-478.
318. Setiawan, A., Albright, L. D. and Phelan, R. M. (2000). Application of pseudo-derivative-feedback algorithm in greenhouse air temperature control, Computers and Electronics in Agriculture, 26, pp. 283-302.
319. Shen, J.-C. (1999). Tuning PID controller for a plant with under-damped response, Proceedings of the IEEE International Conference on Control Applications (Hawaii, U. S. A.), pp. 115-120.
320. Shen, J.-C. (2000). New tuning method for PID control of a plant with underdamped response, Asian Journal of Control, 2(1), pp. 31-41.
321. Shen, J.-C. (2002). New tuning method for PID controller, ISA Transactions, 41, pp. 473-484.
322. Shi, J. and Lee, W. S. (2002). IMC-PID controllers for first-order plus dead-time processes: a simple design with guaranteed phase margin, Proceedings of IEEE Region 10 Conference on Computers, Communications, Control and Power Engineering (Beijing, China), pp. 1397-1400.
323. th Asian Control Conference, (Melbourne, Australia).
324. Shigemasa, T., Lino, Y. and Kanda, M. (1987). Two degrees of freedom PID auto-tuning controller, Proceedings of the ISA International Conference and Exhibition. Advances in Instrumentation and Control, pp. 703-711.
325. Shin, C.-H., Yoon, M.-H. and Park, I.-S. (1997). Automatic tuning algorithm of the PID controller using two Nyquist points identification, Proceedings of the Society of Instrument and Control Engineers annual conference (Tokyo, Japan), pp. 1225-1228.
326. rd Edition).
327. Shinskey, F. G. (1994). Feedback controllers for the process industries (McGraw-Hill Inc., New York).
328. th Edition).
329. Shinskey, F. G. (2000). PID-deadtime control of distributed processes, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 14-18.
330. Shinskey, F. G. (2001). PID-deadtime control of distributed processes, Control Engineering Practice, 9, pp. 1177-1183.
331. Sklaroff, M. (1992). Adaptive controller in a process control system and a method therefor, US Patent 5, 170, 341.
332. rd International Symposium on Methods and Models in Automation and Robotics (MMAR '96), (Miedzyzdroje, Poland), pp. 765-770.
333. Skogestad, S. (2001). Probably the best simple PID tuning rules in the world, AIChE Annual Meeting (Reno, Nevada, U. S. A.) [Online]. Available at http: //www. nt. ntnu. no/users/skoge/nublications/2001/skogestad reno/tuningnaner. odf [accessed 24 September 2004].
334. Skogestad, S. (2003). Simple analytic rules for model reduction and PID controller tuning, Journal of Process Control, 13, pp. 291-309.
335. Skogestad, S. (2004a). Lower limit on controller gain for acceptable disturbance rejection, Proceedings of the International Symposium on Advanced Control of Chemical Processes (Hong Kong, China).
336. Skogestad, S. (2004b). Simple analytic rules for model reduction and PID controller tuning, Modeling, Identification and Control, 25, pp. 85-120.
337. nd Edition).
338. Smith, C. L. (2002). Intelligently tune PI controllers, Chemical Engineering, August, pp. 169-177.
339. Smith, C. L. (2003). Intelligently tune PID controllers, Chemical Engineering, January, pp. 56-62.
340. Smith, C. L., Corripio, A. B. and Martin, J. (1975). Controller tuning from simple process models, Instrumentation Technology, December, pp. 39-44.
341. Smith, L. (1998). A modified Smith predictor for extruded diameter control, InstMC Mini Symposium In UKACC International Conference on Control (Swansea, U. K.), Lecture 5.
342. Somani, M. K., Kothare, M. V. and Chidambaram, M. (1992). Design formulae for PI controllers, Hungarian Journal of Industrial Chemistry, 20, pp. 205-211.
343. Sree, R. P. and Chidambaram, M. (2003a). Simple method of tuning PI controllers for stable inverse response systems, Journal of the Indian Institute of Science, 83 (May-August), pp. 73-85.
344. Sree, R. P. and Chidambaram, M. (2003b). Control of unstable bioreactor with dominant unstable zero, Chemical and Biochemical Engineering Quarterly, 17(2), pp. 139-145.
345. Sree, R. P. and Chidambaram, M. (2003c). A simple method of tuning PI controllers for unstable systems with a zero, Chemical and Biochemical Engineering Quarterly, 17(3), pp. 207-212.
346. Sree, R. P. and Chidambaram, M. (2004). Control of unstable reactor with an unstable zero, Indian Chemical Engineer Section A, 46(1), pp. 21-26.
347. Sree, R. P. and Chidambaram, M. (2005a). Set point weighted PID controllers for unstable systems, Chemical Engineering Communications, 192, pp. 1-13.
348. Sree, R. P. and Chidambaram, M. (2005b). A simple and robust method of tuning PID controllers for integrator/dead time processes, Journal of Chemical Engineering of Japan, 38(2), pp. 113-119.
349. Sree, R. P., Srinivas, M. N. and Chidambaram, M. (2004). A simple method of tuning PID controllers for stable and unstable FOPTD systems, Computers and Chemical Engineering, 28, pp. 2201-2218.
350. Srinivas, M. N. and Chidambaram, M. (2001). Set-point weighted PID controllers, Proceedings of the International Conference on Quality, Reliability and Control (ICQRC-2001), (Mumbai, India), pp. C22-1-C22-5.
351. Srividya, R. and Chidambaram, M. (1997). On-line controllers tuning for integrator plus delay systems, Process Control and Quality, 9, pp. 59-66.
352. nd Edition).
353. St. Clair, D. W. (2000). The PID algorithm [Online], Available at http: //members. aol. com/pidcontrol/Did algorithm. html [accessed 28 June 2005].
354. Streeter, M. J., Keane, M. A. and Koza, J. R. (2003). Automatic synthesis using genetic programming of improved PID tuning rules, Preprint of Proceedings of Intelligent Control Systems and Signal Processing Conference (Ed: A. D. Ruano), pp. 494-499.
355. Sung, S. W. O., J., Lee, I.-B., Lee, J. and Yi, S.-H. (1996). Automatic tuning of PID controller using second-order plus time delay model, Journal of Chemical Engineering of Japan, 29, pp. 991-999.
356. Suyama, K. (1992). A simple design method for sampled-data PID control systems with adequate step responses, Proceedings of the International Conference on Industrial Electronics, Control, Instrumentation and Automation, pp. 1117-1122.
357. Suyama, K. (1993). A simple design method for sampled-data I-PD control systems, Proceedings of the Annual Conference of the IEEE Industrial Electronics Society (HI, U. S. A.), pp. 2293-2298.
358. Syrcos, G. and Kookos, I. K. (2005). PID controller tuning using mathematical programming, Chemical Engineering and Processing, 44, pp. 41-49.
359. Tachibana, Y. (1984). Identification of a system with dead time and its application to auto tuner, Electrical Engineering in Japan, 104, pp. 128-137.
360. Taguchi, H. and Araki, M. (2000). Two-degree-of-freedom PID controllers-their functions and optimal tuning, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 95-100.
361. Taiwo, O. (1993). Comparison of four methods of on-line identification and controller tuning, IEE Proceedings, Part D, 140, pp. 323-327.
362. Tan, K. K., Lee, T. H. and Wang, Q. G. (1996). Enhanced automatic tuning procedure for process control of PI/PID controller, AIChE Journal, 42, pp. 2555-2562.
363. Tan, K. K., Lee, T. H. and Jiang, X. (2001). On-line relay identification, assessment and tuning of PID controller, Journal of Process Control, 11, pp. 483-496.
364. Tan, K. K., Wang, Q.-G., Hang, C. C. and Hägglund, T. J. (1999a). Advances in PID control (Advances in Industrial Control Series, Springer-Verlag London).
365. Tan, W., Liu, J. and Sun, W. (1998a). PID tuning for integrating processes, Proceedings of the IEEE International Conference on Control Applications (Trieste, Italy), 2, pp. 873-876.
366. Tan, W., Liu, K. and Tam, P. K. S. (1998b). PID tuning based on loop-shaping H, control, IEE Proceedings-Control Theory and Applications, 145(6), pp. 485-490.
367. Tan, W., Yuan, Y. and Niu, Y. (1999b). Tuning of PID controller for unstable process, Proceedings of the IEEE International Conference on Control Applications (Hawaii, U. S. A.), pp. 121-124.
368. Tang, W., Shi, S. and Wang, M. (2002). Autotuning PID control for large time-delay processes and its application to paper basis weight control, Industrial and Engineering Chemistry Research, 41, pp. 4318-4327.
369. Tavakoli, S. and Fleming, P. (2003). Optimal tuning of PI controllers for first order plus dead time/long dead time models using dimensional analysis, Proceedings of the European Control Conference (Cambridge, UK).
370. th IEEE International Conference on Control and Automation (Canada), pp. 942-946.
371. Thomasson, F. Y. (1997). Tuning guide for basic control loops, Proceedings of the Process Control, Electrical and Information (TAAPI) Conference, pp. 137-148.
372. Tinham, B. (1989). Tuning PID controllers, Control and Instrumentation, September, pp. 79-83.
373. Tsang, K. M. and Rad, A. B. (1995). A new approach to auto-tuning of PID controllers, International Journal of Systems Science, 26(3), pp. 639-658.
374. Tsang, K. M., Rad, A. B. and To, F. W. (1993). Online tuning of PID controllers using delayed state variable filters, Proceedings of the IEEE Region 10 Conference on Computer, Communication, Control and Power Engineering (Beijing, China), 4, pp. 415-419.
375. Tyreus, B. D. and Luyben, W. L. (1992). Tuning PI controllers for integrator/dead time processes, Industrial Engineering Chemistry Research, 31, pp. 2625-2628.
376. Valentine, C. C. and Chidambaram, M. (1997a). Robust PI and PID control of stable first order plus time delay systems, Indian Chemical Engineer Section A, 39(1), pp. 9-14.
377. Valentine, C. C. and Chidambaram, M. (1997b). PID control of unstable time delay systems, Chemical Engineering Communications, 162, pp. 63-74.
378. Valentine, C. C. and Chidambaram, M. (1998). Robust control of unstable first order plus time delay systems, Indian Chemical Engineer Section A, 40(1), pp. 19-23.
379. Van der Grinten, P. M. E. M. (1963). Finding optimum controller settings, Control Engineering, December, pp. 51-56.
380. VanDoren, V. J. (1998). Ziegler-Nichols methods facilitate loop tuning, Control Engineering, December.
381. Van Overschee, P. and De Moor, B. (2000). RaPID: the end of heuristic PID tuning, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 687-692.
382. Venkatashankar, V. and Chidambaram, M. (1994). Design of P and PI controllers for unstable first order plus time delay systems, International Journal of Control, 60, pp. 137-144.
383. Visioli, A. (2001). Tuning of PID controllers with fuzzy logic, IEE Proceedings-Control Theory and Applications, 148(1), pp. 180-184.
384. Vítečková, M. (1999). Seřízení číslicových I analogových regulátorů pro regulované soustavy s dopravním zpoždĕním (Digital and analog controller tuning for processes with time delay), Automatizace, 42(2), pp. 106-111 (in Czech).
385. Vítečková, M. and Víteček, A. (2002). Analytical controller tuning method for proportional non-oscillatory plants with time delay, Proceedings of the International Carpathian Control Conference (Malenovice, Czech Republic), pp. 297-302.
386. nd IFAC Conference on Control Systems Design (Bratislava, Slovak Republic), pp. 59-64.
387. Vítečková, M., Víteček, A. and Smutný, L. (2000a). Controller tuning for controlled plants with time delay, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 283-288.
388. Vítečková, V., Víteček, A. and Smutný, L. (2000b). Simple PI and PID controllers tuning for monotone self-regulating plants, Preprints of Proceedings of PID '00: IFAC Workshop on digital control (Terrassa, Spain), pp. 289-294.
389. Voda, A. and Landau, I. D. (1995). The autocalibration of PI controllers based on two frequency measurements, International Journal of Adaptive Control and Signal Processing, 9, pp. 395-421.
390. Vrančić, D. (1996). Design of anti-windup and bumpless transfer protection. Part II: PID controller tuning by multiple integration method, PhD thesis (University of Ljubljana, J. Stefan Institute, Ljubljana, Slovenia).
391. th Asian Control Conference (Melbourne, Australia).
392. th Asian Control Conference (Melbourne, Australia).
393. Vrančić, D. and Lumbar, S. (2004). Improving PID controller disturbance rejection by means of magnitude optimum, Report DP-8955 (J. Stefan Institute, Ljubljana, Slovenia).
394. Vrančić, D., Peng, Y., Strmčnik, S. and Hanus, R. (1996). A new tuning method for PI controllers based on a process step response, Proceedings of CESA '96 IMACS MultiConference Symposium on Control, Optimisation and Supervision (Lille, France), 2, pp. 790-794.
395. th World Congress (Beijing, China), Paper 3b-02-3.
396. Vranŏić, D., Strmčnik, S. and Kocijan, J. (2004c). Improving disturbance rejection of PI controllers by means of the magnitude optimum method, ISA Transactions, 43, pp. 73-84.
397. Wade, H. L. (1994). Regulatory and advanced regulatory control: system development (ISA).
398. Wang, F.-S., Juang, W.-S. and Chan, C.-T. (1995a). Optimal tuning of PID controllers for single and cascade control loops, Chemical Engineering Communications, 132, pp. 15-34.
399. th World Congress on Intelligent Control and Automation (Hangzhou, P. R. China), pp. 19-23.
400. Wang, L., Barnes, T. J. D. and Cluett, W. R. (1995b). New frequency-domain design method for PID controllers, IEE Proceedings-Control Theory and Applications, 142, pp. 265-271.
401. Wang, L. and Cluett, W. R. (1997). Tuning PID controllers for integrating processes, IEE Proceedings-Control Theory and Applications, 144(5), pp. 385-392.
402. Wang, L. and Cluett, W. R. (2000). From plant data to process control (Taylor and Francis Ltd.).
403. Wang, Q.-G., Lee, T.-H., Fung, H.-W., Bi, Q. and Zhang, Y. (1999). PID tuning for improved performance, IEEE Transactions on Control Systems Technology, 7(4), pp. 457-465.
404. th IEEE International Symposium on Intelligent Control (Rio, Patras, Greece), pp. 133-138.
405. Wang, Q.-G., Zhang, Y. and Guo, X. (2001a). Robust closed-loop identification with application to auto-tuning, Journal of Process Control, 11, pp. 519-530.
406. Wang, T.-S. and Clements, W. C. (1995). Adaptive multivariable PID control of a distillation column with unknown and varying dead time, Chemical Engineering Communications, 132, pp. 1-13.
407. Wang, Y., Schinkel, M, Schmitt-Hartmann, T. and Hunt, K. J. (2002). PID and PID-like controller design by pole assignment within D-stable regions, Asian Journal of Control, 4(4), pp. 423-432.
408. Wang, Y.-G. and Cai, W.-J. (2001). PID tuning for integrating processes with sensitivity specification, Proceedings of the IEEE Conference on Decision and Control (Orlando, Florida, U. S. A.), pp. 4087-4091.
409. Wang, Y.-G. and Cai, W.-J. (2002). Advanced proportional-integral-derivative tuning for integrating and unstable processes with gain and phase margin specifications, Industrial Engineering Chemistry Research, 41, pp. 2910-2914.
410. Wang, Y.-G., Cai, W.-J. and Shi, Z.-G. (2001b). PID autotuning for integrating processes with specifications on gain and phase margins, Proceedings of the American Control Conference (Arlington, VA, U. S. A.), pp. 2181-2185.
411. Wang, Y.-G. and Shao, H.-H. (1999). PID autotuner based on gain-and phase-margin specification, Industrial Engineering Chemistry Research, 38, pp. 3007-3012.
412. Wang, Y.-G. and Shao, H.-H. (2000a). Optimal tuning for PI controller, Automatica, 36, pp. 147-152.
413. Wang, Y.-G. and Shao, H.-H. (2000b). PID auto-tuner based on sensitivity specification, Transactions of the Institute of Chemical Engineers, 78(A), pp. 312-316.
414. Wang, Y.-G., Shao, H.-H. and Wang, J. (2000a). PI tuning for processes with large dead time, Proceedings of the American Control Conference (Chicago, U. S. A.), pp. 4274-4278.
415. Wills, D. M. (1962a). Tuning maps for three-mode controllers, Control Engineering, April, pp. 104-108.
416. Wills, D. M. (1962b). A guide to controller tuning, Control Engineering, August, pp. 93-95.
417. Wilton, S. R. (1999). Controller tuning, ISA Transactions, 38, pp. 157-170.
418. Witt, S. D. and Waggoner, R. C. (1990). Tuning parameters for non-PID three-mode controllers, Hydrocarbon Processing, June, pp. 74-78.
419. Wojsznis, W. K. and Blevins, T. L. (1995). System and method for automatically tuning a process controller, U. S. Patent Number 5, 453, 925.
420. Wojsznis, W. K., Blevins, T. L. and Thiele, D. (1999). Neural network assisted control loop tuner, Proceedings of the IEEE International Conference on Control Applications (HI, U. S. A.), 1, pp. 427-431.
421. Wolfe, W. A. (1951). Controller settings for optimum control, Transactions of the ASME, May, pp. 413-418.
422. Xu, J. and Shao, H. (2003a). Advanced PID tuning for integrating processes with a new robustness specification, Proceedings of the American Control Conference (Denver, CO., U. S. A.), pp. 3961-3966.
423. Xu, J. and Shao, H. (2003b). Advanced PID tuning for unstable processes based on a new robustness specification, Proceedings of the American Control Conference (Denver, CO., U. S. A.), 368-372.
424. nd IEEE Conference on Decision and Control (Maui, Hawaii, U. S. A.), pp. 139-142.
425. Xu, J.-H., Sun, R. and Shao, H.-H. (2004). PI controller tuning for large dead-time processes, Kongzhi Yu Juece/Control and Decision, 19(1), pp. 99-101 (in Chinese).
426. Yang, J. C.-Y. and Clarke, D. W. (1996). Control using self-validating sensors, Transactions of the Institute of Measurement and Control, 18, pp. 15-23.
427. Yi, C. and De Moor, B. L. R. (1994). Robustness analysis and control system design for a hydraulic servo system, IEEE Transactions on Control Systems Technology, 2(3), pp. 183-197.
428. Young, A. J. (1955). An introduction to process control system design (Longman, Green and Company, London).
429. Yu, C.-C. (1999). Autotuning of PID controllers (Advances in Industrial Control Series, Springer-Verlag London Ltd.).
430. Yu, S. W. (1988). Optimal PI tuning for load disturbances, Journal of the Chinese Institute of Chemical Engineers, 19(6), pp. 349-357.
431. Zhang, D. (1994). Process dynamics and controller selection of DCS, Proceedings of the ISA Advances in Instrumentation and Control Conference (Anaheim, U. S. A), 49(2), pp. 231-240.
432. Zhang, W., Xi, Y., Yang, G. and Xu, X. (2002). Design PID controllers for desired time-domain or frequency-domain response, ISA Transactions, 41, pp. 511-520.
433. ∞ PID controller design for runaway processes with time delay, ISA Transactions, 41, pp. 317-322.
434. Zhang, W., Xu, X. and Sun, Y. (1999). Quantitative performance design for integrating processes with time delay, Automatica, 35, pp. 719-723.
435. ∞ theory, Proceedings of the IEEE International Conference on Industrial Technology, pp. 9-12.
436. Zhong, Q.-C. and Li, H.-X. (2002). 2-degree-of-freedom proportional-integral-derivative-type controller incorporating the Smith principle for processes with dead time, Industrial Engineering Chemistry Research, 41, pp. 2448-2454.
437. Zhuang, M. and Atherton, D. P. (1993). Automatic tuning of optimum PID controllers, IEE Proceedings, Part D, 140, pp. 216-224.
438. Ziegler, J. G. and Nichols, N. B. (1942). Optimum settings for automatic controllers, Transactions of the ASME, November, pp. 759-768.
439. Zou, H., Hedstrom, K. P., Warrior, J. and Hays, C. L. (1997). Field based process control system with auto-tuning, U. S. Patent Number 5, 691, 896.
440. Zou, H. and Brigham, S. E. (1998). Process control system with asymptotic auto-tuning, U. S. Patent Number 5, 818, 714.