Advancements in CAD/CAM technology: Options for practical implementation

Journal of Prosthodontic Research

Volumn 60, Issue 2, 2016, Pages 72-84

  Alghazzawi, Tariq F ^a,b  

^a TAIBAH UNIVERSITY   (Saudi Arabia)

^b UNIVERSITY OF ALABAMA AT BIRMINGHAM   (United States)

Author keywords

3D printing; CAD CAM; Digital impression; Milling; Scanner; Virtual articulator

Indexed keywords

COMPUTER AIDED DESIGN; DENTAL IMPRESSION; DENTISTRY; DENTURE DESIGN; HUMAN; PROCEDURES; SOFTWARE; THREE DIMENSIONAL PRINTING; TRENDS;

COMPUTER-AIDED DESIGN; DENTAL IMPRESSION TECHNIQUE; DENTISTRY; DENTURE DESIGN; HUMANS; PRINTING, THREE-DIMENSIONAL; SOFTWARE;

EID: 84959246061     PISSN: 18831958     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jpor.2016.01.003     Document Type: Review

References (69)

1. Arias D.M., Trushkowsky R.D., Brea L.M., David S.B. Treatment of the patient with gummy smile in conjunction with digital smile approach. Dent Clin North Am 2015, 59(3):703-716.
2. Lin W.S., Zandinejad A., Metz M.J., Harris B.T., Morton D. Predictable restorative work flow for computer-aided design/computer-aided manufacture-fabricated ceramic veneers utilizing a virtual smile design principle. Oper Dent 2015, 40(4):357-363.
3. Zandparsa R. Digital imaging and fabrication. Dent Clin North Am 2014, 58(1):135-158.
4. Sannino G., Germano F., Arcuri L., Bigelli E., Arcuri C., Barlattani A. CEREC CAD/CAM chairside system. Oral Implantol (Rome) 2015, 7(3):57-70.
5. Yuzbasioglu E., Kurt H., Turunc R., Bilir H. Comparison of digital and conventional impression techniques: evaluation of patients' perception, treatment comfort, effectiveness and clinical outcomes. BMC Oral Health 2014, 30(14):10.
6. Patzelt S.B., Lamprinos C., Stampf S., Att W. The time efficiency of intraoral scanners: an in vitro comparative study. J Am Dent Assoc 2014, 145(6):542-551.
7. Ng J., Ruse D., Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014, 112(3):555-560.
8. Pradíes G., Zarauz C., Valverde A., Ferreiroa A., Martínez-Rus F. Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions based on wavefront sampling technology. J Dent 2015, 43(2):201-208.
9. Ahrberg D., Lauer H.C., Ahrberg M., Weigl P. Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial. Clin Oral Investig 2015, (June).
10. Anadioti E., Aquilino S.A., Gratton D.G., Holloway J.A., Denry I., Thomas G.W., et al. 3D and 2D marginal fit of pressed and CAD/CAM lithium disilicate crowns made from digital and conventional impressions. J Prosthodont 2014, 23(8):610-617.
11. Vennerstrom M., Fakhary M., Von Steyern P.V. The fit of crowns produced using digital impression systems. Swed Dent J 2014, 38(3):101-110.
12. Akyalcin S., Cozad B.E., English J.D., Colville C.D., Laman S. Diagnostic accuracy of impression-free digital models. Am J Orthod Dentofacial Orthop 2013, 144(6):916-922.
13. Maestre-Ferrín L., Romero-Millán J., Peñarrocha-Oltra D., Peñarrocha-Diago M. Virtual articulator for the analysis of dental occlusion: an update. Med Oral Patol Oral Cir Bucal 2012, 17(1):e160-e163.
14. Solaberrieta E., Mínguez R., Barrenetxea L., Otegi J.R., Szentpétery A. Comparison of the accuracy of a 3-dimensional virtual method and the conventional method for transferring the maxillary cast to a virtual articulator. J Prosthet Dent 2015, 113(3):191-197.
15. Solaberrieta E., Mínguez R., Barrenetxea L., Etxaniz O. Direct transfer of the position of digitized casts to a virtual articulator. J Prosthet Dent 2013, 109(6):411-414.
16. Solaberrieta E., Otegi J.R., Mínguez R., Etxaniz O. Improved digital transfer of the maxillary cast to a virtual articulator. J Prosthet Dent 2014, 112(4):921-924.
17. Solaberrieta E., Minguez R., Barrenetxea L., Sierra E., Etxaniz O. Computer-aided dental prostheses construction using reverse engineering. Comput Methods Biomech Biomed Eng 2014, 17(12):1335-1346.
18. Koralakunte P.R., Aljanakh M. The role of virtual articulator in prosthetic and restorative dentistry. J Clin Diagn Res 2014, 8(7):ZE25-ZE28.
19. Solaberrieta E., Otegi J.R., Goicoechea N., Brizuela A., Pradies G. Comparison of a conventional and virtual occlusal record. J Prosthet Dent 2015, 114(1):92-97.
20. Galhano G.Á., Pellizzer E.P., Mazaro J.V. Optical impression systems for CAD-CAM restorations. J Craniofac Surg 2012, 23:e575-e579.
21. Tapie L., Lebon N., Mawussi B., Fron Chabouis H., Duret F., Attal J.P. Understanding dental CAD/CAM for restorations - the digital workflow from a mechanical engineering viewpoint. Int J Comput Dent 2015, 18(1):21-44.
22. Zimmermann M., Mehl A., Mörmann W.H., Reich S. Intraoral scanning systems - a current overview. Int J Comput Dent 2015, 18(2):101-129.
23. Ting-Shu S., Jian S. Intraoral digital impression technique: a review. J Prosthodont 2015, 24(4):313-321.
24. Abdel-Azim T., Zandinejad A., Metz M., Morton D. Maxillary and mandibular rehabilitation in the esthetic zone using a digital impression technique and CAD/CAM-fabricated prostheses: a multidisciplinary clinical report. Oper Dent 2015, 40(4):350-356.
25. Podhorsky A., Rehmann P., Wöstmann B. Tooth preparation for full-coverage restorations - a literature review. Clin Oral Investig 2015, 19(5):959-968.
26. Alghazzawi T., Alsamadani K., Lemons J., Liu P.R., Essig M., Bartolucci A., et al. Effect of imaging powder and CAD/CAM stone types on the marginal gap of zirconia crowns. J Am Dent Assoc 2015, 146(2):111-120.
27. da Cunha L.F., Mukai E., Hamerschmitt R.M., Correr G.M. Fabrication of lithium silicate ceramic veneers with a CAD/CAM approach: a clinical report of cleidocranial dysplasia. J Prosthet Dent 2015, 113(5):355-359.
28. Schmitter M., Seydler B.B. Minimally invasive lithium disilicate ceramic veneers fabricated using chairside CAD/CAM: a clinical report. J Prosthet Dent 2012, 107(2):71-74.
29. Kurbad A., Kurbad S. A new, hybrid material for minimally invasive restorations in clinical use. Int J Comput Dent 2013, 16(1):69-79.
30. Rauscher O. Impressionless implant-supported restorations with Cerec 4.2. Int J Comput Dent 2014, 17(2):159-168.
31. Lin W.S., Harris B.T., Morton D. The use of a scannable impression coping and digital impression technique to fabricate a customized anatomic abutment and zirconia restoration in the esthetic zone. J Prosthet Dent 2013, 109(3):187-191.
32. Nayyar N., Yilmaz B., McGlumphy E. Using digitally coded healing abutments and an intraoral scanner to fabricate implant-supported, cement-retained restorations. J Prosthet Dent 2013, 109(4):210-215.
33. Al-Abdullah K., Zandparsa R., Finkelman M., Hirayama H. An in vitro comparison of the accuracy of implant impressions with coded healing abutments and different implant angulations. J Prosthet Dent 2013, 110(2):90-100.
34. Anadioti E., Aquilino S.A., Gratton D.G., Holloway J.A., Denry I.L., Thomas G.W., et al. Internal fit of pressed and computer-aided design/computer-aided manufacturing ceramic crowns made from digital and conventional impressions. J Prosthet Dent 2015, 113(4):304-309.
35. Patzelt S.B., Bishti S., Stampf S., Att W. Accuracy of computer-aided design/computer-aided manufacturing-generated dental casts based on intraoral scanner data. J Am Dent Assoc 2014, 145(11):1133-1140.
36. Nam J., Tokutomi H. Using zirconia-based prosthesis in a complete-mouth reconstruction treatment for worn dentition with the altered vertical dimension of occlusion. J Prosthet Dent 2015, 113(2):81-85.
37. Mehra M., Vahidi F. Complete mouth implant rehabilitation with a zirconia ceramic system: a clinical report. J Prosthet Dent 2014, 112(1):1-4.
38. Flügge T.V., Schlager S., Nelson K., Nahles S., Metzger M.C. Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. Am J Orthod Dentofacial Orthop 2013, 144(3):471-478.
39. Yilmaz B. Incorporating digital scans of diagnostic casts into computed tomography for virtual implant treatment planning. J Prosthet Dent 2015, 114(2):178-181.
40. Van Noort R. The future of dental devices is digital. Dent Mater 2012, 28(1):3-12.
41. Torabi K., Farjood E., Hamedani S. Rapid prototyping technologies and their applications in prosthodontics: a review of Literature. J Dent (Shiraz) 2015, 16(1):1-9.
42. Mously H.A., Finkelman M., Zandparsa R., Hirayama H. Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique. J Prosthet Dent 2014, 112(2):249-256.
43. Abduo J., Lyons K., Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. Int J Dent 2014, 2014:783948.
44. Bosch G., Ender A., Mehl A. A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes. J Prosthet Dent 2014, 112(6):1425-1431.
45. Örtorp A., Jönsson D., Mouhsen A., Vult von Steyern P. The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study. Dent Mater 2011, 27(4):356-363.
46. Keating A.P., Knox J., Bibb R., Zhurov A.I. A comparison of plaster, digital and reconstructed study model accuracy. J Orthod 2008, 35(3):191-201.
47. Kim J.H., Kim K.B., Kim W.C., Kim J.H., Kim H.Y. Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique. Korean J Orthod 2014, 44(2):69-76.
48. Park J.M., Yi T.K., Koak J.Y., Kim S.K., Park E.J., Heo S.J. Comparison of five-axis milling and rapid prototyping for implant surgical templates. Int J Oral Maxillofac Implants 2014, 29(2):374-383.
49. Bidra A.S., Taylor T.D., Agar J.R. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives. J Prosthet Dent 2013, 109(6):361-366.
50. Bilgin M.S., Erdem A., Aglarci O.S., Dilber E. Fabricating complete dentures with CAD/CAM and RP technologies. J Prosthodont 2015, (June).
51. Kattadiyil M.T., Goodacre C.J., Baba N.Z. CAD/CAM complete dentures: a review of two commercial fabrication systems. J Calif Dent Assoc 2013, 41(6):407-416.
52. Goodacre C.J., Garbacea A., Naylor W.P., Daher T., Marchack C.B., Lowry J. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data. J Prosthet Dent 2012, 107(1):34-46.
53. Infante L., Yilmaz B., McGlumphy E., Finger I. Fabricating complete dentures with CAD/CAM technology. J Prosthet Dent 2014, 111(5):351-355.
54. Bidra A.S. The 2-visit CAD-CAM implant-retained overdenture: a clinical report. J Oral Implantol 2014, 40(6):722-728.
55. Yamamoto S., Kanazawa M., Iwaki M., Jokanovic A., Minakuchi S. Effects of offset values for artificial teeth positions in CAD/CAM complete denture. Comput Biol Med 2014, 52:1-7.
56. Beuer F., Schweiger J., Eichberger M., Kappert H.F., Gernet W., Edelhoff D. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings - a new fabrication mode for all-ceramic restorations. Dent Mater 2009, 25(1):121-128.
57. Kim K.Y., Kwon T.K., Kang T.J., Yang J.H., Lee S.J., Yeo I.S. Digital veneering system enhances microtensile bond strength at zirconia core-veneer interface. Dent Mater J 2014, 33(6):792-798.
58. Renda J.J., Harding A.B., Bailey C.W., Guillory V.L., Vandewalle K.S. Microtensile bond strength of lithium disilicate to zirconia with the CAD-on technique. J Prosthodont 2015, 24(3):188-193.
59. Logozzo S., Zanetti E.M., Franceschini G., Kilpelä A., Mäkynen A. Recent advances in dental optics - Part I: 3D intraoral scanners for restorative dentistry. Opt Laser Eng 2014, 54:203-221.
60. Logozzo S., Kilpelä A., Mäkynen A., Zanetti E.M., Franceschini G. Recent advances in dental optics-Part II: Experimental tests for a new intraoral scanner. Opt Laser Eng 2014, 54:187-196.
61. Ender A., Mehl A. In-vitro evaluation of the accuracy of conventional and digital methods of obtaining full-arch dental impressions. Quintessence Int 2015, 46(1):9-17.
62. Patzelt S.B., Emmanouilidi A., Stampf S., Strub J.R., Att W. Accuracy of full-arch scans using intraoral scanners. Clin Oral Investig 2014, 18(6):1687-1694.
63. Ender A., Mehl A. Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision. J Prosthet Dent 2013, 109(2):121-128.
64. Nedelcu R.G., Persson A.S. Scanning accuracy and precision in 4 intraoral scanners: an in vitro comparison based on 3-dimensional analysis. J Prosthet Dent 2014, 112(6):1461-1471.
65. Abduo J. Fit of CAD/CAM implant frameworks: a comprehensive review. J Oral Implantol 2014, 40(6):758-766.
66. Chuembou Pekam F., Marotti J., Wolfart S., Tinschert J., Radermacher K., Heger S. High-frequency ultrasound as an option for scanning of prepared teeth: an in vitro study. Ultrasound Med Biol 2015, 41(1):309-316.
67. Vollborn T., Habor D., Pekam F.C., Heger S., Marotti J., Reich S., et al. Soft tissue-preserving computer-aided impression: a novel concept using ultrasonic 3D-scanning. Int J Comput Dent 2014, 17(4):277-296.
68. 4 nanosecond laser. Dent Mater J 2014, 33(3):422-429.
69. Ebert J., Ozkol E., Zeichner A., Uibel K., Weiss O., Koops U., et al. Direct inkjet printing of dental prostheses made of zirconia. J Dent Res 2009, 88(7):673-676.