A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes

Journal of Prosthetic Dentistry

Volumn 112, Issue 6, 2014, Pages 1425-1431

  Bosch, Gabriel ^a   Ender, Andreas ^a   Mehl, Albert ^a  

^a UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

DENTAL MATERIAL;

CERAMICS; COMPUTER AIDED DESIGN; DENTAL INLAY; DENTAL SURGERY; DENTAL TECHNOLOGY; DEVICES; HUMAN; PROSTHESIS DESIGN; STANDARDS; STATISTICS AND NUMERICAL DATA; SURFACE PROPERTY; THREE DIMENSIONAL IMAGING; THREE DIMENSIONAL PRINTING; TOOTH CROWN;

CERAMICS; COMPUTER-AIDED DESIGN; CROWNS; DENTAL MATERIALS; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION, PERMANENT; HUMANS; IMAGING, THREE-DIMENSIONAL; INLAYS; PRINTING, THREE-DIMENSIONAL; SURFACE PROPERTIES; TECHNOLOGY, DENTAL;

EID: 84912128995     PISSN: 00223913     EISSN: 10976841     Source Type: Journal    
DOI: 10.1016/j.prosdent.2014.05.012     Document Type: Article

References (40)

1. E.A. McLaren All-ceramic alternatives to conventional metal-ceramic restorations Compend Contin Educ Dent 19 1998 307 312
2. R.A. Giordano Dental ceramic restorative systems Compend Contin Educ Dent 17 1996 779 786
3. A.J. Raigrodski Contemporary all-ceramic fixed partial dentures: a review Dent Clin North Am 48 2004 531 544
4. J. Tinschert, G. Natt, S. Hassenpflug, and H. Spiekermann Status of current CAD/CAM technology in dental medicine Int J Comput Dent 7 2004 25 45
5. I.S. Yeo, J.H. Yang, and J.B. Lee In vitro marginal fit of three all-ceramic crown systems J Prosthet Dent 90 2003 459 464
6. T. Miyazaki, Y. Hotta, J. Kunii, S. Kuriyama, and Y. Tamaki A review of dental CAD/CAM: current status and future perspectives from 20 years of experience Dent Mater J 28 2009 44 56
7. H. Alkumru, W.R. Hullah, P.M. Marquis, and H.J. Wilson Factors affecting the fit of porcelain jacket crowns Br Dent J 164 1988 39 43
8. M.C. Balkaya, A. Cinar, and S. Pamuk Influence of firing cycles on the margin distortion of 3 all-ceramic crown systems J Prosthet Dent 93 2005 346 355
9. D. Gemalmaz, and H.N. Alkumru Marginal fit changes during porcelain firing cycles J Prosthet Dent 73 1995 49 54
10. H.A. Mously, M. Finkelman, R. Zandparsa, and H. Hirayama Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique J Prosthet Dent 112 2014 249 256
11. A. Bindl, and W.H. Mormann Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM-generated partial crowns Eur J Oral Sci 111 2003 163 169
12. B. Reiss, and W. Walther Clinical long-term results and 10-year Kaplan-Meier analysis of Cerec restorations Int J Comput Dent 3 2000 9 23
13. B. Reiss Clinical results of Cerec inlays in a dental practice over a period of 18 years Int J Comput Dent 9 2006 11 22
14. R.G. Luthardt, R. Loos, and S. Quaas Accuracy of intraoral data acquisition in comparison to the conventional impression Int J Comput Dent 8 2005 283 294
15. M. Ziegler Digital impression taking with reproducibly high precision Int J Comput Dent 12 2009 159 163
16. A. Ender, and A. Mehl Full arch scans: conventional versus digital impressions-an in-vitro study Int J Comput Dent 14 2011 11 21
17. A. Mehl, A. Ender, W. Mormann, and T. Attin Accuracy testing of a new intraoral 3D camera Int J Comput Dent 12 2009 11 28
18. A. Ender, and A. Mehl Influence of scanning strategies on the accuracy of digital intraoral scanning systems Int J Comput Dent 16 2013 11 21
19. E. Yuksel, and A. Zaimoglu Influence of marginal fit and cement types on microleakage of all-ceramic crown systems Braz Oral Res 25 2011 261 266
20. A. Bindl, and W.H. Mormann Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations J Oral Rehabil 32 2005 441 447
21. T. Nakamura, N. Dei, T. Kojima, and K. Wakabayashi Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns Int J Prosthodont 16 2003 244 248
22. R. Euán, O. Figueras-Álvarez, J. Cabratosa-Termes, and R. Oliver-Parra Marginal adaptation of zirconium dioxide copings: influence of the CAD/CAM system and the finish line design J Prosthet Dent 112 2014 155 162
23. S. Addi, A. Hedayati-Khams, A. Poya, and G. Sjogren Interface gap size of manually and CAD/CAM-manufactured ceramic inlays/onlays in vitro J Dent 30 2002 53 58
24. O. Schaefer, D.C. Watts, B.W. Sigusch, H. Kuepper, and A. Guentsch Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility Dent Mater 28 2012 320 326
25. K.B. Lee, C.W. Park, K.H. Kim, and T.Y. Kwon Marginal and internal fit of all-ceramic crowns fabricated with two different CAD/CAM systems Dental Mater J 27 2008 422 426
26. K.W. Boening, B.H. Wolf, A.E. Schmidt, K. Kastner, and M.H. Walter Clinical fit of Procera AllCeram crowns J Prosthet Dent 84 2000 419 424
27. T.J. Song, T.K. Kwon, J.H. Yang, J.S. Han, J.B. Lee, and S.H. Kim Marginal fit of anterior 3-unit fixed partial zirconia restorations using different CAD/CAM systems J Adv Prosthodont 5 2013 219 225
28. T.A. Hamza, H.A. Ezzat, M.M. El-Hossary, H.A. Katamish, T.E. Shokry, and S.F. Rosenstiel Accuracy of ceramic restorations made with two CAD/CAM systems J Prosthet Dent 109 2013 83 87
29. P.K. Brawek, S. Wolfart, L. Endres, A. Kirsten, and S. Reich The clinical accuracy of single crowns exclusively fabricated by digital workflow-the comparison of two systems Clin Oral Invest 17 2013 2119 2125
30. W.H. Mormann, and J. Schug Grinding precision and accuracy of fit of CEREC 2 CAD-CIM inlays J Am Dent Assoc 128 1997 47 53
31. G. Sjogren Marginal and internal fit of four different types of ceramic inlays after luting: an in vitro study Acta Odontol Scand 53 1995 24 28
32. A. Keshvad, T. Hooshmand, F. Asefzadeh, F. Khalilinejad, M. Alihemmati, and R. Van Noort Marginal gap, internal fit, and fracture load of leucite-reinforced ceramic inlays fabricated by CEREC inLab and hot-pressed techniques J Prosthodont 20 2011 535 540
33. A. Felden, G. Schmalz, and K.A. Hiller Retrospective clinical study and survival analysis on partial ceramic crowns: results up to 7 years Clin Oral Investig 4 2000 199 205
34. M. Federlin, S. Krifka, M. Herpich, K.A. Hiller, and G. Schmalz Partial ceramic crowns: influence of ceramic thickness, preparation design and luting material on fracture resistance and marginal integrity in vitro Oper Dent 32 2007 251 260
35. N. Ilie, K.H. Kunzelmann, and R. Hickel Evaluation of micro-tensile bond strengths of composite materials in comparison to their polymerization shrinkage Dent Mater 22 2006 593 601
36. N. Kramer, U. Lohbauer, and R. Frankenberger Adhesive luting of indirect restorations Am J Dent 13 2000 60 76
37. U. Lohbauer, N. Kramer, A. Petschelt, and R. Frankenberger Correlation of in vitro fatigue data and in vivo clinical performance of a glass ceramic material Dent Mater 24 2008 39 44
38. M. Groten, D. Axmann, L. Probster, and H. Weber Determination of the minimum number of marginal gap measurements required for practical in-vitro testing J Prosthet Dent 83 2000 40 49
39. O. Moldovan, R.G. Luthardt, N. Corcodel, and H. Rudolph Three-dimensional fit of CAD/CAM-made zirconia copings Dent Mater 27 2011 1273 1278
40. R.G. Luthardt, P. Kuhmstedt, and M.H. Walter A new method for the computer-aided evaluation of three-dimensional changes in gypsum materials Dent Mater 19 2003 19 24