The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: A comparative in vitro study

Dental Materials

Volumn 27, Issue 4, 2011, Pages 356-363

  Örtorp, Anders ^a   Jönsson, David ^b   Mouhsen, Alaa ^b   Vult Von Steyern, Per ^b  

^a UNIVERSITY OF GOTHENBURG   (Sweden)

^b MALMÖ UNIVERSITY   (Sweden)

Author keywords

Accuracy; Cement film thickness; Discrepancies; Fabrication techniques; Marginal gaps

Indexed keywords

ACCURACY; BEST FIT; DIGITAL PHOTOS; DIRECT LASER METAL SINTERING; DISCREPANCIES; FABRICATION TECHNIQUE; FABRICATION TECHNIQUES; FOUR-GROUP; IN-VITRO; MARGINAL GAP; MASTER MODEL; MEASUREMENT POINTS; MEASUREMENT SOFTWARE; ONE-WAY ANOVA; PRODUCTION TECHNIQUES; STATISTICAL ANALYSIS; WORKING MODELS;

CEMENTS; CHROMIUM; COBALT; COMPUTER GRAPHICS; DENTAL PROSTHESES; EPOXY RESINS; INDEPENDENT COMPONENT ANALYSIS; PRODUCTION; REGRESSION ANALYSIS; RESINS; SILICONES; SINTERING;

FABRICATION;

BIOMEDICAL AND DENTAL MATERIALS; CHROMIUM DERIVATIVE; EPOXY RESIN; RESIN CEMENT; SILICONE DERIVATIVE; WAX;

ARTICLE; CEMENTATION; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL CARE; DENTAL IMPRESSION; DENTAL SURGERY; DENTURE; ENDODONTICS; HUMAN; IMAGE PROCESSING; LASER; MATERIALS TESTING; METHODOLOGY; MOLAR TOOTH; PHOTOGRAPHY; PREMOLAR TOOTH; SURFACE PROPERTY;

BICUSPID; CEMENTATION; CHROMIUM ALLOYS; COMPUTER-AIDED DESIGN; DENTAL ABUTMENTS; DENTAL CASTING TECHNIQUE; DENTAL IMPRESSION MATERIALS; DENTAL IMPRESSION TECHNIQUE; DENTAL MARGINAL ADAPTATION; DENTAL MATERIALS; DENTAL MODELS; DENTURE DESIGN; DENTURE, PARTIAL, FIXED; EPOXY RESINS; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; LASERS; MATERIALS TESTING; MOLAR; PHOTOGRAPHY; RESIN CEMENTS; SILICONES; SURFACE PROPERTIES; TOOTH PREPARATION, PROSTHODONTIC; WAXES;

EID: 79952283407     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2010.11.015     Document Type: Article

References (33)

1. K. Quante, K. Ludwig, and M. Kern Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology Dent Mater 24 2008 1311 1315
2. P. Vigolo, and F. Fonzi An in vitro evaluation of fit of zirconium-oxide-based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles J Prosthodont 17 2008 621 626
3. L. Jahangiri, C. Wahlers, E. Hittelman, and P. Matheson Assessment of sensitivity and specificity of clinical evaluation of cast restoration marginal accuracy compared to stereomicroscopy J Prosthet Dent 93 2005 138 142 (Pubitemid 40170082)
4. J.R. Holmes, S.C. Bayne, G.A. Holland, and W.D. Sulik Considerations in measurement of marginal fit J Prosthet Dent 62 1989 405 408
5. R. Mejia, and S.M. Tobon Marginal fit of metal ceramic restorations subjected to a standardized postsoldering technique J Prosthet Dent 83 2000 535 539
6. P. Limkangwalmongkol, G.J. Chiche, and M.B. Blatz Precision of fit of two margin designs for metal-ceramic crowns J Prosthodont 16 2007 233 237
7. L.V. Foster Failed conventional bridge work from general dental practice: clinical aspects and treatment needs of 142 cases Br Dent J 168 1990 199 201
8. N.C. Soriani, M.B. Leal, S.M. Paulino, V.O. Pagnano, and O.L. Bezzon Effect of the use of die spacer on the marginal fit of copings cast in NiCr, NiCrBe and commercially pure titanium Braz Dent J 18 2007 225 230
9. C.A. Mitchell, M.R. Pintado, and W.H. Douglas Nondestructive, in vitro quantification of crown margins J Prosthet Dent 85 2001 575 584 (Pubitemid 33601385)
10. Y. Kokubo, C. Ohkubo, M. Tsumita, A. Miyashita, P. Vult von Steyern, and S. Fukushima Clinical marginal and internal gaps of Procera AllCeram crowns J Oral Rehabil 32 2005 526 530 (Pubitemid 40979202)
11. A.H. Tjan, T. Li, G.I. Logan, and L. Baum Marginal accuracy of complete crowns made from alternative casting alloys J Prosthet Dent 66 1991 157 164
12. M. Laurent, P. Scheer, J. Dejou, and G. Laborde Clinical evaluation of the marginal fit of cast crowns-validation of the silicone replica method J Oral Rehabil 35 2008 116 122
13. A. Bindl, and W.H. Mörmann Marginal and internal fit of all-ceramic CAD/CAM crown-copings on chamfer preparations J Oral Rehabil 32 2005 441 447 (Pubitemid 40770036)
14. R. Oyagüe, A. Turrión, M. Toledano, F. Monticelli, and R. Osorio In vitro vertical misfit evaluation of cast frameworks for cement-retained implant-supported partial prostheses J Dent 37 2009 52 58
15. F.M. Milan, S. Consani, L. Correr Sobrinho, M.A. Sinhoreti, M.D. Sousa-Neto, and J.C. Knowles Influence of casting methods on marginal and internal discrepancies of complete cast crowns Braz Dent J 15 2004 127 132 (Pubitemid 40632038)
16. Y. Ucar, T. Akova, M. Akyil, and W. Brantley Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: laser-sintered Co-Cr crowns J Prosthet Dent 102 2009 253 259
17. J. Kunii, Y. Hotta, Y. Tamaki, A. Ozawa, Y. Kobayashi, and A. Fujishima Effect of sintering on the marginal and internal fit of CAD/CAM-fabricated zirconia frameworks Dent Mater J 26 2007 820 826
18. P. Lombardas, A. Carbunaru, M.E. McAlarney, and R.W. Toothaker Dimensional accuracy of castings produced with ringless and metal ring investment systems J Prosthet Dent 84 2000 27 31
19. A. Persson, M. Andersson, A. Oden, and G. Sandborgh-Englund A three-dimensional evaluation of a laser scanner and a touch-probe scanner J Prosthet Dent 95 2006 194 200 (Pubitemid 43388110)
20. S. Witkowski, F. Komine, and T. Gerds Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques J Prosthet Dent 96 2006 47 52 (Pubitemid 44109708)
21. P.L. Tan, D.G. Gratton, A.M. Diaz-Arnold, and D.C. Holmes An in vitro comparison of vertical marginal gaps of CAD/CAM titanium and conventional cast restorations J Prosthodont 17 2008 378 383
22. J.W. McLean, and J.A. von Fraunhofer The estimation of cement film thickness by an in vivo technique Br Dent J 131 1971 107 111
23. R.W. Bruce Evaluation of multiple unit castings for fixed partial dentures J Prosthet Dent 14 1964 828 843
24. G. de Oliveira Correa, G.E. Henriques, M.F. Mesquita, and L.C. Sobrinho Over-refractory casting technique as an alternative to one-piece multi-unit fixed partial denture frameworks J Prosthet Dent 95 2006 243 248 (Pubitemid 43388117)
25. T. Jemt Three-dimensional distortion of gold-alloy castings and welded titanium frameworks. Measurements of the precision of fit between completed implant prostheses and the master casts in routine edentulous situations J Oral Rehabil 22 1995 557 564
26. T. Traini, C. Mangano, R.L. Sammons, F. Mangano, A. Macchi, and A. Piattelli Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants Dent Mater 24 2008 1525 1533
27. T. Akova, Y. Ucar, A. Tukay, M.C. Balkaya, and W.A. Brantley Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain Dent Mater 24 2008 1400 1404
28. N. Samet, B. Resheff, S. Gelbard, and N. Stern A CAD/CAM system for the production of metal copings for porcelain-fused-to-metal restorations J Prosthet Dent 73 1995 457 463
29. C. Besimo, C. Jeger, and R. Guggenheim Marginal adaptation of titanium frameworks produced by CAD/CAM techniques Int J Prosthodont 10 1997 541 546 (Pubitemid 127500364)
30. B. Fransson, G. Oilo, and R. Gjeitanger The fit of metal-ceramic crowns, a clinical study Dent Mater 1 1985 197 199
31. T. Takahashi, and J. Gunne Fit of implant frameworks: an in vitro comparison between two fabrication techniques J Prosthet Dent 89 2003 256 260 (Pubitemid 37304969)
32. V.A. Marker, A.W. Miller, B.H. Miller, and J.H. Swepston Factors affecting the retention and fit of gold castings J Prosthet Dent 57 1987 425 430
33. E. Papazoglou, W. Brantley, and W. Johnston Evaluation of high-temperature distortion of high-palladium metal-ceramic crowns J Prosthet Dent 85 2001 133 140 (Pubitemid 33642442)