Micro-machinability of injection molded polyamide 6 polymer and glass-fiber reinforced polyamide 6 composite

Composites Part B: Engineering

Volumn 88, Issue , 2016, Pages 85-100

  Kuram, Emel ^a  

^a GEBZE TECHNICAL UNIVERSITY   (Turkey)

Author keywords

A. Glass fibres; B. Wear; E. Machining; Micro milling

Indexed keywords

ADHESION; AUTOMOTIVE INDUSTRY; FIBER REINFORCED PLASTICS; FIBERS; GLASS; GLASS FIBERS; INJECTION MOLDING; MICROMACHINING; MILLING (MACHINING); MILLING MACHINES; POLYMERS; REINFORCED PLASTICS; REINFORCEMENT; SURFACE ROUGHNESS; WEAR OF MATERIALS;

AEROSPACE AND AUTOMOTIVE INDUSTRIES; FIBER FAILURES; GLASS FIBER REINFORCED POLYAMIDES; GLASS-FIBER REINFORCED POLYMER COMPOSITES; MICRO MILLING; MICRO-MACHINABILITY; OUTPUT RESPONSE; WORKPIECE MATERIALS;

CUTTING TOOLS;

EID: 84949430133     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2015.11.004     Document Type: Article

References (93)

1. 3 composite Int J Adv Manuf Technol 68 2013 2489 2497
2. J. Ramkumar, S.K. Malhotra, and R. Krishnamurthy Studies on drilling of glass/epoxy laminates using coated high-speed steel drills Mater Manuf Process 17 2002 213 222
3. D. Kim, M. Ramulu, and X. Doan Influence of consolidation process on the drilling performance and machinability of PIXA-M and PEEK thermoplastic composites J Thermoplast Compos Mater 18 2005 195 217
4. K. Palanikumar, and J.P. Davim Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites Mater Des 28 2007 2008 2014
5. V. Krishnaraj, A. Prabukarthi, A. Ramanathan, N. Elanghovan, M.S. Kumar, R. Zitoune, and et al. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates Compos Part B 43 2012 1791 1799
6. J.P. Davim, and F. Mata Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis Ind Lubr Tribol 56 2004 270 274
7. K. Palanikumar, S. Prakash, and K. Shanmugam Evaluation of delamination in drilling GFRP composites Mater Manuf Process 23 2008 858 864
8. R.Q. Sardiñas, P. Reis, and J.P. Davim Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms Compos Sci Technol 66 2006 3083 3088
9. G. Caprino, and V. Tagliaferri Damage development in drilling glass fibre reinforced plastics Int J Mach Tools Manuf 35 1995 817 829
10. G.V.G. Rao, P. Mahajan, and N. Bhatnagar Micro-mechanical modeling of machining of FRP composites - cutting force analysis Compos Sci Technol 67 2007 579 593
11. A.T. Marques, L.M. Durão, A.G. Magalhães, J.F. Silva, and J.M.R.S. Tavares Delamination analysis of carbon fibre reinforced laminates: evaluation of a special step drill Compos Sci Technol 69 2009 2376 2382
12. P. Ervine, G.E. O'Donnell, and B. Walsh Fundamental investigations into burr formation and damage mechanisms in the micro-milling of a biomedical grade polymer Mach Sci Technol 19 2015 112 133
13. E.-S. Lee Precision machining of glass fibre reinforced plastics with respect to tool characteristics Int J Adv Manuf Technol 17 2001 791 798
14. K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites Mater Des 27 2006 862 871
15. N. Bhatnagar, D. Nayak, I. Singh, H. Chouhan, and P. Mahajan Determination of machining-induced damage characteristics of fiber reinforced plastic composite laminates Mater Manuf Process 19 2004 1009 1023
16. L.-B. Zhang, L.-J. Wang, and X.-Y. Liu A mechanical model for predicting critical thrust forces in drilling composite laminates Proc Inst Mech Eng Part B J Eng Manuf 215 2001 135 146
17. F. Lachaud, R. Piquet, F. Collombet, and L. Surcin Drilling of composite structures Compos Struct 52 2001 511 516
18. J.P. Davim, P. Reis, and C.C. António Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: influence of matrix (Viapal VUP 9731 and ATLAC 382-05) J Mater Process Technol 155-156 2004 1828 1833
19. U.A. Khashaba Delamination in drilling GFR-thermoset composites Compos Struct 63 2004 313 327
20. I. El-Sonbaty, U.A. Khashaba, and T. Machaly Factors affecting the machinability of GFR/epoxy composites Compos Struct 63 2004 329 338
21. S.R. Karnik, V.N. Gaitonde, J.C. Rubio, A.E. Correia, A.M. Abrão, and J.P. Davim Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model Mater Des 29 2008 1768 1776
22. K. Palanikumar Experimental investigation and optimisation in drilling of GFRP composites Measurement 44 2011 2138 2148
23. J.P. Davim, and P. Reis Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments Compos Struct 59 2003 481 487
24. S.-O. An, E.-S. Lee, and S.-L. Noh A study on the cutting characteristics of glass fiber reinforced plastics with respect to tool materials and geometries J Mater Process Technol 68 1997 60 67
25. M. Rahman, S. Ramakrishna, J.R.S. Prakash, and D.C.G. Tan Machinability study of carbon fiber reinforced composite J Mater Process Technol 89-90 1999 292 297
26. J.R. Ferreira, N.L. Coppini, and G.W.A. Miranda Machining optimisation in carbon fibre reinforced composite materials J Mater Process Technol 92-93 1999 135 140
27. J.P. Davim, P. Reis, V. Lapa, and C.C. António Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components Compos Struct 62 2003 67 73
28. J.P. Davim, and F. Mata A new machinability index in turning fiber reinforced plastics J Mater Process Technol 170 2005 436 440
29. K. Palanikumar, L. Karunamoorthy, and N. Manoharan Mathematical model to predict the surface roughness on the machining of glass fiber reinforced polymer composites J Reinf Plastics Compos 25 2006 407 419
30. J.P. Davim, and F. Mata New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools Mater Des 28 2007 1050 1054
31. A.N. Sait, S. Aravindan, and A.N. Haq Optimisation of machining parameters of glass-fibre-reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique Int J Adv Manuf Technol 43 2009 581 589
32. S. Kumar, P.S. Satsangi, and H.K. Sardana Optimization of surface roughness in turning unidirectional glass fiber reinforced plastics (UD-GFRP) composites using polycrystalline diamond (PCD) cutting tool Indian J Eng Mater Sci 19 2012 163 174
33. S.C. Lin, and I.K. Chen Drilling carbon fiber-reinforced composite material at high speed Wear 194 1996 156 162
34. W.-C. Chen Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates Int J Mach Tools Manuf 37 1997 1097 1108
35. D. Bhattacharyya, and D.P.W. Horrigan A study of hole drilling in kevlar composites Compos Sci Technol 58 1998 267 283
36. C. Murphy, G. Byrne, and M.D. Gilchrist The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials Proc Inst Mech Eng Part B J Eng Manuf 216 2002 143 152
37. J.P. Davim, and P. Reis Drilling carbon fiber reinforced plastics manufactured by autoclave- experimental and statistical study Mater Des 24 2003 315 324
38. G. Dini On-line prediction of delamination in drilling of GFRP by using a neural network approach Mach Sci Technol 7 2003 295 314
39. N. Bhatnagar, I. Singh, and D. Nayak Damage investigation in drilling of glass fiber reinforced plastic composite laminates Mater Manuf Process 19 2004 995 1007
40. J.P. Davim, P. Reis, and C.C. António Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up Compos Sci Technol 64 2004 289 297
41. V. Krishnaraj, S. Vijayarangan, and G. Suresh An investigation on high speed drilling of glass fibre reinforced plastic (GFRP) Indian J Eng Mater Sci 12 2005 189 195
42. N.S. Mohan, A. Ramachandra, and S.M. Kulkarni Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites Compos Struct 71 2005 407 413
43. I. Singh, and N. Bhatnagar Drilling of uni-directional glass fiber reinforced plastic (UD-GFRP) composite laminates Int J Adv Manuf Technol 27 2006 870 876
44. J.P. Davim, J.C. Rubio, and A.M. Abrao A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates Compos Sci Technol 67 2007 1939 1945
45. N.S. Mohan, S.M. Kulkarni, and A. Ramachandra Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials J Mater Process Technol 186 2007 265 271
46. A.M. Abrão, J.C.C. Rubio, P.E. Faria, and J.P. Davim The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite Mater Des 29 2008 508 513
47. I. Singh, N. Bhatnagar, and P. Viswanath Drilling of uni-directional glass fiber reinforced plastics: experimental and finite element study Mater Des 29 2008 546 553
48. J.C. Rubio, A.M. Abrao, P.E. Faria, A.E. Correia, and J.P. Davim Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor Int J Mach Tools Manuf 48 2008 715 720
49. V.N. Gaitonde, S.R. Karnik, J.C. Rubio, A.E. Correia, A.M. Abrão, and J.P. Davim Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites J Mater Process Technol 203 2008 431 438
50. J.C.C. Rubio, A.M. Abrão, P.E. Faria, A.E. Correia, and J.P. Davim Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP) J Compos Mater 42 2008 1523 1532
51. K. Palanikumar, J.C. Rubio, A.M. Abrao, A.E. Correia, and J.P. Davim Influence of drill point angle in high speed drilling of glass fiber reinforced plastics J Compos Mater 42 2008 2585 2597
52. B. Latha, and V.S. Senthilkumar Fuzzy rule based modeling of drilling parameters for delamination in drilling GFRP composites J Reinf Plastics Compos 28 2009 951 964
53. K. Palanikumar Modeling and analysis of delamination factor and surface roughness in drilling GFRP composites Mater Manuf Process 25 2010 1059 1067
54. V.H.C. De Albuquerque, J.M.R.S. Tavares, and L.M.P. Durão Evaluation of delamination damage on composite plates using an artificial neural network for the radiographic image analysis J Compos Mater 44 2010 1139 1159
55. J.C. Rubio, T.H. Panzera, A.M. Abrao, P.E. Faria, and J.P. Davim Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): statistical analysis of the roughness parameters J Compos Mater 45 2010 1395 1402
56. V.N. Gaitonde, S.R. Karnik, J.C. Rubio, A.E. Correia, A.M. Abrão, and J.P. Davim A study aimed at minimizing delamination during drilling of CFRP composites J Compos Mater 45 2011 2359 2368
57. S. Kumar, S.R. Chauhan, P.K. Rakesh, I. Singh, and J.P. Davim Drilling of glass fiber/vinyl ester composites with fillers Mater Manuf Process 27 2012 314 319
58. T.J. Grilo, R.M.F. Paulo, C.R.M. Silva, and J.P. Davim Experimental delamination analyses of CFRPs using different drill geometries Compos Part B 45 2013 1344 1350
59. J.P. Davim, P. Reis, and C.C. António A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA) Compos Struct 64 2004 493 500
60. A.I. Azmi, R.J.T. Lin, and D. Bhattacharyya Experimental study of machinability of GFRP composites by end milling Mater Manuf Process 27 2012 1045 1050
61. A.I. Azmi, R.J.T. Lin, and D. Bhattacharyya Machinability study of glass fibre-reinforced polymer composites during end milling Int J Adv Manuf Technol 64 2013 247 261
62. V.G. Dhokia, S. Kumar, P. Vichare, S.T. Newman, and R.D. Allen Surface roughness prediction model for CNC machining of polypropylene Proc Inst Mech Eng Part B J Eng Manuf 222 2008 137 153
63. H.Y. Puw, and H. Hocheng Machinability test of carbon fiber-reinforced plastics in milling Mater Manuf Process 8 1993 717 729
64. W. Hintze, D. Hartmann, and C. Schütte Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs) - an experimental study Compos Sci Technol 71 2011 1719 1726
65. J.P. Davim, and P. Reis Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments J Mater Process Technol 160 2005 160 167
66. M.R. Razfar, and M.R.Z. Zadeh Optimum damage and surface roughness prediction in end milling glass fibre-reinforced plastics, using neural network and genetic algorithm Proc Inst Mech Eng Part B J Eng Manuf 223 2009 653 664
67. A.I. Azmi, R.J.T. Lin, and D. Bhattacharyya Tool wear prediction models during end milling of glass fibre-reinforced polymer composites Int J Adv Manuf Technol 67 2013 701 718
68. K. Ogawa, E. Aoyama, H. Inoue, T. Hirogaki, H. Nobe, Y. Kitahara, and et al. Investigation on cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wall) Compos Struct 38 1997 343 350
69. H. Inoue, E. Aoyama, T. Hirogaki, K. Ogawa, H. Matushita, Y. Kitahara, and et al. Influence of tool wear on internal damage in small diameter drilling in GFRP Compos Struct 39 1997 55 62
70. H. Endo, and E. Marui Small-hole drilling in engineering plastics sheet and its accuracy estimation Int J Mach Tools Manuf 46 2006 575 579
71. J.P. Davim, L.R. Silva, A. Festas, and A.M. Abrao Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing Mater Des 30 2009 228 234
72. M. Mahmoodi Electrical, thermal, and machining behaviour of injection moulded polymeric CNT nanocomposites [Ph.D. thesis] 2013 University of Calgary
73. P.-C. Chen, C.-W. Pan, W.-C. Lee, and K.-M. Li An experimental study of micromilling parameters to manufacture microchannels on a PMMA substrate Int J Adv Manuf Technol 71 2014 1623 1630
74. F. Jiao, and K. Cheng An experimental investigation on micro-milling of polymethyl methacrylate components with nanometric surface roughness Proc Inst Mech Eng Part B J Eng Manuf 228 2014 790 796
75. E. Kuram, E. Tasci, A.I. Altan, M.M. Medar, F. Yilmaz, and B. Ozcelik Investigating the effects of recycling number and injection parameters on the mechanical properties of glass-fibre reinforced nylon 6 using Taguchi method Mater Des 49 2013 139 150
76. J.P. Davim, and F. Mata A comparative evaluation of the turning of reinforced and unreinforced polyamide Int J Adv Manuf Technol 33 2007 911 914
77. V.N. Gaitonde, S.R. Karnik, F. Mata, and J.P. Davim Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides J Reinf Plastics Compos 27 2008 909 924
78. V.N. Gaitonde, S.R. Karnik, F. Mata, and J.P. Davim Study on some aspects of machinability in unreinforced and reinforced polyamides J Compos Mater 43 2009 725 739
79. V.N. Gaitonde, S.R. Karnik, F. Mata, and J.P. Davim Modeling and analysis of machinability characteristics in PA6 and PA66 GF30 polyamides through artificial neural network J Thermoplast Compos Mater 23 2010 313 336
80. V.N. Gaitonde, S.R. Karnik, J.C. Rubio, A.M. Abrão, A.E. Correia, and J.P. Davim Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides J Compos Mater 46 2012 2659 2673
81. J.C.C. Rubio, L.J. da Silva, W. de Oliveira Leite, T.H. Panzera, S.L.M.R. Filho, and J.P. Davim Investigations on the drilling process of unreinforced and reinforced polyamides using Taguchi method Compos Part B 55 2013 338 344
82. ISO 527:1997. Plastics - determination of tensile properties.
83. K. Palanikumar Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling Int J Adv Manuf Technol 36 2008 19 27
84. J.Y. Sheikh-Ahmad Machining of polymer composites 2009 Springer
85. A.I. Azmi Machinability study of fibre-reinforced polymer matrix composites [Ph.D. thesis] 2012 The University of Auckland
86. Q. Niu, M. Chen, W. Ming, and Q. An Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry condition Int J Adv Manuf Technol 64 2013 623 631
87. X. Tian, J. Zhao, Y. Dong, N. Zhu, J. Zhao, and A. Li A comparison between whisker-reinforced alumina and SiAlON ceramic tools in high-speed face milling of Inconel 718 Proc Inst Mech Eng Part B J Eng Manuf 228 2014 845 857
88. X. Tian, J. Zhao, J. Zhao, Z. Gong, and Y. Dong Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with sialon ceramic tools Int J Adv Manuf Technol 69 2013 2669 2678
89. H. Zhang, J. Zhao, F. Wang, J. Zhao, and A. Li Cutting forces and tool failure in high-speed milling of titanium alloy TC21 with coated carbide tools Proc Inst Mech Eng Part B J Eng Manuf 229 2015 20 27
90. J. Hou, W. Zhou, H. Duan, G. Yang, H. Xu, and N. Zhao Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy Int J Adv Manuf Technol 70 2014 1835 1845
91. D. Biermann, and M. Steiner Analysis of micro burr formation in austenitic stainless steel X5CrNi18-10, 45th CIRP conference on manufacturing systems 2012 Procedia CIRP 3 2012 97 102
92. G.K. Mathai, S.N. Melkote, and D.W. Rosen Effect of machining parameters on burr size of micromilled foils Proceedings of the 7th international conference on micromanufacturing March 11-14, 2012 216 223
93. R. Lekkala, V. Bajpai, R.K. Singh, and S.S. Joshi Characterization and modeling of burr formation in micro-end milling Precis Eng 35 2011 625 637