Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy

International Journal of Advanced Manufacturing Technology

Volumn 70, Issue 9-12, 2014, Pages 1835-1845

  Hou, Junzhan ^a,c   Zhou, Wei ^b   Duan, Hongjian ^a   Yang, Guang ^a   Xu, Hongwei ^a   Zhao, Ning ^c  

^a XI AN INSTITUTE OF APPLIED OPTICS   (China)

^b NANYANG TECHNOLOGICAL UNIVERSITY   (Singapore)

^c NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Cutting force; Cutting temperature; End milling; Titanium alloy; Tool wear

Indexed keywords

COATED CARBIDE TOOLS; CUTTING FORCES; CUTTING TEMPERATURE; END MILLING; HIGH SPEED MACHINING; MATERIAL REMOVAL RATE; MEAN FLANK TEMPERATURE; TOOL WEAR;

ABRASION; CARBIDE TOOLS; MILLING (MACHINING); PHYSICAL VAPOR DEPOSITION; TEMPERATURE MEASUREMENT; TITANIUM ALLOYS;

CUTTING;

EID: 84896709629     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-013-5433-8     Document Type: Article

References (37)

1. Boyer RR (1995) Titanium for aerospace: rationale and applications. Adv Perform Mater 2:349-368. doi: 10.1007/BF00705316
2. Peters M, Kumpfert J, Ward CH, Leyens C (2003) Titanium alloys for aerospace applications. Adv Eng Mater 5:419-427. doi: 10.1002/adem.200310095
3. Schauerte O (2003) Titanium in automotive production. Adv Eng Mater 5:411-418. doi: 10.1002/adem.200310094
4. Hartman AD, Gerdemann SJ, Hansen JS (1998) Producing lower-cost titanium for automotive applications. JOM 50:16-19. doi: 10.1007/s11837-998-0408-1
5. Treves C, Bruni S, Martinesi M, Stio M, Bacci T, Borgioli F (2005) Effects of surface treatment of Ti-6Al-4V titanium alloy on biocompatibility in cultured human umbilical vein endothelial cells. Acta Biomater 1:223-234. doi: 10.1016/j.actbio.2004.11.001
6. Yeung KWK, Wu SL, Zhao Y, Liu XM, Kao RYT, Luk KDK, Cheung KMC, Chu PK (2013) Antimicrobial effects of oxygen plasma modified medical grade Ti-6Al-4V alloy. Vacuum 89:271-279. doi: 10.1016/j.vacuum.2012.07.014
7. Rahman M, Wang ZG, Wong YS (2006) A review on high-speed machining of titanium alloys. JSME Int J 49:11-20. doi: 10.1299/jsmec.49.11
8. Ezugwu EO, Wang ZM (1997) Titanium alloys and their machinability - a review. J Mater Process Technol 68:262-274. doi: 10.1016/S0924-0136(96)00030-1
9. Hascalik A, Caydas U (2007) Electrical discharge machining of titanium alloy (Ti-6Al-4V). Appl Surf Sci 253:9007-9016. doi: 10.1016/j.apsusc.2007.05. 031
10. Molinari A, Musquar C, Sutter G (2002) Adiabatic shear banding in high speed machining of Ti-6Al-4V: experiments and modeling. Int J Plast 18:443-459. doi: 10.1016/S0749-6419(01)00003-1
11. Wang ZG, Rahman M, Wong YS, Neo KS, Sun J, Tan CH, Onozuka H (2009) Study on orthogonal turning of titanium alloys with different coolant supply strategies. Int J Adv Manuf Technol 42:621-632. doi: 10.1007/s00170-008-1627-x
12. Ribeiro MV, Moreira MRV, Ferreira JR (2003) Optimization of titanium alloy (6Al-4V) machining. J Mater Process Technol 143:458-463. doi: 10.1016/S0924-0136(03)00457-6
13. Hou JZ, Zhou W, Zhao N (2010) Effect of cutting parameters on ignition of AM50A Mg alloy during face milling. Mater Manuf Process 25:1048-1051. doi: 10.1080/10426910903496870
14. Hou JZ, Zhao N, Zhu SL (2011) Influence of cutting speed on flank temperature during face milling of magnesium alloy. Mater Manuf Process 26:1059-1063. doi: 10.1080/10426914.2010.536927
15. Oosthuizen GA, Akdogan G, Treurnicht N (2011) The performance of PCD tools in high-speed milling of Ti6Al4V. Int J Adv Manuf Technol 52:929-935. doi: 10.1007/s00170-010-2804-2
16. Siekmann HJ (1955) How to machine titanium. Tool Eng 34:78-82
17. Wang ZG, Rahman M, Wong YS (2005) Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys. Wear 258:752-758. doi: 10.1016/j.wear.2004.09.066
18. Bermingham MJ, Palanisamy S, Dargusch MS (2012) Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. Int J Mach Tools Manuf 62:76-87. doi: 10.1016/j.ijmachtools.2012.07.001
19. Rashid RAR, Sun S, Wang G, Dargusch MS (2012) An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. Int J Mach Tools Manuf 63:58-69. doi: 10.1016/j.ijmachtools.2012.06.004
20. Niu QL, Chen M, Ming WW, An QL (2013) Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry condition. Int J Adv Manuf Technol 64:623-631. doi: 10.1007/s00170-012-4043-1
21. Shi Q, Li L, He N, Zhao W, Liu XL (2013) Experimental study in high speed milling of titanium alloy TC21. Int J Adv Manuf Technol 64:49-54. doi: 10.1007/s00170-012-3997-3
22. Huang PL, Li JF, Sun J, Zhou J (2013) Vibration analysis in milling titanium alloy based on signal processing of cutting force. Int J Adv Manuf Technol 64:613-621. doi: 10.1007/s00170-012-4039-x
23. Wang ZG, Wong YS, Rahman M (2005) High-speed milling of titanium alloys using binderless CBN tools. Int J Mach Tools Manuf 45:105-114. doi: 10.1016/j.ijmachtools.2004.06.021
24. Sun S, Brandt M, Dargusch MS (2009) Characteristics of cutting forces and chip formation in machining of titanium alloys. Int J Mach Tools Manuf 49:561-568. doi: 10.1016/j.ijmachtools.2009.02.008
25. Li L, Chang H, Wang M, Zuo DW, He L (2004) Temperature measurement in high speed milling Ti6Al4V. Key Eng Mater 259-260:804-808. doi: 10.4028/www.scientific.net/KEM.259-260.804
26. Narutaki N, Murakoshi A, Motonishi S, Takeyama H (1983) Study on machining of titanium alloys. CIRP Ann Manuf Technol 32:65-69. doi: 10.1016/S0007-8506(07)63362-9
27. Kitagawa T, Kubo A, Maekawa K (1997) Temperature and wear of cutting tools in high-speed machining of inconel 718 and Ti-6Al-6V-2Sn. Wear 202:142-148. doi: 10.1016/S0043-1648(96)07255-9
28. Hood R, Aspinwall DK, Sage C, Voice W (2013) High speed ball nose end milling of gamma-TiAl alloys. Intermetallics 32:284-291. doi: 10.1016/j.intermet.2012.09.01
29. Muller B, Renz U, Hoppe S, Klocke F (2004) Radiation thermometry at a high-speed turning process. J Manuf Sci Eng Trans ASME 126:488-495. doi: 10.1115/1.1763188
30. Rao B, Dandekar CR, Shin YC (2011) An experimental and numerical study on the face milling of Ti-6Al-4V alloy: tool performance and surface integrity. J Mater Process Technol 211:294-304. doi: 10.1016/j.jmatprotec.2010.10.002
31. Wan ZP, Zhu YE, Liu HW, Tang Y (2012) Microstructure evolution of adiabatic shear bands and mechanisms of saw-tooth chip formation in machining Ti6Al4V. Mater Sci Eng A 531:155-163. doi: 10.1016/j.msea.2011.10.050
32. Li AH, Zhao J, Luo HB, Pei ZQ, Wang ZM (2012) Progressive tool failure in high-speed dry milling of Ti-6Al-4V alloy with coated carbide tools. Int J Adv Manuf Technol 58:465-478. doi: 10.1007/s00170-011-3408-1
33. Collective of authors (2004) Handbook of pyrometer. IMPAC Infrared GmbH, Germany
34. Che-Haron CH (2001) Tool life and surface integrity in turning titanium alloy. J Mater Process Technol 118:231-237. doi: 10.1016/S0924-0136(01)00926-8
35. Ginting A, Nouari M (2009) Surface integrity of dry machined titanium alloys. Int J Mach Tools Manuf 49:325-332. doi: 10.1016/j.ijmachtools.2008.10. 011
36. Li AH, Zhao J, Zhou YH, Chen XX, Wang D (2012) Experimental investigation on chip morphologies in high-speed dry milling of titanium alloy Ti-6Al-4V. Int J Adv Manuf Technol 62:933-942. doi: 10.1007/s00170-011-3854-9
37. Longbottom JM, Lanham JD (2006) A review of research related to Salomon's hypothesis on cutting speeds and temperatures. Int J Mach Tools Manuf 46:1740-1747. doi: 10.1016/j.ijmachtools.2005.12.001