Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): Statistical analysis of the roughness parameters

Journal of Composite Materials

Volumn 45, Issue 13, 2011, Pages 1395-1402

  Campos Rubio, J ^a   Panzera, T H ^b   Abrao, A M ^a   Faria, Paulo E ^a   Paulo Davim, J ^c  

^a FEDERAL UNIVERSITY OF MINAS GERAIS   (Brazil)

^b FEDERAL UNIVERSITY OF SÃO JOÃO DEL REI   (Brazil)

^c UNIVERSITY OF AVEIRO   (Portugal)

Author keywords

composites; drilling; HSM; polyamide; roughness parameter

Indexed keywords

AUTOMOTIVE APPLICATIONS; DRILL POINT; FEED SPEED; FULL FACTORIAL; HIGH MECHANICAL STRENGTH; HIGH SPEED DRILLING; HSM; MACHINING OPERATIONS; MACHINING PROCESS; MAIN EFFECT; POLYAMIDE COMPOSITE; ROUGHNESS PARAMETER; ROUGHNESS PARAMETERS; SPINDLE SPEED; WORK MATERIAL;

AMIDES; DRILLS; FIBER REINFORCED MATERIALS; GLASS FIBERS; MACHINING; MACHINING CENTERS; SURFACE ROUGHNESS; TUNGSTEN; TUNGSTEN CARBIDE;

SPEED;

AUTOMOTIVE ENGINES; COMPOSITES; DRILLING; GLASS FIBERS; POLYAMIDES; ROUGHNESS; TUNGSTEN CARBIDE; WHISKERING;

EID: 79958209371     PISSN: 00219983     EISSN: 1530793X     Source Type: Journal    
DOI: 10.1177/0021998310381540     Document Type: Article

References (22)

1. Callister WD Materials science and engineering: an introduction. New York: John Wiley & Sons, 2002.
2. Lee DG, Lee CS, Lee HG, Hwang HY and Kim JW Novel applications of composite structures to robots, machine tools and automobiles. Compos Struct 2004 ; 66 (1-4). 17-39. (Pubitemid 39102945)
3. Lindberg RA Process and materials of manufacture, 4 th ed. Boston: Allyn and Bacon, 1990.
4. Daniel IM and Ishai O. Engineering mechanics of composite materials. New York: Oxford University Press, 1994.
5. Davim JP and Mata FJ A comparative evaluation of the turning of reinforced and unreinforced polyamide. Int J Adv Manuf Technol 2007 ; 33: 911-914. (Pubitemid 47142833)
6. McCrum NG and Buckley CP Principles of polymer engineering, 2 nd ed. New York: Oxford University Press, 1997.
7. Mohan NS, Ramachandra A. and Kulkarni SM Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites. Compos Struct 2005 ; 71: 407-413. (Pubitemid 41715431)
8. Bhattacharyya D. and Horrigan DPW. A study of hole drilling in Kevlar composites. Compos Sci Technol 1998 ; 58: 267-283. (Pubitemid 28392476)
9. Khashaba UA Delamination in drilling GFR-thermoset composites. Compos Struct 2004 ; 63: 313-327. (Pubitemid 38070351)
10. Hocheng H. and Tsao CC Effects of special drill bits on drilling-induced delamination of composite materials. Int J Mach Tools Manuf 2006 ; 46 (12-13). 1403-1416. (Pubitemid 44119148)
11. Aoyama E., Nobe H. and Hirogaki T. Drilled hole damage of small diameter in printed wiring board. J Mater Process Technol 2001 ; 118: 436-441. (Pubitemid 33148022)
12. Davim JP, Campos Rubio JC and Abrão A. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 2007 ; 67: 1939-1945. (Pubitemid 46444623)
13. Palanikumar K., Karunamoorthy L. and Manoharan N. Mathematical model to predict the surface roughness on the machining of glass fiber reinforced polymer composites. J Reinf Plast Compos 2006 ; 25: 407-417.
14. Davim JP, Reis P., Lapa V. and Antonio CC Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for application in structural components. Compos Struct 2003 ; 62: 67-73. (Pubitemid 37002538)
15. Abrão AM, Faria PE, Campos Rubio J., Reis P. and Davim JP Drilling of fiber reinforced plastics: a review. J Mater Process Technol 2007 ; 186: 1-7. (Pubitemid 46330713)
16. Clark RL Jr, Craven MD and Kander RG Nylon 66/ poly(vinyl pyrrolidone) reinforced composites: 2 Bulk mechanical properties and moisture effects. Composites: Part A 1999 ; 30: 37-48.
17. Mummery L. Surface texture analysis: the handbook. Mühlhausen: Hommelwerke GmbH, 1992.
18. Montgomery DC Design and analysis of experiments. New York: John Wiley and Sons, 1991.
19. Wu CFJ and Hamada M. Experiments, planning, analysis and parameter design optimization. New York: John Wiley and Sons, 2000.
20. Campos Rubio J., Abrão AM, Faria PE, Correia AE and Davim JP Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP). J Compos Mater 2008 ; 42: 1523-1532.
21. Langella A., Nele L. and Maio A. A torque and thrust prediction model for drilling of composite materials. Composites: Part A 2005 ; 36: 83-93.
22. Velayudham A., Krishnamurthy R. and Soundarapandian T. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite. Int J Mach Tools Manuf 2005 ; 45: 399-406. (Pubitemid 40142533)