Evaluation of the performance of coated carbide tools in face milling TC6 alloy under dry condition

International Journal of Advanced Manufacturing Technology

Volumn 64, Issue 5-8, 2013, Pages 623-631

  Niu, Qiulin ^a   Chen, Ming ^a   Ming, Weiwei ^a   An, Qinglong ^a  

^a SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

Coating; CVD; Face milling; PVD; TC6

Indexed keywords

CARBIDE INSERTS; CHEMICAL VAPOR DEPOSITIONS (CVD); CHIP MORPHOLOGIES; COATED CARBIDE TOOLS; CUTTING FORCES; DRY CONDITION; FACE MILLING; FIVE-AXIS; HIGH-EFFICIENCY; KISTLER; LOW THERMAL CONDUCTIVITY; MACHINING PROCESS; MATERIAL PERFORMANCE; PROCESSING TECHNOLOGIES; PRODUCTION COST; PRODUCTION EFFICIENCY; PVD COATINGS; SPINDLE DRIVES; TC6; TOOL LIFE; TOOL WEAR; WEAR MECHANISMS;

ALLOYS; CHEMICAL VAPOR DEPOSITION; COATINGS; MILLING (MACHINING); PHYSICAL VAPOR DEPOSITION; SPRAYED COATINGS; SURFACE ROUGHNESS; TRIBOLOGY; VAPORS; WEAR OF MATERIALS;

TITANIUM ALLOYS;

EID: 84873712057     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-012-4043-1     Document Type: Article

References (30)

1. Che Haron CH, Ginting A, Arshad H (2007) Performance of alloyed uncoated and CVD-coated carbide tools in dry milling of titanium alloy Ti-6242S. J Mater Process Technol 185:77-82
2. Nouari M, Ginting A (2006) Wear characteristics and performance of multi-layer CVD-coated alloyed carbide tool in dry end milling of titanium alloy. Surf Coat Technol 200:5663-5676
3. López de lacalle LN, Pérez J, Llorente JI, Sánchez JA (2000) Advanced cutting conditions for the milling of aeronautical alloys. J Mater Process Technol 100:1-11
4. Astakhov VP (2006) Tribology of metal cutting. Elsevier, London
5. Ginting A, Nouari M (2009) Surface integrity of dry machined titanium alloys. Int J Mach Tools Manuf 49:325-332
6. Vargas Pérez RG (2005) Wear mechanisms of WC inserts in face milling of gamma titanium aluminides. Wear 259:1160-1167
7. Jawaid A, Sharif S, Koksal S (2000) Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy. J Mater Process Technol 99:266-274
8. Zhang HZ, Ming WW, Chen M, Han B, Rong B, Liu G, Zhang YS (2010) An investigation of the wear mechanism for carbide tools in face milling the Ti-5Al-4.75Mo-4.75 V-1Cr-1Fe alloy. Key Eng Mater 431-432:547-550
9. Beranoagirre A, Olvera D, López de Lacalle LN (2011) Milling of gamma titanium-aluminum alloys. Int J Adv Manuf Technol. doi: 10.1007/s00170-011-3812-6
10. Sharif S, Rahim EA (2007) Performance of coated- and uncoated-carbide tools when drilling titanium alloy - Ti-6Al4V. J Mater Process Technol 185:72-76
11. Guo GQ, Liu ZQ, An QL, Chen M (2011) Experimental investigation on conventional grinding of Ti-6Al-4 V using SiC abrasive. Int J Adv Manuf Technol 57:135-142
12. Zhang S, Li JF, Sun J, Jiang F (2010) Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4 V alloy. Int J Adv Manuf Technol 46:69-78
13. Li AH, Zhao J, Luo HB, Pei ZQ, Wang ZM (2012) Progressive tool failure in high-speed dry milling of Ti-6Al-4 V alloy with coated carbide tools. Int J Adv Manuf Technol 58:465-478
14. Venugopal KA, Paul S, Chattopadhyay AB (2007) Tool wear in cryogenic turning of Ti-6Al-4V alloy. Cryogenics 47:12-18
15. Niu QL, Cai XJ, Liu ZQ, Chen M, An QL (2012) Wear behavior of carbide inserts in face milling TA19 alloy. Adv Mater Res 426:339-343
16. Pei CH, Fan QB, Cai HN, Li JC (2010) High temperature deformation behavior of the TC6 titanium alloy under the uniform DC electric field. J Alloys Compd 489:401-407
17. Li XL, Li MQ, Zhu DS, Xiong AM (2005) Deformation behavior of TC6 alloy in isothermal forging. J Mater Eng Perform 14(5):671-676
18. Zhao H, Yuan ZJ, Lu ZS, Zhuang FT, Fu WZ, Xiao B (2000) Numerical control milling for aeroengine integrated impeller of TC6 titanium alloy. J Propul Technol 21(3):83-85 (in Chinese)
19. Ming WW, Chen M, Rong B, Han B (2010) Machinability evaluation of the finish hard turning α+β titanium alloys. Key Eng Mater 431-432:551-554
20. Benardos PG, Vosniakos GC (2002) Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments. Rob Comput Integr Manuf 18:343-354
21. Fuh KH, Wu CF (1995) A proposed statistical model for surface quality prediction in end milling of Al alloy. Int J Mach Tools Manuf 35(8):1187-1200
22. Sun S, Brandt M, Dargusch MS (2009) Characteristics of cutting forces and chip formation in machining of titanium alloys. Int J Mach Tools Manuf 49:561-568
23. 3+TiC mixed oxide tool ceramics for dry on high speed cutting processes. J Mater Process Technol 164-165:822-831
24. Vikram Kumar CHR, Kesavan Nair P, Ramamoorthy B (2008) Characterization of multilayer pvd nanocoatings deposited on tungsten carbide cutting tools. Int J Adv Manuf Technol 38:622-629
25. Davim JP (2008) Machining: fundamentals and recent advances. Springer, London
26. dos Santos JABO, Sales WF, Santos SC, Machado AR, da Silva MB, Bonney J, Ezugwu EO (2007) Tribological evaluation of TiN and TiAlN coated PM-HSS gear cutter when machining 19MnCr5 steel. Int J Adv Manuf Technol 31:629-637
27. Khrais SK, Lin YJ (2007) Wear mechanisms and tool performance of TiAlN PVD coated inserts during machining of AISI 4140 steel. Wear 262:64-69
28. Chen RY (2002) Metal cutting principles, 2nd edn. Machinery Industry Press, Beijing (in Chinese)
29. Lim CYH, Lim SC, Lee KS (2000) Crater wear mechanisms of TiN coated high speed steel tools. Surf Eng 16(3):253-256
30. Sun K, Wang FC, Cheng XW, Miao P, Zhao SZ (2009) Formation mechanics of adiabatic shear band for the different microstructures of TC6 alloy. Rare Met Mater Eng 38(1):34-37 (in Chinese)