Deformation behavior of sintered nanocrystalline silver layers

Acta Materialia

Volumn 97, Issue , 2015, Pages 116-123

  Zabihzadeh, S ^a,b   Van Petegem, S ^a   Duarte, L I ^c   Mokso, R ^a   Cervellino, A ^a   Van Swygenhoven, H ^a,b  

^a PAUL SCHERRER INSTITUTE   (Switzerland)

^b EPFL   (Switzerland)

^c ABB CORPORATE RESEARCH   (Switzerland)

Author keywords

Microstructure; Nanoporous; Recovery; Tensile behavior; X ray diffraction

Indexed keywords

DEFORMATION; MICROSTRUCTURE; NANOCRYSTALS; RECOVERY; SILVER; TEMPERATURE; X RAY DIFFRACTION;

CYCLIC DEFORMATIONS; DEFORMATION BEHAVIOR; MECHANICAL BEHAVIOR; NANO-POROUS; NANOCRYSTALLINE SILVER; PEAK PROFILE ANALYSIS; PRESSURE ASSISTED SINTERING; TENSILE BEHAVIORS;

SINTERING;

EID: 84938064954     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2015.06.040     Document Type: Article

References (34)

1. M.M. Bakran, and H.G. Eckel Evolution of IGBT converters for mass transit applications Scr. Mater. 3 2000 1930 1935
2. M. Knoerr, S. Kraft, A. Schletz, Reliability assessment of sintered nano-silver die attachment for power semiconductors, in: 12th Electron. Packag. Technol. Conf. EPTC, 2010, pp. 56-61.
3. V. Sivasubramaniam, N.S. Bosco, J. Janczak-Rusch, J. Cugnoni, and J. Botsis Interfacial intermetallic growth and strength of composite lead-free solder alloy through isothermal aging J. Electron. Mater. 37 2008 1598 1604
4. C. Göbl, J. Faltenbacher, Low temperature sinter technology die attachment for power electronic applications, in: 6th Int. Conf. Integr. Power Electron. Syst. CIPS, 2010, pp. 1-5.
5. M. Knoerr, A. Schletz, Power semiconductor joining through sintering of silver nanoparticles: evaluation of influence of parameters time, temperature and pressure on density, strength and reliability, in: 6th Int. Conf. Integr. Power Electron. Syst. CIPS, 2010, pp. 1-6.
6. R. Khazaka, L. Mendizabal, and D. Henry Review on joint shear strength of nano-silver paste and its long-term high temperature reliability J. Electron. Mater. 43 2014 2459 2466
7. K.S. Siow Are sintered silver joints ready for use as interconnect material in microelectronic packaging? J. Electron. Mater. 43 2014 947 961
8. E. Ide, S. Angata, A. Hirose, and K.F. Kobayashi Metal-metal bonding process using Ag metallo-organic nanoparticles Acta Mater. 53 2005 2385 2393
9. J.G. Bai, Z.Z. Zhang, J.N. Calata, and G.-Q. Lu Low-temperature sintered nanoscale silver as a novel semiconductor device-metallized substrate interconnect material IEEE Trans. Compon. Packag. Technol. 29 2006 589 593
10. R.L. Coble Sintering crystalline solids. I. Intermediate and final state diffusion models J. Appl. Phys. 32 1961 787 792
11. J. Choe, J.N. Calat, and G.-Q. Lu Constrained-film sintering of a gold circuit paste J. Mater. Res. 04 1995 986 994
12. V.V. Polyakov, A.V. Egorov, and A.A. Lependin Modeling plastic deformation and fracture of porous materials Tech. Phys. Lett. 31 2005 140 142
13. G. Lu, G.Q. (Max) Lu, and Z.M. Xiao Mechanical properties of porous materials J. Porous Mater. 6 1999 359 368
14. D.J. Yu, X. Chen, G.Q. Chen, G. Lu, and Z.-Q. Wang Applying Anand model to low-temperature sintered nanoscale silver paste chip attachment Mater. Des. 30 2009 4574 4579
15. H.S. Tanvir Ahmed, and Alan F. Jankowski The mechanical strength of submicron porous silver foils Surf. Coat Technol. 204 2009 1026 1029
16. H.S. Tanvir Ahmed, and Alan F. Jankowski Stiffening of sub-micro-porous silver membranes under tensile deformation Mater. Sci. Eng. B 177 2012 43 47
17. X. Li, G. Chen, X. Chen, G.-Q. Lu, L. Wang, and Y.-H. Mei Mechanical property evaluation of nano-silver paste sintered joint using lap-shear test Solder. Surf. Mt. Technol. 24 2012 120 126
18. K.S. Siow Mechanical properties of nano-silver joints as die attach materials J. Alloys Compd. 514 2012 6 19
19. M. Stampanoni, R. Mokso, F. Marone, J. Vila-Comamala, S. Gorelick, P. Trtik, K. Jefimovs, and C. David Phase-contrast tomography at the nanoscale using hard x rays Phys. Rev. B 81 2010 140105-1 140105-4
20. M. Doube, M.M. Kłosowski, I. Arganda-Carreras, F.P. Cordelières, R.P. Dougherty, J.S. Jackson, B. Schmid, J.R. Hutchinson, and S.J. Shefelbine BoneJ: free and extensible bone image analysis in ImageJ Bone 47 2010 1076 1079
21. T. Hildebrand, and P. Rüegsegger A new method for the model-independent assessment of thickness in three-dimensional images J. Microsc. 185 1997 67 75
22. S. Bolte, and F.P. Cordelières A guided tour into subcellular colocalization analysis in light microscopy J. Microsc. 224 2006 213 232
23. I. Arganda-Carreras, R. Fernández-González, A. Muñoz-Barrutia, and C. Ortiz-De-Solorzano 3D reconstruction of histological sections: application to mammary gland tissue Microsc. Res. Tech. 73 2010 1019 1029
24. H. Van Swygenhoven, B. Schmitt, P.M. Derlet, S. Van Petegem, A. Cervellino, Z. Budrovic, S. Brandstetter, A. Bollhalder, and M. Schild Following peak profiles during elastic and plastic deformation: a synchrotron-based technique Rev. Sci. Instrum. 77 2006 013902
25. H. Van Swygenhoven, and S. Van Petegem In-situ mechanical testing during X-ray diffraction Mater. Charact. 78 2013 47 59
26. S. Brandstetter, P.M. Derlet, S. Van Petegem, and H. Van Swygenhoven Williamson-Hall anisotropy in nanocrystalline metals: X-ray diffraction experiments and atomistic simulations Acta Mater. 56 2008 165 176
27. A.D. Albert, M.F. Becker, J.W. Keto, and D. Kova Low temperature, pressure-assisted sintering of nanoparticulate silver films Acta Mater. 56 2008 1820 1829
28. Y. Mei, G. Chen, Y. Cao, X. Li, D. Han, and X. Chen Simplification of low-temperature sintering nanosilver for power electronics packaging J. Electron. Mater. 42 2013 1209 1218
29. B.E. Warren X-Ray Diffraction 1968 Addison-Wesley Reading Massachusetts
30. H. Van Swygenhoven, and J.R. Weertman Deformation in nanocrystalline metals Mater. Today 9 2006 24 31
31. R.W. Armstrong Engineering science aspects of the Hall-Petch relation Acta Mech. 225 2014 1013 1028
32. L.J. Gibson, and M. Ashby Cellular Solids: Structure and Properties second ed. 1997 Cambridge University Press Cambridge, UK
33. A.M. Hodge, J. Biener, J.R. Hayes, P.M. Bythrow, C.A. Volkert, and A.V. Hamza Scaling equation for yield strength of nanoporous open-cell foams Acta Mater. 55 2007 1343 1349
34. R.J. Asaro, and S. Suresh Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins Acta Mater. 53 2005 3369 3382