Some innovative surface texturing techniques for tribological purposes

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 229, Issue 4, 2015, Pages 429-448

  Costa, H L ^a   Hutchings, I M ^b  

^a FEDERAL UNIVERSITY OF UBERLÂNDIA   (Brazil)

^b UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

electrochemical texturing; ink jet printing; photochemical texturing hydrodynamic lubrication; starvation; Surface texturing

Indexed keywords

COST EFFECTIVENESS; ETCHING; HYDRODYNAMICS; INK; TEXTURES; TRIBOLOGY;

HYDRODYNAMIC LUBRICATION; INNOVATIVE METHOD; PHYSICAL PRINCIPLES; STARVATION; STARVED LUBRICATION; SURFACE-TEXTURING; TRIBOLOGICAL APPLICATIONS; TRIBOLOGICAL EVALUATIONS;

INK JET PRINTING;

EID: 84925459558     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650114539936     Document Type: Article

References (107)

1. Bruzzone AAG, et al. Advances in engineered surfaces for functional performance. Cirp Ann-Manuf Technol. 2008 ; 57: 750-769
2. Gachot C, et al. Dry friction between laser-patterned surfaces: role of alignment, structural wavelength and surface chemistry. Trib Lett 2013; 49: 193-202.
3. Rapoport L, et al. Friction and wear of MoS(2) films on laser textured steel surfaces. Surf Coat Technol. 2008 ; 202: 3332-3340
4. Costa HL, Hutchings IM. Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int. 2008 ; 40: 1227-1238
5. Etsion I, Kligerman Y, Halperin G. Analytical and experimental investigation of laser-textured mechanical seal faces. Tribol Trans. 1999 ; 42: 511-516
6. Rahmani R, et al. An analytical approach for analysis and optimisation of slider bearings with infinite width parallel textures. Tribol Int 2010; 43: 1551-1565.
7. Ma C and Zhu H. An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication. Tribol Int 2011; 44: 987-995.
8. Etsion I. State of the art in laser surface texturing. J Tribol Trans ASME. 2005 ; 127: 248-253
9. Papadopoulos CI, et al. Geometry optimization of textured three-dimensional micro-thrust bearings. J Trib-Trans ASME 2011; 133: 041702.
10. Ryk G, Etsion I. Testing piston rings with partial laser surface texturing for friction reduction. Wear. 2006 ; 261: 792-796
11. Krupka I, et al. Effect of surface texturing on elastohydrodynamically lubricated contact under transient speed conditions. Tribol Int. 2011 ; 44: 1144-1150
12. Mourier L, et al. Lubrication mechanisms with laser-surface-textured surfaces in elastohydrodynamic regime. Proc IMechE, Part J: J Engineering Tribology. 2010 ; 224: 697-711
13. Costa HL, Hutchings IM. Effects of die surface patterning on lubrication in strip drawing. J Mater Process Tech. 2009 ; 209: 1175-1180
14. Pettersson U, Jacobson S. Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribol lett. 2004 ; 17: 553-559
15. Zumgahr KH, Mathieu M, Brylka B. Friction control by surface engineering of ceramic sliding pairs in water. Wear. 2007 ; 263: 920-929
16. Fowell MT, et al. Parametric study of texturing in convergent bearings. Tribol Int 2012; 52: 7-16.
17. Ausas RF, Jai M, Buscaglia GC. A mass-conserving algorithm for dynamical lubrication problems with cavitation. J Tribol Trans ASME. 2009 ; 131: 031702-031702
18. Ryk G, Kligerman Y, Etsion I. Experimental investigation of laser texturing for reciprocating automotive engines. Tribol Trans. 2002 ; 45: 444-449
19. Lugt PM, Morales-Espejel GE. A review of elasto-hydrodynamic lubrication theory. Tribol Trans. 2011 ; 54: 470-496
20. Chiu YP. Analysis and prediction of lubricant film starvation in rolling contact systems. ASLE Trans. 1974 ; 17: 22-35
21. Guangteng G, Cann PM and Spikes HA. A study of parched lubrication. Wear 1992; 153: 91-105.
22. Cho MH, Park S. Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding. Tribol Int. 2011 ; 44: 859-867
23. Shinkarenko A, Kligerman Y, Etsion I. The effect of elastomer surface texturing in soft elasto-hydrodynamic lubrication. Tribol lett. 2009 ; 36: 95-103
24. Dumitru G, et al. Laser microstructuring of steel surfaces for tribological applications. Appl Phys A. 2000 ; 70: 485-487
25. Geiger M, Roth S, Becker W. Influence of laser-produced microstructures on the tribological behaviour of ceramics. Surf Coat Technol. 1998 ; 100-101: 17-22
26. Semaltianos NG, et al. Femtosecond laser surface texturing of a nickel-based superalloy. Appl Surf Sci. 2008 ; 255: 2796-2802
27. Vincent C, et al. Control of the quality of laser surface texturing. Microsyst Technol Micro Nanosyst Inform Storage Process Syst. 2008 ; 14: 1553-1557
28. Gao YB, et al. A two-step nanosecond laser surface texturing process with smooth surface finish. Appl Surf Sci. 2011 ; 257: 9960-9967
29. Kong MC, et al. On the relationship between the dynamics of the power density and workpiece surface texture in pulsed laser ablation. Cirp Ann-Manuf Technol. 2012 ; 61: 203-206
30. Duarte M, et al. Increasing lubricant film lifetime by grooving periodical patterns using laser interference metallurgy. Adv Eng Mater. 2008 ; 10: 554-558
31. Kalvala PR, Beesabathina DP and Wiedemann KE. Process for forming a wear-resistant coating that minimizes debris. Patent 5,955,145, Analytical Services & Mat. Inc., USA, USPTO 1999.
32. Deng T, et al. Fabrication of metallic microstructures using exposed, developed silver halide-based photographic film. Anal Chem. 2000 ; 72: 645-651
33. Nelson JB, Schwartz DT. Electrochemical printing: in situ characterization using an electrochemical quartz crystal microbalance. J Micromech Microeng. 2005 ; 15: 2479-2484
34. Budinsky KG Surface engineering for wear resistance. New York: Prentice Hall ; 1988: 44-77.
35. Xia Y, Whitesides GM. Soft lithography. Angew Chem Int Ed. 1998 ; 37: 550-575
36. Vaeth KM, et al. Use of μCP for generating selectively grown films of poly(p-phenylene vinylene) and parylenes prepared by CVD. Langmuir. 2000 ; 16: 8495-8500
37. Wang HY, et al. Fabrication and electron field-emission of carbon nanofibers grown on silicon nanoporous pillar array. Appl Surf Sci. 2012 ; 261: 219-222
38. Hupp SJ, Hart DP In: World tribology congress III. Washington: ASME ; 2005:
39. Bartz M, et al. Stamping of monomeric SAMs as a route to structured crystallisation templates: patterned titania films. Chem Eur J. 2000 ; 6: 4149-4153
40. Mott M, Evans JRG. Zirconia/alumina functionally graded material made by ceramic ink jet printing. Mater Sci Eng A. 1999 ; 271: 344-352
41. Snell D, Coombs A. Novel coating technology for non-oriented electrical steels. J Magn Magn Mater. 2000 ; 215-216: 133-135
42. Daniel JH, Moore DF, Walker JF. Focused ion beams and silicon-on-insulator - a novel approach to MEMS. Smart Mater Struct. 2000 ; 9: 284-290
43. Hua M, et al. Patterned PVD TiN spot coatings on M2 steel: tribological behaviors under different sliding speeds. Wear. 2006 ; 260: 1153-1165
44. Zou M, Cai L, Wang H. Adhesion and friction studies of a nano-textured surface produced by spin coating of colloidal silica nanoparticle solution. Tribol Lett. 2006 ; 21: 25-30
45. Wuhrer R, Yeung WY. Grain refinement with increasing magnetron discharge power in sputter deposition of nanostructured titanium aluminium nitride coatings. Scripta Materialia. 2004 ; 50: 813-818
46. Lejeune M, et al. Ink-jet printing of ceramic micro-pillar arrays. J Eur Ceram Soc. 2009 ; 29: 905-911
47. Hutchings IM, Martin GD Inkjet technology for digital fabrication. Chichester, UK: John Wiley ; 2013:
48. Pawelski O, et al. The influence of different work-roll texturing systems on the development of surface structure in the temper rolling process of steel sheet used in the automotive industry. J Mater Process Technol. 1994 ; 45: 215-222
49. Sheu S, Hector LG Jr. Tool surface topographies for controlling friction and wear in metal-forming processes. Trans ASME, J Tribol. 1998 ; 120: 517-527
50. Mailis S, et al. Etching and printing of diffractive optical microstructures by a femtosecond excimer laser. Appl Opt. 1999 ; 38: 2303-2308
51. Wakuda M, et al. Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact. Wear. 2003 ; 254: 356-363
52. Fu YH, et al. The technology of laser honing applied in distinctively improving the lubrication of frictional units. Key Eng Mater. 2001 ; 202-203: 265-270
53. Aspinwall DK, et al. Electrical discharge texturing. J Mach Tools Manuf. 1992 ; 32: 183-193
54. De Soete D, Pans D, Steinhoff K. EBT technology and its applications. Iron Steel Eng. 1997 ; 74: 36-40
55. Langford RM, et al. Focused ion beam micromachining of three-dimensional structures and three-dimensional reconstruction to assess their shape. J Micromech Microeng. 2002 ; 12: 111-114
56. Chae YH Mechanical behavior of materials X, parts 1 and 2. Nam SW, ed. Stafa-Zurich: Trans Tech Publications Ltd ; 2007: 765-768.
57. Zhang JY, Meng YG. A study of surface texturing of carbon steel by photochemical machining. J Mater Process Technol. 2012 ; 212: 2133-2140
58. Leyendecker R and Heinke G. Method and apparatus for reducing fretting wear between relatively moving parts. Patent 3,976,342, Robert Bosch G.m.b.H, USA, USPTO 1976.
59. Schonenberger I, Roy S. Microscale pattern transfer without photolithography of substrates. Electrochimica Acta. 2005 ; 51: 809-819
60. Shinkarenko A, Kligerman Y, Etsion I. The validity of linear elasticity in analyzing surface texturing effect for elastohydrodynamic lubrication. J Tribol-Trans ASME. 2009 ; 131: 021503-021503
61. Bowden N, et al. Self-assembly of mesoscale objects into ordered two-dimensional arrays. Science. 1997 ; 276: 232-235
62. Ishibashi K. Methods for treating the surface of a solid body. Patent 5,198,073, USA, USPTO 1993.
63. Srinivasarao M, et al. Three-dimensionally ordered array of air bubbles in a polymer film. Science. 2001 ; 292: 79-83
64. Melcher RL, Romankiw LT and Von Gutfeld RJ. Method for maskless chemical machining. Patent 4,379,022, IBM, USA, USPTO 1983.
65. Tian H, Saka N, Suh NP. Boundary lubrication studies on undulated titanium surfaces. Tribol Trans. 1989 ; 32: 289-296
66. Li L, Chai DM. The research and application of honing technology. Key Eng Mater. 2001 ; 202-203: 385-388
67. Nguyen TA, Butler DL. Simulation of precision grinding process, part 1: generation of the grinding wheel surface. Int J Mach Tools Manuf. 2005 ; 45: 1321-1328
68. Tian H, Chao AM. Optimization of disk surface texturing and lubrication on CSS performance. IEEE Trans Magnet. 1996 ; 32: 3666-3668
69. Gordon N, Starosvetsky D, Ein-Eli Y. Negative potential dissolution (NPD)-advanced and rapid texturing method of as-cut silicon. Electrochimica Acta. 2005 ; 50: 5313-5321
70. Cooper CV, Holiday P, Matthews A. The effect of tin interlayers on the indentation behavior of diamond-like carbon-films on alloy and compound substrates. Surf Coat Technol. 1994 ; 63: 129-134
71. Costa HL, Hutchings IM. Development of a maskless electrochemical texturing method. J Mater Process Technol. 2009 ; 209: 3869-3878
72. Zhu D, et al. Model-based virtual surface texturing for concentrated conformal-contact lubrication. Proc IMechE, Part J: J Engineering Tribology. 2010 ; 224: 685-696
73. Slikkerveer PJ, Veld FH. Model for patterned erosion. Wear. 1999 ; 233-235: 377-386
74. Mastud S, et al. Experimental characterization of vibration-assisted reverse micro electrical discharge machining (EDM) for surface texturing. Proc ASME Int Manuf Sci Eng Conf. 2012 ; 2012: 439-448
75. Byun JW, et al. Surface texturing by micro ECM for friction reduction. Int J Precis Eng Manuf. 2010 ; 11: 747-753
76. Stutzmann N, et al. Patterning of polymer-supported metal films by microcutting. Nature. 2000 ; 407: 613-616
77. Heuberger M, et al Boundary and mixed lubrication: science and applications,. Dowson D, ed. 2002: 67-73. Elsevier.
78. Bulatov VP, Krasny VA, Schneider YG. Basics of machining methods to yield wear- and fretting-resistive surfaces, having regular roughness patterns. Wear. 1997 ; 208: 132-137
79. Dos Santos DS, et al. The role of azopolymer/dendrimer layer-by-layer film architecture in photoinduced birefringence and the formation of surface-relief gratings. Langmuir. 2006 ; 22: 6177-6180
80. Okamoto T, et al. Ultraviolet-cured polymer microlens arrays. Appl Opt. 1999 ; 38: 2991-2996
81. De Mello JDB, Goncalves JL, Costa HL. Influence of surface texturing and hard chromium coating on the wear of steels used in cold rolling mill rolls. Wear. 2013 ; 302: 1295-1309
82. Steinhoff K, Kapoor A, Guillon N. Controlled wear as mechanism for the design of geometrically defined nanometric surface structures on forming tools. Adv Technol Plast. 1999 ; 1: 265-270
83. Fletcher DI, et al. Wear behaviour and surface form evaluation of a novel titanium carbide implanted surface under lubricated conditions. Proc Inst Mech Engrs. 2000 ; 214: 597-610
84. Costa HL, et al. Alternative methods for surface texturing. In: 1st international Brazilian conference on tribology, Rio de Janeiro, Brazil, ABM, 24-26 November 2010, pp.221-233.
85. Gutierrez-Mora F, et al. Dry and oil-lubricated sliding wear of Si3N4 and Si3N4/BN fibrous monoliths. Tribol Lett. 2005 ; 18: 231-237
86. McGillis DA VLSI technology. Sze SM, ed. McGrawHill ; 1983: 267-302.
87. Pardo DA. Application of screen printing in the fabrication of organic light-emitting devices. Adv Mater. 2000 ; 12: 1249-1252
88. Vicenzi D. Low power thick-film gas sensor obtained by a combination of screen-printing and micromachining techniques. Thin Solid Films. 2001 ; 391: 288-292
89. Leppavuori S, et al. A novel thick-film technique, gravure offset printing, for the realization of fine-line sensor structures. Sensors Actuators A. 1994 ; 41-42: 593-596
90. Michel B, et al. Printing meets lithography: soft approaches to high-resolution patterning. IBM J Res Dev. 2001 ; 45: 697-719
91. Darhuber AA, Wagner S. Physical mechanisms governing pattern fidelity in microscale offset printing. J Appl Phys. 2001 ; 90: 3602-3609
92. Rampelbe VH. Hot-stamping becomes economical for large areas. Mod Plast. 1970 ; 47: 112-114
93. Kumar AV, Dutta A. Electrophotographic layered manufacturing. J Manuf Sci Eng. 2004 ; 126: 571-576
94. Carlson CF and Heights J. Electrophotography. Patent 2,297,691, USPTO 1942.
95. Castrejon-Pita JR, et al. Future, opportunities and challenges of inkjet technologies. Atomization Spray. 2013 ; 23: 541-565
96. Costa HL Modification of surface topography: manufacturing methods and applications. PhD Thesis,. Engineering Department,: University of Cambridge, UK ; 2005: 240-240.
97. Marian VG, et al. Theoretical and experimental analysis of a laser textured thrust bearing. Tribol lett. 2011 ; 44: 335-343
98. Madou MJ Fundamentals of microfabrication (The science of miniaturization). 2 nd edn. Florida: CRC Press, 2002, pp. 723-723. Florida: CRC Press ; 2002: 723-723.
99. Vishnitsky A. Electrochemical rifling of gun barrels. Patent 4,690,737, Cation Corporation, USA, USPTO 1987.
100. Hao XQ, et al. Finite element analysis of a mask-less electrochemical texturing (MECT) method on metallic surface. Adv Sci Lett 2011; 4: 1394-1398.
101. Parreira JG, Gallo CA, Costa HL. New advances on maskless electrochemical texturing (MECT) for tribological purposes. Surf Coat Tech. 2012 ; 212: 1-13
102. James M. Photochemical machining by ink jet. A revolution in the making? In: NIP20: international conference on digital printing technologies, Salt Lake City, IS&T, 2004.
103. Muhl J, Alder GM. Direct printing of etch masks under computer control. Int J Mach Tools Manuf. 1995 ; 35: 333-337
104. Muhl J. Surface treatment of an object. Patent WO 95/23244, International Bureau, WIPO 1995.
105. de Gennes P-G, Brochard-Wyart F, Quéré D In: Capillarity and wetting phenomena: drops, bubbles, pearls, waves. Springer ; 2003: 216-226.
106. Costa HL and Hutchings IM. Ink-jet printing for patterning engineering surfaces. In: NIP24/digital fabrication: 24th international conference on digital printing technologies, Pittsburgh, PA, 7-12 September 2008.
107. Vilhena LM, et al. Surface texturing by pulsed Nd:YAG laser. Tribol Int. 2009 ; 42: 1496-1504