Dry friction between laser-patterned surfaces: Role of alignment, structural wavelength and surface chemistry

Tribology Letters

Volumn 49, Issue 1, 2013, Pages 193-202

  Gachot, Carsten ^a   Rosenkranz, Andreas ^a   Reinert, Leander ^a   Ramos Moore, Estéban ^a,c   Souza, Nicolas ^a   Müser, Martin H ^b   Mücklich, Frank ^a  

^a Saarland University Campus ^*  (Germany)

^b Julich Supercomputing Centre   (Germany)

^c PONTIFICIA UNIVERSIDAD CATÓLICA DE CHILE   (Chile)

Author keywords

Dry friction; Interlocking; Laser interference patterning

Indexed keywords

ATOMIC SCALE; AUSTENITIC STAINLESS; CONTACTING SURFACES; DRY FRICTION; DRY SLIDING; FRICTIONAL PROPERTIES; INTERLOCKING; LASER INTERFERENCE PATTERNING; LASER PATTERNING; LASER-TEXTURED; LENGTH SCALE; LINEAR PERIODIC ARRAYS; RELATIVE ORIENTATION; RUNNING-IN; SLIDING SURFACE; TRIBOMETERS;

AUSTENITIC STAINLESS STEEL; SUBSTRATES; SURFACE CHEMISTRY; TRIBOLOGY;

FRICTION;

EID: 84874474972     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-012-0057-y     Document Type: Article

References (41)

1. Bowden, F.P.; Tabor, D.: Mechanisms of metallic friction. Nature 150, 197-199 (1942)
2. Hirano, M.; Shinjo, K.; Kaneko, R.; Murata, Y.: Anisotropy of frictional forces in muscovite mica. Phys. Rev. Lett. 67, 2642-2645 (1991)
3. Dienwiebel, M.; et al.: Superlubricity of graphite. Phys. Rev. Lett. 62(126101), 1-4 (2004)
4. Sondhauß, J.; Fuchs, H.; Schirmeisen, A.: Frictional properties of a mesoscopic contact with engineered surface roughness. Tribol. Lett. 42, 319-324 (2011)
5. Urbakh, M.; Klafter, J.; Gourdon, D.; Israelachvili, J.: The nonlinear nature of friction. Nature 430, 525-528 (2004) (Pubitemid 38998619)
6. Willis, E.: Surface finish in relation to cylinder liners. Wear 109, 351-366 (1986)
7. Gerbig, Y.; Dumitru, G.; Romano, V.; Spassov, V.; Haefke, H.: Effects of laser texturing on technical surfaces. MRS Proc. 750, Y5.37 (2002)
8. Etsion, I.; Kligerman, Y.; Halperin, G.: Analytical and experimental investigation of laser-textured mechanical seal faces. Tribol. Trans. 42, 511-516 (1999) (Pubitemid 29527272)
9. Pettersson, U.; Jacobson, S.: Influence of surface texture on boundary lubricated sliding contacts. Tribol. Int. 36, 857-864 (2003)
10. Rapoport, L.; et al.: Wear life and adhesion of solid lubricant films on laser-textured steel surfaces. Wear 267, 1203-1207 (2009)
11. Li, J.; et al.: Effect of surface laser texture on friction properties of nickel-based composite. Tribol. Int. 43, 1193-1199 (2010)
12. Kelly, M.K.; et al.: High resolution thermal processing of semiconductors using pulsed-laser interference patterning. Phys. Stat. Sol. A 166, 651-657 (1998) (Pubitemid 128623285)
13. Mücklich, F.; et al.: Laser interference metallurgy-using interference as a tool for micro/nano structuring. Int. J. Mater. Res. 97, 1337-1344 (2006) (Pubitemid 44662337)
14. Sun, Z.; et al.: Two- and three-dimensional micro/nanostructure patterning of CdS - polymer nano composites with a laser interference technique and in situ synthesis. Nanotechnology 19(3), 1-8 (2008) (Pubitemid 351172076)
15. Huang, J.; et al.: Tunable surface texturing by polarization-controlled three-beam interference. J. Micromech. Microeng. 20, 1-6 (2010)
16. Daniel, C.; Mücklich, F.: Micro-structural characterization of laser interference irradiated Ni/Al multi-films. Appl. Surf. Sci. 242, 140-146 (2005) (Pubitemid 40086051)
17. Nebel, C.E.; et al.: Laser-interference crystallization of amorphous silicon - applications and properties. Phys. Stat. Sol. A 166, 667-673 (1998)
18. Gachot, C.; et al.: Comparative study of grain sizes and orientation in microstructured Au, Pt and W thin films designed by laser interference metallurgy. Appl. Surf. Sci. 255, 5626-5632 (2009)
19. Gao, F.; Leach, R.; Petzing, J.; Coupland, J.: Surface measurement errors using commercial scanning white light interferometers. Meas. Sci. Technol. 19, 1-13 (2008)
20. Lasagni, A.F.; D′Alessandria, M.; Giovanelli, R.; Mücklich, F.: Advanced design of periodical architectures in bulk metals by means of laser interference metallurgy. Appl. Surf. Sci. 254, 930-936 (2007) (Pubitemid 350138219)
21. Lasagni, A.F.: Advanced design of periodical structures by laser interference metallurgy in the micro/nano scale on macroscopic areas. PhD thesis, Saarland University, Saarbrücken (2006)
22. Carbone, G.; Bottiglione, F.: Asperity contact theories - do they predict linearity between contact area and load. J. Mech. Phys. Solids 56, 2555-2572 (2008)
23. Talonen, J.; Nenonen, P.; Pape, G.; Hänninen, H.: Effect of strain rate on the strain- induced γ → α′-martensite transformation and mechanical properties of austenitic stainless steels. Metall. Mater. Trans. A 36A, 421-432 (2005) (Pubitemid 40377363)
24. Haynes, W.M.; Lyde, D.R.: Handbook of Chemistry and Physics. CRC Press, Taylor and Francis Group, Boca Raton (2010)
25. Renusch, D.; Veal, B.; Natesan, K.; Grimsditch, M.: Transient oxidation in Fe-Cr-Ni alloys - a Raman-scattering study. Oxid. Met. 46, 365-381 (1996) (Pubitemid 126713287)
26. Oh, S.J.; Cook, D.C.; Townsend, H.E.: Characterization of iron oxides commonly formed as corrosion products on steel. Hyperfine Interact. 112, 59-66 (1998)
27. 3. J. Solid State Chem. 79, 19-27 (1989)
28. Farrow, R.L.; Benner, R.E.; Nagelberg, A.S.; Mattern, P.L.: Characterization of surface oxides by Raman spectroscopy. Thin Solid Films 73, 353-358 (1980) (Pubitemid 11474121)
29. Raman, R.K.S.; Gleeson, B.; Young, D.J.: Laser Raman spectroscopy - a technique for rapid characterisation of oxide scale layers. Mater. Sci. Technol. 14, 373-376 (2011)
30. Odziemkowski, M.S.; Schuhmacher, T.T.; Gillham, R.W.; Reardon, E.J.: Mechanism of oxide film formation on iron in simulating groundwater solutions: Raman spectroscopic studies. Corros. Sci. 40, 371-389 (1998) (Pubitemid 28424880)
31. De Faria, D.L.A.; De Oliveira, M.T.: Raman microspectroscopy of some iron oxides and oxyhydroxides. J. Raman Spectrosc. 28, 873-878 (1997) (Pubitemid 127690621)
32. Müser, M.H.: Der mikroskopische Ursprung der Reibung. Phys. J. 2, 43-48 (2003)
33. Campbell, W.E. Proceedings of M.I.T.; p. 197. MIT Press, Cambridge (1940)
34. He, G.; Robbins, M.O.; Müser, M.H.: Adsorbed layers and the origin of static friction. Science 284, 1650-1652 (1999) (Pubitemid 29291370)
35. Persson, B.N.J.: Theory of rubber friction and contact mechanics. J. Chem. Phys. 115, 3840-3861 (2001) (Pubitemid 32795699)
36. Hübner, W.: Phase transformations in austenitic stainless steels during low temperature tribological stressing. Tribol. Int. 34, 231-236 (2001) (Pubitemid 32303121)
37. Schramm, R.E.; Reed, R.P.: Stacking fault energy of seven commercial austenitic stainless steels. Metall. Mater. Trans. A 6A, 1345-1351 (1975)
38. Feller, H.G.; Gao, B.: Correlation of tribological and metal physics data: the role of stacking fault energy. Wear 132, 1-7 (1989)
39. Rigney, D.A.: Large strains associated with sliding contact of metals. Mater. Res. Innov. 1, 231-234 (1998) (Pubitemid 128684036)
40. Kuhlmann-Wilsdorf, D.: Dislocation behavior in fatigue IV. Quantitative interpretation of friction stress and back stress derived from hysteresis loops. Mater. Sci. Eng. 39, 231-245 (1979) (Pubitemid 10421029)
41. Prodanov, N.; Gachot, C.; Rosenkranz, A.; Mücklich, F.; Müser, M.H.: Contact mechanics of laser-textured surfaces - correlating contact area and friction. Tribol Lett. doi: 10.1007/s11249-012-0064-z