3-dimensional (3D) fabricated polymer based drug delivery systems

Journal of Controlled Release

Volumn 193, Issue , 2014, Pages 27-34

  Moulton, Simon E ^a   Wallace, Gordon G ^a  

^a UNIVERSITY OF WOLLONGONG   (Australia)

Author keywords

3 Dimensional fabrication; Degradable polymer; Inks Composites; Spatial distribution

Indexed keywords

DRUG DELIVERY; ELECTROSPINNING; FABRICATION; MACHINERY; NANOTECHNOLOGY; SPATIAL DISTRIBUTION;

3-DIMENSIONAL FABRICATION; CONTROLLED RELEASE; DEGRADABLE POLYMERS; DRUG DELIVERY SYSTEM; DRUG LOADING CAPACITY; FABRICATION MACHINERY; FABRICATION METHOD; FABRICATION TECHNIQUE;

LOADING;

DAPSONE; NANOFIBER; POLYMER; BIOMATERIAL; DRUG; DRUG CARRIER;

ARTICLE; DRUG DELIVERY SYSTEM; DRUG STABILITY; ELECTROSPINNING; HOT MELT EXTRUSION PRINTING; MELT ELECTROSPINNING; NANOFABRICATION; PRINTING; THREE DIMENSIONAL PRINTING; WET SPINNING TECHNIQUE; CHEMISTRY; PARTICLE SIZE; PHARMACEUTICS; PROCEDURES; SURFACE PROPERTY;

BIOCOMPATIBLE MATERIALS; DRUG CARRIERS; PARTICLE SIZE; PHARMACEUTICAL PREPARATIONS; POLYMERS; PRINTING, THREE-DIMENSIONAL; SURFACE PROPERTIES; TECHNOLOGY, PHARMACEUTICAL;

EID: 84908292719     PISSN: 01683659     EISSN: 18734995     Source Type: Journal    
DOI: 10.1016/j.jconrel.2014.07.005     Document Type: Article

References (85)

1. J.W. Cui, Y. Yan, Y.J. Wang, and F. Carus Templated assembly of pH-labile polymer-drug particles for intracellular drug delivery Adv. Funct. Mater. 22 2012 4718 4723
2. J.W. Cui, Y. Yan, G.K. Such, K. Liang, C.J. Ochs, A. Postma, and F. Caruso Immobilization and intracellular delivery of an anticancer drug using mussel-inspired polydopamine capsule Biomacromol 13 2012 2225 2230
3. C. Ward, S.P. Langdon, P. Mullen, A.L. Harris, D.J. Harrison, C.T. Supuran, and I.H. Kunkler New strategies for targeting the hypoxic tumour microenvironment in breast cancer Cancer Treatment Rev. 39 2013 171 179
4. O. Shimoni, A. Postma, Y. Yan, A.M. Scott, J.K. Heath, E.C. Nice, A.N. Zelikin, and F. Caruso Macromolecule functionalization of disulfide-bonded polymer hydrogel capsules and cancer cell targeting ACS Nano 6 6 2012 1463 1472
5. C.F. Weiniger, L. Golovanevski, A.J. Domb, and D. Ickowicz Extended release formulations for local anaesthetic agents Anaesthesia 67 2012 906 916
6. C. Deng, Y.J. Jiang, R. Cheng, F.H. Meng, and Z.Y. Zhong Biodegradable polymeric micelles for targeted and controlled anticancer drug delivery: promises, progress and prospects Nano Today 7 2012 467 480
7. H.A. Santos, J. Salonen, L.M. Bimbo, V.P. Lehto, L. Peltonen, and J. Hirvonen Mesoporous materials as controlled drug delivery formulations J. Drug Delivery Sci. and Technol. 21 2011 139 155
8. L.L. Lebel, B. Aissa, M.A. El Khakani, and D. Therriault Ultraviolet-assisted direct-write fabrication of carbon nanotube/polymer nanocomposite microcoils Adv. Mater. 22 2010 592 596
9. T.D. Brown, P.D. Dalton, and D.W. Hutmacher Direct writing by way of melt electrospinning Adv. Mater. 23 2011 5651 5657
10. R.A. Barry, R.F. Shepherd, J.N. Hanson, R.G. Nuzzo, P. Wiltzius, and J.A. Lewis Direct-write assembly of 3D hydrogel scaffolds for guided cell growth Adv. Mater. 21 2009 2407 2410
11. J. Zheng, H. Xie, W. Yu, M. Tan, F. Gong, X. Liu, F. Wang, G. Lv, W. Liu, G. Zheng, Y. Yang, W. Xie, and X. Ma Enhancement of surface graft density of MPEG on alginate/chitosan hydrogel microcapsules for protein repellency Langmuir 28 2012 13261 13273
12. U. Gbureck, E. Vorndran, F.A. Müller, and J.E. Barralet Low temperature direct 3D printed bioceramics and biocomposites as drug release matrices J. Control. Release 122 2007 173 180
13. G.M. Gratson, F. García-Santamaría, V. Lousse, M. Xu, S. Fan, J.A. Lewis, and P.V. Braun Direct-write assembly of three-dimensional photonic crystals: conversion of polymer scaffolds to silicon hollow-woodpile structures Adv. Mater. 18 2006 461 465
14. W. Wu, A. DeConinck, and J.A. Lewis Omnidirectional printing of 3D microvascular networks Adv. Mater. 23 2011 H178 H183
15. D. Therriault, R.F. Shepherd, S.R. White, and J.A. Lewis Fugitive inks for direct-write assembly of three-dimensional microvascular networks Adv. Mater. 17 2005 395 399
16. J.N. Hanson Shepherd, S.T. Parker, R.F. Shepherd, M.U. Gillette, J.A. Lewis, and R.G. Nuzzo 3D microperiodic hydrogel scaffolds for robust neuronal cultures Adv. Funct. Mater. 21 2011 47 54
17. V. Karageorgiou, and D. Kaplan Porosity of 3D biomaterial scaffolds and osteogenesis Biomaterials 26 2005 5474 5491
18. P. Rattanakit, S.E. Moulton, K.S. Santiago, S. Liawruangrath, and G.G. Wallace Modification of drug release profiles using extrusion printed polymer structures Int. J. Pharm. 422 2012 254 263
19. V. Chan, P. Zorlutuna, J.H. Jeong, H. Kong, and R. Bashir Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation Lab Chip 10 2010 2062 2070
20. A. van Blaaderen, R. Ruel, and P. Wiltzius Template-directed colloidal crystallization Nature 385 1997 321 324
21. G.M. Gratson, M. Xu, and J.A. Lewis Microperiodic structures: direct writing of three-dimensional webs Nature 428 2004 386
22. D. Therriault, S.R. White, and J.A. Lewis Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly Nat. Mater. 2 2003 265 271
23. J.A. Lewis Direct ink writing of 3D functional materials Adv. Funct. Mater. 16 2006 2193 2204
24. J.A. Lewis, and G.M. Gratson Direct writing in three dimensions Mater. Today 7 2004 32 39
25. J.E. Smay, G.M. Gratson, R.F. Shepherd, J. Cesarano, and J.A. Lewis Directed colloidal assembly of 3D periodic structures Adv. Mater. 14 2002 1279 1283
26. J.E. Smay, J. Cesarano, and J.A. Lewis Colloidal inks for directed assembly of 3-D periodic structures Langmuir 18 2002 5429 5437
27. G.M. Gratson, and J.A. Lewis Phase behavior and rheological properties of polyelectrolyte inks for direct-write assembly Langmuir 21 2005 457 464
28. J. Malda, J. Visser, F.P. Melchels, T. Jüngst, W.E. Hennink, W.J.A. Dhert, J. Groll, and D.W. Hutmacher 25th anniversary article: engineering hydrogels for biofabrication Adv. Mater. 25 2013 5011 5028
29. W. Schuurman, P.A. Levett, M.W. Pot, P.R. van Weeren, W.J.A. Dhert, D.W. Hutmacher, F.P.W. Melchels, T.J. Klein, and J. Malda Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs Macromol. Biosci. 13 2013 551 561
30. S.Z. Guo, M.C. Heuzey, and D. Therriault Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures Langmuir 30 2014 1142 1150
31. R. Kolakovic, T. Viitala, P. Ihalainen, N. Genina, J. Peltonen, and N. Sandler Expert Opinion Drug Delivery 10 2013 1711 1723
32. Q. Wang, N. Zhang, X. Hu, J. Yang, and Y. Du Chitosan/starch fibers and their properties for drug controlled release Eur. J. Pharm. Biopharm. 66 2007 398 404
33. H.L. Nie, Z.H. Ma, Z.X. Fan, C.J. Branford-White, X. Ning, L.M. Zhu, and J. Han Polyacrylonitrile fibers efficiently loaded with tamoxifen citrate using wet-spinning from co-dissolving solution Int. J. Pharm. 373 2009 4 9
34. B.B. Crow, A.F. Borneman, D.L. Hawkins, G.M. Smith, and K.D. Nelson Evaluation of in vitro drug release, pH change, and molecular weight degradation of poly(L-lactic acid) and poly(D, L-lactide-co-glycolide) fibers Tissue Eng. 11 2005 7 8
35. B.C. Mack, K.W. Wright, and M. Davis A biodegradable filament for controlled drug delivery J. Control. Release 139 2009 205 211
36. J. Giannatsis, and V. Dedoussis Additive fabrication technologies applied to medicine and health care: a review Int. J. Adv. Manuf. Technol. 40 2009 116 127
37. T. Boland, T. Xu, B. Damon, and X. Cui Application of inkjet printing to tissue engineering Biotechnol. J. 1 2006 910 917
38. C. Zhang, K. Zhao, T. Hu, X. Cui, N. Brown, and T. Boland Loading dependent swelling and release properties of novel biodegradable, elastic and environmental stimuli-sensitive polyurethanes J. Control. Release 131 2008 128 136
39. C.J. Ferris, K.J. Gilmore, G.G. Wallace, and M. in het Panhuis Modified gellan gum hydrogels for tissue engineering applications Soft Matter 9 2013 3705 3711
40. J.H.Y. Chung, S. Naficy, Z. Yue, R.M.I. Kapsa, A. Quigley, S.E. Moulton, and G.G. Wallace Bio-ink properties and printability for extrusion printing living cells Biomater. Sci. 1 2013 763 773
41. S. Bose, S. Vahabzadeh, and A. Bandyopadhyay Bone tissue engineering using 3D Printing Mater. Today 16 2013 496 504
42. Z. Fulop, T.T. Nielsen, K.L. Larsen, and T. Loftsson Dextran-based cylodextrin polymers: their solubilising effect and self-association Carbohydr. Polym. 97 2013 635 642
43. A. Szuts, P. Lang, R. Ambrus, L. Kiss, M.A. Deli, and P. Szabo-Revesz Applicability of sucrose laurate as surfactant in solid dispersions prepared by melt technology Int. J. Pharm. 410 2011 107 110
44. B. Vajna, I. Farkas, A. Farkas, H. Pataki, Z.K. Nagy, J. Madarasz, and G. Marosi Characterization of drug-cyclodextrin formulations using Raman mapping and multivariate curve resolution J. Pharm. Biomed. 56 2011 38 44
45. M. Allesø, N. Chieng, S. Rehder, J. Rantanen, T. Rades, and J. Aaltonen Enhanced dissolution rate and synchronized release of drugs in binary systems through formulation: amorphous naproxen-cimetidine mixtures prepared by mechanical activation J. Control. Release 136 2009 45 53
46. G. Patyi, A. Bodis, I. Antal, B. Vajna, Z.K. Nagy, and G. Marosi Thermal and spectroscopic analysis of inclusion complex of spironolactone prepared by evaporation and hot melt methods J. Therm. Anal. Calorim. 102 2012 349 355
47. M. Sauceau, J. Fages, A. Common, C. Nikitine, and E. Rodier New challenges in polymer foaming: a review of extrusion processes assisted by supercritical carbon dioxide Prog. Polym. Sci. 36 2010 749 766
48. M. Thommes, and P. Kleinebudde Use of 6-carrageenan as alternative pelletisation aid to microcrystalline cellulose in extrusion/spheronisation. I. Influence of type and fraction of filler Eur. J. Pharm. Biopharm. 63 2006 68 75
49. 2-aided and conventional melt extrusion for enhancing the dissolution rate of an active pharmaceutical ingredient Polym. Adv. Technol. 23 2012 909 918
50. J. Breitenbach Melt extrusion: from process to drug delivery technology Eur. J. Pharm. Biopharm. 54 2002 107 117
51. P. Viitanen, E. Suokas, P. Tormala, and N. Ashammakhi Release of diclofenac sodium from polylactide-co-glycolide 80/20 rods J. Mater. Sci. Mater. Med. 17 2006 1267 1274
52. L. Wang, J. Wang, X. Lin, and X. Tang Preparation and in vitro evaluation of gliclazide sustained-release matrix pellets: formulation and storage stability Drug Dev Ind. Pharmacol. 36 2010 814 822
53. B. Younes, and A. Fotheringham Factorial optimization of the effects of melt-spinning conditions on biodegradable as-spun aliphatic-aromatic copolyester fibers. III. diameter, tensile properties, and thermal shrinkage J. App. Poly. Sci. 122 2011 1434 1449
54. J. Feng, L. Xu, R. Gao, Y. Luo, and X. Tang Evaluation of polymer carriers with regard to the bioavailability enhancement of bifendate solid dispersions prepared by hot-melt extrusion Drug Dev. Ind. Pharm. 38 2011 735 743
55. J.P. Lakshman, Y. Cao, J. Kowalski, and A.T. Serajuddin Application of melt extrusion in the development of a physically and chemically stable high-energy amorphous solid dispersion of a poorly water-soluble drug Mol. Pharm. 5 2008 994 1002
56. X. Liu, M. Lu, Z. Guo, L. Huang, X. Feng, and C. Wu Improving the chemical stability of amorphous solid dispersion with cocrystal technique by hot melt extrusion Pharm. Res. 29 2012 806 817
57. A. Sakurai, T. Sakai, K. Sako, and Y. Maitani Polymer combination increased both physical stability and oral absorption of solid dispersions containing a low glass transition temperature drug: physicochemical characterization and in vivo study Chem. Pharm. Bull. 60 2012 459 464 (Tokyo)
58. I. Tho, B. Liepold, J. Rosenberg, M. Maegerlein, M. Brandl, and G. Fricker Formation of nano/micro-dispersions with improved dissolution properties upon dispersion of ritonavir melt extrudate in aqueous media Eur. J. Pharm. Sci. 40 2010 25 32
59. O.A. Abu-Diak, D.S. Jones, and G.P. Andrews An investigation into the dissolution properties of celecoxib melt extrudates: understanding the role of polymer type and concentration in stabilizing supersaturated drug concentrations Mol. Pharm. 8 2011 1362 1371
60. B.J. Park, C.Y. Kang, W.S. Kang, H.G. Choi, H.K. Han, and B.J. Lee New investigation of distribution imaging and content uniformity of very low dose drugs using hot-melt extrusion method Int. J. Pharm. 458 2013 245 253
61. S. Shah, S. Maddineni, J. Lu, and M.A. Repka Melt extrusion with poorly soluble drugs Int. J. Pharm. 453 2013 233 252
62. W. Deng, S. Majumdar, A. Singh, S. Shah, and N.N. Mohammed Stabilization of fenofibrate in low molecular weight hydroxypropylcellulose matrices produced by hot-melt extrusion Drug Dev. Ind. Pharm. 39 2013 290 298
63. M. Stankovic, H. de Waard, R. Steendam, C. Hiemstra, J. Zuidema, H.W. Frijlink, and W.L.J. Hinrichs Low temperature extruded implants based on novel hydrophilic multiblock copolymer for long-term protein delivery Eur. J. Pharm. Sci. 49 2013 578 587
64. L. Dierickx, J.P. Remon, and C. Vervaet Co-extrusion as manufacturing technique for multilayer mini-matrices with dual drug release Eur. J. Pharm. Biopharm. 85 2013 1157 1163
65. R. Bhardwaj, and J. Blanchard In vitro evaluation of Poly (D,L-lactide-co-glycolide) polymer-based implants containing the alpha-melanocyte stimulating hormone analog, Melanotan-I. J. Control Release 45 1997 49 55
66. R. Bhardwaj, and J. Blanchard In vitro characterization and in vivo release profile of a poly (D, L-lactide-co-glycolide)-based implant delivery system for the [alpha]-MSH analog, melanotan-I Int. J. Pharm. 170 1998 109 117
67. S.H. Masood Application of fused deposition modelling in controlled drug delivery devices Assem. Autom. 27 3 2007 215 221
68. N. Bhardwaj, and S.C. Kundu Electrospinning: a fascinating fiber fabrication technique Biotechnol. Adv. 28 2010 325 347
69. Z.M. Huang, C.L. He, A.Z. Yang, Y.Z. Zhang, X.J. Hang, J.L. Yin, and Q.S. Wu Encapsulating drugs in biodegradable ultrafine fibers through co-axial electrospinning J. Biomed. Mater. Res. 77 2006 169 179
70. H. Zhang, C.G. Zhao, Y.H. Zhao, G.W. Tang, and X.Y. Yuan Electrospinning of ultrafine core/shell fibers for biomedical applications Sci China Chem. 53 2010 1246 1254
71. A. Szentivanyi, T. Chakradeo, H. Zernetsch, and B. Glasmacher Electrospun cellular microenvironments: understanding controlled release and scaffold structure Adv. Drug Deliv. Rev. 63 2010 209 220
72. H.L. Jiang, Y.Q. Hu, Y. Li, P.C. Zhao, K.J. Zhu, and W.L. Chen A facile technique to prepare biodegradable coaxial electrospun nanofibers for controlled release of bioactive agents J. Control. Release 108 2005 237 243
73. T.J. Sill, and H.A. von Recum Electrospinning: applications in drug delivery and tissue engineering Biomaterials 29 2008 1989 2006
74. Y. Yeo, and K.N. Park Control of encapsulation efficiency and initial burst in polymeric microparticle systems Arch. Pharm. Res. 27 2004 1 12
75. L. Viry, S.E. Moulton, T. Romeo, C. Suhr, D. Mawad, M.J. Cook, and G.G. Wallace Emulsion-coaxial electrospinning: designing novel architectures for sustained release of highly soluble low molecular weight drugs J. Mater. Chem. 2 2012 11347 11353
76. Y. Choi, R. Nirmala, J.Y. Lee, M. Rahman, S.T. Hong, and H.Y. Kim Antibacterial ciprofloxacin HCl incorporated polyurethane composite nanofibers via electrospinning for biomedical-applications Ceram. Int. 39 2013 4937 4944
77. X.L. Lin, D.Y. Tang, and H.F. Du Self-assembly and controlled release behaviour of the water-insoluble drug nifedipine from electrospun PCL-based polyurethane nanofibres J. Pharm. Pharmacol. 65 2013 673 681
78. X.J. Han, Z.M. Huang, C.L. He, and L. Liu Preparation and characterization of core-shell structured nanofibers by coaxial electrospinning High Perform. Polym. 19 2007 147 159
79. J. Han, S. Farah, A.J. Domb, and P.I. Lelkes Electrospun rapamycin-eluting polyurethane fibers for vascular grafts Pharm. Res. 30 2013 1735 1748
80. P.D. Dalton, K. Klinkhammer, J. Salber, D. Klee, and M. Moller Direct in-vitro electrospinning with polymer melts Biomacromolecules 7 2006 686 690
81. B.L. Farrugia, T.D. Brown, Z. Upton, D.W. Hutmacher, P.D. Dalton, and T.R. Dargaville Dermal fibroblast infiltration of poly(g-caprolactone) scaffolds fabricated by melt electrospinning in a direct writing mode Biofabrication 5 2013 025001
82. N. Bock, M.A. Woodruff, R. Steck, D.W. Hutmacher, B.L. Farrugia, and T.R. Dargaville Composites for delivery of therapeutics: combining melt electrospun scaffolds with loaded electrosprayed microparticles Macromol. Biosci. 14 2013 202 214
83. A. Balogh, G. Dravavolgyi, K. Farago, A. Farkas, T. Vigh, P. Lajossoti, I. Wagner, J. Madarasz, H. Pataki, G. Marosi, and Z.K. Nagy Plasticized drug-loaded melt electrospun polymer mats: characterization, thermal degradation, and release kinetics J. Pharm. Sci. 103 2014 1278 1287
84. Z.K. Nagy, A. Balogh, G. Dravavolgyi, J. Ferguson, H. Pataki, B. Vajna, and G. Marosi Solvent-free melt electrospinning for preparation of fast dissolving drug delivery system and comparison with solvent-based electrospun and melt extruded systems J. Pharm. Sci. 102 2013 508 517
85. X. Shen, D. Yu, X. Zhang, C. Branford-White, and L. Zhu Preparation and characterization of TAM-loaded HPMC/PAN composite fibers for improving drug-release profiles J. Biomater. Sci. 22 2011 2227 2240