Thermoplastic Starch

Innovations in Food Packaging: Second Edition

Volumn , Issue , 2013, Pages 391-412

  Zhang, Yachuan ^a   Rempel, Curtis ^b   McLaren, Derek ^a  

^a Manitoba Starch Products   (Canada)

^b UNIVERSITY OF MANITOBA   (Canada)

Author keywords

Biopolymers; Plasticization; Starch based bioplastics; Thermoplastic starch

Indexed keywords

BIOPOLYMERS; BLENDING; CHEMICAL MODIFICATION; FATTY ACIDS; MECHANICAL PERMEABILITY; NANOCOMPOSITES; PLASTICIZERS; REINFORCED PLASTICS; SOLVENTS; TENSILE STRENGTH;

BIO-PLASTICS; ELONGATION AT BREAK; HIGH AMYLOSE; INDUSTRY NEEDS; NATIVE STARCH; PLASTICIZATION; THERMOPLASTIC STARCH; WATER VAPOR PERMEABILITY;

STARCH;

EID: 84902613046     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-394601-0.00016-3     Document Type: Chapter

References (87)

1. Abdorreza M.N., Cheng L.H., Karim A.A. Effects of plasticizers on thermal properties and heat sealability of sago starch films. Food Hydrocolloid. 2011, 25:56-60.
2. Abdul Majid R., Ismail H., Mat Taib R. Effects of PE-g-MA on tensile properties, morphology and water absorption of LDPE/thermoplastic sago starch blends. Polym.Plast. Technol. 2009, 48:919-924.
3. Adhikari B., Chaudhary D.S., Clerfeuille E. Effect of plasticisers in the moisture migration behaviour of low-amylose starch films during drying. Drying Technol. 2010, 28:468-480.
4. Alvarez A., Vazquez A., Bernal C. Effect of microstructure on the tensile and fracture properties of sisal fiber/starch-based composites. J. Compos. Mater. 2005, 40(1):21-35.
5. Aouada F.A., Mattoso L.H.C., Longo E. New strategies in the preparation of exfoliated thermoplastic starch-montmorillonite nanocomposites. Indust. Crop. Prod. 2011, 34:1502-1508.
6. Chivrac F., Pollet E., Schmutz M., Averous L. New approach to elaborate exfoliated starch based nanobiocomposites. Biomacromolecules 2008, 9:896-900.
7. Chivrac F., Pollet E., Averous L. Progress in nano-biocomposites based on polysaccharides and nanoclays. Mater. Sci. Eng. R. 2009, 67:1-16.
8. Chivrac F., Pollet E., Schmutz M., Averous L. Starch nano-biocomposites based on needle-like sepiolite clays. Carbohydr. Polym. 2010, 80:145-153.
9. Chung Y., Ansari S., Estevez L., Hayrapetyan S., Giannelis E.P., Lai H. Preparation and properties of biodegradable starch-clay nanocomposites. Carbohydr. Polym. 2010, 79:391-396.
10. Curvelo A.A.S., de Carvalho A.J.F., Agnelli J.A.M. Thermoplastic starch-cellulosic fibers composites: preliminary results. Carbohydr Polym. 2001, 45:183-188.
11. Cyras V.P., Manfredi L.B., Ton That M.T., Vazquez A. Physical and mechanical properties of thermoplastic starch/montmorillonite nanocomposite films. Carbohydr. Polym. 2008, 73:55-63.
12. Da Roz A.L., Carvalho A.J.F., Gandini A., Curvelo A.A.S. The effect of plasticizers on thermoplastic starch compositions obtained by melt processing. Carbohydr. Polym. 2006, 63:417-424.
13. Dai H., Chang P.R., Yu J., Ma X. N,N-bis(2-hydroxyethyl) formamide as a new plasticizer for thermoplastic starch. Starch 2008, 60:676-684.
14. Dias A.B., Muller C.M.O., Larotonda F.D.S., Laurindo J.B. Mechanical and barrier properties of composite films based on rice flour and cellulose fibers. LWT-Food Sci. Technol. 2011, 44:535-542.
15. Funke U., Bergthaller W., Lindhauer M.G. Processing and characterization of biodegradable products based on starch. Polym. Degrad. Stabil. 1998, 59:293-296.
16. Galdeano M.C., Mali S., Grossmann M.V., Yamashita F., Garcia M.A. Effects of plasticizers on the properties of oat starch films. Mater. Sci. Eng. C. 2009, 29:532-538.
17. Garcia M.A., Martino M.N., Zaritzky N.E. Lipid addition to improve barrier properties of edible starch-based films and coatings. J. Food Sci. 2000, 65:114-121.
18. Gilfillan W.N., Nguyen D.M.T., Sopade P.A., Doherty W.O.S. Preparation and characterisation of composites from starch and sugar cane fibre. Indust. Crop. Prod. 2012, 40:45-54.
19. Girija B., Sailaja R. Low-density polyethylene/plasticized tapioca starch blends with the low-density polyethylene functionalized with maleate ester: mechanical and thermal properties. J. Appl. Polym. Sci. 2006, 101(2):1109-1120.
20. Godbole S., Gote S., Latkar M., Chakrabarti T. Preparation and characterization of biodegradable poly-3-hydroxybutyrate-starch blend films. Biores. Technol. 2003, 86:33-37.
21. Huang M., Yu J., Ma X. High mechanical performance MMT-urea and formamide-plasticized thermoplastic cornstarch biodegradable nanocomposites. Carbohydr. Polym. 2006, 63:393-399.
22. Huang M.F., Yu J.G., Ma X.F. Studies on the properties of montmorillonite reinforced thermoplastic starch composites. Polymer 2004, 45:7017-7023.
23. Huneault M.A., Li H. Preparation and properties of extruded thermoplastic starch/polymer blends. J. Appl. Polym. Sci. 2012, 126:E96-E108.
24. Jimenez A., Fabra M.J., Talens P., Chiralt A. Effect of re-crystallization on tensile, optical and water vapour barrier properties of corn starch films containing fatty acids. Food Hydrocolloid 2012, 26:302-310.
25. Ke T., Sun X. Physical properties of poly(lactic acid) and starch composites with various blending ratios. Cereal Chem. 2000, 77:761-768.
26. Ke T., Sun X. Thermal and mechanical properties of poly (lactic acid) and starch blends with various plasticizers. Trans ASAE 2001, 44:945-953.
27. Koch K., Gillgren T., Stading M., Andersson R. Mechanical and structural properties of solution-cast high amylose maize. Int. J. Biol. Macromol. 2010, 46:13-19.
28. Li M., Liu P., Zou W., Yu L., Xie F., Pu H., et al. Extrusion processing and characterization of edible starch films with different amylose contents. J. Food Eng. 2011, 106:95-101.
29. Lopez O.V., Garcia M.A. Starch films from a novel (Pachyrhizus ahipa) and conventional sources: development and characterization. Mater. Sci. Eng. C. 2012, 32:1931-1940.
30. Lourdin D., Bizot H., Colonna P. "Antiplasticization" in starch-glycerol films?. J. Appl. Polym. Sci. 1997, 63:1047-1053.
31. Lu P., Zhang M., Liu Y., Li J., Xin M. Characteristics of vermiculite-reinforced thermoplasticstarch composite films. J. Appl. Polym. Sci. 2012, 126:E116-E122.
32. Lu Y.S., Weng L.H., Cao X.D. Morphological, thermal and mechanical properties of ramie crystallites-reinforced plasticized starch biocomposites. Carbohydr. Polym. 2006, 63:198-204.
33. Luo X., Li J., Lin X. Effect of gelatinization and additives on morphology and thermal behavior of corn starch/PVA blend films. Carbohydr. Polym. 2012, 90:1595-1600.
34. Ma X., Yu J., Kennedy J.F. Studies on the properties of natural fibers-reinforced thermoplastic starch composites. Carbohydr. Polym. 2005, 62:19-24.
35. Ma X.F., Yu J.G. The plasticized containing amide groups for thermoplastic starch. Carbohydr Polym. 2004, 57:197-203.
36. Ma X.F., Yu J.G., Wang N. Fly ash reinforced thermoplastic starch composites. Carbohydr. Polym. 2007, 67:32-39.
37. Mali S., Grossmann M.V.E., Garcia M.A., Martino M.N., Zaritzky N.E. Microstructural characterization of yam starch films. Carbohydr. Polym. 2002, 50:379-386.
38. Mali S., Grossmann M.V.E., Garcia M.A., Martino M.N., Zaritzky N.E. Effects of controlled storage on thermal, mechanical and barrier properties of plasticized films from different starch sources. J. Food Eng. 2006, 75:453-460.
39. McGlashan S.A., Halley P.J. Preparation and characterization of biodegradable starch-based nanocomposite materials. Polym. Int. 2003, 52:1767-1773.
40. McHugh T.H., Avena-Bustillos R., Krochta J.M. Hydrophilic edible films modified procedure for water vapour permeability and explanations of thickness effects. J. Food Sci. 1993, 58:899-903.
41. Mehyar G.F., Han J.H. Physical and mechanical properties of high-amylose rice and pea starch films as affected by relative humidity and plasticizer. J. Food Sci. 2004, 69:E449-E454.
42. Melo C.P.B., Grossmann M.V.E., Yamashita F., Youssef E.Y., Dall Antonia L.H., Mali S. Effect of manufacturing process and xanthan gum addition on the properties of cassava starch films. J. Polym. Environ. 2011, 19:739-749.
43. Mondragon M., Mancilla J.E., Rodriguez-Gonzalez F.J. Nanocomposites from plasticized high amylopectin normal and high amylose maize starches. Polym. Eng. Sci. 2008, 48(7):1261-1267.
44. Moscicke L., Mitrus M., Wojtowicz A., Oniszczuk T., Rejak A., Janssen L. Application of extrusion-cooking for processing of thermoplastic starch (TPS). Food Res. Int. 2012, 47:291-299.
45. Muscat D., Adhikari B., Adhikari R., Chaudhary D.S. Comparative study of film forming behaviour of low and high amylose starches using glycerol and xylitol as plasticizers. J. Food Eng. 2012, 109:189-201.
46. Myllarinen P., Partanen R., Seppala J., Forssell P. Effect of glycerol on behavior of amylose and amylopectin films. Carbohydr. Polym. 2002, 50:355-361.
47. Müller C.M.O., Laurindo J.B., Yamashita F. Effect of cellulose fibers on the crystallinity and mechanical properties of starch-based films at different relative humidity values. Carbohydr. Polym. 2009, 77:293-299.
48. Müller C.M.O., Laurindo J.B., Yamashita F. Effect of cellulose fibers addition on the mechanical properties and water vapor barrier of starch-based films. Food Hydrocolloid 2009, 23:1328-1333.
49. Namazi H., Dadkhah A., Mosadegh M. New biopolymer nanocomposite of starch-graft polystyrene/montmorillonite clay prepared through emulsion polymerization method. J. Polym. Environ. 2012, 20:794-800.
50. Ning W., Jiugao Y., Xiaofei M., Ying W. The influence of citric acid on the properties of thermoplastic starch/linear low-density polyethylene blends. Carbohydr. Polym 2007, 67(3):446-453.
51. Olivato J.B., Grossmann M.V.E., Bilck A.P., Yamashita F. Effect of organic acids as additives on the performance of thermoplastic starch/polyester blown films. Carbohydr. Polym. 2012, 90:159-164.
52. Panthapulakkal S., Zereshkian A., Sain M. Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites. Biores. Technol. 2006, 97:265-272.
53. Park H.M., Lee W.K., Park C.Y., Cho W.J., Ha C.S. Environmentally friendly polymer hybrids. Part I. Mechanical, thermal, and barrier properties of thermoplastic starch/clay nanocomposites. J. Mater. Sci. 2003, 38:909-915.
54. Phan T.D., Debeaufort F., Luu D., Voilley A. Functional properties of edible agar-based and starch-based films for food quality preservation. J. Agric. Food Chem. 2005, 53(4):973-981.
55. Prachayawarakorn J., Hommanee L., Phosee D., Chairapaksatien P. Property improvement of thermoplastic mung bean starch using cotton fiber and low-density polyethylene. Starch 2010, 62:435-443.
56. Preechawong D., Peesan M., Supaphol P., Rujiravanit R. Preparation and characterization of starch/poly(l-lactic acid) hybrid of foams. Carbohydr. Polym. 2005, 59:329-337.
57. Pushpadass H.A., Hanna M.A. Age-induced changes in the microstructure and selected properties of extruded starch films plasticized with glycerol and stearic acid. Indust. Eng. Chem. Res. 2009, 48:8457-8463.
58. Pushpadass H.A., Marx D.B., Hanna M.A. Effect of extrusion temperature and plasticizers on the physical and functional properties of starch films. Starch 2008, 60:527-538.
59. Pushpadass H.A., Bhandari P., Hanna M.A. Effects of LDPE and glycerol contents and compounding on the microstructure and properties of starch composite films. Carbohydr. Polym. 2010, 82:1082-1089.
60. Rhim J.W., Ng P.K.W. Natural biopolymer-based nanocomposite films for packaging applications. Crit. Rev. Food Sci. 2007, 47:411-433.
61. Rindlav-Westling A., Stading M., Hermansson A.M., Gatenholm P. Structure, mechanical and barrier properties of amylose and amylopectin films. Carbohydr. Polym. 1998, 36:217-224.
62. Sabetzadeh M., Bagheri R., Masoomi M. Effect of corn starch content in thermoplastic starch/low density polyethylene blends on their mechanical and flow properties. J. Appl. Poly. Sci. 2012, 126:E63-69.
63. Sailaja R.R.N., Chanda M. Use of maleic anhydride-grafted polyethylene as compatibilizer for HDPE-tapioca starch blends: effects on mechanical properties. J. Appl. Polym. Sci. 2001, 80:863-872.
64. Smits A.L.M., Kruiskamp P.H., van Soest J.J.G., Vliegenthart J.F.G. The influence of various small plasticizers and malto-oligosaccharides on the retrogradation of (partly) gelatinized starch. Carbohydr. Polym. 2003, 51:417-424.
65. Souza R.C.R., Andrade C.T. Investigation of the gelatinization and extrusion processes of corn starch. Adv. Polym. Technol. 2002, 21:1-8.
66. Soykeabkaew N., Supaphol P., Rujiravanit R. Preparation and characterization of jute- and flax-reinforced starch-based composite foams. Carbohydr. Polym. 2004, 58:53-63.
67. Stagner J.A., Alves V.D., Narayan R. Application and performance of maleated thermoplastic starch-poly(butylene adipate-co-terephthalate) blends for films. J. Appl. Polym. Sci. 2012, 126:E135-E142.
68. Stepto R.F.T. The processing of starch as a thermoplastic. Macromol. Symp. 2003, 201:203-212.
69. Tang X., Alavi S., Herald T.J. Barrier and mechanical properties of starch clay nanocomposite films. Cereal Chem. 2008, 85(3):433-439.
70. Thunwall M., Boldizar A., Rigdahl M. Extrusion processing of high amylose potato starch materials. Carbohydr. Polym. 2006, 65:441-446.
71. Thunwall M., Boldizar A., Rigdahl M. Compression molding and tensile properties of thermoplastic potato starch materials. Biomacromolecules 2006, 7:981-986.
72. Wang N., Yu J., Chang P.R., Ma X. Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends. Carbohydr. Polym. 2008, 71:109-118.
73. Wang S., Yu J., Yu J. Influence of maleic anhydride on the compatibility of thermal plasticized starch and linear low-density polyethylene. J. Appl. Polym. Sci. 2004, 93(2):686-695.
74. Wang Y.J., Liu W., Sun Z. Effects of glycerol and PE-g-MA on morphology, thermal and tensile properties of LDPE and rice starch blends. J. Appl. Polym. Sci. 2004, 92:344-350.
75. Wilhelm H.M., Sierakowski M.R., Souza G.P., Wypych F. Starch films reinforced with mineral clay. Carbohydr. Polym. 2003, 52:101-110.
76. Wu H., Liu C., Chen J., Chang P.R., Chen Y., Anderson D.P. Structure and properties of starch/α-zirconium phosphate nanocomposite films. Carbohydr. Polym. 2009, 77:358-364.
77. Yang J.H., Yu J.G., Ma X.F. Study on the properties of ethylenebisformamide and sorbitol plasticized corn starch (ESPTPS). Carbohydr. Polym. 2006, 66:110-116.
78. Yang J.H., Yu J.G., Ma X.F. Preparation and properties of ethylenebisformamide plasticized potato starch (EPTPS). Carbohydr. Polym. 2006, 63:218-223.
79. Yu F., Prashantha K., Soulestin J., Lacrampe M.F., Krawczak P. Plasticized-starch/poly(ethylene oxide) blends prepared by extrusion. Carbohydr. Polym. 2013, 91:253-261.
80. Yu J., Chang P.R., Ma X. The preparation and properties of dialdehyde starch and thermoplastic dialdehyde starch. Carbohydr. Polym. 2010, 79:296-300.
81. Zhang Y., Han J.H. Mechanical and thermal characteristics of pea starch films plasticized with monosaccharides and polyols. J. Food Sci. 2006, 71:E109-E118.
82. Zhang Y., Han J.H. Plasticization of pea starch films with monosaccharides and polyols. J. Food Sci. 2006, 71:E253-E261.
83. Zhang Y., Liu Z., Han J.H. Starch-based edible films. Environmental-Compatible Food Packaging 2008, 108-136. Woodhead Publishing, Cambridge, U.K. E. Chiellini (Ed.).
84. Zhang Y., Thompson M., Liu Q. The effect of pea fiber and potato pulp on thermal property, surface tension, and hydrophilicity of extruded starch thermoplastics. Carbohydr. Polym. 2011, 86:700-707.
85. Zhao Z., Wang X., Zhao C., Zhu X., Du S. Adsorption and desorption of antimony acetate on sodium montmorillonite. J. Colloid Interf. Sci. 2010, 345(2):154-159.
86. Zullo R., Iannace S. The effects of different starch sources and plasticizers on film blowing of thermoplastic starch: correlation among process, elongational properties and macromolecular structure. Carbohydr. Polym. 2009, 77:376-383.
87. de Carvalho A.J.F., Curvelo A.A.S., Agnelli J.A.M. A first insight on composites of thermoplastic starch and kaolin. Carbohydr. Polym 2001, 45:189-194.