Modeling metal deposition in heat transfer analyses of additive manufacturing processes

Finite Elements in Analysis and Design

Volumn 86, Issue , 2014, Pages 51-60

  Michaleris, Panagiotis ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

Additive manufacturing; Element activation; Heat transfer; Metal deposition

Indexed keywords

3D PRINTERS; DEPOSITION; ERRORS; FINITE ELEMENT METHOD; MANUFACTURE; METALS;

ADDITIVE MANUFACTURING; ADDITIVE MANUFACTURING PROCESS; FINITE ELEMENT TECHNIQUES; HEAT TRANSFER ANALYSIS; LASER AND ELECTRON BEAMS; METAL DEPOSITION; STRUCTURAL COMPONENT; SURFACE CONVECTION;

HEAT TRANSFER;

EID: 84899640153     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.finel.2014.04.003     Document Type: Article

References (47)

1. S.M. Kelly, and S.L. Kampe Metall. Mater. Trans. Phys. Metall. Mater. Sci. 35A 2004
2. S.M. Kelly, Thermal and microstructure modeling of metal deposition processes with application to Ti-6Al-4V (Ph.D. thesis), Virginia Tech, 2004.
3. P. Peyre, P. Aubry, R. Fabbro, R. Neveu, and A. Longuet Analytical and numerical modelling of the direct metal deposition laser process J. Phys. D Appl. Phys. 41 025403 2008 10
4. X. Xiong, W.H. Hofmeister, Z. Cheng, J.E. Smugeresky, E.J. Lavernia, and J.M. Schoenung in situ thermal imaging and three-dimensional finite element modeling of tungsten carbide-cobalt during laser deposition Acta Mater. 57 2009 5419 5429
5. I.A. Roberts, C.J. Wang, R. Esterlein, M. Stanford, and D.J. Mynors A three-dimensional finite element analysis of the temperature field during laser melting of metal powders in additive layer manufacturing Int. J. Mach. Tools Manuf. 49 2009 916 923
6. G.P. Dinda, A.K. Dasgupta, and J. Mazumder Laser aided direct metal deposition of inconel 625 superalloy microstructural evolution and thermal stability Mater. Sci. Eng. A 509 1 2009 98 104
7. B. Baufeld, O. Van der Biest, and R. Gault Additive manufacturing of ti-6al-4v components by shaped metal deposition microstructure and mechanical properties Mater. Des. 31 2010 S106 S111
8. Alireza Fathi, Amir Khajepour, Ehsan Toyserkani, and Mohammad Durali Clad height control in laser solid freeform fabrication using a feedforward PID controller Int. J. Adv. Manuf. Technol. 35 3 2007 280 292
9. Almir Heralić, Anna-Karin Christiansson, and Bengt Lennartson Height control of laser metal-wire deposition based on iterative learning control and 3d scanning Opt. Lasers Eng. 2012
10. Lijun Song, Vijayavel Bagavath-Singh, Bhaskar Dutta, and Jyoti Mazumder Control of melt pool temperature and deposition height during direct metal deposition process Int. J. Adv. Manuf. Technol. 58 1 2012 247 256
11. N.W. Klingbeil, J.L. Beuth, R.K. Chin, and C.H. Amon Residual stress-induced warping in direct metal solid freeform fabrication Int. J. Mech. Sci. 44 1 2002 57 77 (Pubitemid 34065154)
12. K. Dai, and L. Shaw Distortion minimization of laser-processed components through control of laser scanning patterns Rapid Prototyp. J. 8 5 2002 270 276 (Pubitemid 35432087)
13. Aditad Vasinonta, Jack L. Beuth, and Michelle Griffith Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures J. Manuf. Sci. Eng. 129 1 2007 101 109 (Pubitemid 46723448)
14. A. Lundback, and L.-E. Lindgren Modelling of metal deposition Finite Elem. Anal. Des. 47 2011 1169 1177
15. A. Anca, V.D. Fachinotti, G. Escobar-Palafox, and A. Cardona Computational modelling of shaped metal deposition Int. J. Numer. Methods Eng. 85 2011 84 106
16. M. Chiumenti, M. Cervera, A. Salmi, C.A. de Sraacibar, N. Dialami, and K. Matsui Finite element modeling of multi-pass welding and shaped metal deposition processes Comput. Methods Appl. Mech. Eng. 199 2010 2343 2359
17. H. Hibbitt, and P.V. Marcal A numerical, thermo-mechanical model for the welding and subsequent loading of a fabricated structure Comput. Struct. 3 1973 1145 1174
18. J.H. Argyris, J. Szimmat, and K.J. Willam Computational aspects of welding stress analysis Comput. Methods Appl. Mech. Eng. 33 1982 635 666
19. V.J. Papazoglou, and K. Masubuchi Numerical analysis of thermal stresses during welding including phase transformation effects J. Press. Vessel Technol. 104 1982 198 203 (Pubitemid 12548847)
20. L.-E. Lindgren Finite element modelling and simulation of welding, part 1 increased complexity J. Therm. Stresses 24 2001 141 192
21. L.-E. Lindgren Finite element modelling and simulation of welding, part 2 improved material modelling J. Therm. Stresses 24 2001 195 231
22. L.-E. Lindgren Finite element modelling and simulation of welding, part 3 efficiency and integration J. Therm. Stresses 24 2001 305 334
23. L.E. Lindgren, and P. Michaleris Modeling of welding for residual stresses Jian Lu, Handbook on Residual Stress vol. 2 2005 SEM USA 47 67
24. L.-E. Lindgren Numerical simulation of welding Comput. Methods Appl. Mech. Eng. 195 2006 6710 6736
25. L.-E. Lindgren Computational Welding Mechanics. Thermomechanical and Microstructural Simulations 2007 Woodhead Publishing Cambridge, England
26. J.A. Goldak, and M. Akhlaghi Computational Welding Mechanics 2005 Springer New York, NY, USA
27. P. Michaleris Minimization of Welding Distortion and Buckling. Modeling and Implementation 2011 Woodhead Publishing Cambridge, England
28. S. Mishra, and T. DebRoy A heat-transfer and fluid-flow model to obtain a specific weld geometry using various combinations of welding variables J. Appl. Phys. 98 044902 2005
29. Z. Yang, N. Chen, H.W. Ludewig, Z. Cao, Virtual welded-joint design by coupling thermal-metallurgical-mechanical modeling, in: 6th International Trends in Welding Research Conference Proceedings, ASM International, Pine Mountain, GA, 2003, pp. 861-866.
30. G. Taylor, M. Hughes, N. Strusevich, K. Pericleous, Finite volume methods applied to the computational modelling of welding phenomena, in: 2nd International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Australia, 1999, pp. 405-410.
31. T. Zacharia, S.A. David, J.M. Vitek, and T. DebRoy Weld pool development during GTA and laser beam welding of type 304 stainless steel, part 1-theoretical analysis Weld. Res. Suppl. S 1989 499 509
32. C. Kim, W. Zhang, and T. Debroy Modeling of temperature field and solidified surface profile during gas-metal arc fillet welding J. Appl. Phys. 94 4 2003 2667 2679
33. T. Zacharia, A. Eraslan, D. Aldun, and S.A. David Three-dimensional transient model for arc-welding process Metall. Trans. B 20 1989 645 659 (Pubitemid 20609367)
34. Lijun Han, Kaushik M. Phatak, and F.W. Liou Modeling of laser deposition and repair process J. Laser Appl. 17 2005 89
35. S. Ghosh, and J. Choi Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process J. Laser Appl. 17 2005 144
36. H. Tersing, J. Lorentzon, A. Francois, A. Lundback, B. Babu, J. Barboza, V. Backer, and L.-E. Lindgren Simulation of manufacturing chain of a titanium aerospace component with experimental validation Finite Elem. Anal. Des. 51 2012 10 21
37. L.-E. Lindgren, H. Runnemalm, and M.O. Nasstrom Simulation of multipass welding of a thick plate Int. J. Numer. Methods Eng. 44 9 1999 1301 1316
38. L.-E. Lindgren, and E. Hedblom Modelling of addition of filler material in large deformation analysis of multipass welding Commun. Numer. Methods Eng. 17 9 2001 647 657 (Pubitemid 32901638)
39. Gangxian Zhu, Anfeng Zhang, Dichen Li, Yiping Tang, Zhiqiang Tong, and Qiaopan Lu Numerical simulation of thermal behavior during laser direct metal deposition Int. J. Adv. Manuf. Technol. 55 9-12 2011 945 954
40. R. Jendrzejewski, G. Śliwiński, M. Krawczuk, and W. Ostachowicz Temperature and stress fields induced during laser cladding Comput. Struct. 82 7 2004 653 658
41. Rafał Jendrzejewski, and Gerard Śliwiński Investigation of temperature and stress fields in laser cladded coatings Appl. Surf. Sci. 254 4 2007 921 925 (Pubitemid 350138222)
42. S. Ghosh, and J. Choi Modeling and experimental verification of transient/residual stresses and microstructure formation in multi-layer laser aided DMD process J. Heat Transf. 128 7 2006 662 679 (Pubitemid 44160855)
43. lens® process Mater. Sci. Eng. A 428 1 2006 47 53 (Pubitemid 43977187)
44. P. Peyre, P. Aubry, R. Fabbro, R. Neveu, and Arnaud Longuet Analytical and numerical modelling of the direct metal deposition laser process J. Phys. D Appl. Phys. 41 2 2008 025403
45. J. Song, J. Shanghvi, and P. Michaleris Optimization of thermo-elasto-plastic manufacturing processes Comput. Methods Appl. Mech. Eng. 193 2004 4541 4566
46. J. Goldak, A. Chakravarti, and M. Bibby A new finite element model for welding heat sources Metall. Trans. B 15B 1984 299 305 (Pubitemid 14583868)
47. Rodney F. Boyer, and E.W. Collings Materials Properties Handbook Titanium Alloys 1994 ASM International Materials Park, OH, USA 514