Finite element modeling of multi-pass welding and shaped metal deposition processes

Computer Methods in Applied Mechanics and Engineering

Volumn 199, Issue 37-40, 2010, Pages 2343-2359

  Chiumenti, Michele ^a   Cervera, Miguel ^a   Salmi, Alessandro ^b   Agelet de Saracibar, Carlos ^a   Dialami, Narges ^a   Matsui, Kazumi ^c  

^a INTERNATIONAL CENTER FOR NUMERICAL METHODS IN ENGINEERING CIMNE   (Spain)

^b POLITECNICO DI TORINO   (Italy)

^c YOKOHAMA NATIONAL UNIVERSITY   (Japan)

Author keywords

Finite element method; Hot cracking; Multi pass welding; Shaped metal deposition process; Thermo mechanical analysis

Indexed keywords

ALLOY 718; ELASTO-VISCOPLASTIC CONSTITUTIVE MODEL; EXPERIMENTAL DATA; FE SOFTWARE; FILLER MATERIALS; FINITE ELEMENT MODELING; FULLY-COUPLED; LATENT HEAT RELEASE; MANUFACTURING TECHNOLOGIES; MATERIAL BEHAVIOR; MECHANICAL ANALYSIS; METAL DEPOSITION; METALLURGICAL MODEL; MULTI-PASS WELDING; NUMERICAL SIMULATION; PHASE CHANGES; SHAPED METAL DEPOSITION PROCESS; SHRINKAGE EFFECTS; TARGET MATERIALS; TEMPERATURE EVOLUTION; THERMO-MECHANICAL; THERMO-MECHANICAL ANALYSIS; WELDING LAYERS;

COMPUTER SOFTWARE; FINITE ELEMENT METHOD; METAL ANALYSIS; METALS; STRESSES; SUBMERGED MELT WELDING;

COMPUTER SIMULATION;

EID: 77954757585     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cma.2010.02.018     Document Type: Article

References (31)

1. Lindgren L.-E., Runnemalm H., Näsström M. Simulation of multipass welding of a thick plate. Int. J. Numer. Meth. Eng. 1999, 44:1301-1316.
2. Lobitz D.W., Mc Clure J.D., Nickell R.E. Residual stresses and distorsions in multi pass welding. Proc. ASME W AM, Numerical Modelling of Manufacturing Processes, PVP-PB-25 1977, 1-18.
3. Lindgren L.-E. Finite element modelling of welding part 1: increased complexity. J. Therm. Stress. 2001, 24:141-192.
4. Lindgren L.-E. Finite element modelling of welding part 2: improved material modelling. J. Therm. Stress. 2001, 24:195-231.
5. Lindgren L.-E. Finite element modelling of welding part 3: efficiency and integration. J. Therm. Stress. 2001, 24:305-334.
6. Agelet de Saracibar C., Cervera M., Chiumenti M. On the formulation of coupled thermoplastic problems with phase-change. Int. J. of Plasticity 1999, 15:1-34.
7. Cervera M., Agelet de Saracibar C., Chiumenti M. Thermo-mechanical analysis of industrial solidification processes. Int. J. Numer. Meth. Eng. 1999, 46:1575-1591.
8. Chiumenti M., Agelet de Saracibar C., Cervera M. On the numerical modelling of the thermo-mechanical contact for metal casting analysis. J. Heat Transf. 2008, 130:1-10.
9. Rosenthal D. Mathematical theory of heat distribution during welding and cutting. Welding J. 1941, 20(5):220-234.
10. Pavelec V., Tanbakuchi R., Uyehara O.A., Myers P.S. Welding J. Res. 1969, 48:295-305. Suppl.
11. Goldak J., Chakravarti A., Bibby M. A new finite element model for welding heat sources. Metall. Trans. 1984, 15B:299-305.
12. L.-E. Lindgren, Computational Welding Mechanics: Thermo-mechanical and Microstructural Simulations, August 02, 2007, CRC press.
13. Sundaraman M., Mukhopadhyay P. Carbide precipitation in INCONEL-718. High Temp. Mater. Process 1993, II(1-4):351-368.
14. Knorovsky G.A., Cieslak M.J., Headley T.J., Romig A.D., Hammetter W.F. INCONEL-718: a solidification diagram. Metall. Trans. A 1989, 20A:2149-2158.
15. Simo J.C, Hughes T.J.R. Computational Inelasticity. Interdisciplinary Applied mathematics 1997, 7. Springer-New York.
16. Chiumenti M., Valverde Q., Agelet de Saracibar C., Cervera M. A stabilized formulation for elasticity using linear displacement and pressure interpolations. Comput. Meth. Appl. Mech. Eng. 2002, 191:5253-5264.
17. Chiumenti M., Valverde Q., Agelet de Saracibar C., Cervera M. A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra. Int. J. of Plasticity 2004, 20:1487-1504.
18. Cervera M., Chiumenti M., Valverde Q., Agelet de Saracibar C. Mixed linear/linear simplicial elements for incompressible elasticity and plasticity. Comput. Meth. Appl. Mech. Eng. 2003, 192:5249-5263.
19. Agelet de Saracibar C., Chiumenti M., Valverde Q., Cervera M. On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity. Comput. Meth. Appl. Mech. Eng. 2006, 195:1224-1251.
20. Codina R. Stabilization of incompressibility and convection through orthogonal sub-scales in finite element methods. Comput. Meth. Appl. Mech. Eng. 2000, 190:1579-1599.
21. Codina R. Stabilized finite element approximation of transient incompressible flows using orthogonal subscales. Comput. Meth. Appl. Mech. Eng. 2002, 191:4295-4321.
22. Brezzi F., Fortin M. Mixed and Hybrid Finite Element Methods 1991, Spinger, New York.
23. Radhakrishnan B., Thompson R.G. A phase diagram approach to study liquation cracking in alloy 718. Metall. Trans. A 1991, 22A:887-902.
24. Hunzinker O., Dye D., Roberts S.M., Reed R.C. A coupled approach for the prediction of solidification cracking during the welding of superalloys. Proc. Conf. on Numerical Analysis of Weldability, Graz-Seggau, Austria 1999.
25. Deng D., Murakawa H. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements. Comput. Mater. Sci. 2006, 37:269-277.
26. Deng D., Murakawa H., Liang W. Numerical simulation of welding distortion in large structures. Comput. Meth. Appl. Mech. Eng. 2007, 196:4613-4627.
27. Pokorny M.G., Monroe C.A., Beckermann C., Bichler L., Ravindran C. Prediction of hot tear formation in a magnesium alloy permanent mold casting. Int. J. Metalcasting 2008, 2:41-53.
28. Lemaitre J., Chaboche J.L. Aspects phénoménologiques de la rupturepar endommagement. J. Méc. Appl. 1978, 2:317-365. (in French).
29. Simó J.C., Ju J.W. Strain- and stress-based continuum damage models - I: formulation. Int. J. Solids Struct. 1987, 23:821-840.
30. Clarka D., Bacheb M.R., Whittaker M.T. Shaped metal deposition of a nickel alloy for aero engine applications. J. Mater. Process. Technol. 2008, 203(1-3):439-448.
31. B. Baufelda, O. Van der Biesta, R. Gault, Additive manufacturing of Ti-6Al-4V components by shaped metal deposition: Microstructure and mechanical properties, Materials and Design. Article in press, Accepted 16 November 2009.