Simulation of multipass welding of a thick plate

International Journal for Numerical Methods in Engineering

Volumn 44, Issue 9, 1999, Pages 1301-1316

  Lindgren, Lars Erik ^a   Runnemalm, Henrik ^a   Näsström, Mats O ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

Finite element method; Hole drilling; Residual stresses; Strain gauge method; Thermocouples; Welding

Indexed keywords

BUTT WELDING; COMPUTER SIMULATION; MATHEMATICAL MODELS; PLATE METAL; RESIDUAL STRESSES; STEEL; STRAIN GAGES; THERMOCOUPLES; TRANSIENTS;

MULTIPASS BUTT WELDING;

FINITE ELEMENT METHOD;

EID: 0033096624     PISSN: 00295981     EISSN: None     Source Type: Journal    
DOI: 10.1002/(SICI)1097-0207(19990330)44:9<1301::AID-NME479>3.0.CO;2-K     Document Type: Article

References (39)

1. J. M. J. McDill, J. Goldak, A. S. Oddy and M. J. Bibby, 'Isoparametric quadrilaterals and hexahedrons for mesh grading algorithms', Commun. Appl. Numer. Meth., 3, 155-163 (1987).
2. J. M. J. McDill, A. S. Oddy and J. Goldak, 'An adaptive mesh-management algorithm for three-dimensional automatic finite element analysis', Trans. CSME, 15(1), 57-70 (1991).
3. T. J. R. Hughes, 'Generalization of selective reduced integration procedures to anisotropic and nonlinear media', Int. J. Numer. Meth. Engng., 15, 1413-1418 (1980).
4. K. C. Park and C. A. Felippa, 'Partitioned analysis of coupled systems', Chap. 3, in T. Belytschko and T. J. R. Hughes (eds.), Computational Methods for Transient Analysis, North-Holland, Amsterdam, 1983.
5. R. W. Lewis, K. Morgan, H. R. Thomas and K. N. Seetharamu, The Finite Element Method in Heat Transfer Analysis, Wiley, New York, 1996.
6. K.-J. Bathe and M. R. Khoshgoftaar, 'Finite element formulation and solution of nonlinear heat transfer', Nucl. Engng. Des., 51, 389-401 (1979).
7. R. D. Cook, D. S. Malkus and M. E. Plesha, Concepts and Applications of Finite Element Analysis, Wiley, New York, 1989.
8. E. H. Lee and R. C. McMeeking, 'Concerning elastic and plastic components of deformation', Int. J. Solids Struct., 16, 715-721 (1980).
9. J. Simo and K. S. Pister, 'Remarks on rate constitutive equations for finite deformation problems: computational implications', Comp. Meth. Appl. Mech. Engng., 46, 201-215 (1984).
10. G. C. Johnson and D. J. Bammann, 'A discussion of stress rates in finite deformation problems', Int. J. Solids Struct., 20(8), 725-737 (1984).
11. M. A. Crisfield, Non-Linear Finite Element Analysis of Solids and Structures, Vol. 2, Advanced Topics, Wiley, New York, 1997.
12. T. J. Hughes and J. Winget, 'Finite rotation effects in numerical integration of rate constitutive equations arising in large-deformation analysis', Int. J. Numer. Meth. Engng., 80, 1862-1867 (1980).
13. J. B. Leblond, 'A theoretical and numerical approach to the plastic behaviour of steels during phase transformations - I. Derivation of general relations and - II. Study of classical plasticity for ideal plastic phases', J. Mech. Phys. Solids, 34(4), 395-432 (1986).
14. E. Ramm and A. Matzenmiller, 'Consistent linearization in elasto-plastic shell analysis', Engng. Comput., 5(4), 289-299 (1988).
15. H. L Schreyer, R. F. Kulak and J. M. Kramer, 'Accurate numerical solutions for elastic-plastic models', ASME J. Press Vessel Technol., 101(3), 226-234 (1979).
16. J. C. Simo and R. L. Taylor, 'A return mapping algorithm for plane stress elastoplasticity', Int. J. Numer. Meth. Engng., 22, 649-670 (1986).
17. R. G. Whirley, J. O. Hallquist and G. L. Goudreau, 'An assessment of numerical algorithms for plane stress and shell elastoplasticity on supercomputers', Engng. Comput., 6(2), 116-126 (1989).
18. M. A. Crisfield, Non-Linear Finite Element Analysis of Solids and Structures, Vol. 1, Essentials, Wiley, New York, 1991.
19. J. C. Simo and R. L. Taylor, 'Consistent tangent operators for rate-independent elastoplasticity,' Comp. Meth. Appl. Mech. Engng., 48, 101-118 (1985).
20. E. F. Rybicki, D. W. Schmueser, R. B. Stonesifer, J. J. Groan and H. W. Mishler, 'A finite element model for residual stresses and deflections in girth-butt welded pipes', ASME J. Press. Vessel Technol., 100, 256-262 (1978).
21. E. Rybicki and R. B. Stonesifer, 'Computation of residual stresses due to multipass welds in piping systems', ASME J. Press. Vessel Technol., 101, 149-154 (1979).
22. E. F. Rybicki and R. B. Stonesifer, 'An analysis procedure for predicting weld repair residual stresses in thick-walled vessels', ASME J. Press. Vessel Technol., 102(3), 323-331 (1980).
23. Y. Ueda and T. Yamakawa, 'Analysis of thermal elastic-plastic stress and strain during welding by finite element Method', Trans JWRI, 2(2), 90-100 (1971).
24. Y. Ueda, K. Fukuda, K. Makacho, E. Takahashi and K. Sakamoto, 'Transient and residual stresses from multipass welding in very thick plates and their reduction from stress relief annealing', Proc. 3rd Int. Conf. on Pressure Vessel Technology, pt II, Tokyo, 1977, pp. 925-933.
25. Y. Ueda and H. Murakawa, 'Applications of computer and numerical analysis techniques in welding research', Trans. JWRI, 13, 337-346 (1984).
26. D. W. Lobitz, J. D. McClure and R. E. Nickell, 'Residual stresses and distortions in multi-pass welding', Proc. ASME WAM, Numerical Modeling of Manufacturing Processes, PVP-PB-025, December 1977, pp. 1-18.
27. L. Troive and M. Jonsson, 'Numerical and experimental study of residual deformations due to a double-J multi-pass butt-welding of a pipe-flange joint', Proc. 1994 Annual Int. Conf. on Industry, Engineering and Management Systems, Cocoa Beach, Florida, U.S.A., 1994, pp. 107-114.
28. B. Brickstad and L. Josefson, 'A parametric study of residual stresses in multipass butt-welded stainless steel pipes, SAQ/FoU-Report 96/01, Stockholm, 1996.
29. J. A. Free and R. F. D. Porter Goff, 'Predicting residual stresses in multi-pass weldments with the finite element method', Comp. Struct., 32(2), 365-378 (1989).
30. P. Michaleris, 'Residual stress distributions for multi-pass welds in pressure vessel and piping components', PVP-Vol. 327, ASME Conf. Residual Stresses in Design, Fabrication, Assessment and Repair, 1996.
31. J. Goldak, M. J. Bibby and M. Gu. 'Heat and fluid flow in welds', in T. H. North (ed.), Proc. Int. Institute of welding Congress on Joining Research, Chapman & Hall, London, 1990, pp. 69-82.
32. S. Hyun and L.-E. Lindgren. 'Mesh smoothing techniques for graded elements', in J. Huetink and F. P. T. Baaijers (eds.), Simulation of Materials Processing: Theory, Methods and Applications, Proc. 6th Int. Conf. Numer. Meth. Industrial Forming Processes - Numiform '98, Enschede, Netherlands, 22-25 June 1998, A. A. Balkema, 1998, pp. 109-114.
33. L. Wikander, L. Karlsson, M. Näsström and P. Webster, 'Finite element simulation and measurement of welding residual stresses', Modelling Simul. Mater. Sci. Engng., 2(4), 845-864 (1994).
34. B. A. B. Andersson. 'Thermal stresses in submerged-arc-welded joint considering phase transformations', J. Engng. Mater. Technol., 100, 356-362 (1987).
35. M. Jonsson, L. Karlsson and L.-E. Lindgren, 'Deformations and stresses in butt-welding', in R. W. Lewis and K. Morgan (eds.), Numerical Methods in Heat Transfer, Vol III, Wiley, New York, 1985, pp. 35-58.
36. Metals Handbook, 1 Properties and Selections: Iron and Steels, ASM, Cleveland, 1978.
37. F. Richter, Die Wichtigsten Physikalischen Eigenschaften von 52 Eisenwerkstoffen, Stahleisen Sonderberichte Heft 8, Verlag Stahleisen, Düsseldorf, 1973.
38. H. Suzuki et al., 'Studies on the flow stress of metals and alloys', Report of the institute of industrial science, University of Tokyo, vol. 18, No. 3, 1968.
39. A. A. Scaramangas, R. F. D. Porter Goff and R. H. Leggat, 'On the correction of residual stress measurements obtained using the centre-hole method', Strain, 18, 88-97 (1982).