Modelling of metal deposition

Finite Elements in Analysis and Design

Volumn 47, Issue 10, 2011, Pages 1169-1177

  Lundbäck, Andreas ^a   Lindgren, Lars Erik ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

FEM; Metal deposition; Physically based material model; Simulation; Validation; Welding

Indexed keywords

DEFORMATION; DEPOSITION; FINITE ELEMENT METHOD; STRAIN RATE; TEMPERATURE MEASUREMENT; WELDING; WELDS;

DEFORMATION MEASUREMENTS; MATERIAL MODELING; METAL DEPOSITION; MODELLING AND SIMULATIONS; MULTI-PASS WELDING; OFF LINE PROGRAMMING; SIMULATION; VALIDATION;

METALS;

EID: 79957852655     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.finel.2011.05.005     Document Type: Article

References (43)

1. D. Clark, M.R. Bache, and M.T. Whittaker Shaped metal deposition of a nickel alloy for aero engine applications Journal of Materials Processing Technology 203 2008 439 448
2. J. Mazumder, D. Dutta, N. Kikuchi, and A. Ghosh Closed loop direct metal deposition: art to part Optics and Lasers in Engineering 34 2000 397 414 (Pubitemid 32196166)
3. L. Thivillon, P. Bertrand, B. Laget, and I. Smurov Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components Journal of Nuclear Materials 385 2009 236 241
4. S.H. Mok, G. Bi, J. Folkes, and I. Pashby Deposition of Ti6Al4V using a high power diode laser and wire, Part I: investigation on the process characteristics Surface and Coatings Technology 202 2008 3933 3939 (Pubitemid 351494500)
5. P. Wanjara, M. Brochu, and M. Jahazi Electron beam freeforming of stainless steel using solid wire feed Materials and Design 28 2007 2278 2286 (Pubitemid 46796715)
6. L.-E. Lindgren Computational Welding Mechanics. Thermomechanical and Microstructural Simulations 2007 Woodhead Publishing
7. L.-E. Lindgren Finite element modelling and simulation of welding, part 1 increased complexity Journal of Thermal Stresses 24 2001 141 192
8. L.-E. Lindgren Finite element modelling and simulation of welding, part 2 improved material modelling Journal of Thermal Stresses 24 2001 195 231
9. L.-E. Lindgren Finite element modelling and simulation of welding, part 3 efficiency and integration Journal of Thermal Stresses 24 2001 305 334
10. L.E. Lindgren Numerical modelling of welding Computer Methods in Applied Mechanics and Engineering 195 2006 6710 6736
11. D. Radaj Welding Residual Stresses and Distortion. Calculation and Measurement 2003 DVS-Verlag
12. J. Goldak, and M. Akhlagi Computational Welding Mechanics 2005 Springer
13. Y. Ueda, E. Takahashi, K. Fukuda, K. Sakamoto, and K. Nakacho Transient and residual stresses from multipass welding in very thick plates and their reduction from stress relief annealing Transaction of Japan Welding Research Institute 5 1976 179 187
14. Y. Ueda, K. Fukuda, K. Nakacho, E. Takahashi, K. Sakomoto, Transient and residual stresses from multipass welding in very thick plates and their reduction from stress relief annealing, in: Proceedings of the 3rd International Conference on Pressure Vessel Technology, Tokyo, 1977, pp. 925933. (Pubitemid 8608021)
15. D. Lobitz, J. McClure, R. Nickell, Residual stresses and distortions in multi-pass welding, in: Proceedings of the ASME Winter Annual Meeting Numerical Modeling of Manufacturing Processes, 1977, pp. 1.
16. E. Rybicki, D. Schmueser, R. Stonesifer, J. Groom, H. Mishler, A finite element model for residual stresses in girth-butt welded pipes, in: Numerical modeling of manufacturing processes, Proceedings of the ASME Winter annual meeting, 1977, pp. 131142. (Pubitemid 8555114)
17. E.F. Rybicki, D.W. Schmueser, R.B. Stonesifer, J.J. Groom, and H.W. Mishler A finite-element model for residual stresses and deflections in girth-butt welded pipes ASME Journal of Pressure Vessel Technology 100 1978 256 262 (Pubitemid 8624445)
18. M. Li, D. Atteridge, L. Meekisho, and S. West A 3D finite element analysis of temperature and stress fields in girth welded 304L stainless steel pipe H. Smartt, J. Johnson, S. David, Proceedings of the 4th International Conference on Trends in Welding Research 1995 ASM International Gatlinburg, USA 51 56
19. M. Li, D. Atteridge, W. Anderson, C. Hubbard, and S. Spooner An experimental analysis of temperature and stress fields in girth welded 304 L stainless steel pipes H. Smartt, J. Johnson, S. David, Proceedings of the 4th International Conference on Trends in Welding Research 1995 ASM International Gatlinburg, USA 67 72
20. S. Fricke, E. Keim, J. Schmidt, Fracture mechanics investigation of root formation and shrinkage during welding. in: Proceedings of the ASME Pressure Vessel and Piping Conference, 1998, pp. 137141. (Pubitemid 128551639)
21. S. Fricke, E. Keim, and J. Schmidt Modelling of root formation during the welding process with the help of the 3d fe method H. Cerjak, Mathematical Modelling of Weld Phenomena, vol. 4 1998 The Institute of Materials Graz, Austria 649 657
22. J. Dike, C. Cadden, R. Corderman, C. Schultz, and M. McAninch Finite element modeling of multipass GMA welds in steel plates H. Smartt, J. Johnson, S. David, Proceedings of the 4th International Conference on Trends in Welding Research 1995 ASM International Gatlinburg, USA 57 66
23. A. Chakravarti, L. Mali, J. Goldak, Prediction of distortion and residual stresses in panel welds, in: Computer Modelling of Fabrication Processes and Constitutive Behaviour of Metals, Ottawa, Canada, 1986, pp. 547561.
24. E. Rybicki, and R. Stonesifer Computation of residual stresses due to multipass welds in piping systems ASME Journal of Pressure Vessel Technology 192 1980 323 331
25. E. Rybicki, J. Shadley, A. Sandhu, and R. Stonesifer Experimental and computational residual stress evaluation of a weld clad plate and machined test specimen ASME Journal of Engineering Materials and Technology 110 1988 297 304
26. P. Dupas, D. Moinereau, The evaluation of residual stresses in clad plates by measurement and numerical simulation, in: Proceedings of the Fifth International Conference on Computer Technology in Welding, The Welding Institute, Cambridge, 1994, paper 40.
27. A. Oddy, J. McDill, J. Braid, J. Root, F. Marsiglio, Predicting residual stresses om weaved repair welds, in: Proceedings of the 5th International Conference on Trends in Welding Research, Mount Pine, Georgia, USA, 1998.
28. L.-E. Lindgren, H. Runnemalm, and M.O. Nasstrom Simulation of multipass welding of a thick plate International Journal of Numerical Methods and Engineering 44 1999 1301 1316
29. M. Mughal, H. Fawad, and R. Mufti Finite element prediction of thermal stresses and deformations in layered manufacturing Acta Mechanica 183 2006 61 79 (Pubitemid 43814296)
30. E. Toyserkani, A. Khajepour, and S. Corbin 3-D finite element modelling of laser cladding by powder injection: effects of laser pulse shaping on the process Optics and Lasers Engineering 41 2004 849 867
31. J.-D. Kim, and Y. Peng Melt pool shape and dilution of laser cladding with wire feeding Journal of Materials Processing Technology 104 2000 284 293
32. G. Zhao, C. Cho, and J.-D. Kim Application of 3-D finite element method using Lagrangian formulation to dilution control in laser cladding process International Journal of Mechanical Sciences 45 2003 777 796
33. A. Lundbäck CAD-support for heat input in FE-model H. Cerjak, Mathematical Modelling of Weld Phenomena, vol. 6 2002 The Institute of Materials Graz, Austria 491 518
34. L.-E. Lindgren, and E. Hedblom Modelling of addition of filler material in large deformation analysis of multipass welding Communications in Numerical Methods in Engineering 17 2001 647 657 (Pubitemid 32901638)
35. A. Lundbäck, Modelling of weld path for use in simulations, Department of Mechanical Engineering, Luleå, Sweden: Luleå University of Technology, 2000.
36. J. Goldak, A. Chakravarti, M. Bibby, and A. New Finite Element Model for Welding Heat Sources Metallurgical Transactions B 15B 1984 299 305 (Pubitemid 14583868)
37. Alfred Seeger The mechanism of glide and work hardening in FCC and HCP metals, dislocations and mechanical properties of crystals J.C. Fisher, W.G. Johnston, R. Thomson, T. Vreeland Jr., 1956 John Wiely & Sons Lake Placid, USA pp. 243329
38. H. Mecking, and U.F. Kocks Kinetics of flow and strain-hardening Acta Metallurgica 29 1981 1865 1875
39. Y. Bergström The plastic deformation of metals - a dislocation model and its applicability Reviews on Powder Metallurgy and Physical Ceramics 1983 79 265
40. M. Militzer, W.P. Sun, and J.J. Jonas Modelling the effect of deformation-induced vacancies on segregation and precipitation Acta Metallurgica et Materialia 42 1994
41. L.-E. Lindgren, K. Domkin, and H. Sofia Dislocations, vacancies and solute diffusion in physical based plasticity model for AISI 316L Mechanics of Materials 40 2008 907 919
42. B. Babu, Physically based model for plasticity and creep of Ti6Al4V, Department of Applied Physics and Mechanical Engineering, Luleå, Sweden: Luleå University of Technology, 2008.
43. GOM, Optical Measuring Techniques, 〈 http://www.gom.com 〉.