Modeling and Experimental verification of transient/residual stresses and microstructure formation of multi-layer laser aided DMD process

Journal of Heat Transfer

Volumn 128, Issue 7, 2006, Pages 662-679

  Ghosh, S ^a   Choi, J ^a  

^a University of Missouri Rolla   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; HEAT TRANSFER; MICROSTRUCTURE; PHASE INTERFACES; PHASE TRANSITIONS; RESIDUAL STRESSES; SOLIDIFICATION; THERMAL STRESS;

LASER AIDED DIRECT METAL/MATERIAL DEPOSITION (LADMD) PROCESS; SOLIDIFICATION MICROSTRUCTURE; THERMALLY INDUCED RESIDUAL STRESSES;

PULSED LASER DEPOSITION;

COMPUTER SIMULATION; FINITE ELEMENT METHOD; HEAT TRANSFER; MICROSTRUCTURE; PHASE INTERFACES; PHASE TRANSITIONS; PULSED LASER DEPOSITION; RESIDUAL STRESSES; SOLIDIFICATION; THERMAL STRESS;

EID: 33746764391     PISSN: 00221481     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2194037     Document Type: Article

References (35)

1. Mazumder, J., Choi, J., Nagarathnam, K., Koch, J., and Hetzner, D., 1997, "The Direct Metal Deposition of H13 Tool Steel for 3-D Components," JOM, 49(5), pp. 55-60.
2. Choi, J., and Chang, Y., 2005, "Characteristics of Laser Aided Direct Metal Deposition Process for Tool Steel," Int. J. Mach. Tools Manuf., 45(4-5), pp. 597-607.
3. Klingbeil, N. W., Beuth, J. L., Chin, R. K., and Amon, C. H., 2002, "Residual Stress-Induced Warping in Direct Metal Solid Freeform Fabrication," Int. J. Mech. Sci., 44, pp. 57-77.
4. Nickel, A. H., Barnett, D. M., and Prinz, F. B., 2001, "Thermal Stresses and Deposition Patterns in Layered Manufacturing," Mater. Sci. Eng., A, 317, pp. 59-64.
5. Inoue, T., 2002, "Metallo-Thermo-Mechanics- Application to Quenching," Handbook of Residual Stress and Deformation of Steel, ASM International, Materials Park, OH, pp. 296-311.
6. Inoue, T., Ju, D. Y., and Arimoto, K., 1992, "Metallo-Thermo-Mechanical Simulation of Quenching Process - Theory and Implementation of Computer Code - Hearts," Proceedings of the First International Conference on Quenching & Control of Distortion, Chicago, IL, 22-25 September, pp.205-212.
7. Kahlen, F.-J., and Kar, A., 2001, "Residual Stresses in Laser-Deposited Metal Parts," J. Laser Appl., 13(12), pp. 60-69.
8. Dai, K., and Shaw, L., 2001, "Thermal and Stress Modeling of Multi-Material Laser Processing," Acta Mater., 49, pp. 4171-4181.
9. Bokota, A., and Iskierka, S., 1996, "Effect of Phase Transformation on Stress States in Surface Layer Laser Hardened Carbon Steel," ISIJ Int., 36(11), pp. 1383-1391.
10. Das, S., Upadhya, G., and Chandra, U., 1992, "Prediction of Macro-and Micro-Residual Stress in Quenching using Phase Transformation Kinetics," Proceedings of the First International Conference on Quenching & Control of Distortion, ASM International, Chicago, IL, pp. 229-234.
11. Kirkaldy, J. S., and Venugopalan, D., 1983, "Prediction of Microstructure and Hardenability in Low Alloy Steels," Proceedings of the International Conference on Phase Transformations in Ferrous Alloys, A publication of The Metallurgical Society of AIME, October 4-6, Philadelphia, PA, pp. 125-148.
12. Watt, D. F., Coon, L., Bibby, M., Goldak, J., and Henwood, C., 1988, "An Algorithm for Modeling Microstructural Development in Weld Heat-Affected Zones (Part A) Reaction Kinetics," Acta Metall., 36(11), pp. 3029-3035.
13. Ashby, M. F., and Easterling, K. E., 1982, "A First Report on Diagrams for Grain Growth in Welds," Acta Metall., 30, pp. 1969-1978.
14. Oddy, A. S., Goldak, J. A., and McDill, J. M. J., 1989, "Transformation Effects in the 3D Finite Element Analysis of Welds," Proceedings of the Second International Conference on Trends in Welding Research, ASM International, Gatlinburg, TN, May 15-19.
15. Jarvstrat, N., and Sjostrom, S., 1993, "Current Status of TRAST; A Material Model Subroutine System for the Calculation of Quench Stresses in Steel," ABAQUS User's Conference Proceedings .
16. Denis, S., 1996, "Considering Stress-Phase Transformation Interactions in the Calculation of Heat Treatment Residual Stresses," J. Phys. IV, 6, pp. C1 159-Cl 174.
17. Roelens, J. B., Maltrud, F,. and Lu, J., 1994, "Determination of Residual Stresses in Submerged Arc Multi-Pass Welds by means of Numerical Simulation and Comparison with Experimental Results," Weld. World, 33(3), pp. 152-159.
18. Choi, J., and Mazumder, J., 2002, "Numerical and Experimental Analysis for Solidification and Residual Stresses in GMAW process for AISI 304 Stainless Steel," J. Mater. Sci., 37, pp. 2143-2158.
19. Tekriwal, P., and Mazumder, J., July 1991, "Transient and Residual Thermal Strain-Stress Analysis of GMAW," J. Eng. Mater. Technol., 113, pp. 336-343.
20. Kurz, W., and Fisher, J., 1990, Fundamentals of Solidification, Trans Tech Aedermannsdorf, Switzerland.
21. Wang, G. X., and Prasad, V., 2000, "Microscale Heat and Mass Transfer and Non-equilibrium Phase Change in Rapid Solidification," Mater. Sci. Eng., A, 292, pp. 142-148.
22. Trivedi, R., and Kurz, W., 1994, "Solidification Microstructures: A Conceptual Approach," Phys. Met. Metallogr., 42(1), pp. 15-23.
23. Ode, M., Kim, S. G., Kim, W. T., and Suzuki, T., 2001, "Numerical Prediction of the Secondary Dendrite Arm Spacing using a Phase-Field Model," ISIJ Int., 41(4), pp. 345-349.
24. Aziz, M. J., 1982, "Model for Solute Redistribution during Rapid Solidification," J. Appl. Phys., 53(2), pp. 1158-1168.
25. Calrslaw, H. S., and Jaeger, J. C., 1959, Conduction of Heat in Solids, 2nd ed., Oxford University Press, Oxford.
26. Ghosh, S., and Choi, J., 2005, "Three-Dimensional Transient Finite Element Analysis for Residual Stresses in the Laser Aided Direct Metal/ Material Deposition Process," J. Laser Appl., 17(3), pp. 144-158.
27. ABAQUS/Standard User's Manual and Keywords Manual, version 6.4.
28. Touloukian, Y. S., and Ho, C. Y., 1970, Thermo Physical Properties of Matter-The TPRC Data Series by Purdue University, IFI/Plenum Data Corp., New York.
29. Ghosh, S., 2003, "Three-Dimensional Transient Residual Stress FE Analysis for Single and Double Pass Laser Aided Direct Metal/Material Deposition Process," University of Missouri- Rolla, M.S. thesis.
30. Gordon, R., and Cobonque, J., 1961, "Heat Transfer between a Flat Plate and Jets of Air Impinging on it,"International Conference on Heat Transfer, Part II, pp. 454-460.
31. Steen, W. M., 1976, "The Printing of Laser Generated Heat Images in Cobalt Oxide on Glass Substrates," Ph.D. thesis, Imperial College, London.
32. Boyer, H. E., and Gray, A. G., 1977, "Atlas of Isothermal Transformation and Cooling Transformation Diagrams," American Society for Metals, Metals Park, OH.
33. Pfoetsch, and Ruud, Penn State Univ., Univ. Park, Pennsylvania, ICDD Grantin-Aid, 1982 and 1984.
34. Choi, J., and Mazumder, J., 1994, "Non-Equilibrium Synthesis of Fe-Cr-C-W alloy by Laser Cladding," J. Mater. Sci., 29, pp. 4460-4476.
35. Choi, J., Choudhuri, S. K., and Mazumder, J., 2000, "Role of Preheating and Specific Energy Input on the Evolution of Microstructure and Wear Properties of Laser Clad Fe-Cr-C-W Alloys," J. Mater. Sci., 35, pp. 3213-3219.