Finite element modeling and simulation of welding. part 2: Improved material modeling

Journal of Thermal Stresses

Volumn 24, Issue 3, 2001, Pages 195-231

  Lindgren, Lars Erik ^a  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0009734155     PISSN: 01495739     EISSN: 1521074X     Source Type: Journal    
DOI: 10.1080/014957301300006380     Document Type: Article

References (169)

1. J. Goldak, M. Gu, K. Paramjeet and M. Bibby, Computer simulation of welding processes, ASME Winter Annual Meeting Symp. on Computer Modeling and Simulation of Manufacturing Processes, Production Engineering Division, p. 193, 1990.
2. L-E. Lindgren, The Use of Simulations and the Need of Experiments in Material Processing, The sixth Cairo International MDP Conference, p. 149, 1996.
3. J. Goldak, Modeling thermal stresses and distortions in welds, Proc. of the 2nd Int. Conf. on Trends in Welding Research, p. 71, 1989.
4. J.M.J. McDill, A.S. Oddy, J.A. Goldak and S. Bennisson, Finite Element analysis of weld distortion in carbon and stainless steels, Journal of Strain Analysis for Engineering Design, vol. 25, no. 1, pp. 51-53, 1990.
5. J.B. Leblond, D. Pont, J. Devaux, D. Nru and J.M. Bergheau, Metallurgical and mechanical consequences of phase transformations in numerical simulations of welding processes, in L. Karlsson (ed.), Modeling in Welding, Hot Powder Forming and Casting, pp. 61-89, 1997.
6. E.F. Rybicki, D.W. Schmueser, R.B. Stonesifer, J.J. Groom andH.W. Mishler, A finite element model for residual stresses in girth-butt welded pipes, ASME Winter annual meeting Numerical modeling of manufacturing processes, p. 131, 1977.
7. E.F. Rybicki, D.W. Schmueser, R.B. Stonesifer, J.J. Groom andH.W. Mishler, A finite element model for residual stresses and deflections in girth-butt welded pipes, ASMEJ. Pressure Vessel Technology, vol. 100, August, pp. 256-262, 1978.
8. Y. Ueda, K. Nakacho and T. Shimuzu, Improvement of residual stresses of circumferential joint of pipe by heat-sink welding, ASME J. Pressure Vessel Technology, vol. 108, Feb., pp. 14-23, 1986.
9. S. Brown and H. Song, Finite element simulation of welding of large structures, J. Eng. for Industry, vol. 114, pp. 441-451, 1992.
10. S. Brown and H. Song, Implications of three-dimensional numerical simulations of welding of large structures, Welding Journal, vol. 114, pp. 55s-62s, 1992.
11. L-E. Lindgren, H-A. Haggblad, J.M.J. McDill and A.S. Oddy, Automatic remeshing for three-dimensional finite element simulation of welding, Computer Methods in Applied Mechanics and Engineering, vol. 147, pp. 401-409, 1997.
12. E. Friedman, Thermomechanical analysis of the welding process using the finite element method, ASME J. Pressure Vessel Technology, vol. 97, no. 3, Aug., pp. 206-213, 1975.
13. R.E. Nickell and H.D. Hibbitt, Thermal and mechanical analysis of welded structures, Nuclear Eng and Design, vol. 32, pp. 110-120, 1975.
14. Y. Ueda, K. Iida, M. Saito and A. Okamoto, Finite element modeling and residual stress calculation for multi-pass single welded joint between a plate and the penetrating pipe, Proc. of the 5th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 219, 1991.
15. Y. Ueda and T. Yamakawa, Thermal stress analysi s of metals with temperature dependent mechanical properties, Proc. Int. Conf. Mech. Behaviour of Materials, p. 10, 1971.
16. H.D. Hibbitt and P.V. Marcal, A Numerical Thermo-Mechanical Model for the Welding and Subsequent Loading of a Fabricated Structure, Computers Structures, vol. 3, pp. 1145-1174, 1973.
17. D.H.B. Mok and R.J. Pick, Finite element study of residual stresses in a plate T-joint fatigue specimen, Proc. Inst. Mech. Eng. Part C, J. Mech. Eng. Sci., vol. 204, no C2, pp. 127-134, 1990.
18. Y. Shim, Z. Feng, S. Lee, D. Kim, J. Jaeger, J.C. Papritan and C.L. Tsai, Determination of residual stresses in thick-section weldments, Welding Journa, Sep., pp. 305s-312s, 1992.
19. P. Michaleris, Residual stress distributions for multi-pass welds in pressure vessel and piping components, ASME Pressure Vessel and Piping Conference, Residual Stresses in Design, Fabrication, Assessment and Repair, PVP-Vol. 327, p. 17, 1996.
20. G. Ravichandran, V.P. Raghupathy, N. Ganesan and R. Krishnakumar, Prediction of axis shift distortion during circumferential welding of thin pipes using the finite element method, Welding Journal Research Supplement, January, pp. 39s-55s, 1997.
21. L-E. Lindgren, H. Runnemalm and M.O. Nasstrom, Numerical and experimental investigation of multipass welding of a thick plate, International Journal for Numerical Methods in Engineering, vol. 44, no. 9, pp. 1301-1316, 1999.
22. J.K. Hepworth, Finite element calculation of residual stresses in welds, in Taylor, Owen and Hinton (eds), Proc. of Int. Conf. for Non.linear Problems, p. 51, 1980.
23. J.A. Free and R.F.D. Porter Goff, Predicting residual stresses in multi-pass weldments with the finite element method, Computers Structures, vol. 32, no. 2, pp. 365-378, 1989.
24. J. Caiias, R. Picon, F. Paris and J.C. Marin, Experimental and numerical analysis of residual stresses in welded Al-5083-0 aluminium plates, Computers Structures, vol. 58, no. 1, pp. 59-69, 1996.
25. K.W. Mahin, S. MacEwen, W. Winters, W. Mason, M. Kanouff and E.A. Fuchs, Evaluation of residual stress distributions in a traveling GTA weld using finite element and experimental techniques, Proc. Modeling of Casting and Welding Processes IV, The Minerals, Metals Materials Societ, p. 339, 1988.
26. K.W. Mahin, W. Winters, T.M. Holden, R.R. Hosbons and S.R. MacEwen, Prediction and measurements o residual elastic strain distributions in gas tungsten arc welds, Welding Journal, vol. 70, no. 9, pp. 245s-260s, 1991.
27. Y. Ueda and T. Yamakawa, Analysis of thermal elastic-plastic stress and strain during welding by finite element method, JWRI, vol. 2, no. 2, pp. 90-100, 1971.
28. B.A.B. Andersson, Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformations, ASME J. Engineering Materials and Technology, vol. 100, pp. 356-362. 1978.
29. Y. Ueda, E. Takahashi, K. Fukuda, K. Sakamoto and K. Nakacho, Transient and residual stresses from multipass welding in very thick plates and their reduction from stress relief annealing, JWRI, vol. 5, no. 2, pp. 179-187, 1976.
30. Y. Ueda, K. Fukuda, K. Nakacho, E. Takahashi and K. Sakamoto, Transient and residual stresses from multipass welding in very thick plates and their reduction from stress relief annealing, Proc. of 3rd Int. Conf on Pressure Vessel Technology, pt II, p. 925, 1977.
31. B.L. Josefson, Residual stresses and their redistribution during annealing of a girth-butt welded thin-walled pipe, ASME J. Pressure Vessel Technology, vol. 104, pp. 245-250, 1982.
32. M. Jonsson, L. Karlsson and L-E. Lindgren, Deformations and stresses in butt-welding of large plates, in R.W. Lewis (ed.), Numerical Methods in Heat Transfer, vol. 3, p. 35, Wiley, 1985.
33. L. Troive, L. Karlsson, M. Nasstrom, P. Webster and K.S. Low, Finite element simulations of the bending of a flat plate to U-shaped beam cross-section and the welding to rectangular hollow cross-section and neutron diffraction determination of residual stresses, Proc. of the 2nd Int. Conf. on Trends in Welding Research, p. 107, 1989.
34. R.I. Karlsson and B.L. Josefson, Three-Dimensional Finite Element Analysis of Temperatures and Stresses in a Single-Pass Butt-Welded Pipe, ASME J. Pressure Vessel Technology, vol. 112, pp. 76-84, 1990.
35. K. Kussmaul, E. Roos andW. Guth, A contribution to the numerical and experimental determination of residual stresses in welds, Nuclear Engineering and Design, vol. 122, pp. 337-348, 1989.
36. L-E. Lindgren, A. Carlestam and M. Jonsson, Computational model of flame-cutting, ASME J. Engineering Materials and Technology, vol. 115, pp. 440-445, 1993.
37. O. Voss, I. Decker and H. Wohlfahrt, Simulation of structural changes in the HAZ during laser beam welding, Proc. of the 8th Int. Conf. on Computer Technology in Welding, Abington Publishing, p. 239, 1998.
38. O. Voss, I. Decker and H. Wohlfahrt, Consideration of microstructural transformations in the calculation of residual stresses and distortion of larger weldments, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 4, Institute of Materials, London, p. 584, 1998.
39. V.J. Papazoglou and K. Masubuchi, Numerical analysis of thermal stresses during welding including phase transformation effects, ASME J. Pressure Vessel Technology, vol. 104, August, pp. 198-203, 1982.
40. A.S. Oddy, J.A. Goldak and M. McDill, Transformation Effects in the 3D Finite Element Analysis of Welds, Proc. of the 2nd Int. Conf. on Trends in Welding Research, p. 97, 1989.
41. Y.V.L.N. Murthy, G. Venkata Rao and P. Krishna Iyer, Numerical simulation of welding and quenching processes using transient thermal and thermo-elasto-plastic formulations, Computers Structures, vol. 60, no. 1, pp. 131-154, 1996.
42. L-E. Lindgren and L. Karlsson, Deformations and stresses in welding of shell structures, International Journal for Numerical Methods in Engineering, vol. 25, pp. 635-655, 1988.
43. B. L. Josefsonm, and C. T. Karlsson, Transformation plasticity effects in residual stresses in a butt-welded pipe, ASME J. Pressure Vessel Technology, vol. 114, pp. 376-378, 1992.
44. T. Inoue and Z.G. Wang, High temperature behaviour of steels with phase transformation and the simulation of quenching and welding processes, Proc. of 4th Int. Conf. Mechanical Behaviour of Materials, p. 1015, 1983.
45. Z.G. Wang and T. Inoue, A viscoplastic constitutive relationship with phase transformation and the application to the process of welding, Proc. of the 4th Int. Conf. of Mechanical Behaviour of Materials, p. 474, 1983.
46. Z.G. Wang and T. Inoue, Viscoplastic constitutive relation incorporating phase transformation -application to welding, Material Science and Technology, vol. 1, Oct. pp. 899-903, 1985.
47. J.M. Bergheau, and J.B. Leblond, Coupling between heat flow, metallurgy and stress-strain computations in steels: the approach developed in the computer code Sysweld for welding or quenching, Proc. of the 5th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 203, 1991.
48. J. Devaux, D. Pont and J.B. Leblond, Numerical simulation of the repair of a defect-containing zone by a manual welding procedure, Proc. of ASME 10th Conf. on Offshore and Arctic Engineering (OMAE), vol. 3-A Materials Eng., p. 31, 1991.
49. T. Inoue, Metallo-thermo-mechanics, JWRI, vol. 25, no. 2, pp. 69-87, 1996.
50. T. Inoue, Residual stresses and distortion metallo-thermo-mechanics: simulation of engineering processes incorporating phase transformation, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 4, Institute of Materials, London, pp. 547, 1998.
51. J-B. Roelens, F. Maltrud and J. Lu, Determination of residual stresses in submerged arc multi-pass welds by means of numerical simulation and comparison with experimental measurements, Welding in the World, vol. 33, no. 3, pp. 152-159, 1994.
52. J-B. Roelens, Numerical simulation of multipass submerged arc welding - determination of residual stresses and comparison with experimental measurements, Welding in the World, vol. 35, no. 2, pp. 110-117, 1995.
53. J-B. Roelens, Determination of residual stresses in submerged arc multi-pass welds by means of numerical simulation and comparisons with experimental measurements, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 2, The Institute of Materials, pp. 226-241, 1995.
54. L. Borjesson and L-E. Lindgren, Simulation of multipass welding using mixture rules for prediction of material properties, NUMIFORM'98 The Sixth International Conference on Numerical Methods in Industrial Forming Processes, p. 351, 1998.
55. L. Borjesson and L-E. Lindgren, Simulation of multipass welding with simultaneous computation of material properties, will appear in ASME J. Eng. Mater. Technol., 2001.
56. H.K.D.H. Bhadeshia, Models for the elementary mechanical properties of steel welds, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, Th eInstitute of Materials, p. 229, 1997.
57. S. Das, U. Upadhya, U. Chandra, M.J. Kleinosky and M.L. Tims, Finite element modeling of a single-pass GMA weldment, Proc. of the 6th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 593, 1993.
58. L. Dufrene, J. Truc and R. Martin, Modeling of thermal stresses during an electron-beam welding process, Journal of Thermal Stresses, vol. 19, pp. 211-238, 1996.
59. J. Ronda, H. Murakawa, G.J. Oliver and Y. Ueda, Thermo-mechanical-metallurgical model of welded steel. Part 2. Finite element formulation and constitutive equations, JWRI, vol. 24, pp. 93-113, 1995.
60. J. Ronda and G.J. Oliver, Consistent thermo-mechano-metallurgical model of welded steel with unified approach to derivation of phase evolution laws and transformation induced plasticity. Computer Methods in Applied Mechanics and Engineering, vol. 189, no. 2, pp. 361-418, 2000.
61. O.R. Myhr, O. Grong, S. Klokkehaug, H.G. Fjsr and A.O. Kluken, Process model for welding of Al-;g-So extrusions Part 1: Precipitate stability, Science and Technology of Welding and Joining, vol. 2, no. 6, pp. 245-253, 1997.
62. O.R. Myhr, S. Klokkehaug, O. Grong, H.G. Fjsr and A.O. Kluken, Modeling of microstructure evolution, residual stresses and distortions in 6082-T6 aluminium weldments, Welding Journal, vol. 77, no. 7, pp. 286s-292s, 1998.
63. O.R. Myhr, A.O. Kluken, S. Klokkehaug, H.G. Fjsr and O. Grong, Modeling of microstructure evolution and residual stresses in processing and welding of 6082 and 7108 aluminium alloys, Proc. of the 5th Int. Conf. on Trends in Welding Research, p. 233, 1998.
64. O Grong, Metallurgical Modelling of Welding, The Institute of Materials, 1994.
65. O. Grong, Metallurgical modelling of welding of aluminium alloys, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 313, 1997.
66. Y. Dong, J.K. Hong, C.L. Tsai and P. Dong, Finite element modeling of residual stresses in austenitic stainless steel pipe girth welds, Welding Journal, pp. 442s-449s, 1997.
67. L-E. Lindgren, Temperature fields in simulation of butt-welding of large plates, Comm. in Appl. Numer. Methods, vol. 2, pp. 155-164, 1986.
68. P. Dong, Analysis of repair weld residual stresses in vessel-type structures, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 666, 1997.
69. R.C. Reed, H.J. Stone, S.M. Roberts and J.M. Robinson, The development and validation of a model for the electron beam welding of aero-engine components, Proc. of Inst. of Mech. Eng., Part G, J of Aerospace Eng., vol. 211, no G:6, pp. 421-428, 1997.
70. J. Goldak, B. Patel, M. Bibby and J. Moore, Computational weld mechanics, AGARD Workshop -Structures and Materials 61st Panel meeting,1985.
71. J.E. Moore, M.J. Bibby and J.A. Goldak, A comparison of the point source andfinite element schemes for computing weld cooling, Welding Research: The State of the Art, Proc. of 1985 Int. Welding Congress in junction with ASM Materials Week’85, p. 1 1985.
72. D. Dubois, J. Devaux and J.B. Leblond, Numerical Simulation of aWelding Operation: Calculation of Residual Stresses and Hydrogen Diffusion, Fifth International Conference on Pressure Vessel Technology, vol. 2, p. 1210, 1984.
73. F. Richter, Die wichtigsten physikalischen Eigenschaften von 52 Eisenwerkstoffen, Heft 8, Stahleisen - Sonderberichte, Verlag Stahleisen, Düsseldorf, Germany, 1973.
74. R.D. Pehlke, A. JeyarajanandH. Wada, SummaryofThermalPropertiesforCastingAlloys and Mold Materials, NTIS PB8321100 3,1982.
75. L. Karlsson, Thermal stresses in welding, in R.B. Hetnarski (ed.), Thermal Stresses, vol. 1, Elsevier Science Publishers, p. 300, 1986.
76. W.D. Rolph and K-J. Bathe, An efficient algorithm for analysis of non linear heat transfer with phase changes, Int. J. Numerical Methods in Engineering, vol. 18, pp. 119-134, 1982.
77. R.W. Lewis, K. Morgan, H.R. Thomas and K. N. Seetharamu, The Finite Element Method in Heat Transfer Analysis, Wiley, 1996.
78. Z. Feng, A computational analysis of thermal and mechanical conditions for weld solidification cracking, Welding in the World, vol. 33, no. 5, pp. 340-347, 1994.
79. Z. Feng, T. Zacharia and S.A. David, On the thermomechanical conditions for weld metal solidification cracking, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 114, 1997.
80. C.K. Leung and R.J. Pick, The U se of Generalized Plane Strain Elements in the Prediction of Residual Stresses in Welded Flat Plates, Proc. of the Symposium on The Computer Modelling of Fabrication Processes and Constitutive Behavior of Metals, p. 563, 1986.
81. P. Michaleris and A. DeBiccari, Prediction of welding distortion, Welding Journal, vol. 76, no 4, pp. 172s-181s, 1997.
82. J. Ronda and G.J. Oliver, Comparisons of applicability of various thermo-viscoplastic constitutive models in modelling of welding, Computer Methods in Applied Mechanics and Engineering, vol. 153, no. 3-4, pp. 195-221, 1998.
83. E. Pardo and D.C. Weckman, Prediction of weld pool and reinforcement dimensions of GMA welds using a finite-element model, Metallurgical Trans B., vol. 20B, pp. 937-946, 1989.
84. J.C. Simo, A framework for finite strain elastoplasticity based on maximum plastic dissipation and the multiplicative decomposition, Computer Methods in Applied Mechanics and Engineering, vol. 66, pp. 199-219, 1988.
85. J.C. Simo and T. J. R. Hughes, Computational Inelasticity, Springer Verlag, 1997.
86. J. Canas, R. Picren, A. Blazquez, and J.C. Marin, A simplified numerical analysis of residual stresses in aluminium welded plates, Welding International, vol. 8, no. 1, pp. 39-44, 1994.
87. Y. Fujita, Y. Takeshi, M. Kitamura and T. Nomoto, Welding stresses with special reference to cracking, IIW Doc X-655-72, 1972.
88. Y. Ueda, Y.C. Kim, C. Chen and Y.M. Tang, Mathematical treatment of phase transformation and analytical calculation of restraint stress-strain, JWRI, vol. 14, no. 1, pp. 153-162, 1985.
89. P. Tekriwal. And J. Mazumder, Transient and residual thermal strain-stress analysis of GMAW, ASMEJ. Engineering Materials and Technology, vol. 113, pp. 336-343, 1991.
90. J.H. Argyris, J. Szimmat, and K.J. Willam, Computational aspects of welding stress analysis, Computer Methods in Applied Mechanics and Engineering, vol. 33, pp. 635-666, 1982.
91. E. Friedman, Numerical simulation of the gas tungsten-arc welding process, ASME winter annual meeting, p. 35, 1977.
92. J.H. Cowles, M. Blanford, A.F. Giamei and M.J. Bruskotter, Application of three dimensional finite element analysis to electron beam welding of a high pressure drum rotor, Proc. of the 7th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 347, 1995.
93. L. Troive, M. Nasstrom and M. Jonsson, Experimental and numerical study of multi-pass welding process of pipe-flange joints, ASME J. Pressure Vessel Technology, Vol. 120, August, 1998, pp.244-251.
94. I.C. Sheng and Y. Chen, Modeling welding by surface heating, ASME J. Engineering Materials and Technology, vol. 114, no. 4, pp. 439-449, 1992.
95. Y. Chen and I.C. Sheng, On the solid-fluid transition zone in welding analysis, ASME HTD-Vol. 175/MD-Vol. 25.#Heat and Mass Transfer in Solidification Processing, p. 21, 1991.
96. Y. Chen and I.C. Sheng, Residual stress in weldment, J. of Thermal Stresses, vol. 15, no. 1, pp. 53-69, 1992.
97. W.W. Wilkening and J.L. Snow, Analysis of welding-induced residual stresses with the ADINA system, Computers Structures, vol. 47, no 4/5, pp. 767-786, 1993.
98. J.K. Hong, C.L. Tsai and P. Dong, Assessment of numerical procedures for residual stress analysis of multipass welds, Welding Journal, vol. 77, no. 9, pp.372s-382s, 1998.
99. M.F. Ashby, Physical modelling of materials problems, Materials Science and Technology, vol. 8, pp. 102-111, 1992.
100. D. Bru, J. Devaux, J.M. Bergheau and D. Pont, Influence of material properties at high temperatures on the modelling of welding residual stress and deformation state, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 457, 1997.
101. N.C. Sekhar, S.M. Roberts, J.M. Robinson and R.C. Reed, Characterisation of distortion during the laser welding of waspalloy: modelling and in-situ process monitoring, Proc. of the 5th Int. Conf. on Trends in Welding Research, p. 976, 1998.
102. M. Kojic and K-J. Bathe, The "effective-stress-function" algorithm for thermo-elasto-plasticity and creep, Int. J. Numerical Methods in Engineering, vol. 24, pp. 1509-1532, 1987.
103. B.L. Josefson and L-E. Lindgren, Modelling of residual stresses, Proc. of 5th Int. Conf. on Residual Stresses (ICRS-5), p. 1, 1997.
104. L. Tall, Residual Stresses in Welded Plates - a theoretical study, Welding Journal, vol. 43, no. 1, pp. 10s-23s, 1964.
105. I. Tsuji, Transient and residual stresses due tobutt-welding of mild steel plates, Memoirs of the Faculty of Engineering, Kyushu University, vol. 27, no. 3, 1967.
106. M. Jonsson, L. Karlsson and L-E. Lindgren, Deformations and stresses in butt-welding of large plates with special reference to the mechanical material properties, ASME J. Engineering Materials and Technology, vol. 107, no. 10, pp. 265-270, 1985.
107. D.J. Bammann and A.R. Ortega, The influence of the Bauschinger effect and yield definition on the modeling of welding processes, Proc. of the 6th Int. Conf. on Modeling of Casting, Welding and Advance Solidification Processes, The Minerals, Metals Materials Society, p. 543, 1993.
108. M.B. Hsu, Analysis of welds by the finite element method, ASME winter annual meeting 1977 Numerical Modeling of Manufacturing Processes, p. 97, 1977.
109. C.T. Karlsson, Finite element analysis of temperatures and stresses in a single-pass butt-welded pipe -influence of mesh density and material modelling, Eng. Comput., vol. 6, June, pp. 133-142, 1989.
110. P. Tekriwal, and J. Mazumder, Thermomechanical analysis of residual strains and stress in a GMA weld, Proc. of the 2nd Int. Conf. on Trends in Welding Research, pp. 91, 1989.
111. P. Tekriwal, and J. Mazumder, Transient and residual thermal strain-stress analysis of arc welding processes, Proc. of the 5th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 211, 1991.
112. A.P. Chakravarti, L.M. Mali and J.A. Goldak, Prediction of distortion and residual stresses in panel welds, Computer Modelling of Fabrication Processes and Constitutive Behaviour of Metals, p. 547, 1986.
113. A.P. Chakravarti, L.M. Malik, A.S. Rao, and J.A. Goldak, Prediction of distortion in overlayed repair welds, Proc of 5th Int Conf on Numerical Methods in Thermal Problems, p. 1131, 1987.
114. Y.V.L.N. Murthy, G. Venkata Rao and P. Krishna Iyer, Analysis of residual stresses in hemispherical head to cylindrical shell joints of steam generator by weld cycle simulation, J of Materials Processing Technology, vol. 44, no. 3-4, pp. 273-280, 1994.
115. Argyris, J.H., Szimmat, J., Willam, K.J., Finite element analysis of arc-welding processes, in R.W. Lewis (ed.), Numerical Methods in Heat Transfer, vol. 3, pp. 35-58, 1985.
116. S.E. Chidiac and F.A. Mirza, Thermal stress analysis due to welding processes by the finite element method, Computers Structures, vol. 46, no. 3, pp. 407-412, 1993.
117. J. Goldak, J. Zhou, V. Breiguine and F. Montoya, Thermal stress analysis of welds: From melting point to room temperature, JWRI, vol. 25, no. 2, pp. 185-189, 1996.
118. J. Goldak, V. Breiguine, N. Dai, E. Hughes and J. Zhou, Thermal stress analysis in solids near the liquid region in welds, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 543, 1997.
119. C. Carmignani, R. Mares and G. Toselli, Transient finite element analysis of deep penetration laser welding process in a single pass butt-welded thick steel plate, Computer Methods in Applied Mechanics and Engineering, vol. 179, pp. 197-214, 1999.
120. W.S. Winters and K.M. Mahin, PASTA2D Modeling of an axisymmetric stationary Gas Tungsten Arc weld, Proc. of the 5th Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 97, 1991.
121. A.R. Ortega, L.A. Bertram, E.A. Fuchs, K.W. Mahin andD.V. Nelson, Thermomechanical modeling of a stationary gas metal arc weld: a comparison between numerical and experimental results, Proc. of the 4th Int. Conf. on Trends in Welding Research, p. 89, 1992.
122. A.R. Ortega, J.J. Dike, J.F. Lathrop, C.H. Cadden, D.R. Folk and J.E. Robles, Analysis and validation of multi-pass girth welds in pipes, Proc. of the 8th Int. Conf. Modeling of Casting, Welding and Advanced Solidification Processes, p. 779, 1998.
123. J. Dike, C. Cadden, R. Corderman, C. Schultz and M. McAninch, Finite element modeling of multipass GMA welds in steel plates, Proc. of the 4th Int. Conf. on Trends in Welding Research, p. 57, 1995.
124. A.S. Oddy and J.M.J. McDill, Burnthroughprediction in pipeline welding, Int. J. Fracture, vol. 97, no. 1/4, pp. 249-261, 1999.
125. H. Suzuki, S. Hashizume, Y. Yabuki, Y. Ichihara, S. Nakajima andK. Kenmochi, Studies on the flow stress of metals and alloys, Report of the Institute of Industrial Science, The University of Tokyo, vol. 18, no. 3, 1968.
126. T. Nitschke-Pagel and H. Wohlfahrt, Residual Stress Distributions after Welding as a Consequence of the Combined Effect of Physical, Metallurgical and Mechanical Sources in: L. Karlsson, M. Jonson and L-E. Lindgren (eds.), Proc of IUTAM Symposium Mechanical Effects of Welding, Springer Verlag, Berlin, p. 123, 1992.
127. N. Cavallon, L. Taleb, J.F. Jullien, F. Waeckel, Y. Wadier and L. Moche, Thermomechanical behaviour of a carbon manganese steel under martensitic transformation, Modelling of residual stresses, Proc. of the 5th Int. Conf. on Residual Stresses (ICRS-5), p. 239, 1997.
128. F.D. Fischer, Q-P. Sun andK. Tanaka, Transformation-induced plasticity (TRIP), Appl. Mech. Rev., vol. 49, no. 6, pp. 317-362, 1996.
129. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud and T. Antretter, A new view on transformation induced plasticity (TRIP), Int. J. Plasticity, vol. 16, pp. 723-748, 2000.
130. B.L. Josefson, Effects of transformation plasticity on welding residual-stress fields in thin-walled pipes and thin plates, Materials Science and Technology, Oct., pp. 904-908, 1985.
131. S. Denis, E. Gautier, A. Simon and G. Beck, Stress Phase Transformation Interactions: Basic Principles; Modelization and Their Role in the Calculation of Internal Stresses, International Symposium on the Calculation of Internal Stresses in Heat Treatment of Metallic Materials, vol. 1, p. 157, 1984.
132. J.B. Leblond, J. Devaux and J.C. Devaux, Mathematical Modelling of Transformation Plasticity in Steels I: Case of Ideal-Plastic Phases, Int. J. Plasticity, vol. 5, pp. 551-572, 1989.
133. J.B. Leblond, Mathematical Modelling of Transformation Plasticity in Steels II: Coupling with Strain Hardening Phenomena, Int. J. Plasticity, vol. 5, pp. 573-591, 1989.
134. A.S. Oddy, J.A. Goldak and R.C. Reed, Martensite Formation, Transformation Plasticity and Stresses in High Strength Steel Welds, Proc. of the 3rd Int. Conf. on Trends in Welding Research,1992.
135. A. Oddy, J. Goldak and M. McDill, Transformation plasticity and residual stresses in single-pass repair welds, ASME J Press. Vessel Technol., vol. 11, pp. 33-38, 1992.
136. D.J. Bammann, V.C. Prantil and J.F. Lathrop, A model of phase transformation plasticity, Proc. of the 7th Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 275, 1995.
137. M. Berveiller and F.D. Fischer (eds), Mechanics of Solids with Phase Changes, CISM Courses and Lectures No. 368, Springer, 1997.
138. S. Denis, Considering stress-phase transformation interactions in the calculation of heat treatment residual stresses, in M. Berveiller and F.D. Fischer (eds), Mechanics of Solids with Phase Changes, CISM Courses and Lectures No. 368, Springer, p. 293, 1997.
139. E. Sarrazin, K. Dang Van and H. Maitournam, Modelling residual stresses in weldments of work-hardened aluminium alloys with microstructural effects, in H. Cerjak (ed.), Mathematical Modelling of Weld Phenomena 3, The Institute of Materials, p. 652, 1997.
140. B. Brickstad and B.L. Josefson, A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes, Int. J. Press. Vessel Piping, vol. 75, p. 11-25, 1998.
141. F.W. Brust, P. Dong, and J. Zhang, Influence of residual stresses and weld repairs on pipe fracture, Approximate Methods in the Design and Analysis of Pressure Vessels and Piping Component, PVP-vol. 347, p. 173, 1997.
142. P. Dong, J. Zhang and M.V. Li, Computational modeling of weld residual stresses and distortions - an integrated framework and industrial applications, ASME, PVP-Vol. 373 Fatigue, Fracture, and Residual Stresses, p. 137, 1998.
143. J.K. Hong, P. Dong and C.L. Tsai, Application of plastic strain relaxation effect in numerical welding simulation, Proc. of the 5th Int. Conf. on Trends in Welding Research, p. 999, 1998.
144. K.W. Mahin, W. Winters, J. Krafcik, T. Holden, R. Hosbon and S. MacEwen, Residual strain distributions in gas tungsten arc welds: a comparison between experimental results and weld model predictions, Proc. of the 2nd Int. Conf. on Trends in Welding Research, p. 83, 1989.
145. A. S. Oddy, and L.-E. Lindgren, Mechanical modeling and residual stresses, in L. Karlsson (ed.), Modeling in Welding, Hot Powder Forming and Casting, pp. 31-55, 1997.
146. Y. Ueda and K. Nakacho, Simplifying methods for analysis of transient and residual stresses and deformations due to multipass welding, JWRI, vol. 11, no. 1, pp. 95-103, 1982.
147. Y. Ueda, Y.C. Kim, K. Garataniand, T. Yamakita, Mechanical characteristics of repair welds in thick plate - distribution of three dimensional welding residual stresses and plastic strains and their production mechanisms, Welding International, vol. 2, no. 1, pp. 33-39, 1988.
148. E.F. Rybicki and R.B. Stonesifer, An analysis for predicting weld repair residual stresses in thick-walled vessels, ASME J. Pressure Vessel Technology, vol. 192, August, pp. 323-331, 1980.
149. E.F. Rybicki, J.R. Shadley, A.S. Sandhu and R.B. Stonesifer, Experimental and computational residual stress evaluation of a weld clad plate and machined test specimen, ASME J. Engineering Materials and Technology, vol. 110, October, pp. 297-304, 1988.
150. K-Y. Bae, S-J. Na and D-H. Park, A study of mechanical stress relief (MSR) treatment of residual stresses for one-pass submerged arc welding of V-grooved mild steel plate, Proc. Instn Mech Engrs/Part B: Journal of Eng. Manufacture, vol. 208, B:3, p. 217, 1994.
151. D.W. Lobitz, J.D. McClure and R.E. Nickell, Residual stresses and distortions in multi-pass welding, Proc. of ASME Winter annualmeeting, Numerical modeling ofmanufacturing processes, PVP-PB-025, p. 1, 1977.
152. N-X. Ma, Y. Ueda, H. Murakawa and H. Maeda, FEM analysis of 3-D welding residual stresses and angular distortion in T-type fillet welds, JWRI, vol. 24, no. 2, pp. 115-122, 1995.
153. L. Wikander, L. Karlsson, L-E. Lindgren and A.S. Oddy, Plane thermo-mechanical finite element modeling of welding with special reference to the material behaviour, Int Conf on Modeling and Control of Joining Processes,1993.
154. L. Wikander, L. Karlsson, M. Nasstrom and P. Webster, Finite element simulation and measurements of welding residual stresses, Modelling, Simul. Mater. Sci. Eng, vol. 2, pp. 845-864, 1994.
155. M.G. Yuan, J. Wang, H. Murakawa and Y. Ueda, Three dimensional finite element analysis of residual distortions in welded structures, Proc. of the 7th Conf. Modeling of Casting, Welding and Advanced Solidification Processes, The Minerals, Metals Materials Society, p. 257, 1995.
156. P. Michaleris, D.A. Tortorelli and C.A. Vidal, Analysis and optimization of weakly coupled thermoelastoplastic systems with application to weldment design, Int. J. Numerical Methods in Eng., vol. 38, pp. 1259-1285, 1995.
157. N. Siva Prasad and T.K. Sankaranarayanan, Estimation of residual stresses in weldments using adaptive grids, Computers Structures, vol. 60, no. 6, pp. 1037-1045, 1996.
158. B. Taljat, B. Radhakrishnan and T. Zacharia, Numerical analysis of GTA welding process with emphasis on post-solidification transformation effects on residual stresses, Materials Science and Engineering, vol. A246, pp. 45-54, 1998.
159. Y.C. Kim, K.H. Chang and K. Horikawa, Characteristics of out-of-plane deformation and residual stress generated by fillet welding, JWRI, vol. 27, no. 1, pp. 69-74, 1998.
160. E.F. Rybicki and R.B. Stonesifer, Computation of Residual Stresses due to Multipass Welds in Piping Systems, ASME J. Pressure Vessel Technology, vol. 101, pp. 149-154, 1979.
161. E.F. Rybicki, R.B. Stonesifer and W. Shack, The effect of length on weld overlay residual stresses, ASME Pressure Vessel and Piping and Computer Eng. Conference, p. 1, 1986.
162. Y. Lejeail, Simulation of a stainless steel multipass weldment, Proc. of the 5th Int. Conf. on Residual Stresses (ICRS-5), p. 484, 1997.
163. M. Nasstrom, P.J. Webster and J. Wang, Residual stresses and deformations due to longitudinal welding of pipes, Proc. of the 3rd Int. Conf. on Trends in Welding Research, p. 109, 1989.
164. M. Nasstrom, L. Wikander, L. Karlsson, L-E. Lindgren and J. Goldak, Combined 3D and shell modelling of welding, IUTAM Symposium on the Mechanical Effects of Welding, p. 197, 1992.
165. P. Dong, J.K. Hong, J. Zhang, P. Rogers, J. Bynum and S. Shah, Effects of repair weld residual stresses on wide-panel specimens loaded in tension, ASMEJ. Pressure Vessel Technology, vol. 120, May, pp. 122-128, 1998.
166. P. Dong, J.K. Hong and P. Rogers, Analysis of residual stresses in Al-Li repair welds and mitigation techniques, Welding Journal, Nov., pp. 439s-445s, 1998.
167. Y. Yang, P. Dong, X. Tian and Z. Zhang, Prevention of welding hot cracking of high strength aluminium alloys by mechanical rolling, Proc. of the 5th Int. Conf. on Trends in Welding Research, p. 700, 1998.
168. Y. Yang, P. Dong, J. Zhang and X. Tian, X., A hot-cracking mitigating technique for welding high strength aluminum alloy, Welding Journal, vol. 79, no 1, pp. 9s-17s, 2000.
169. P. Michaleris, Z. Feng, and G. Campbell, Evaluation of 2D and 3D FEA models for predicting residual stresses and distortion, Proc. of ASME Pressure Vessels and Piping Conf., Approximate Methods in the Design and Analysis of Pressure Vessels and Piping Components, PVP-Vol. 347, p. 91, 1997.