Boron in tribology: From borates to ionic liquids

Tribology Letters

Volumn 51, Issue 3, 2013, Pages 281-301

  Shah, Faiz Ullah ^a   Glavatskih, Sergei ^b,c   Antzutkin, Oleg N ^a,d  

^a LULEÅ UNIVERSITY OF TECHNOLOGY   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^c GHENT UNIVERSITY   (Belgium)

^d UNIVERSITY OF WARWICK   (United Kingdom)

Author keywords

Additives to lubricants; Boron compounds; Friction and wear; Greases; Ionic liquids; Lubricants

Indexed keywords

ANTIWEAR ADDITIVE; BIOMEDICAL APPLICATIONS; ENVIRONMENTALLY FRIENDLY LUBRICANTS; FRICTION AND WEAR; HEXAGONAL BORON NITRIDE; LUBRICANT ADDITIVES; MULTIFUNCTIONALITY; TRIBOLOGICAL APPLICATIONS;

BORON COMPOUNDS; COATINGS; INORGANIC COMPOUNDS; IONIC LIQUIDS; LUBRICANTS; LUBRICATING GREASES; MEDICAL APPLICATIONS; SOLID LUBRICANTS;

TRIBOLOGY;

EID: 84882245630     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-013-0181-3     Document Type: Review

References (205)

1. Spikes, H.: The history and mechanisms of ZDDP. Tribol. Lett. 17, 469-489 (2004)
2. Simmons, G.F.; Glavatskih, S.; Mueller, M.; Byheden, Å.; Prakash, B.: Extending performance limits of turbine oils. Tribol. Int. Submitted (2013)
3. Spikes, H.: Low- and zero-sulphated ash, phosphorus and sulphur anti-wear additives for engine oils. Lubr. Sci. 20, 103-136 (2008)
4. McFadden, C.; Soto, C.; Spencer, N.D.: Adsorption and surface chemistry in tribology. Tribol. Int. 30, 881-888 (1997)
5. Choudhary, R.B.; Pande, P.P.: Lubrication potential of boron compounds: an overview. Lubr. Sci. 14, 211-222 (2002)
6. Somers, A.E.; Biddulph, S.M.; Howlett, P.C.; Sun, J.; MacFarlane, D.R.; Forsyth, M.: A comparison of phosphorus and fluorine containing IL lubricants for steel on aluminium. Phys. Chem. Chem. Phys. 14, 8224-8231 (2012)
7. Chen, Y.; Ye, C.; Wang, H.; Liu, W.: Tribological performance of an ionic liquid as a lubricant for steel/aluminum contacts. J. Synth. Lubr. 20, 217-226 (2003)
8. Liu, W.; Ye, C.; Gong, Q.; Wang, H.; Wang, P.: Tribological performance of room-temperature ionic liquids as lubricant. Tribol. Lett. 13, 81-85 (2002)
9. Sanes, J.; Carrión, F.J.; Jiménez, A.E.; Bermúdez, M.D.: Influence of temperature on PA 6-steel contacts in the presence of an ionic liquid lubricant. Wear 263, 658-662 (2007)
10. Sanes, J.; Carrión, F.J.; Bermúdez, M.D.; Martínez-Nicolás, G.: Ionic liquids as lubricants of polystyrene and polyamide 6-steel contacts. Preparation and properties of new polymer-ionic liquid dispersions. Tribol. Lett. 21, 121-133 (2006)
11. Herdan, J.M.: Friction modifiers in engine and gear oils. Lubr. Sci. 12, 265-276 (2000)
12. Tse, J.: Boron charged under pressure. Nature 457, 800-801 (2009)
13. Oganov, A.; Chen, J.; Gatti, C.; Ma, Y.: Ionic high-pressure form of elemental boron. Nature 460, 292 (2009)
14. Chung, H.; Weinberger, M.B.; Levine, J.B.; Kavner, A.; Yang, J.M.; Tolbert, S.H.; Kaner, R.B.: Synthesis of ultra-incompressible superhard rhenium diboride at ambient pressure. Science 316, 436-439 (2007)
15. Martini, C.; Palombarini, G.; Carbucicchio, M.: Mechanism of thermochemical growth of iron borides on iron. J. Mater. Sci. 39, 933-937 (2004)
16. Oganov, A.R.; Solozhenko, V.L.: Boron: a hunt for superhard polymorphs. J. Superhard Mater. 31, 285-291 (2009)
17. Entwistle, C.; Marder, T.: Applications of three-coordinate organoboron compounds and polymers in optoelectronics. Chem. Mater. 16, 4574-4585 (2004)
18. Piers, W.E.; Bourke, S.C.; Conroy, K.D.: Borinium, borenium, and boronium ions: synthesis, reactivity, and applications. Angew. Chem. Int. Ed. 44, 5016-5036 (2005)
19. Kölle, P.; Nöth, H.: The chemistry of borinium and borenium ions. Chem. Rev. 85, 399-418 (1985)
20. Braunschweig, H.; Colling, M.: Transition metal complexes of boron - synthesis, structure and reactivity. Coord. Chem. Rev. 223, 1-51 (2001)
21. Levine, J.; Tolbert, S.; Kaner, R.: Advancements in the search for superhard ultra-incompressible metal borides. Adv. Funct. Mater. 19, 3519-3533 (2009)
22. Petasis, N.A.: Expanding roles for organoboron compounds: versatile and valuable molecules for synthetic, biological and medicinal chemistry. Aust. J. Chem. 60, 795-798 (2007)
23. Donnet, C.; Erdemir, A.: Solid lubricant coatings: recent developments and future trends. Tribol. Lett. 17, 389-397 (2004)
24. Erdemir, A.: Boron-based solid nanolubricants and lubrication additives. Nanolubricants, 203-223 (2008)
25. Rowe, G.W.: Some observations on the frictional behaviour of boron nitride and of graphite. Wear 3, 274-285 (1960)
26. Mosuang, T.E.; Lowther, J.E.: Relative stability of cubic and different hexagonal forms of boron nitride. J. Phys. Chem. Solids 63, 363-368 (2002)
27. Engler, M.; Lesniak, C.; Damasch, R.; Ruisinger, B.; Eichler, J.: Hexagonal boron nitride (hBN) - applications from metallurgy to cosmetics. CFI Ceramic Forum Int. 84, E49-E53 (2007)
28. Koskilinna, J.; Linnolahti, M.; Pakkanen, T.: Friction coefficient for hexagonal boron nitride surfaces from ab initio calculations. Tribol. Lett. 24, 37-41 (2006)
29. Martin, J.M.; Le Mogne, T.; Chassagnette, C.; Gardos, M.N.: Friction of hexagonal boron nitride in various environments. Tribol. Trans. 35, 462-472 (1992)
30. Watanabe, S.; Miyake, S.; Murakawa, M.: Tribological properties of cubic, amorphous and hexagonal boron nitride films. Surf. Coat. Technol. 49, 406-410 (1991)
31. Jiang, X.; Philip, J.; Zhang, W.J.; Hess, P.; Matsumoto, S.: Hardness and Young's modulus of high-quality cubic boron nitride films grown by chemical vapor deposition. J. Appl. Phys. 93, 1515-1519 (2003)
32. Tokoro, H.; Fujii, S.; Oku, T.: Iron fine particles coated with boron nitride nanolayers synthesized by a solid phase reaction. Diamond Relat. Mater. 13, 1139-1143 (2004)
33. Shrestha, N.K.; Sakurada, K.; Masuko, M.; Saji, T.: Composite coatings of nickel and ceramic particles prepared in two steps. Surf. Coat. Technol. 140, 175-181 (2001)
34. Rebholz, C.; Ziegele, H.; Leyland, A.; Matthews, A.: Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N multiphase thin films produced by electron-beam evaporation. J. Vac. Sci. Techol. A. Vac. Surf. Films 16, 2851-2857 (1998)
35. Wong, S.F.; Ong, C.W.; Pang, G.K.H.; Li, Q.; Lau, W.M.: Removal of sp2-boron nitride transition layer in the growth of cubic boron nitride films. Diamond Relat. Mater. 13, 1632-1637 (2004)
36. Freudenstein, R.; Kulisch, W.: Improvement of the adhesion of c-BN films by bias-graded h-BN interlayers. Thin Solid Films 420-421, 132-138 (2002)
37. Wong, S.; Ong, C.; Pang, G.; Baba Kishi, K.; Lau, W.: Effects of the insertion of a thick Sp2 buffer layer on the adhesion of cBN-rich film. J. Vac. Sci. Techol. A. Vac. Surf. Films 22, 676-682 (2004)
38. Erdemir, A.; Eryilmaz, O.L.; Fenske, G.R.: Self-replenishing solid lubricant films on boron carbide. Surf. Eng. 15, 291-295 (1999)
39. Erdemir, A.; Fenske, G.R.; Erck, R.A.; Nichols, F.A.; Busch, D.E.: Tribological properties of boric acid and boric-acid-forming surfaces. Part II. Mechanisms of formation and self-lubrication of boric acid films on boron- and boric oxide-containing surfaces. Lubr. Eng. 47, 179-184 (1991)
40. Erdemir, A.: Tribological properties of boric acid and boric-acid-forming surfaces. Part I. Crystal chemistry and mechanism of self-lubrication of boric acid. Lubr. Eng. 47, 168-173 (1991)
41. Lovell, M.; Higgs, C.F.; Deshmukh, P.; Mobley, A.: Increasing formability in sheet metal stamping operations using environmentally friendly lubricants. J. Mater. Process. Technol. 177, 87-90 (2006)
42. Erdemir, A.; Fenske, G.R.; Erck, R.A.: Study of the formation and self-lubrication mechanisms of boric acid films on boric oxide coatings. Surf. Coat. Technol. 44, 588-596 (1990)
43. Sawyer, W.G.; Ziegert, J.C.; Schmitz, T.L.; Barton, T.: In-situ lubrication with boric acid: powder delivery of an environmentally benign solid lubricant. Tribol. Trans. 49, 284-290 (2006)
44. Peterson, M.; Murray, S.; Florek, J.: Consideration of lubricants for temperatures above 1000 F. ASLE Trans. 2, 225-234 (1959)
45. Deshmukh, P.; Lovell, M.; Sawyer, W.G.; Mobley, A.: On the friction and wear performance of boric acid lubricant combinations in extended duration operations. Wear 260, 1295-1304 (2006)
46. Lovell, M.R.; Kabir, M.A.; Menezes, P.L.; Higgs III, C.F.: Influence of boric acid additive size on green lubricant performance. Phil. Trans. Math. Phys. Eng. Sci. 368, 4851-4868 (2010)
47. Kabir, M.A.; Higgs III, C.F.; Lovell, M.R.: A pin-on-disk experimental study on a green particulate-fluid lubricant. J. Tribol. 130, 041801-041806 (2008)
48. Kartal, G.; Timur, S.; Urgen, U.; Erdemir, A.: Influence of process duration on structure and chemistry of borided low carbon steel. Surf. Coat. Technol. 205, 1578-1583 (2010)
49. Greco, A.; Mistry, K.; Sista, V.; Eryilmaz, O.; Erdemir, A.: Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications. Wear 271, 1754-1760 (2011)
50. Kartal, G.; Timur, S.; Urgen, U.; Erdemir, A.: Electrochemical boriding of titanium for improved mechanical properties. Surf. Coat. Technol. 204, 3935-3939 (2010)
51. Torun, O.: Boriding of nickel aluminide. Surf. Coat. Technol. 202, 3549-3554 (2008)
52. Bindal, C.; Erdemir, A.: Ultralow friction behavior of borided steel surfaces after flash annealing. Appl. Phys. Lett. 68, 923-925 (1996)
53. Erdemir, A.; Bindal, C.; Zuiker, C.; Savrun, E.: Tribology of naturally occurring boric acid films on boron carbide. Surf. Coat. Technol. 86-87, 507-510 (1996)
54. Erdemir, A.; Halter, M.; Fenske, G.R.: Preparation of ultralow-friction surface films on vanadium diboride. Wear 205, 236-239 (1997)
55. Köster, R.: Organoboron chemistry. In: Von Steinberg, H. (ed.) Band 1: Boron-oxygen and boron-sulfur compounds. Interscience publishers, Wiley, New-York, London, Sidney 1964. Angew. Chem. 77, 108-108 (1965)
56. Rosen R.: Hydrocarbon composition containing organic boron compounds. US patent, No. 2234581 (1941)
57. Kreuz, K.L.; Fein, R.S.; Dundy, M.: EP films from borate lubricants. ASLE Trans. 10, 67-76 (1967)
58. Baldwin, B.A.: Relative antiwear efficiency of boron and sulfur surface species. Wear 45, 345-353 (1977)
59. Liu, W.; Jin, Z.; Xue, Q.: The performance and antiwear mechanism of S-containing organic borate as an oil additive. Lubr. Sci. 7, 49-60 (1994)
60. Yao, J.: Antiwear function and mechanism of borate containing nitrogen. Tribol. Int. 30, 387-389 (1997)
61. Stanulov, K.G.; Harhara, H.N.; Cholakov, G.S.: An opportunity for partial replacement of phosphates and dithiophosphates in EP packages with boron-containing additives. Tribol. Int. 31, 257-263 (1998)
62. Philippon, D.; De Barros-Bouchet, M.; Lerasle, O.; Le Mogne, T.; Martin, J.-M.: Experimental simulation of tribochemical reactions between borates esters and steel surface. Tribol. Lett. 41, 73-82 (2011)
63. Zheng, Z.; Shen, G.; Wan, Y.; Cao, L.; Xu, X.; Yue, Q.; Sun, T.: Synthesis, hydrolytic stability and tribological properties of novel borate esters containing nitrogen as lubricant additives. Wear 222, 135-144 (1998)
64. Wang, J.; Wang, J.; Li, C.; Zhao, G.; Wang, X.: A high-performance multifunctional lubricant additive for water-glycol hydraulic fluid. Tribol. Lett. 43, 235-245 (2011)
65. Miller, B.P.; Fulong, J.O.; Tysoe, W.T.: Surface chemistry of isopropoxy tetramethyl dioxaborolane on Cu(111). Langmuir 28, 6322-6327 (2012)
66. Miller, B.P.; Kotvis, P.V.; Furlong, O.J.; Tysoe, W.T.: Relating molecular structure to tribological chemistry: borate esters on copper. Tribol. Lett. 49, 1-9 (2012)
67. Wang, Y.; Li, J.; He, Z.; Ren, T.: Investigation on phenyl-borated hydroxyalkyldithio-carbamate as multi-functional lubricating additive with high hydrolytic stability and anti-oxidation. Proc. Inst. Mech. Eng. Part J 222, 133-140 (2008)
68. Sharma, B.; Doll, K.; Heise, G.; Myslinska, M.; Erhan, S.: Antiwear additive derived from soybean oil and boron utilized in a gear oil formulation. Ind. Eng. Chem. Res. 51, 11941-11945 (2012)
69. Li, W.; Wu, Y.; Wang, X.; Liu, W.: Tribological study of boron-containing soybean lecithin as environmentally friendly lubricant additive in synthetic base fluids. Tribol. Lett. 12, 1-8 (2012)
70. Chen, P.; Jäkle, F.: Highly luminescent, electron-deficient bora-cyclophanes. J. Am. Chem. Soc. 133, 20142-20145 (2011)
71. Xu, W.: Anion-trapping and polyanion electrolytes based on acid-in-chain borate polymers. Electrochim. Acta 48, 2255-2266 (2003)
72. Geiger, W.E.: Organometallic electrochemistry based on electrolytes containing weakly-coordinating fluoroarylborate anions. Acc. Chem. Res. 43, 1030-1039 (2010)
73. Wornyoh, E.Y.A.: A review of dry particulate lubrication: powder and granular materials. J. Tribol. 129, 438-449 (2007)
74. Adams, J.H.: Borate - a new generation EP gear lubricant. Lubr. Eng. 33, 241-246 (1977)
75. Kim, J.H.; Mistry, K.K.; Matsumoto, N.; Sista, V.; Eryilmaz, O.L.; Erdemir, A.: Effect of surfactant on tribological performance and tribochemistry of boric acid based colloidal lubricants. Tribol. Mater. Surf. Interf. 6, 134-141 (2012)
76. Kimura, Y.; Wakabayashi, T.; Okada, K.; Wada, T.; Nishikawa, H.: Boron nitride as a lubricant additive. Wear 232, 199-206 (1999)
77. Liu, W.; Zhang, C.; Zhang, X.; Xue, Q.; Wang, H.: Antiwear properties of potassium borate as an oil additive. Lubr. Eng. 47, 344-347 (1991)
78. Hu, Z.S.; Dong, J.X.: Study on antiwear and reducing friction additive of nanometer titanium borate. Wear 216, 87-91 (1998)
79. Dong, J.X.; Hu, Z.S.: A study of the anti-wear and friction-reducing properties of the lubricant additive, nanometer zinc borate. Tribol. Int. 31, 219-223 (1998)
80. Tian, Y.; Guo, Y.; Jiang, M.; Sheng, Y.; Hari, B.: Synthesis of hydrophobic zinc borate nanodiscs for lubrication. Mater. Lett. 60, 2511-2515 (2006)
81. Hu, Z.S.; Shi, Y.G.; Wang, L.G.; Peng, Y.; Chen, G.X.; Dong, J.X.: Study on antiwear and reducing friction additive of nanometer aluminum borate. Lubr. Eng. 57, 23-27 (2001)
82. Chen, G.X.; Hu, Z.S.; Nai, R.; Wang, L.G.; Peng, Y.; Dong, J.X.: Preparation and tribology of ultrafine and amorphous strontium borate. Proc. Inst. Mech. Eng. Pt. L. J. Mater. 215, 133-140 (2001)
83. Hu, Z.S.; Lai, R.; Lou, F.; Wang, L.G.; Chen, Z.L.; Chen, G.X.; Dong, J.X.: Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive. Wear 252, 370-374 (2002)
84. 5) nanowires, growth mechanism and their lubricating properties. Mater. Res. Bull. 43, 2239-2247 (2008)
85. Hu, Z.S.; Dong, J.X.; Chen, G.X.; He, J.Z.: Preparation and tribological properties of nanoparticle lanthanum borate. Wear 243, 43-47 (2000)
86. Kong, L.; Hu, H.; Wang, T.; Huang, D.; Fu, J.: Synthesis and surface modification of the nanoscale cerium borate as lubricant additive. J. Rare Earths 29, 1095-1099 (2011)
87. Normand, V.; Martin, J.M.; Ponsonnet, L.; Inoue, K.: Micellar calcium borate as an antiwear additive. Tribol. Lett. 5, 235-242 (1998)
88. Martin, J.M.; Grossiord, C.; Varlot, K.; Vacher, B.; Igarashi, J.: Synergistic effects in binary systems of lubricant additives: a chemical hardness approach. Tribol. Lett. 8, 193-201 (2000)
89. Grossiord, C.; Martin, J.M.; Varlot, K.; Vacher, B.; Le Mogne, T.; Yamada, Y.: Tribochemical interactions between Zndtp, Modtc and calcium borate. Tribol. Lett. 8, 203-212 (2000)
90. Masenelli-Varlot, K.; Kasrai, M.; Bancroft, G.; De Stasio, G.; Gilbert, B.: Spatial distribution of the chemical species generated under rubbing from ZDDP and dispersed potassium triborate. Tribol. Lett. 14, 157-166 (2003)
91. Bakunin, V.N.; Suslov, A.Y.; Kuzmina, G.N.; Parenago, O.P.: Recent achievements in the synthesis and application of inorganic nanoparticles as lubricant components. Lubr. Sci. 17, 127-145 (2005)
92. Liu, N.; Tian, Y.; Yu, L.; Li, Q.; Meng, F.; Zheng, Y.; Zhang, G.; Liu, Z.; Li, J.; Jiang, F.: Synthesis and surface modification of uniform barium borate nanorods for lubrication. J. Alloys Comp. 466, L11-L14 (2008)
93. Jia, Z.; Xia, Y.: Hydrothermal synthesis, characterization, and tribological behavior of oleic acid-capped lanthanum borate with different morphologies. Tribol. Lett. 41, 425-434 (2011)
94. Singh, T.; Singh, R.; Verma, V.K.; Nakayama, K.: A study of N, O and S heterocyclic compounds as extreme pressure lubricant additives. Tribol. Int. 23, 41-46 (1990)
95. Zhang, J.; Yang, S.; Liu, W.; Xue, Q.: A study of 2-(n-alkyldithio)- benzoxazoles as novel additives. Tribol. Lett. 7, 173-177 (1999)
96. Zhang, J.; Liu, W.; Xue, Q.: A study of 2-(dibutylaminomethyl)- thiobenzimidazole as an oil additive. Wear 231, 279-284 (1999)
97. Xue, Q.; Zhang, J.; Liu, W.; Yang, S.: The friction and wear behavior of 2-(n-alkyldithio)-benzimidazole as additives in liquid paraffin. Tribol. Lett. 7, 27-30 (1999)
98. Liang, P.; Wu, H.; Zuo, G.; Ren, T.: Tribological performances of heterocyclic-containing ether and/or thioether as additives in the synthetic diester. Lubr. Sci. 21, 111-121 (2009)
99. Babić-Samardžija, K.; Lupu, C.; Hackerman, N.; Barron, A.R.; Luttge, A.: Inhibitive properties and surface morphology of a group of heterocyclic diazoles as inhibitors for acidic iron corrosion. Langmuir 21, 12187-12196 (2005)
100. Huang, W.; Dong, J.; Wu, G.; Zhang, C.: A study of S-[2-(acetamido) benzothiazol-1-yl]N, N-dibutyl dithiocarbamate as an oil additive in liquid paraffin. Tribol. Int. 37, 71-76 (2004)
101. Huang, W.; Dong, J.; Li, F.; Chen, B.: Performance and antiwear mechanism of (2-sulfurone-benzothiazole)-3-methyl esters as additives in synthetic lubricant. Tribol. Int. 33, 553-557 (2000)
102. Waynick, J.A.: The development and use of metal deactivators in the petroleum industry: a review. Energ. Fuel. 15, 1325-1340 (2001)
103. Shen, G.; Zheng, Z.; Wan, Y.; Xu, X.; Cao, L.; Yue, Q.; Sun, T.; Liu, A.: Synergistic lubricating effects of borate ester with heterocyclic compound. Wear 246, 55-58 (2000)
104. Zhang, J.; Liu, W.; Xue, Q.: The tribological properties of the heterocyclic compound containing S, N, O, and B as additive in liquid paraffin. Wear 224, 68-72 (1999)
105. Gao, Y.; Jing, Y.; Zhang, Z.; Chen, G.; Xue, Q.: Tribological properties of aqueous solution of imidazoline borates. Wear 253, 576-578 (2002)
106. Li, J.; Xu, X.; Wang, Y.; Ren, T.: Tribological studies on a novel borate ester containing benzothiazol-2-yl and disulfide groups as multifunctional additive. Tribol. Int. 43, 1048-1053 (2010)
107. Jia, Z.; Wang, P.; Xia, Y.; Zhang, H.; Pang, X.; Li, B.: Tribological behaviors of diamond-like carbon coatings on plasma nitrided steel using three BN-containing lubricants. Appl. Surf. Sci. 255, 6666-6674 (2009)
108. Jia, Z.; Xia, Y.; Pang, X.; Hao, J.: Tribological behaviors of different diamond-like carbon coatings on nitrided mild steel lubricated with benzotriazole-containing borate esters. Tribol. Lett. 41, 247-256 (2011)
109. Verma, V.K.; Singh, R.; Srivastava, V.; Singh, P.K.: EP/AW performance evaluation of some zinc alkyl/dialkyl/alkylaryl-dithiocarbamates in four-ball tests. Lubr. Sci. 16, 195-203 (2004)
110. Chen, G.; Chen, L.; Dong, J.: Preparation and tribological behavior of oil soluble cerium dioctyl dithiocarbamate. Lubr. Eng. 53, 24-29 (1997)
111. Palacios, J.: Thickness and chemical composition of films formed by antimony dithiocarbamate and zinc dithiophosphate. Tribol. Int. 19, 35-39 (1986)
112. Yamamoto, Y.; Gondo, S.; Tanaka, N.: Effect of graphite on friction and wear characteristics of molybdenum dithiocarbamate. Tribol. Lett. 17, 55-59 (2004)
113. Shea, T.; Stipanovic, A.: Solution phase reactions of organomolybdenum friction modifier additives for energy conserving engine oils. Tribol. Lett. 12, 13-22 (2002)
114. 2 formation by MoDTC in presence of ZnDTP: effect of oxidative degradation. Wear 258, 1643-1650 (2005)
115. Liu, C.; Yue, W.; Wang, C.; Gao, X.; Sun, X.: The interactions between sulfur-nitrided layer on steel surface and MoDTC lubricating additive and their effects on tribological performance. Tribol. Lett. 47, 313-322 (2012)
116. Laine, E.; Olver, A.V.; Lekstrom, M.F.; Shollock, B.A.; Beveridge, T.A.: The effect of a friction modifier additive on micropitting. Tribol. Trans. 52, 526-533 (2009)
117. 2 single sheet lubrication by molybdenum dithiocarbamate. Tribol. Int. 31, 737-743 (1998)
118. 2 formation and selective transfer from MoDPT films. Surf. Coat. Technol. 108-109, 352-359 (1998)
119. Morina, A.; Neville, A.; Priest, M.; Green, J.H.: ZDDP and MoDTC interactions and their effect on tribological performance - Tribofilm characteristics and its evolution. Tribol. Lett. 24, 243-256 (2006)
120. Morina, A.; Neville, A.; Priest, M.; Green, J.H.: ZDDP and MoDTC interactions in boundary lubrication-The effect of temperature and ZDDP/MoDTC ratio. Tribol. Int. 39, 1545-1557 (2006)
121. Huang, W.; Tan, Y.; Dong, J.; Chen, B.: Tribological properties of the film formed by borated dioctyl dithiocarbamate as an additive in liquid paraffin. Tribol. Int. 35, 787-791 (2002)
122. Huang, W.; Hou, B.; Zheng, Z.; Xu, K.; Liang, Y.: Friction and wear behavior of AZ91D magnesium alloy against steel lubricated with N- and S-containing organic borates. Lubr. Sci. 18, 77-86 (2006)
123. Sun, Y.; Hu, L.; Xue, Q.: Tribological properties and action mechanism of N, N-dialkyl dithiocarbamate-derived S-hydroxyethyl borate esters as additives in rapeseed oil. Wear 266, 917-924 (2009)
124. Shah, F.U.; Glavatskih, S.; Antzutkin, O.N.: Novel alkylborate- dithiocarbamate lubricant additives: synthesis and tribophysical characterization. Tribol. Lett. 45, 67-78 (2012)
125. Shah, F. U.; Glavatskih, S.; Antzutkin, O. N.: Antiwear additives for lubricants. Swedish Patent. No.; 535894 (2013)
126. Komvopoulos, K.; Pernama, S.A.; Ma, J.; Yamaguchi, E.S.; Ryason, P.R.: Synergistic effects of boron-, sulfur-, and phosphorus-containing lubricants in boundary lubrication of steel surfaces. Tribol. Trans. 48, 218-229 (2005)
127. Komvopoulos, K.; Chiaro, V.; Pakter, B.; Yamaguchi, E.S.; Ryason, P.R.: Antiwear tribofilm formation on steel surfaces lubricated with gear oil containing borate, phosphorus, and sulfur additives. Tribol. Trans. 45, 568-575 (2002)
128. Kim, S.M.; Sit, C.Y.; Komvopoulos, K.; Yamaguchi, E.S.; Ryason, P.R.: Boundary lubrication of steel surfaces with borate, phosphorus, and sulfur containing lubricants at relatively low and elevated temperatures. Tribol. Trans. 43, 569-578 (2000)
129. Haiduc, I.; Yoong Goh, L.: Reactions of bis(thiophosphoryl)disulfanes and bis(thiophosphinyl)disulfanes with metal species: An alternative, convenient route to metal complex and organometallic dithiophosphates and dithiophosphinates. Coord. Chem. Rev. 224, 151-170 (2002)
130. Clegg, W.; Elsegood, M.; Lawlor, F.; Norman, N.; Pickett, N.: Structural studies of bis-catecholate, bis-dithiocatecholate, and tetraalkoxydiborane(4) compounds. Inorg. Chem. 37, 5289-5293 (1998)
131. Lawlor, F.; Norman, N.; Pickett, N.; Robins, E.; Nguyen, P.: Bis-catecholate, bis-dithiocatecholate, and tetraalkoxydiborane(4) compounds: aspects of synthesis and electronic structure. Inorg. Chem. 37, 5282-5288 (1998)
132. Cragg, R.H.; Husband, J.P.N.; Weston, A.F.: Boron-sulphur compounds - V[1]: reaction of lead thiolates with chloroboranes. J. Inorg. Nucl. Chem. 35, 3685-3689 (1973)
133. Ito, M.; Tokitoh, N.; Okazaki, R.: Synthesis and structures of novel dithiaboretanes containing a group 4, 14, or 15 element. Organometallics 16, 4314-4319 (1997)
134. Wang, Y.; Li, J.; Ren, T.: Tribological study of a novel borate ester containing S, P with high hydrolytic stability as a multifunctional lubricating additive. Tribol. Trans. 51, 160-165 (2008)
135. Wang, Y.; Li, J.; Ren, T.: Tribological study of a novel borate ester containing dialkylthiophosphate group as multifunctional additive. Ind. Lubr. Tribol. 61, 33-39 (2009)
136. Shah, F.U.; Glavatskih, S.; Antzutkin, O.N.: Synthesis, physicochemical, and tribological characterization of S-di-n-octoxyboron-O, O′-di-n- octyldithiophosphate. ACS Appl. Mater. Interfaces 1, 2835-2842 (2009)
137. Shah, F.U.; Glavatskih, S.; Höglund, E.; Lindberg, M.; Antzutkin, O.N.: Interfacial antiwear and physicochemical properties of alkylborate-dithiophosphates. ACS Appl. Mater. Interfaces 3, 956-968 (2011)
138. Viesca, J.L.; Battez, A.H.; González, R.; Reddyhoff, T.; Pérez, A.T.; Spikes, H.A.: Assessing boundary film formation of lubricant additivised with 1-hexyl-3-methylimidazolium tetrafluoroborate using ECR as qualitative indicator. Wear 269, 112-117 (2010)
139. Mu, Z.; Zhou, F.; Zhang, S.; Liang, Y.; Liu, W.: Effect of the functional groups in ionic liquid molecules on the friction and wear behavior of aluminum alloy in lubricated aluminum-on-steel contact. Tribol. Int. 38, 725-731 (2005)
140. Seddon, K.: Ionic liquids: designer solvents for green synthesis. Chem. Eng. 730, 33-35 (2002)
141. Welton, T.: Room-temperature ionic liquids. Solvents for synthesis and catalysis. Chem. Rev. 99, 2071-2083 (1999)
142. MacFarlane, D.R.; Pringle, J.M.; Howlett, P.C.; Forsyth, M.: Ionic liquids and reactions at the electrochemical interface. Phys. Chem. Chem. Phys. 12, 1659-1669 (2010)
143. Petkovic, M.; Seddon, K.; Pereira, C.: Ionic liquids: a pathway to environmental acceptability. Chem. Soc. Rev. 40, 1383-1403 (2011)
144. Ranke, J.; Stolte, S.; Stoermann, R.; Arning, J.; Jastorff, B.: Design of sustainable chemical products: the example of ionic liquids. Chem. Rev. 107, 2183-2206 (2007)
145. Walden, P.: Molecular weights and electrical conductivity of several fused salts. Bull. Acad. Impér. Sci. St. Petersbourg 8, 405 (1914)
146. Wilkes, J.S.; Levisky, J.A.; Wilson, R.A.; Hussey, C.L.: Dialkylimidazolium chloroaluminate melts: a new class of room-temperature ionic liquids for electrochemistry, spectroscopy, and synthesis. Inorg. Chem. 21, 1263-1264 (1982)
147. Fannin Jr, A.A.; Floreani, D.A.; King, L.A.; Landers, J.S.; Piersma, B.J.; Stech, D.J.; Vaughn, R.L.; Wilkes, J.S.; Williams, J.L.: Properties of 1,3-dialkylimidazolium chloride-aluminum chloride ionic liquids. 2. Phase transitions, densities, electrical conductivities, and viscosities. J. Phys. Chem. 88, 2614-2621 (1984)
148. Fannin Jr, A.A.; King, L.A.; Levisky, J.A.; Wilkes, J.S.: Properties of 1,3-dialkylimidazolium chloride-aluminum chloride ionic liquids. 1. Ion interactions by nuclear magnetic resonance spectroscopy. J. Phys. Chem. 88, 2609-2614 (1984)
149. Hallett, J.; Welton, T.: Room-temperature ionic liquids: solvents for synthesis and catalysis. Chem. Rev. 111, 3508-3576 (2011)
150. Plechkova, N.; Seddon, K.: Applications of ionic liquids in the chemical industry. Chem. Soc. Rev. 37, 123-150 (2008)
151. Bermudez, M.; Jimenez, A.; Sanes, J.; Carrion, F.: Ionic liquids as advanced lubricant fluids. Molecules 14, 2888-2908 (2009)
152. Palacio, M.; Bhushan, B.: A review of ionic liquids for green molecular lubrication in nanotechnology. Tribol. Lett. 40, 247-268 (2010)
153. Minami, I.: Ionic liquids in tribology. Molecules 14, 2286-2305 (2009)
154. Zhou, F.; Liang, Y.; Liu, W.: Ionic liquid lubricants: designed chemistry for engineering applications. Chem. Soc. Rev. 38, 2590-2599 (2009)
155. Somers, A.E.; Howlett, P.C.; MacFarlane, D.R.; Forsyth, M.: A review of ionic liquid lubricants. Lubricants 1, 3-21 (2013)
156. Ye, C.; Liu, W.; Chen, Y.; Yu, L.: Room-temperature ionic liquids: a novel versatile lubricant. Chem. Comm. 21, 2244-2245 (2001)
157. Liu, W.; Ye, C.; Gong, Q.; Wang, H.; Wang, P.: Tribological performance of room-temperature ionic liquids as lubricant. Tribol. Lett. 13, 81-85 (2002)
158. Lu, Q.; Wang, H.; Ye, C.; Liu, W.; Xue, Q.: Room temperature ionic liquid 1-ethyl-3-hexylimidazolium- bis(trifluoromethylsulfonyl)-imide as lubricant for steel-steel contact. Tribol. Int. 37, 547-552 (2004)
159. Mu, Z.; Liu, W.; Zhang, S.; Zhou, F.: Functional room-temperature ionic liquids as lubricants for an aluminum-on-steel system. Chem. Lett. 33, 524-525 (2004)
160. Wang, H.; Lu, Q.; Ye, C.; Liu, W.; Cui, Z.: Friction and wear behaviors of ionic liquid of alkylimidazolium hexafluorophosphates as lubricants for steel/steel contact. Wear 256, 44-48 (2004)
161. Zhang, Q.; Li, Z.; Zhang, J.; Zhang, S.; Zhu, L.; Yang, J.; Zhang, X.; Deng, Y.: Physicochemical properties of nitrile-functionalized ionic liquids. J. Phys. Chem. B 111, 2864-2872 (2007)
162. Arora, H.; Cann, P.M.: Lubricant film formation properties of alkyl imidazolium tetrafluoroborate and hexafluorophosphate ionic liquids. Tribol. Int. 43, 1908-1916 (2010)
163. Jiménez, A.E.; Bermúdez, M.D.: Ionic liquids as lubricants of titanium-steel contact. Part 2: friction, wear and surface interactions at high temperature. Tribol. Lett. 37, 431-443 (2010)
164. Liu, X.; Zhou, F.; Liang, Y.; Liu, W.: Tribological performance of phosphonium based ionic liquids for an aluminum-on-steel system and opinions on lubrication mechanism. Wear 261, 1174-1179 (2006)
165. Weng, L.J.; Liu, X.Q.; Liang, Y.M.; Xue, Q.J.: Effect of tetraalkylphosphonium based ionic liquids as lubricants on the tribological performance of a steel-on-steel system. Tribol. Lett. 26, 11-17 (2007)
166. Klaver, T.P.C.; Luppi, M.; Sluiter, M.H.F.; Kroon, M.C.; Thijsse, B.J.: DFT study of 1,3-dimethylimidazolium tetrafluoroborate on Al and Cu(111) surfaces. J. Phys. Chem. C 115, 14718-14730 (2011)
167. 4 molecule adsorption on Li surfaces as a model for ionic liquid/Li interfaces in Li-ion batteries. Phys. Rev. B 78, 205402 (2008)
168. Minami, I.; Inada, T.; Okada, Y.: Tribological properties of halogen-free ionic liquids. Proc. Inst. Mech. Eng. J. J. Eng. Tribol. 226, 891-902 (2012)
169. Shah, F.U.; Glavatskih, S.; MacFarlane, D.R.; Somers, A.; Forsyth, M.; Antzutkin, O.N.: Novel halogen-free chelated orthoborate-phosphonium ionic liquids: synthesis and tribophysical properties. Phys. Chem. Chem. Phys. 13, 12865-12873 (2011)
170. Phillips, B.S.; Zabinski, J.S.: Ionic liquid lubrication effects on ceramics in a water environment. Tribol. Lett. 17, 533-541 (2004)
171. Omotowa, B.A.; Phillips, B.S.; Zabinski, J.S.; Shreeve, J.M.: Phosphazene-based ionic liquids: synthesis, temperature-dependent viscosity, and effect as additives in water lubrication of silicon nitride ceramics. Inorg. Chem. 43, 5466-5471 (2004)
172. Chandrasekhar, V.; Nagendran, S.: Phosphazenes as scaffolds for the construction of multi-site coordination ligands. Chem. Soc. Rev. 30, 193-203 (2001)
173. Jiménez, A.E.; Bermúdez, M.D.; Carrión, F.J.; Martínez-Nicolás, G.: Room temperature ionic liquids as lubricant additives in steel-aluminium contacts: influence of sliding velocity, normal load and temperature. Wear 261, 347-359 (2006)
174. Battez, A.H.; González, R.; Viesca, J.L.; Blanco, D.; Asedegbega, E.; Osorio, A.: Tribological behaviour of two imidazolium ionic liquids as lubricant additives for steel/steel contacts. Wear 266, 1224-1228 (2009)
175. Cai, M.; Liang, Y.; Yao, M.; Xia, Y.; Zhou, F.; Liu, W.: Imidazolium ionic liquids as antiwear and antioxidant additive in poly(ethylene glycol) for steel/steel contacts. ACS Appl. Mater. Interf. 2, 870-876 (2010)
176. Yao, M.; Liang, Y.; Xia, Y.; Zhou, F.: Bisimidazolium ionic liquids as the high-performance antiwear additives in poly(ethylene glycol) for steel-steel contacts. ACS Appl. Mater. Interf. 1, 467-471 (2009)
177. Zhao, Q.: Tribological behavior of protic ionic liquids with dodecylamine salts of dialkyldithiocarbamate as additives in lithium complex grease. Tribol. Lett. 48, 133-144 (2012)
178. Fox, M.F.; Priest, M.: Tribological properties of ionic liquids as lubricants and additives. Part 1: synergistic tribofilm formation between ionic liquids and tricresyl phosphate. Proc. Inst. Mech. Eng. Part J 222, 291-303 (2008)
179. Cai, M.; Zhao, Z.; Liang, Y.; Zhou, F.; Liu, W.: Alkyl imidazolium ionic liquids as friction reduction and anti-wear additive in polyurea grease for steel/steel contacts. Tribol. Lett. 40, 215-224 (2010)
180. Cai, M.; Liang, Y.; Zhou, F.; Liu, W.: Tribological properties of novel imidazolium ionic liquids bearing benzotriazole group as the antiwear/anticorrosion additive in poly(ethyleneglycol) and polyurea grease for steel/steel contacts. ACS Appl. Mater. Interf. 3, 4580-4592 (2011)
181. Wang, Z.; Xia, Y.; Liu, Z.; Wen, Z.: Conductive lubricating grease synthesized using the ionic liquid. Tribol. Lett. 46, 33-42 (2012)
182. Wang, Z.; Xia, Y.; Liu, Z.: Comparative study of the tribological properties of ionic liquids as additives of the attapulgite and bentone greases. Lubr. Sci. 24, 174-187 (2012)
183. Samuel, S.; Nag, S.; Scharf, T.W.; Banerjee, R.: Wear resistance of laser-deposited boride reinforced Ti-Nb-Zr-Ta alloy composites for orthopedic implants. Mater. Sci. Eng. C 28, 414-420 (2008)
184. Majumdar, P.; Singh, S.B.; Chakraborty, M.: The influence of heat treatment and role of boron on sliding wear behaviour of β-type Ti-35Nb-7.2Zr-5.7Ta alloy in dry condition and in simulated body fluids. J. Mech. Behav. Biomed. Mater. 4, 284-297 (2011)
185. Anabtawi, M.; Beck, P.; Lemons, J.: Biocompatibility testing of simulated total joint arthoplasty articulation debris. J. Biomed. Mater. Res. Part B Appl. Biomater. 84B, 478-485 (2008)
186. Klepper, C.C.; Williams, J.M.; Truhan, J.J.; Qu, J.; Riester, L.: Tribo-mechanical properties of thin boron coatings deposited on polished cobalt alloy surfaces for orthopedic applications. Thin Solid Films 516, 3070-3080 (2008)
187. Pawlak, Z.; Pai, R.; Bayraktar, E.; Kaldonski, T.; Oloyede, A.: Lamellar lubrication in vivo and vitro: friction testing of hexagonal boron nitride. BioSystems 94, 202-208 (2008)
188. Lahiri, D.; Rouzaud, F.; Richard, T.; Keshri, A.; Bakshi, S.: Boron nitride nanotube reinforced polylactide-polycaprolactone copolymer composite: mechanical properties and cytocompatibility with osteoblasts and macrophages in vitro. Acta Biomater. 6, 3524-3533 (2010)
189. Lahiri, D.; Singh, V.; Benaduce, A.; Seal, S.; Kos, L.: Boron nitride nanotube reinforced hydroxyapatite composite: mechanical and tribological performance and in vitro biocompatibility to osteoblasts. J. Mech. Behav. Biomed. Mater. 4, 44-56 (2011)
190. Brown, P.; Bellaloui, N.; Wimmer, M.; Bassil, E.; Ruiz, J.: Boron in plant biology. Plant Biol. 4, 205-223 (2002)
191. Takano, J.; Miwa, K.; Fujiwara, T.: Boron transport mechanisms: collaboration of channels and transporters. Trends Plant Sci. 13, 451-457 (2008)
192. Takeda, S.; Matsuoka, M.: Genetic approaches to crop improvement: responding to environmental and population changes. Nat. Rev. Genet. 9, 444-457 (2008)
193. Hunt, C.: Dietary boron: an overview of the evidence for its role in immune function. J. Tr. Elem. Exp. Med. 16, 291-306 (2003)
194. Fort, D.; Stover, E.; Strong, P.; Murray, F.; Keen, C.: Chronic feeding of a low boron diet adversely affects reproduction and development in Xenopus laevis. J. Nutr. 129, 2055-2060 (1999)
195. Bai, Y.; Hunt, C.: Dietary boron enhances efficacy of cholecalciferol in broiler chicks. J. Tr. Elem. Exp. Med. 9, 117-132 (1996)
196. Hilal, N.; Kim, G.J.; Somerfield, C.: Boron removal from saline water: a comprehensive review. Desalination 273, 23-35 (2011)
197. Fail, P.A.; Chapin, R.E.; Price, C.J.; Heindel, J.J.: General, reproductive, developmental, and endocrine toxicity of boronated compounds. Reprod. Toxicol. 12, 1-18 (1998)
198. Issa, F.; Kassiou, M.; Rendina, L.M.: Boron in drug discovery: carboranes as unique pharmacophores in biologically active compounds. Chem. Rev. 111, 5701-5722 (2011)
199. Baker, S.J.; Ding, C.Z.; Akama, T.; Zhang, Y.; Hernandez, V.; Xia, Y.: Therapeutic potential of boron-containing compounds. Future Med. Chem. 1, 1275-1288 (2009)
200. Sayli, B.S.; Tuccar, E.; Elhan, A.H.: An assessment of fertility in boron-exposed Turkish subpopulations. Rep. Toxicol. 12, 297-304 (1998)
201. Duydu, Y.; Basaran, N.; Ustundag, A.; Aydan, S.; Undeger, U.: Reproductive toxicity parameters and biological monitoring in occupationally and environmentally boron-exposed persons in Bandarma, Turkey. Arch. Toxicol. 85, 589-600 (2011)
202. Chen, X.; Wu, P.; Rousseas, M.; Okawa, D.; Gartner, Z.: Boron nitride nanotubes are noncytotoxic and can be functionalized for interaction with proteins and cells. J. Am. Chem. Soc. 131, 890 (2009)
203. Ciofani, G.; Raffa, V.; Menciassi, A.; Cuschieri, A.: Cytocompatibility, interactions, and uptake of polyethyleneimine-coated boron nitride nanotubes by living cells: confirmation of their potential for biomedical applications. Biotechnol. Bioeng. 101, 850-858 (2008)
204. Glavatskih, S.: Tribotronics - monitoring based active friction control. In: Wang, Q.; Chung, Y. (eds.) Encyclopedia of Tribology. Springer-Verlag, Berlin, Heidelberg (2013)
205. Sweeney, J.; Hausen, F.; Hayes, R.; Webber, G.B.; Endres, F.; Rutland, M.W.; Bennewitz, R.; Atkin, R.: Control of nanoscale friction on gold in an ionic liquid by a potential-dependent ionic lubricant layer. Phys. Rev. Lett. 109, 155502-155505 (2012)