A review of dry particulate lubrication: Powder and granular materials

Journal of Tribology

Volumn 129, Issue 2, 2007, Pages 438-449

  Wornyoh, Emmanuel Y A ^a   Jasti, Venkata K ^a   Higgs III, C Fred ^a  

^a CARNEGIE MELLON UNIVERSITY   (United States)

Author keywords

Classification system; Cohesionless and cohesive; Dry particulates; Experiments; Granular and powder lubricants; Momentum; Numerical simulation; Theory

Indexed keywords

COMPUTER SIMULATION; GRANULAR MATERIALS; MOMENTUM; POWDERS; SHEAR DEFORMATION; TRIBOLOGY; VELOCITY DISTRIBUTION;

DRY PARTICULATE LUBRICANTS; SLIDING CONTACTS; SURFACE VELOCITY DIFFERENCE;

LUBRICANTS;

COMPUTER SIMULATION; GRANULAR MATERIALS; LUBRICANTS; MOMENTUM; POWDERS; SHEAR DEFORMATION; TRIBOLOGY; VELOCITY DISTRIBUTION;

EID: 34249072466     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2647859     Document Type: Review

References (147)

1. Heshmat, H., 1995, "The Quasi-Hydrodynamic Mechanism of Powder Lubrication. 3: On Theory and Rheology of Triboparticulates," Tribol. Trans., 38(2), pp. 269-276.
2. Heshmat, H., 1991, "The Rheology and Hydrodynamics of Dry Powder Lubrication," Tribol. Trans., 34(3), pp. 433-439.
3. 2 Powder-Experimental-Study of Thermal Phenomena," ASME J. Tribol., 117(3), pp. 506-512.
4. 2 Powder: Experimental Study," ASME J. Tribol., 118(3), pp. 484-491.
5. Heshmat, H., and Heshmat, C. A., 1999, "Effect of Slider Geometry on the Performance of a Powder Lubricated Bearing," Tribol. Trans., 42(3), pp. 640-646.
6. 2 Powder Particle Detachment Process," ASME J. Tribol., 123(3), pp. 455-461.
7. 2 as Powder Lubricants in High Speed, Multi-Pad Journal Bearings," ASME J. Tribol., 121(3), pp. 625-630.
8. Farr, J. P. G., 1975, "Molybdenum-Disulfide in Lubrication - Review," Wear, 35(1), pp. 1-22.
9. Kaur, R. G., and Heshmat, H., 2002, "100 mm Diameter Self-Contained Solid/Powder Lubricated Auxiliary Bearing Operated at 30,000 rpm," Lubr. Eng., 58(6), pp. 13-20.
10. Kaur, R. G., Higgs, C. F., and Heshmat, H., 2001, "Pin-on-Disc Tests of Pelletized Molybdenum Disulfide," Tribol. Trans., 44(1), pp. 79-87.
11. Elrod, H. G., 1988, "Granular Flow as a Tribological Mechanism - A First Look," Interface Dynamics, Proc. of the Leeds-Lyon Conference, Butterworth, Oxford, England, p. 75.
12. Higgs, C. F., and Tichy, J., 2004, "Granular Flow Lubrication: Continuum Modeling of Shear Behavior," ASME J. Tribol., 126(3), pp. 499-510.
13. Yu, C. M., Craig, K., and Tichy, J., 1994, "Granular Collision Lubrication," J. Rheol., 38(4), pp. 921-936.
14. Yu, C. M., and Tichy, J., 1996, "Granular Collisional Lubrication: Effect of Surface Roughness, Particle Size and Solids Fraction," Tribol. Trans., 39(3), pp. 537-546.
15. Heshmat, H., and Walton, J. F., 1991, "Basics of Powder Lubrication in High-Temperature Powder-Lubricated Dampers," Proc. of International Gas Turbine and Aeroengine Congress and Exposition, June 3-6 1991, Orlando, ASME, New York, pp. 372-382.
16. Heshmat, H., and Walton, J. F., 1992, "High-Temperature Powder-Lubricated Dampers for Gas-Turbine Engines," J. Propul. Power, 8(2), pp. 449-456.
17. Heshmat, H., and Walton, J. F., 1993, "The Basics of Powder Lubrication in High-Temperature Powder-Lubricated Dampers," ASME J. Eng. Gas Turbines Power, 115(2), pp. 372-382.
18. Fusaro, R. L., 1989, "Comparison of the Tribological Properties of Fluorinated Cokes and Graphites," Tribol. Trans., 32(2), pp. 121-132.
19. Hirata, A., Igarashi, M., and Kaito, T., 2004, "Study on Solid Lubricant Properties of Carbon Onions Produced by Heat Treatment of Diamond Clusters or Particles," Tribol. Int., 37(11-12), pp. 899-905.
20. Heshmat, H., 1993, "Rolling and Sliding Characteristics of Powder-Lubricated Ceramics at High-Temperature and Speed," Lubr. Eng., 49(10), pp. 791-797.
21. Tsai, H. J., and Jeng, Y. R., 2006, "Characteristics of Powder Lubricated Finite-Width Journal Bearings: A Hydrodynamic Analysis," ASME J. Tribol., 128(2), pp. 351-357.
22. Sawyer, W. G., and Tichy, J. A., 2001, "Lubrication With Granular Flow: Continuum Theory, Particle Simulations, Comparison With Experiment," ASME J. Tribol., 123(4), pp. 777-784.
23. 2 Nanoparticles," Surf. Coat. Technol., 160(2-3), pp. 282-287.
24. Leshchinsky, V., Alyoshina, E., Lvovsky, M., Volovik, Y., Lapsker, I., Tenne, R., and Rapoport, L., 2002, "Inorganic Nanoparticle Impregnation of Self Lubricated Materials," Int. J. Powder Metall., 38(5), pp. 50-57.
25. 2) Inorganic Nanotubes and Fullerene-Like Nanoparticles for Solid Lubrication and for Structural Nanocomposites," J. Mater. Chem., 15(18), pp. 1782-1788.
26. 2) Inorganic Fullerene-Like Nanoparticles as Solid Lubrication," Proc. of World Tribology Congress III, Washington, D.C., ASME, New York, pp. 607-608.
27. Rapoport, L., Leshchinsky, V., Lvovsky, M., Lapsker, I., Volovik, Y., Feldman, Y., Popovitz-Biro, R., and Tenne, R., 2003, "Superior Tribological Properties of Powder Materials With Solid Lubricant Nanoparticles," Wear, 255(7-12), pp. 794-800.
28. Higgs III, C. F., Jasti, V., Racusen, C., Heller, C., Cohen, N., and Tichy, J., 2006, "On the Behavior of Granular Materials in Rough Wheel Contacts on Mars," 10th ASCE Aerospace Division International Conference on Engineering, Construction and Operations in Challenging Environments (Earth & Space 2006), Houston.
29. Massoudi, M., and Phuoc, T. X., 2005, "Numerical Solution to the Shearing Flow of Granular Materials Between Two Plates," Int. J. Non-Linear Mech., 40(1), pp. 1-9.
30. Wyszynski, M. L., and Bridgwater, J., 1993, "Effect of Solid Lubricants on Powder Attrition and Breakage," Tribol. Int., 26(5), pp. 311-317.
31. Heshmat, H., 1992, "The Quasi-Hydrodynamic Mechanism of Power Lubrication. 1: Lubricant Flow Visualization," Lubr. Eng., 48(2), pp. 96-104.
32. McKeague, K. T., and Khonsari, M. M., 1996, "An Analysis of Powder Lubricated Slider Bearings," ASME J. Tribol., 118(1), pp. 206-214.
33. Higgs, C. F., and Tichy, J., 2004, "Granular Flow Lubrication: Continuum Modeling of Shear Behavior," ASME J. Tribol., 126(3), pp. 499-510.
34. Iordanoff, I., and Khonsari, M. M., 2004, "Granular lubrication: Toward an Understanding of the Transition Between Kinetic and Quasi-Fluid Regime," ASME J. Tribol., 126(1), pp. 137-145.
35. Jang, J. Y., and Khonsari, M. M., 2005, "On the Granular Lubrication Theory," Proc. R. Soc. London, Ser. A, 461 (2062), pp. 3255-3278.
36. Jang, J. Y., and Khonsari, M. M., 2006, "On the Role of Enduring Contact in Powder Lubrication," ASME J. Tribol., 128(1), pp. 168-175.
37. Jeng, Y. R., and Tsai, H. J., 2005, "Grain Flow for Rough Surfaces Considering Grain/Grain Collision Elasticity," ASME J. Tribol., 127(4), pp. 837-844.
38. Khonsari, M. M., 1997, "On the Modeling of Multi-Body Interaction Problems in Tribology," Wear, 207(1-2), pp. 55-62.
39. Hsu, S. M., 2004, "Nano-Lubrication: Concept and Design," Tribol. Int., 37(7), pp. 537-545.
40. Morrow, C. A., and Lovell, M. R., 2005, "A Solution for Lightly Loaded Adhesive Rough Surfaces With Application to MEMS," ASME J. Tribol., 127(1), pp. 206-212.
41. Heshmat, H., and Brewe, D. E., 1993, "On the Cognitive Approach Toward Classification of Dry Triboparticulates," 20th Leeds Lyon Symposium on Tribology, Elsevier, New York, Tribology Series, pp. 303-325.
42. Heshmat, H., and Brewe, D. E., 1991, "On Some Experimental Rheological Aspects of Triboparticulates," Proc. of 18th Leeds-Lyon Symposium on Wear Particles: From the Cradle to the Grave, Lyon, France, Elsevier, Amsterdam, Netherlands, pp. 357-367.
43. Higgs III, C. F., 2001, "Particulate Flow Lubrication: Continuum Modeling of Shear Behavior," Ph.D. thesis, Department of Mechanical Engineering, Rensselaer Polytechnic Institute, Troy, NY.
44. Bridgwater, J., 1984, "Fluid Effects in Powder Mechanics," Powder Technol., 37, pp. 245-254.
45. Rietema, K., 1984, "Powders, What are They?," Powder Technol., 37, pp. 5-23.
46. Godet, M., Berthier, Y., Lancaster, J., and Vincent, L., 1991, "Wear Modeling: How Far Can We Get With First Principles," Proc. of Symposium on Tribological Modeling for Mechanical Designers, May 23, 1990, San Francisco, ASTM, Philadelphia, pp. 173-179.
47. Niccolini, E., and Berthier, Y., 2005, "Wheel-Rail Adhesion: Laboratory Study of 'Natural' Third Body Role on Locomotives Wheels and Rails," Wear, 258(7-8), pp. 1172-1178.
48. Erdemir, A., 1994, "Crystal Chemistry and Solid Lubricating Properties of the Monochalcogenides Gallium Selenide and Tin Selenide," STLE Tribol. Trans., 37(3), pp. 471-478.
49. Kustas, F. M., and Buchholtz, B. W., 1996, "Lubricious-Surface-Silicon-Nitride Rings for High-Temperature Tribological Applications," Tribol. Trans., 39(1), p. 43.
50. Rosado, L., Forster, N. H., and Wittberg, T. N., 2000, "Solid Lubrication of Silicon Nitride With Cesium-Based Compounds: Part II - Surface Analysis," Tribol. Trans., 43(3), p. 521.
51. Sawyer, W. G., Ziegert, J. C., Schmitz, T. L., and Barton, A., 2006, "In Situ Lubrication With Boric Acid: Powder Delivery of an Environmentally Benign Solid Lubricant," Tribol. Trans., 49(2), pp. 284-290.
52. Lovell, M., Higgs III, C. F., and Mobley, A. J., 2005, "A Novel Particulate-Fluid Lubricant for Environmentally Benign Forming Processes," Proceedings of the World Tribology Congress III, Washington, D.C.
53. Deshmukh, P., Lovell, M., Sawyer, W. G., and Mobley, A., 2006, "On the Friction and Wear Performance of Boric Acid Lubricant Combinations in Extended Duration Operations," Wear, 260(11-12), p. 1295.
54. Lu, K., Brodsky, E. E., and Kavehpour, H. P., 2005, "Tribological Aspects and Fluidity of Dense Granular Flow," ASME International Mechanical Engineering Congress and Exposition, November 2005, Orlando, FL.
55. Mei, R., Klausner, J. F., Shang, H., and Kallman, E., 1997, "On the Improved Flowability of Cohesive Powders by Coating With Fine Particles," Proc. of 1997 TMS Annual Meeting, Feb 9-13, Orlando, Minerals, Metals, and Materials Soc (TMS), Warrendale, PA, pp. 225-236.
56. Mei, R., Shang, H., Walton, O. R., and Klausner, J. F., 2000, "Concentration Non-Uniformity in Simple Shear Flow of Cohesive Powders," Powder Technol., 112(1), pp. 102-110.
57. Massoudi, M., and Mehrabadi, M. M., 2001, "A Continuum Model for Granular Materials: Considering Dilatancy and the Mohr-Coulomb Criterion," Acta Mech., 152(1-4), pp. 121-138.
58. Tanner, R. I., 1985, Engineering Rheology, 1st ed., Clarendon Press, Oxford, p. 451.
59. Akers, R., 1984, "The Role of Particle Interactions in Powder Mechanics, Papers Presented at a Symposium Held in Eindhoven, the Netherlands, August 29-31, 1983 - Introduction," Powder Technol., 37, pp. 1-4.
60. Iordanoff, I., Berthier, Y., Descartes, S., and Heshmat, H., 2002, "A Review of Recent Approaches for Modeling Solid Third Bodies," ASME J. Tribol., 124(4), pp. 725-735.
61. Berthier, Y., Godet, M., and Brendle, M., 1989, "Velocity Accommodation in Friction," Tribol. Trans., 32(4), pp. 490-496.
62. Berthier, Y., Vincent, L., and Godet, M., 1992, "Velocity Accommodation Sites and Modes in Tribology," Eur. J. Mech. A/Solids, 11(1), pp. 35-47.
63. Tardos, G. I., McNamara, S., and Talu, I., 2003, "Slow and Intermediate Flow of a Frictional Bulk Powder in the Couette Geometry," Powder Technol., 131(1), pp. 23-39.
64. Kohen, I., Play, D., and Godet, M., 1980, "Effect of Machine Rigidity or Degrees of Freedom on the Load-Carrying Capacity of Wear Debris," Wear, 61(2), pp. 381-384.
65. Godet, M., 1984, "The 3rd-Body Approach - A Mechanical View of Wear," Wear, 100(1-3), pp. 437-452.
66. Berthier, Y., 1990, "Experimental-Evidence for Friction and Wear Modeling," Wear, 139(1), pp. 77-92.
67. Fillot, N., Iordanoff, I., and Berthier, Y., 2005, "Widening Classical Wear Laws to the Concept of Third Body," Proc. of World Tribology Congress III, Washington, D.C., ASME, New York, pp. 51-52.
68. Descartes, S., Desrayaud, C., Niccolini, E., and Berthier, Y., 2005, "Presence and Role of the Third Body in a Wheel-Rail Contact: Contact Mechanics and Wear of Rail/Wheel Systems," Wear, 258(7-8), pp. 1081-1090.
69. Iordanoff, I., Seve, B., and Berthier, Y., 2002, "Solid Third Body Analysis Using a Discrete Approach: Influence of Adhesion and Particle Size on Macroscopic Properties," ASME J. Tribol., 124(3), pp. 530-538.
70. Fillot, N., Iordanoff, I., and Berthier, Y., 2005, "Simulation of Wear Through Mass Balance in a Dry Contact," ASME J. Tribol., 127(1), pp. 230-237.
71. Wornyoh, E., and Higgs, C. F., 2005, "Self-Replenishing, Self-Repairing Solid Lubrication: Modeling and Experimentation," Proc. of World Tribology Conference III, Washington, D.C., ASME, New York, pp. 409-410.
72. Dickrell, P. L., Sawyer, W. G., and Erdemir, A., 2004, "Fractional Coverage Model for the Adsorption and Removal of Gas Species and Application to Superlow Friction Diamond-Like Carbon," ASME J. Tribol., 126(3), pp. 615-619.
73. Sawyer, W. G., and Blanchet, T. A., 2001, "Vapor-Phase Lubrication in Combined Rolling and Sliding Contacts: Modeling and Experimentation," ASME J. Tribol., 123(3), pp. 572-581.
74. Higgs III, C. F., and Tichy, J., 2004; "Granular Flow Lubrication: Continuum Modeling of Shear Behavior," ASME J. Tribol., 126, pp. 499-510.
75. Sawyer, W. G., and Tichy, J., 2001, "Lubrication With Grain Flow: Continuum Theory, Particle Simulations, Comparison With Experiment," ASME J. Tribol., 123(4), pp. 777-784.
76. Zhou, L., and Khonsari, M. M., 2000, "Flow Characteristics of a Powder Lubricant Sheared Between Parallel Plates," ASME J. Tribol., 122, pp. 147-154.
77. Tsai, H. J., and Jeng, Y. R., 2002, "An Average Lubrication Equation for Thin Film Grain Flow With Surface Roughness Effects," ASME J. Tribol., 124(4), pp. 736-742.
78. Haff, P. K., 1983, "Grain Flow as a Fluid-Mechanical Phenomenon," J. Fluid Mech., 134, pp. 401-430.
79. Lun, C. K. K., Savage, S. B., Jeffrey, D. J., and Chepurniy, N., 1984, "Kinetic Theories for Granular Flow - Inelastic Particles in Couette-Flow and Slightly Inelastic Particles in a General Flowfield," J. Fluid Mech., 140, pp. 223-256.
80. Bocquet, L., Losert, W., Schalk, D., Lubensky, T. C., and Gollub, J. P., 2002, "Granular Shear Flow Dynamics and Forces: Experiment and Continuum Theory," Phys. Rev. E, 65(1), p. 011307.
81. Chen, D. M., Klausner, J. F., and Mei, R. W., 2002, "A Fluid Mechanics Approach to Describing the Behavior of Pneumatically Conveyed Powder Plugs," Powder Technol., 124(1-2), pp. 127-137.
82. Tardos, G. I., Khan, M. I., and Schaeffer, D. G., 1998, "Forces on a Slowly Rotating, Rough Cylinder in a Couette Device Containing a Dry, Frictional Powder," Phys. Fluids, 10(2), pp. 335-341.
83. Heshmat, H., 1993, "Wear Reduction Systems for Coal-Fueled Diesel Engines, II. Experimental Results and Hydrodynamic Model of Powder Lubrication," Proc. of the 9th International Conference on Wear of Materials, April 13-16, Wear, 162-164(Pt A), pp. 518-528.
84. Dai, F. L., Khonsari, M. M., and Lu, Z. Y., 1994, "On the Lubrication Mechanism of Grain Flows," Tribol. Trans., 37(3), pp. 516-524.
85. Heshmat, H., 1992, "The Quasi-Hydrodynamic Mechanism of Powder Lubrication. 2: Lubricant Film Pressure Profile," Lubr. Eng., 48(5), pp. 373-383.
86. Sawyer, W. G., and Tichy, J. A., 2001, "Lubrication With Granular Flow: Continuum Theory, Particle Simulations, Comparison With Experiment," ASME J. Tribol., 123(4), pp. 777-784.
87. Zhou, L., and Khonsari, M. M., 2000, "Flow Characteristics of a Powder Lubricant Sheared Between Parallel Plates," ASME J. Tribol., 122(1), pp. 147-155.
88. Pappur, M., and Khonsari, M. M., 2003, "Flow Characterization and Performance of a Powder Lubricated Slider Bearing," ASME J. Tribol., 125(1), pp. 135-144.
89. Savage, S. B., and Jeffrey, D. J., 1981, "The Stress Tensor in a Granular Flow at High Shear Rates," J. Fluid Mech., 110 (SEP), pp. 255-272.
90. Carnahan, N. F., and Starling, K., 1969, "Equations of State for Non-Attracting Rigid Spheres," J. Chem. Phys., 51, pp. 635-636.
91. Johnson, P. C., and Jackson, R., 1987, "Frictional- Collisional Constitutive Relations for Granular Materials With Applications to Plane Shearing," J. Fluid Mech., 176, pp. 67-93.
92. Mohan, L. S., Rao, K. K., and Nott, P. R., 2002, "A Frictional Cosserat Model for the Slow Shearing of Granular Materials," J. Fluid Mech., 457, pp. 377-409.
93. Jenkins, J. T., and Richman, M. W., 1985, "Kinetic-Theory for Plane Flows of a Dense Gas of Identical, Rough, Inelastic, Circular Disks," Phys. Fluids, 28(12), pp. 3485-3494.
94. Hui, K., Haff, P. K., Ungar, J. E., and Jackson, R., 1984, "Boundary Conditions for High Shear Grain Flows," J. Fluid Mech., 145, pp. 223-233.
95. Tardos, G. I., 1997, "A Fluid Mechanistic Approach to Slow, Frictional Flow of Powders," Powder Technol., 92(1), pp. 61-74.
96. Klausner, J. F., Chen, D. M., and Mei, R. W., 2000, "Experimental Investigation of Cohesive Powder Rheology," Powder Technol., 112(1-2), pp. 94-101.
97. Bagnold, R. A., 1954, "Experiments on a Gravity-Free Dispersion of Large Solid Spheres in a Newtonian Fluid Under Shear," Proc. R. Soc. London, Ser. A, 225(1160), pp. 49-63.
98. Veje, C. T., Howell, D. W., and Behringer, R. P., 1999, "Kinematics of a Two-Dimensional Granular Couette Experiment at the Transition to Shearing," Phys. Rev. E, 59(1), pp. 739-745.
99. Howell, D., Behringer, R. P., and Veje, C., 1999, "Stress Fluctuations in a 2D Granular Couette Experiment: A Continuous Transition," Phys. Rev. Lett., 82(26), pp. 5241-5244.
100. Mueth, D. M., Debregeas, G. F., Karczmar, G. S., Eng, P. J., Nagel, S. R., and Jaeger, H. M., 2000, "Signatures of Granular Microstructure in Dense Shear Flows," Nature (London), 406(6794), pp. 385-389.
101. Losert, W., Bocquet, L., Lubensky, T. C., and Gollub, J. P., 2000, "Particle Dynamics in Sheared Granular Matter," Phys. Rev. Lett., 85(7), pp. 1428-1431.
102. MiDi, G. D. R., 2004, "On Dense Granular Flows," Eur. Phys. J. E, 14(4), pp. 341-365.
103. Jasti, V. K., and Higgs, C. E, 2006, "A Lattice-Based Cellular Automata Modeling Approach for Granular Flow Lubrication," ASME J. Tribol., 128(2), pp. 358-364.
104. Savage, S. B., and Sayed, M., 1984, "Stresses Developed by Dry Cohesionless Granular-Materials Sheared in an Annular Shear Cell," J. Fluid Mech., 142, pp. 391-430.
105. Hanes, D. M., and Inman, D. L., 1985, "Observations of Rapidly Flowing Granular-Fluid Materials," J. Fluid Mech., 150, pp. 357-380.
106. Miller, B., Ohern, C., and Behringer, R. P., 1996, "Stress Fluctuations for Continuously Sheared Granular Materials," Phys. Rev. Lett., 77(15), pp. 3110-3113.
107. Craig, K., Buckholz, R. H., and Domoto, G., 1986, "An Experimental Study of the Rapid Flow of Dry Cohesionless Metal Powders," ASME J. Appl. Mech., 53, pp. 935-942.
108. Craig, K., Buckholz, R. H., and Domoto, G., 1987, "Effect of Shear Surface Boundaries on Stress for Shearing Flow of Dry Metal Powders-An Experimental Study," ASME J. Tribol., 109, pp. 232-237.
109. Heshmat, H., 1991, "High-Temperature Solid-Lubricated Bearing Development - Dry Powder-Lubricated Traction Testing," J. Propul. Power, 7(5), pp. 814-820.
110. Campbell, C. S., and Brennen, C. E., 1985, "Computer-Simulation of Granular Shear Flows," J. Fluid Mech., 151, pp. 167-188.
111. McKeague, K. T., and Khonsari, M. M., 1996, "Generalized Boundary Interactions for Powder Lubricated Couette Flows," ASME J. Tribol., 118(3), pp. 580-588.
112. Cundall, P. A., and Strack, O. D. L., 1979, "Discrete Numerical-Model for Granular Assemblies," Geotechnique, 29(1), pp. 47-65.
113. Babic, M., Shen, H. H., and Shen, H. T., 1990, "The Stress Tensor in Anti-granulocytes Shear Flows of Uniform, Deformable Disks at High Solids Concentrations," J. Fluid Mech., 219, pp. 81-118.
114. Hopkins, M. A., and Louge, M. Y., 1991, "Inelastic Microstructure in Rapid Antigranulocytes Flows of Smooth Disks," Phys. Fluids A, 3(1), pp. 47-57.
115. Jenkins, J. T., and Richman, M. W., 1988, "Plane Simple Shear of Smooth Inelastic Circular Disks - the Anisotropy of the 2nd Moment in the Dilute and Dense Limits," J. Fluid Mech., 192, pp. 313-328.
116. Thompson, P. A., and Grest, G. S., 1991, "Granular Flow - Friction and the Dilatancy Transition," Phys. Rev. Lett., 67(13), pp. 1751-1754.
117. Yi, Z., and Campbell, C. S., 1992, "The Interface Between Fluid-Like and Solid-Like Behavior in 2-Dimensional Granular Flows," J. Fluid Mech., 237, pp. 541-568.
118. Karion, A., and Hunt, M. L., 2000, "Wall Stresses in Granular Couette Flows of Mono-Sized Particles and Binary Mixtures," Powder Technol., 109(1-3), pp. 145-163.
119. Kim, H., and Rosato, A. D., 1992, Particle Simulations of the Flow of Smooth Spheres between Bumpy Boundaries, Advances in Micromechanics of Granular Materials, Shen, H., Satake, M., Mehrabadi, M., Chang, C. S., and Campbell, C., eds., Elsevier, New York.
120. Louge, M. Y., 1994, "Computer-Simulations of Rapid Granular Flows of Spheres Interacting With a Flat, Frictional Boundary," Phys. Fluids, 6(7), pp. 2253-2269.
121. Louge, M. Y., Jenkins, J. T., and Hopkins, M. A., 1990, "Computer-Simulations of Rapid Granular Shear Flows Between Parallel Bumpy Boundaries," Phys. Fluids A, 2(6), pp. 1042-1044.
122. Lun, C. K. K., 1996, "Granular Dynamics of Inelastic Spheres in Couette Flow," Phys. Fluids, 8(11), pp. 2868-2883.
123. Rosato, A. D., and Kim, H., 1994, "Particle Dynamics Calculations of Wall Stresses and Slip Velocities - For Couette-Flow of Smooth Inelastic Spheres," Continuum Mech. Thermodyn., 6(1), pp. 1-20.
124. Savage, S. B., and Dai, R., 1993, "Studies of Granular Shear Flows - Wall Slip Velocities, Layering and Self-Diffusion," Mech. Mater., 16(1-2), pp. 225-238.
125. Schwarz, O. J., Horie, Y., and Shearer, M., 1998, "Discrete Element Investigation of Stress Fluctuation in Granular Flow at High Strain Rates," Phys. Rev. E, 57(2), pp. 2053-2061.
126. Schollmann, S., 1999, "Simulation of a Two-Dimensional Shear Cell," Phys. Rev. E, 59(1), pp. 889-899.
127. Latzel, M., Luding, S., and Herrmann, H. J., 2000, "Macroscopic Material Properties from Quasi-static, Microscopic Simulations of a Two-dimensional Shear-cell," Granular Matter, 2(3), pp. 123-135.
128. Yi, Z., and Campbell, C. S., 1992, "The Interface Between Fluid-Like and Solid-Like Behaviour in Two-Dimensional Granular Flows," J. Fluid Mech., 237, pp. 541-568.
129. Campbell, C. S., and Brennen, C. E., 1985, "Computer Simulation of Granular Shear Flows," J. Fluid Mech., 151, pp. 167-188.
130. Savage, S. B., and Sayed, M., 1984, "Stresses Developed by Dry Cohesionless Granular Materials Sheared in an Annular Shear Cell," J. Fluid Mech., 142, pp. 391-430.
131. Walton, O., and Braun, R., 1993, "Simulation of Rotary-Drum and Repose Tests for Frictional Spheres and Rigid Sphere Clusters," Joint DOE/NSF Workshop on Flow of Particulates and Fluids, Ithaca, NY, Sept. 29-Oct. 1.
132. Walton, O., 1993, Numerical Simulation of Inelastic Frictional Particle-Particle Interactions in Particulate Two-Phase Flow, Butterworth-Heinemann, Boston.
133. Hopkins, M. A., Jenkins, J. T., and Louge, M. Y., 1993, "On the Structure of Three-Dimensional Shear Flows," Mech. Mater., 16(1-2), pp. 179-187.
134. Aharonov, E., and Sparks, D., 2002, "Shear Profiles and Localization in Simulations of Granular Materials," Phys. Rev. E, 65(5), p. 051302.
135. Mathia, T., and Louis, F., 1984, "Powder Mechanics in Tribology," Powder Technol., 37, pp. 155-167.
136. Molerus, O., and Nywlt, M., 1984, "The Influence of the Fine Particle Content on the Flow Behavior of Bulk Materials," Powder Technol,, 37, pp. 145-154.
137. Heshmat, H., Pinkus, O., and Godet, M., 1989, "On a Common Tribological Mechanism Between Interacting Surfaces," Tribol. Trans., 32(1), pp. 32-41.
138. Allam, I. M., 1991, "Solid Lubricants for Applications at Elevated-Temperatures - A Review," J. Mater. Sci., 26(15), pp. 3977-3984.
139. Heshmat, H., 1993, "Rolling and Sliding Characteristics of Powder-Lubricated Ceramics at High Temperature and Speed," Lubr. Eng., 49(10), pp. 791-797.
140. Diss, P., and Brendle, M., 1997, "A General Approach to Discontinuous Transfer Films: Influence of Sliding Speed and Stick-Slip Phenomena," Wear, 203, pp. 564-572.
141. Heshmat, H., 2000, "The Effect of Slider Geometry on the Performance of a Powder Lubricated Bearing - Theoretical Considerations," Tribol. Trans., 43(2), pp. 213-220.
142. Grattan, P. A., and Lancaster, J. K., 1967, "Abrasion by Lamellar Solid Lubricants," Wear, 10(6), pp. 453-468.
143. Heshmat, H., 1993, "Wear Reduction Systems for Coal-Fueled Diesel-Engines. 2. Experimental Results and Hydrodynamic Model of Powder Lubrication," Wear, 162, pp. 518-528.
144. MiDi, G. D. R., 2004, "On Dense Granular Flows," Eur. Phys. J. E, 14(4), pp. 341-365.
145. Edwards, S. F., 1990, "The Rheology of Powders," Rheol. Acta, 29(6), pp. 493-499.
146. Barois-Cazenave, A., Marchal, P., Falk, V., Choplin, L., 1999, "Experimental Study of Powder Rheological Behaviour," Powder Technol., 103(1), pp. 58-64.
147. Shen, A. Q., 2002, "Granular Fingering Patterns in Horizontal Rotating Cylinders," Phys. Fluids, 14(2), pp. 462-470.