Synergistic effects of boron-, sulfur-, and phosphorus-containing lubricants in boundary lubrication of steel surfaces

Tribology Transactions

Volumn 48, Issue 2, 2005, Pages 218-229

  Komvopoulos, K ^a   Pernama, S A ^a   Ma, J ^a   Yamaguchi, E S ^b   Ryason, P R ^c  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b CHEVRON ORONITE COMPANY LLC   (United States)

^c Tamalpais Tribology   (United States)

Author keywords

Additives; Antiwear tribofilms; Boundary lubrication; Friction; Wear mechanisms

Indexed keywords

ADDITIVES; BORON COMPOUNDS; BOUNDARY LAYER FLOW; FRICTION; LUBRICATION; PHOSPHORUS COMPOUNDS; PROTECTIVE COATINGS; SCANNING ELECTRON MICROSCOPY; STEEL; SULFUR COMPOUNDS; SURFACE PHENOMENA; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE; BOUNDARY CONDITIONS; PHOSPHORUS; THIN FILMS;

BOUNDARY LUBRICATION REGIME; GEAR OILS; SYNERGISTIC EFFECTS; TRIBOFILMS;

LUBRICANTS;

ANTIWEAR ADDITIVE; BOUNDARY LUBRICATION; FRICTION; WEAR RESISTANCE;

ANTIWEAR TRIBOFILMS; BOUNDARY LUBRICATION; SURFACE PROFILOMETRY; WEAR MECHANISMS;

EID: 18844454770     PISSN: 10402004     EISSN: None     Source Type: Journal    
DOI: 10.1080/05698190590927479     Document Type: Article

References (25)

1. McFadden, C., Soto, C. and Spencer, N. D. (1997), "Adsorption and Surface Chemistry in Tribology," Tribol. Int., 30, pp 881-888.
2. Roby, S. H., Yamaguchi, E. S. and Ryason, P. R. (2000), "Lubricant Additives for Mineral-Oil-Based Hydraulic Fluids," in Handbook of Hydraulic Fluid Technology, ed. G. E. Totten, Marcel Dekker, New York, pp 795-824.
3. Baldwin, B. A. (1977), "Relative Antiwear Efficiency of Boron and Sulfur Surface Species," Wear, 45, pp 345-353.
4. Diatto, P., Riva, R., Tinucci, L., Tripaldi, G., Giacobbe, S. and Ponti, G. (2002), "Boundary Lubrication and Interaction Effects with EP and AW Additives in a Carbide-Steel Contact," Lubr. Eng., 58, 4, pp 13-17.
5. Kim, S. M., Sit, C. Y., Komvopoulos, K., Yamaguchi, E. S. and Ryason, P. R. (2000), "Boundary Lubrication of Steel Surfaces with Borate, Phosphorus, and Sulfur Containing Lubricants at Relatively Low and Elevated Temperatures," Tribol. Trans., 43, pp 569-578.
6. Komvopoulos, K., Chiaro, V., Pakter, B., Yamaguchi, E. S. and Ryason, P. R. (2002), "Antiwear Tribofilm Formation on Steel Surfaces Lubricated With Gear Oil Containing Borate, Phosphorus, and Sulfur Additives," Tribol. Trans., 45, pp 568-575.
7. Komvopoulos, K., Do, V., Yamaguchi, E. S. and Ryason, P. R. (2003), "Effect of Sulfur- and Phosphorus-Containing Additives and Metal Deactivator on the Tribological Properties of Boundary-Lubricated Steel Surfaces," Tribol. Trans., 46, pp 315-325.
8. Sarin, R., Tuli, D. K., Verma, A. S., Rai, M. M. and Bhatnagar, A. K. (1994), "Additive-Additive Interactions: Search for Synergistic FM-EP-AW Composition," Wear, 174, pp 93-102.
9. Li, S., Zhang, R., Jin, Y., Wang, Y. and Tung, S. C. (2003), "Competitive Surface Interactions of Critical Additives with Piston Ring/Cylinder Liner Components under Lubricated Breaking-In Conditions," Lubr. Eng., 59, 7, pp 10-15.
10. Kasrai, M., Suominen Fuller, M., Bancroft, G. M., Yamaguchi, E. S. and Ryason, P. R. (2003), "X-Ray Absorption Study of the Effect of Calcium Sulfonate on Antiwear Film Formation Generated From Neutral and Basic ZDDPs: Part 1-Phosphorus Species," Tribol. Trans., 46, pp 534-542.
11. Kasrai, M., Suominen Fuller, M., Bancroft, G. M., Yamaguchi, E. S. and Ryason, P. R. (2003), "X-Ray Absorption Study of the Effect of Calcium Sulfonate on Antiwear Film Formation Generated From Neutral and Basic ZDDPs: Part 2-Sulfur Species," Tribol. Trans., 46, pp 543-549.
12. Minami, I., Hasegawa, T., Memita, M. and Hirao, K. (2002), "Investigation of Antiwear Additives for Synthetic Esters," Lubr. Eng., 58, 1, pp 18-22.
13. Komvopoulos, K., Do, V., Yamaguchi, E. S., Yeh, S. W. and Ryason, P. R. (2004), "X-ray Photoelectron Spectroscopy Analysis of Antiwear Tribofilms Produced on Boundary-Lubricated Steel Surfaces from Sulfur-and Phosphorus-Containing Additives and Metal Deactivator Additive," Tribol. Trans., 47, pp 321-327.
14. Kreuz, K. L., Fein, R. S. and Dundy, M. (1967), "EP Films from Borate Lubricants," ASLE Trans., 10, pp 67-76.
15. Adams, J. H. and Godfrey, D. (1981), "Borate Gear Lubricant - EP Film Analysis and Performance," Lubr. Eng., 37, 1, pp 16-21.
16. Qiao, Y., Liu, W., Oi, S., Xue, Q., Xu, B. and Ma, S. (1998), "The Tribochemical Mechanism of the Borate Modified by N-Containing Compound as Oil Additive," Wear, 215, pp 165-169.
17. Yao, J. (1997), "Antiwear Function and Mechanism of Borate Containing Nitrogen," Tribol. Int., 30, pp 387-389.
18. Yao, J. and Dong, J. (1996), "Antiwear Synergism of Borates and Dibutyl Tin Dilaurate," Lubr. Eng., 52, 7, pp 553-556.
19. Normand, V., Martin, J. M., Ponsonnet, L. and Inoue, K. (1998), "Micellar Calcium Borate as an Antiwear Additive," Tribol. Lett., 5, pp 235-242.
20. Varlot, K., Kasrai, M., Bancroft, G. M., Yamaguchi, E. S., Ryason, P. R. and Igarashi, J. (2001), "X-Ray Absorption Study of Antiwear Films Generated from ZDDP and Borate Micelles," Wear, 249, pp 1029-1035.
21. Ma, Y., Liu, J. and Zheng, L. (1994), "The Synergistic Effects of Oil Additive Sulphurized Olefin with Chemico-Thermal Treatment Surfaces of Steel," Wear, 176, pp 67-72.
22. Petrushina, I. M., Christensen, E., Bergqvist, R. S., Møller, P. B., Bjerrum, N. J., Høj, J., Kann, G. and Chorkendorff, I. (2000), "On the Chemical Nature of Boundary Lubrication of Stainless Steel by Chlorine- and Sulfur-Containing EP-Additives," Wear, 246, pp 98-105.
23. Zhang, N., Zhuang, D.-M., Liu, J.-J., Fang, X.-D. and Guan, M.-X. (2001), "Effect of Sulphide Layers on the Tribological Behavior of Steels under Boundary Lubrication Conditions," Appl. Surf. Sci., 181, pp 61-67.
24. Antony, J. P., Mittal, B. D., Naithani, K. P., Misra, A. K. and Bhatnagar, A. K. (1994), "Antiwear/Extreme Pressure Performance of Graphite and Molybdenum Disulphide Combinations in Lubricating Greases," Wear, 174, pp 33-37.
25. Jeng, Y.-R., Hwang, S.-J., Fong, Z. G.-H. and Shieh, J.-A. (2002), "The Effects of Adding Molybdenum Dithiocarbamate Additive to a Sulfur-Phosphorus Gear oil on Two Roller Apparatus Performance," Lubr. Eng., 58, 2, pp 9-15.