Structural and thermal properties of spray-dried methotrexate-loaded biodegradable microparticles

Journal of Thermal Analysis and Calorimetry

Volumn 112, Issue 2, 2013, Pages 555-565

  De Oliveira, Alice Rodrigues ^a   Molina, Eduardo Ferreira ^b   De Castro Mesquita, Philippe ^a   Fonseca, José Luís Cardozo ^a   Rossanezi, Gustavo ^b   De Freitas Fernandes Pedrosa, Matheus ^a   De Oliveira, Anselmo Gomes ^b   Da Silva Júnior, Arnóbio Antônio ^a  

^a FEDERAL UNIVERSITY OF RIO GRANDE DO NORTE   (Brazil)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

Author keywords

Methotrexate; PLGA microparticles; Spray drying; Thermal analysis

Indexed keywords

BIODEGRADABLE MICROPARTICLES; DRUG-POLYMER INTERACTION; ENCAPSULATION EFFICIENCY; METHOTREXATE; PLGA MICROPARTICLES; POLY(D ,L-LACTIDE-CO-GLYCOLIDE); POLYMERIC DRUG DELIVERY SYSTEM; SCANNING ELECTRONIC MICROSCOPY;

COPOLYMERS; DIFFERENTIAL SCANNING CALORIMETRY; DRUG DELIVERY; DRUG INTERACTIONS; ENCAPSULATION; SPRAY DRYING; THERMOANALYSIS; THERMODYNAMIC PROPERTIES; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

BIODEGRADABLE POLYMERS;

EID: 84880701718     PISSN: 13886150     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10973-012-2580-3     Document Type: Conference Paper

References (80)

1. Cai C, Chen X, Gong H. Interaction of anticancer drug methotrexate with nucleic acids analyzed by multi-spectroscopic method. Spectrochim Acta A. 2009;72:46-9.
2. Zhang Y, Zhuo R. Synthesis and drug release behavior of poly(trimethylene carbonate)-poly(ethylene glycol)-poly(trimethylene carbonate) nanoparticles. Biomaterials. 2005;26:2089-94.
3. Jeong Y, Seo D, Kim D, Choi C, Jang M, Nah J. Methotrexate-incorporated polymeric micelles composed of methoxy poly(ethylene glycol)-grafted chitosan. Macromol Res. 2009;17:538-43.
4. Hatanakaa K, Nakamurab N, Kojimac M, Ando K, Irie S, Bunno M, Nakaminef H, Uekusa T. Methotrexate-associated lymphoproliferative disorders mimicking angioimmunoblastic T-cell lymphoma. Pathol Res Pract. 2010;206:9-13.
5. Ayyappan S, Sundaraganesan N, Aroulmoji V, Murano E, Sebastian S. Molecular structure, vibrational spectra and DFT molecular orbital calculations (TD-DFT and NMR) of the antiproliferative drug methotrexate. Spectrochim Acta A. 2010;77:264-75.
6. Mouterde G, Baillet A, Gaujoux-Viala C, Cantagrel A, Wendling D, Loet XL, Schaeverbeke T. Optimizing methotrexate therapy in rheumatoid arthritis: a systematic literature review. Joint Bone Spine. 2011;78:587-92.
7. Warren RB, Hons MBCB, Griffiths CEM. Systemic therapies for psoriasis: methotrexate, retinoids, and cyclosporine. Clin Dermatol. 2008;26:438-47.
8. Javadzadeh Y, Hamishehkar H. Enhancing percutaneous delivery of methotrexate using different types of surfactants. Colloids Surf B. 2011;82:422-6.
9. Taheri A, Atyabi F, Nouri SF, Ahadi F, Derakhshan MA, Amini M, Ghahremani MH. Nanoparticles of conjugated methotrexate-human serum albumin: preparation and cytotoxicity evaluations. J Nanomater. 2011. doi: 10.1155/2011/768201.
10. Ofner CM III, Pica K, Bowman BJ, Chen CS. Growth inhibition, drug load, and degradation studies of gelatin/methotrexate conjugates. Int J Pharm. 2006;308:90-9.
11. Sin F, Sui C, Teng L, Liu X, Teng L, Meng Q, Li Y. Studies on the preparation, characterization and pharmacological evaluation of tolterodine PLGA microspheres. Int J Pharm. 2010;397:44-9.
12. Dai C, Wang B, Zhao H. Microencapsulation peptide and protein drugs delivery system. Colloids Surf B. 2005;41:117-20.
13. Saboktakina MR, Tabatabaie RM, Maharramov A, Ramazanov MA. Synthesis and in vitro studies of biodegradable thiolated chitosan hydrogels for breast cancer therapy. Int J Biol Macromol. 2011;48:747-52.
14. Javadzadeh Y, Ahadia F, Davarana S, Mohammadia G, Sabzevari A, Adibkia K. Preparation and physicochemical characterization of naproxen-PLGA nanoparticles. Colloids Surf B. 2010;81:498-502.
15. Cun D, Jensen DK, Maltesen MJ, Bunker M, Whiteside P, Scurr D, Foged C, Nielsen HM. High loading efficiency and sustained release of siRNA encapsulated in PLGA nanoparticles: quality by design optimization and characterization. Eur J Pharm Biopharm. 2011;77:26-35.
16. Saliba JB, Faraco AAG, Yoshida MI, Vasconcelos WL, Silva-Cunha A, Mansur HS. Development and characterization of an intraocular biodegradable polymer system containing cyclosporine-A for the treatment of posterior uveitis. Mater Res. 2008;11:207-11.
17. Hu Z, Liu Y, Yuan W, Wu F, Su J, Jin T. Effect of bases with different solubility on the release behavior of risperidone loaded PLGA microspheres. Colloids Surf B. 2011;86:206-11.
18. Jain RA. The manufacturing techniques of various drug loaded biodegradable poly (lactide-co-glycolide) (PLGA) devices. Biomaterials. 2000;21:2475-90.
19. Houchin ML, Topp EM. Chemical degradation of peptides and proteins in PLGA: a review of reactions and mechanisms. J Pharm Sci. 2008;97:2395-404.
20. Klose D, Delplace C, Siepmann J. Unintended potential impact of perfect sink conditions on PLGA degradation in microparticles. Int J Pharm. 2011;404:75-82.
21. Raffin RP, Jornada DS, Ré MI, Pohlmann AR, Guterres SS. Sodium patoprazole-loaded enteric microparticles prepared by spray drying: effect of the scale of production and process validation. Int J Pharm. 2006;324:10-8.
22. Billona A, Bataillea B, Gassanasb G, Jacob M. Development of spray-dried acetaminophen microparticles using experimental designs. Int J Pharm. 2000;203:159-68.
23. Rattes ALR, Oliveira WP. Spray drying conditions and encapsulating composition effects on formation and properties of sodium diclofenac microparticles. Powder Technol. 2007;171:7-14.
24. Li X, Anton N, Arpagaus C, Belleteix F, Vandamme TF. Nanoparticles by spray drying using innovative new technology: the Buchi nano spray dryer b-90. J Controlled Release. 2010;147:304-10.
25. Masters K. Spray drying handbook. 5th ed. New York: Longman Scientific & Technical; 1972.
26. Fua N, Zhou Z, Jones TB, Tan TTY, Wu WD, Lin SX, Chen XD, Chana PPY. Production of monodisperse epigallocatechin gallate (EGCG) microparticles by spray drying for high antioxidant activity retention. Int J Pharm. 2011;413:155-66.
27. Lee SH, Heng D, Ng WK, Chan H, Tan RBH. Nano spray drying: a novel method for preparing protein nanoparticles for protein therapy. Int J Pharm. 2011;403:192-200.
28. Liu W, Wu WD, Selomulya C, Chen XD. Uniform chitosan microparticles prepared by a novel spray-drying technique. Int J Chem Eng. 2011. doi: 10.1155/2011/267218.
29. Khvedelidze M, Mdzinarashvili T, Partskhaladze T, Nafee N, Schaefer UF, Lehr C, Schneider M. Calorimetric and spectrophotometric investigation of PLGA nanoparticles and their complex with DNA. J Therm Anal Calorim. 2010;99:337-48.
30. Fulias A, Vlase T, Vlase G, Doca N. Thermal behaviour of cephalexin in different mixtures. J Therm Anal Calorim. 2010;99:193-992.
31. Bruni G, Berdenni V, Milanese C, Girella A, Marini A. Drug-excipient compatibility studies in binary and ternary mixtures by physico-chemical techniques. J Therm Anal Calorim. 2010;102:193-201.
32. Pani NR, Nath LK, Acharya S, Bhuniya B. Application of DSC IST, and FTIR study in the compatibility testing of nateglinide with different pharmaceutical excipients. J Therm Anal Calorim. 2012;108:219-26.
33. He P, Davis SS, Illum L. Chitosan microspheres prepared by spray drying. Int J Pharm. 1999;187:53-65.
34. Huh Y, Cho H, Yoon I, Choia M, Kim JS, Oh E, Chung S, Shim C, Kim D. Preparation and evaluation of spray-dried hyaluronic acid microspheres for intranasal delivery of fexofenadine hydrochloride. Eur J Pharm Sci. 2010;40:9-15.
35. Chan HK, Gonda I. Methotrexate: existence of different types of solid. Int J Pharm. 1991;68:179-90.
36. Chadha R, Arora P, Kaur R, Saini A, Singla ML, Jain DS. Characterization of solvatomorphs of methotrexate using thermoanalytical and other techniques. Acta Pharm. 2009;59:245-7.
37. Giron D. Thermal analysis and calorimetric methods in the characterization of polymorphs and solvates. Thermochim Acta. 1995;248:1-59.
38. Sánchez EG, Jung HC, Yépez LM, Hermandez-Abad V. Relevancia del Polimorfismo em el área farmacêutica. Rev Mex Cienc Farm. 2007;38:57-76.
39. Oliveira OW, Petrovick PR. Secagem por aspersão (spray drying) de extratos vegetais: bases e aplicações. Rev Bras Farmacogn. 2010;20:641-50.
40. Cao XQ, Vassen R, Schwartz S, Jungen W, Tietz F, Stoever D. Spray-drying of ceramics for plasma-spray coating. J Eur Ceram Soc. 2000;20:2433-9.
41. Tonon RV, Brabet C, Hubinger MD. Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying. J Food Eng. 2008;88:411-8.
42. Wang A, Lu Y, Zhu R, Li S, Ma X. Effect of process parameters on the performance of spray dried hydroxyapatite microspheres. Powder Technol. 2009;191:1-6.
43. Schuck P, Dolivet A, Méjean S, Zhu P, Blanchard E, Jeantet R. Drying by desorption: a tool to determine spray drying parameters. J Food Process Eng. 2009;94:199-204.
44. Cal K, Sollohub K. Spray drying technique I: hardware and process parameters. J Pharm Sci. 2010;99:575-86.
45. Silva-Júnior AA, Matos JR, Formariz TP, Rossanezi G, Scarpa MV, Egito EST, Oliveira AG. Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone. Int J Pharm. 2009;368:45-55.
46. Silva-Júnior AA, Scarpa MV, Pestana KC, Mercuri LP, Matos JR, Oliveira AG. Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique. Thermochim Acta. 2008;467:91-8.
47. Gavini E, Chetoni P, Cossu M, Alvarez MG, Saettoneb MF, Giunchedi P. PLGA microspheres for the ocular delivery of a peptide drug, vancomycin using emulsification/spray-drying as the preparation method: in vitro/in vivo studies. Eur J Pharm Biopharm. 2004;57:207-12.
48. Beck-Broichsitter M, Schweiger C, Schmehl T, Gessler T, Seeger W, Kissel T. Characterization of novel spray-dried polymeric particles for controlled pulmonary drug delivery. J Controlled Release. 2012;158:329-35.
49. Mladenovska K, Cruaud O, Richomme P, Belamie E, Raicki RS, Venier-Julienne MC, Popovski E, Benoit JP, Goracinova K. 5-ASA loaded chitosan-Ca-alginate microparticles: preparation and physicochemical characterization. Int J Pharm. 2007;345:59-69.
50. Almeida EDP, Costa AA, Serafini MR, Rossetti FC, Marchetti JM, Sarmento VHV, Nunes RS, Valerio MEG, Araújo AAS, Lira AAM. Preparation and characterization of chloroaluminum phthalocyanine-loaded solid lipid nanoparticles by thermal analysis and powder X-ray diffraction techniques. J Therm Anal Calorim. 2012;108:191-6.
51. Chandak AR, Verma PRP. Design and development of hydroxypropyl methycellulose (HPMC) based polymeric films of methotrexate: physicochemical and pharmacokinetic evaluations. Yakugaku Zasshi. 2008;128:1057-66.
52. Gamisans F, Lacoulonche F, Chauvet A, Espina M, Garcia ML, Ege MA. Flurbiprofen-loaded nanospheres: analysis of the matrix structure by thermal methods. Int J Pharm. 1999;179:37-48.
53. Mainardes RM, Gremião MPD, Evagelista RC. Thermoanalytical study of praziquantel-loaded PLGA nanoparticles. Braz J Pharm Sci. 2006;42:523-30.
54. Allison SD. Effect of structural relaxation on the preparation and drug release behavior of poly(lactic-co-glycolic) acid microparticle drug delivery systems. J Pharm Sci. 2008;97:2022-35.
55. Erbetta CDC, Viegas CCB, Freitas RFS, Sousa RG. Síntese e caracterização térmica e química do copolímero Poli(d,l-lactídeo-co-glicolídeo). Polímeros. 2011;21:376-87.
56. Makadia HK, Siegel SJ. Poly lactic-co-glycolic acid (PLGA) as biodegradable controlled drug delivery carrier. Polymers. 2011;3:1377-97.
57. Rouse JJ, Mohamed F, Walle CF. Physical ageing and thermal analysis of PLGA microspheres encapsulating protein or DNA. Int J Pharm. 2007;339:112-20.
58. Park PP, Jonnalagadda S. Predictors of glass transition in the biodegradable poly-lactide and poly-lactide-co-glycolide polymers. J Appl Polym Sci. 2006;100:1983-7.
59. Giron D. Investigations of polymorphism and pseudo-polymorphism in pharmaceuticals by combined thermoanalytical techniques. J Therm Anal Calorim. 2001;64:37-60.
60. Bruni C, Milanese C, Berbenni V, Sartor F, Villa M, Marini A. Crystalline and amorphous phases of a new drug. J Therm Anal Calorim. 2010;102:297-303.
61. Herman C, Leyssens T, Vermylen V, Halloin V, Haut B. A new approach for the estimation of the melting enthalpy of metastable crystalline compounds using differential scanning calorimetry - application to the two crystallographic forms of Etiracetam. J Therm Anal Calorim. 2012;107:777-88.
62. Plano D, Lizarraga E, Palop JA, Sanmartin C. Study of polymorphism of organosulfur and organoselenium compounds. J Therm Anal Calorim. 2011;105:1007-13.
63. Jingou J, Shilei H, Weigi L, Danjun W, Tengfei W, Yi X. Preparation, characterization of hydrophilic and hydrophobic drug in combine loaded chitosan/cyclodextrin nanoparticles and in vitro release study. Colloids Surf B. 2011;83:103-7.
64. Chen M, Liu Y, Yang W, Li X, Liu L, Zhou Z, Wang Y, Li R, Zhang Q. Preparation and characterization of self-assembled nanoparticles of 6-O-cholesterol-modified chitosan for drug delivery. Carbohydr Polym. 2011;84:1244-51.
65. Yamashita K, Nakate T, Okimoto K, Ohike A, Tokunaga Y, Ibuki R, Higaki K, Kimura T. Establishment of new preparation method for solid dispersion formulation of tacrolimus. Int J Pharm. 2003;267:79-91.
66. Bikiaris D, Papageorgiou GZ, Stergiou A, Pavlidou E, Karavas E, Kanaze F, Georgarakis M. Physicochemical studies on solid dispersions of poorly water-soluble drugs evaluation of capabilities and limitations of thermal analysis techniques. Thermochim Acta. 2005;439:58-67.
67. Kim E, Chun M, Jang J, Lee I, Lee K, Choi H. Preparation of a solid dispersion of felodipine using a solvent wetting method. Eur J Pharm Biopharm. 2006;64:200-5.
68. Modi A, Tayad P. Enhancement of dissolution profile by solid dispersion. Pharm Sci Technol. 2006;7:1-6.
69. Mirza S, Heinamaki J, Miroshnyk I, Rantanen J, Christiansen L, Karjalainen M, Yliruusi J. Understanding processing-induced phase transformations in erythromycin-PEG 600 solid dispersions. J Pharm Sci. 2006;95:1723-32.
70. Kanazel FI, Kokkalou E, Niopas I, Georgarakis M, Stergiou A, Bikiaris D. Thermal analysis study of flavonoid solid dispersions having enhanced solubility. J Therm Anal Calorim. 2006;83:283-90.
71. Huang J, Li Y, Wigent RJ, Malick WA, Sandhu HK, Singhal D, Shah NH. Interplay of formulation and process methodology on the extent of nifedipine molecular dispersion in polymers. Int J Pharm. 2011;420:59-67.
72. Azevedo JR, Sizilio RH, Brito MB, Costa AMB, Serafini MR, Araujo AAS, Santos MRV, Lira AAM, Nunes RS. Physical and chemical characterization insulin-loaded chitosan-TPP nanoparticles. J Therm Anal Calorim. 2011;106:685-9.
73. Mothé CG, Azevedo AD, Drumond WS, Wang SH, Sinisterra RD. Preparation and characterization of poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide) (PLLA-PEG-PLLA) microspheres having encapsulated tetracycline. J Therm Anal Calorim. 2011;106:671-7.
74. Schawe JEK. About the changes of heat capacity, glass transition temperature and relaxation time during the polymerization reaction of thermosetting systems. Thermochim Acta. 2002;391:279-95.
75. Nandiyanto ABD, Okuyama K. Progress in developing spray-drying methods for the production of controlled morphology particles: from the nanometer to submicrometer size ranges. Adv Powder Technol. 2011;22:1-19.
76. Gradon L, Janeczko S, Abdullah M, Iskandar F, Okuyama K. Selforganization kinetics of mesoporous nanostructured particles. AIChE J. 2004;50:2583-93.
77. Nandiyanto ABD, Hagura N, Iskandar F, Okuyama K. Design of a highly ordered and uniform porous structure with multisized pores in film and particle forms using a template-driven self-assembly technique. Acta Mater. 2010;58:282-9.
78. Iskandar F, Chang HW, Okuyama K. Preparation of microencapsulated powders by an aerosol spray method and their optical properties. Adv Powder Technol. 2003;14:349-67.
79. Gharsallaoui A, Roudaut GI, Chambin O, Voilley A, Saurel R. Applications of spray-drying in microencapsulation of food ingredients: an overview. Food Res Int. 2007;40:1107-21.
80. Vehring R. Pharmaceutical particle engineering via spray drying. Pharm Res. 2008;25:999-1022.