Nanowire development and characterization for applications in biosensing

Nanosystems Design and Technology

Volumn , Issue , 2009, Pages 143-173

  MacKenzie, Robert ^a   Auzelyte, Vaida ^b   Olliges, Sven ^a   Spolenak, Ralph ^a   Solak, Harun H ^b   Vörös, Janos ^a  

^a ETH ZURICH   (Switzerland)

^b PAUL SCHERRER INSTITUTE   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84879192723     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4419-0255-9_7     Document Type: Chapter

References (45)

1. Natelson D (2003) Fabrication of metal nanowires. In: Recent developments in vacuum science and technology. Research Signpost, Trivandrum, pp 157-183
2. Cumming DRS et al (1996) Fabrication of 3 nm wires using 100 keV electron beam lithography and poly(methyl methacrylate) resist. Appl Phys Lett 68(3):322-324
3. Melosh NA et al (2003) Ultrahigh-density nanowire lattices and circuits. Science 300(5616): 112-115
4. Chai J et al (2007) Assembly of aligned linear metallic patterns on silicon. Nat Nanotechnol 2(8):500-506
5. Banqiu W, Kumar A (2007) Extreme ultraviolet lithography: A review. J Vac Sci Technol B Microelectron Nanometer Struct 25(6):1743-1761
6. Gonsalves KE et al (2005) High performance resist for EUV lithography. Microelectron Eng 77(1):27-35
7. Petrillo K et al (2007) Are extreme ultraviolet resists ready for the 32 nm node? 51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication. A V S American Institute of Physics, Denver, CO
8. Solak HH (2006) Nanolithography with coherent extreme ultraviolet light. J Phys D Appl Phys 39(10):R171-R188
9. Solak HH et al (2007) Photon-beam lithography reaches 12.5 nm half-pitch resolution. J Vac Sci Technol B 25(1):91-95
10. Auzelyte V et al (2007) Large area arrays of metal nanowires. 33rd International Conference on Micro- and Nano-Engineering. Elsevier, Copenhagen, Denmark
11. Olliges S et al (2009) Thermomechanical properties of flexible substrate supported gold nanowires. Scr Mater 60(5):5-8
12. Olliges S et al (2007) Tensile strength of gold nanointerconnects without the influence of strain gradients. Acta Mater 55(15):5201-5210
13. Olliges S et al (2008) In-situ observation of cracks in gold nano-interconnects on flexible substrates. Scr Mater 58(3):175-178
14. Bohm J et al (2004) Tensile testing of ultrathin polycrystalline films: A synchrotron-based technique. Rev Sci Instrum 75(4):1110-1119
15. Eberl C et al (2004) Ultra high-cycle fatigue in pure Al thin films and line structures. Symposium on Internal Stress and Thermo-Mechanical Behavior in Multi-Component Materials Systems held at the TMS Annual Meeting. Elsevier, Charlotte, NC
16. Patterson BD et al (2005) The materials science beamline at the swiss light source: Design and realization. Nucl Instrum Methods Phys Res A 540(1):42-67
17. Schmitt B et al (2001) Mythen detector system. 10th International Workshop on Vertex Detectors. Elsevier, Brunnen, Switzerland
18. Schmitt B et al (2003) Development of single photon counting detectors at the Swiss Light Source. 9th Pisa Meeting on Advanced Detectors. Elsevier, La Biodola, Italy
19. Xia ZC, Hutchinson JW (2000) Crack patterns in thin films. J Mech Phys Solids 48(6-7): 1107-1131
20. Bohm J et al (2004) A new synchrotron-based technique for measuring stresses in ultrathin metallic films. Symposium on Nanoscale Materials andModeling held at the 2004 MRS Spring Meeting. Materials Research Society, San Francisco, CA
21. Wu B, Heidelberg A, Boland JJ (2005) Mechanical properties of ultrahigh-strength gold nanowires. Nat Mater 4(7):525-529
22. Noyan IC, Cohen JB (eds) (1987) Residual stress. Springer, New York
23. Xiang Y, Vlassak JJ (2005) Bauschinger effect in thin metal films. Scr Mater 53(2):177-182
24. Xiang Y, Vlassak JJ (2006) Bauschinger and size effects in thin-film plasticity. Acta Mater 54(20):5449-5460
25. Dundurs J, Bogy DB (1968) Edge-bonded dissimilar orthogonal elastic wedges under normal and shear loading. J Appl Mech 35:460-466
26. Beuth JL (1992) Cracking of thin bonded films in residual tension. Int J Solids Struct 29(13):1657-1675
27. Gruber P et al (2004) Size effect on crack formation in Cu/Ta and Ta/Cu/Ta thin film systems. Symposium on Nanoscale Materials and Modeling held at the 2004 MRS Spring Meeting. Materials Research Society, San Francisco, CA
28. Fleck NA et al (1994) Strain gradient plasticity - theory and experiment. Acta Metallurgica Et Materialia 42(2):475-487
29. Gao H et al (1999) Mechanism-based strain gradient plasticity - I. Theory. JMech Phys Solids 47(6):1239-1263
30. Gryaznov VG, Trusov LI (1993) Size effects in micromechanics of nanocrystals. Prog Mater Sci 37(4):289-401
31. Shen YF et al (2005) Tensile properties of copper with nano-scale twins. Scr Mater 52(10): 989-994
32. Courtney T (2000) Mechanical behavior of materials, 2nd edn. McGraw-Hill, New York
33. Gruber PA et al (2008) Temperature dependence of mechanical properties in ultrathin Au films with and without passivation. J Mater Res 23:2406-2419
34. Arzt E et al (1996) Physical metallurgy of electromigration: Failure mechanisms in miniaturized conductor lines. Zeitschrift für Metallkunde 87(11):934-942
35. Agrawal PM, Rice BM, Thompson DL (2002) Predicting trends in rate parameters for selfdiffusion on FCC metal surfaces. Surf Sci 515(1):21-35
36. MacKenzie R et al (2008) Electrochemical biosensors - Sensor principles and architectures. Sensors 8(3):1400-1458
37. Khanal DR et al (2007) Effects of quantum confinement on the doping limit of semiconductor nanowires. Nano Lett 7:1186-1190
38. Foley EL et al (1999) An undergraduate laboratory experiment on quantized conductance in nanocontacts. Am J Phys 67(5):389-393
39. Stadler B et al (2007) Nanopatterning of gold colloids for label-free biosensing. Nanotechnology 18(15):6
40. Maheshwari V, Kane JR, Saraf F (2008) Self-assembly of a micrometers-long one-dimensional network of cemented au nanoparticles. Adv Mater 20:284-287
41. Sannomiya T, Hafner C, Voros J (2008) In situ sensing of single binding events by localized surface plasmon resonance. Nano Lett 8(10):3450-3455
42. Stadler BM et al (2006) Light-induced in situ patterning of DNA-tagged biomolecules and nanoparticles. IEEE Trans Nanobiosci 5(3):215-219
43. Yu AA et al (2005) Supramolecular nanostamping: Using DNA as movable type. Nano Lett 5(6):1061-1064
44. Falconnet D et al (2004) A combined photolithographic and molecular-assembly approach to produce functional micropatterns for applications in the biosciences. Adv Funct Mater 14(8):749-756
45. Blech K et al (2008) In-situ electrical addressing of one-dimensional gold nanoparticle assemblies. J Nanosci Nanotechnol 8(1):461-465