Model and mechanism of miniaturized and stopband-enhanced interleaved EBG structure for power/ground noise suppression

IEEE Transactions on Electromagnetic Compatibility

Volumn 55, Issue 1, 2013, Pages 159-167

  Wang, Chuen De ^a   Wu, Tzong Lin ^a  

^a NATIONAL TAIWAN UNIVERSITY   (Taiwan)

Author keywords

Electromagnetic bandgap (EBG) structure; power integrity (PI); power ground (P G) noise; radiation emission

Indexed keywords

1-D MODELS; COMPACT SIZE; DESIGN CONCEPT; EBG STRUCTURE; ELECTROMAGNETIC BANDGAP STRUCTURES; EQUIVALENT CIRCUIT MODEL; LOWER AND UPPER BOUNDS; MEASURED RESULTS; MUSHROOM-LIKE EBG; NOISE SUPPRESSION; PHYSICAL MECHANISM; POWER DISTRIBUTION NETWORK; POWER INTEGRITY; POWER/GROUND (P/G) NOISE; RADIATION EMISSIONS; RELATIVE BANDWIDTH; STOPBAND; TRANSMISSION-LINE; WIDE STOPBAND;

CUTOFF FREQUENCY; METAMATERIALS;

BANDWIDTH;

EID: 84873988002     PISSN: 00189375     EISSN: None     Source Type: Journal    
DOI: 10.1109/TEMC.2012.2210900     Document Type: Article

References (35)

1. T.-L. Wu, H.-H. Chuang, and T.-K. Wang, "Overview of power integrity solutions on package and PCB: Decoupling and EBG isolation," IEEE Trans. Electromagn. Compat., vol. 52, no. 2, pp. 346-356, May 2010.
2. M. Swaminathan, J. Kim, I. Novak, and J. P. Libous, "Power distribution networks for system-on-package: Status and challenges," IEEE Trans. Adv. Packag., vol. 27, no. 2, pp. 286-300, May 2004.
3. M. Swaminathan and E. Engin, Power Integrity Modeling and Design for Semiconductors and Systems. Englewood Cliffs, NJ: Prentice-Hall, 2008.
4. C.-Y. Hsieh, C.-D. Wang, K.-Y. Lin, and T.-L. Wu, "A power bus with multiple via ground surface perturbation lattices for broadband noise isolation: Modeling and application in RF-SiP," IEEE Trans. Adv. Packag., vol. 33, no. 3, pp. 582-591, Aug. 2010.
5. J. Fan, M. Cocchini, B. Archambeault, J. L. Knighten, J. L. Drewniak, and S. Conner, "Noise coupling between signal and power/ground nets due to signal vias transitioning through power/ground plane pair," presented at the IEEE Int. Symp. Electromagn. Compat., Detroit, MI, Aug. 2008.
6. T. Sudo, H. Sasaki, N. Masuda, and J. L. Drewniak, "Electromagnetic interference (EMI) of system-on-package (SOP)," IEEE Trans. Adv. Packag., vol. 27, no. 2, pp. 304-314, May 2004.
7. T.-L. Wu, S.-T. Chen, J.-N. Huang, and Y.-H. Lin, "Numerical and experimental investigation of radiation caused by the switching noise on the partitioned DC reference planes of high speed digital PCB," IEEE Trans. Electromagn. Compat, vol. 46, no. 1, pp. 33-45, Feb. 2004.
8. J. Fan, J. L. Drewniak, J. L. Knighten, N. W. Smith, A. Orlandi, T. P. Van Doren, T. H. Hubing, and R. E. DuBroff, "Quantifying SMT decoupling capacitor placement in DC power-bus design for multilayer PCBs," IEEE Trans. Electromagn. Compat., vol. 43, no. 4, pp. 588-599, Nov. 2001.
9. J. Fan, W. Cui, J. L. Drewniak, T. P. Van Doren, and J. L. Knighten, "Estimating the noise mitigation effect of local decoupling in printed circuit boards," IEEE Trans. Adv. Packag., vol. 25, no. 2, pp. 154-165, May 2002.
10. T.-L. Wu, J. Fan, F. de Paulis, C.-D. Wang, A. Ciccomancini, and A. Orlandi, "Mitigation of noise coupling in multilayer high-speed PCB: State of the art modeling methodology and EBG technology," IEICE Trans. Commun., vol. E93-B, no. 7, pp. 1678-1689, Jul. 2010.
11. T.-L. Wu and S.-T. Chen, "A photonic crystal power/ground layer for eliminating simultaneously switching noise in high-speed circuit," IEEE Trans. Microw. Theory Tech., vol. 54, no. 8, pp. 3398-3406, Aug. 2006.
12. G.-Z. Wu, Y.-C. Chen, and T.-L. Wu, "Design and implementation of a novel hybrid photonic crystal power/ground layer for broadband power noise suppression," IEEE Trans. Adv. Packag., vol. 33, no. 1, pp. 206-211, Feb. 2010.
13. A. C. Scogna, T.-L. Wu, and A. Orlandi, "Noise coupling mitigation in PWR/GND plane pair by means of photonic crystal fence: Sensitivity analysis and design parameters extraction," IEEE Trans. Adv. Packag., vol. 33, no. 3, pp. 574-581, Aug. 2010.
14. T.-L. Wu, Y.-H. Lin, and S.-T. Chen, "A novel power planes with low radiation and broadband suppression of ground bounce noise using photonic bandgap structures," IEEE Microw. Wirel. Compon. Lett., vol. 14, no. 7, pp. 337-339, Jul. 2004.
15. T.-L. Wu, Y.-H. Lin, T.-K. Wang, C.-C. Wang, and S.-T. Chen, "Electromagnetic bandgap power/ground planes for wideband suppression of ground bounce noise and radiated emission in high-speed circuits," IEEE Trans. Microw. Theory Tech., vol. 53, no. 9, pp. 2935-2942, Sep. 2005.
16. J. Choi, V. Govind, and M. Swaminathan, "A novel electromagnetic bandgap (EBG) structure for mixed-signal system applications," in Proc. IEEE Radio Wireless Conf., Atlanta, GA, Sep. 2004, pp. 243-246.
17. T.-L. Wu, Y.-H. Lin, and S.-T. Chen, "A novel power plane with superwideband elimination of ground bounce noise on high speed circuits," IEEE Microw. Wireless Compon. Lett., vol. 15, no. 3, pp. 174-176, Mar. 2005.
18. F. de Paulis, L. Raimondo, and A. Orlandi, "Impact of shorting vias placement on embedded planar electromagnetic bandgap structures within multilayer printed circuit boards," IEEE Trans. Microw. Theory Tech., vol. 58, no. 7, pp. 1867-1876, Jul. 2010.
19. L. Raimondo, F. de Paulis, and A. Orlandi, "A simple and efficient design procedure for planar electromagnetic band-gap structures on printed circuit boards," IEEE Trans. Electromagn. Compat., vol. 53, no. 2, pp. 482-490, May 2011.
20. F. de Paulis and A. Orlandi, "Accurate and efficient analysis of planar electromagnetic band-gap structures for power bus noise mitigation in the GHz band," Prog. Electromagn. Res. B, vol. 37, pp. 59-80, 2012.
21. R. Abhari and G. V. Eleftheriades, "Metallo-dielectric electromagnetic bandgap structures for suppression and isolation of the parallel-plate noise in high-speed circuits," IEEE Trans. Microw. Theory Tech., vol. 51, no. 6, pp. 1629-1639, Jun. 2003.
22. T. Kamgaing and O. M. Ramahi, "A novel power plane with integrated simultaneous switching noise mitigation capability using high impedance surface," IEEE Microw. Wireless Compon. Lett., vol. 13, no. 1, pp. 21-23, Jan. 2003.
23. S. D. Rogers, "Electromagnetic-bandgap layers for broad-band suppression of TEM modes in power planes," IEEE Trans Microw. Theory Tech., vol. 53, no. 8, pp. 2495-2505, Aug. 2005.
24. F. de Paulis, L. Raimondo, and A. Orlandi, "IR-DROP analysis and thermal assessment of planar electromagnetic bandgap structures for power integrity applications," IEEE Trans. Adv. Packag., vol. 33, no. 3, pp. 617-622, Aug. 2010.
25. S. Shahparnia and O. M. Ramahi, "Simultaneous switching noise mitigation in PCB using cascaded high-impedance surfaces," Electron. Lett., vol. 40, no. 2, pp. 98-100, Jan. 2004.
26. J. Park, A. C. W. Lu, K. M. Chua, L. L. Wai, J. Lee, and J. Kim, "Double-stacked EBG structure for wideband suppression of simultaneous switching noise in LTCC-based SiP applications," IEEE Microw. Wirel. Compon. Lett., vol. 16, no. 9, pp. 481-483, Sep. 2006.
27. T. Kamgaing and O. M. Ramahi, "Design and modeling of high impedance electromagnetic surfaces for switching noise suppression in power planes," IEEE Trans. Electromagn. Compat., vol. 47, no. 3, pp. 479-489, Aug. 2005.
28. C.-L. Wang, G.-H. Shiue, W.-D. Guo, and R.-B. Wu, "A systematic design to suppress wideband ground bounce noise in high-speed circuits by electromagnetic-bandgap-enhanced split powers," IEEE Trans. Microw. Theory Tech., vol. 54, no. 12, pp. 4209-4217, Dec. 2006.
29. J. Lee, H. Kim, and J. Kim, "High dielectric constant thin film EBG power/ground network for broad-band suppression of SSN and radiated emissions," IEEE Microw. Wirel. Compon. Lett., vol. 15, no. 8, pp. 505-507, Aug. 2005.
30. J.-S. Hong and M. J. Lancaster, Microstrip Filters for RF/Microwave Applications. New York: Wiley, 2001.
31. D. M. Pozar, Microwave Engineering, 2nd ed. New York: Wiley, 1998.
32. Standard for Validation of Computational Electromagnetics Computer Modeling and Simulation-Part 1, 2, IEEE Standard P1597, 2008.
33. A. P. Duffy, A. J. M. Martin, A. Orlandi, G. Antonini, T. M. Benson, and M. S. Woolfson, "Feature selective validation (FSV) for validation of computational electromagnetics (CEM): Part I. The FSV method," IEEE Trans. Electromagn. Compat, vol. 48, no. 3, pp. 449-459, Aug. 2006.
34. A. Orlandi, A. P. Duffy, B. Archambeault, G. Antonini, D. E. Coleby, and S. Connor, "Feature selective validation (FSV) for validation of computational electromagnetics (CEM): Part II. Assessment of FSV performance," IEEE Trans. Electromagn. Compat, vol. 48, no. 3, pp. 460-467, Aug. 2006.
35. S. Shahparnia and O. M. Ramahi, "Electromagnetic interference (EMI) reduction from printed circuit boards (PCB) using electromagnetic bandgap structures," IEEE Trans. Electromagn. Compat., vol. 46, no. 4, pp. 580-587, Nov. 2004.