Numerical simulation of hot imprint process of periodical lamellar microstructure in to polycarbonate

Progress in Biomedical Optics and Imaging - Proceedings of SPIE

Volumn 8248, Issue , 2012, Pages

  Gaidys, Rimvydas ^a   Narijauskaitë, Birute ^a   Paleviçius, Arvydas ^a   Januşas, Giedrius ^a  

^a KAUNAS UNIVERSITY OF TECHNOLOGY   (Lithuania)

Author keywords

Elasto plastic; Finite element method; Hot imprint; Periodical lamellar microstructure

Indexed keywords

DEMOLDING; ELASTO-PLASTIC; ELASTOPLASTIC MATERIALS; FINITE ELEMENT MODELS; FORMATION MECHANISM; GLASSING TEMPERATURES; HOT IMPRINT; LAMELLAR MICROSTRUCTURE; NUMERICAL RESULTS; OPTIMAL PROCESSING; SIMULATION MODEL;

COMPOSITE MICROMECHANICS; FINITE ELEMENT METHOD; MICROANALYSIS; MICROFABRICATION; MICROMACHINING; MICROSTRUCTURE; POLYCARBONATES;

COMPUTER SIMULATION;

EID: 84858960192     PISSN: 16057422     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.915107     Document Type: Conference Paper

References (26)

1. Becker, H. and Heim, U., "Hot embossing as a method for the fabrication of polymer high aspect ratio structures," Sens. Actuat. A: Physic. 83, 130-135 (2000).
2. Danielyte, J., Gaidys, R., "Numerical simulation of tooth mobility using nonlinear model of the periodontal ligament," Mechanika 3(71), 20-26 (2008).
3. Daukşeviçius, R., Ostaşeviçius, V., Gaidys, R., "Finite element modeling and simulation of squeezed-film effects in a vibrating MEMS structure," Solid State Phenomena Mechatronics Systems and Materials III 147- 149, 314-319 (2009).
4. Day, A. J., Allport, J. M., Fischer, W. P., Coates, P. D. and Mimaroglu, A. "Finite element modeling of Polymer Deformation Process," ABAQUS User's Conference, 151-163 (1993).
5. Heckele, M. and Schomburg, W. K., "Review on micro molding of thermoplastic polymers," Micromech. Microeng. 14(3), R1-R14 (2004).
6. Jin, P., Gao, Y., Liu, T., Tan, J., Wang, Z. and Zhou, H., "Simulation and experimental study on recovery of polymer during hot embossing," Jpn. Soc. Appl. Physics 48, 06FH10-1 - 06FH10-4 (2009).
7. Janusas, G., Palevicius, A., Bendikiene, R. and Palevicius, P., "Investigation of periodical microstructures using coherent radiation," Proc. SPIE Metrology, inspection, and process control for microlithography XXIV 7638 (2), 76383Q-1-10 (2010).
8. Kiew, C. M., Lin, W. J., Teo, T. J., Tan, J. L., Lin, W. and Yang, G., "Finite element analysis of PMMA pattern formation during hot embossing process," IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM, 314-319 (2009).
9. Krishnaswamy, P., Tuttle, M. E. and Emery, A. F., "Finite Element Modeling of the Time-Dependent Behavior of Nonlinear Ductile Polymers," Polym. Engin. Sci. 32(16), 1086-1096 (1992).
10. Krishnaswamy, P., Tuttle, M. E. and Emery, A. F., "Finite Element Modeling of the Crack Tip Behavior in Viscoelasic materials, Part1: Linear Behaviour," Int. J. Numer. Method Eng. 30, 371-387 (1990). (Pubitemid 20721982)
11. Lan, S., Lee, H. J., Lee, S. H., Ni, J., Lai, X., Lee, H. W., Song, J. H. and Lee, M. G., "Experimental and numerical study on the viscoelastic property of polycarbonate near glass transition temperature for micro thermal imprint process," Mater. design 30, 3879-3884 (2009).
12. Lin, C. R., Chen, R. H. and Hung, C., "The Characterization and Finite-Element Analysis of a Polymer under Hot Pressing," Int. J. Adv. Manuf. Technol. 20, 230-235 (2002). (Pubitemid 34964546)
13. Narijauskaite, B., Paleviçius, A., Narmontas, P., Ragulskis, M. and Januşas, G., "High-frequency excitation for thermal imprint of microstructures into a polymer," Experimental Techniques 35(2), 1-7 (2011).
14. Nicoli M. A., "A Thermo-mechanical finite deformation theory of plasticity for amorphous polymers: application to micro-hot-embossing of polymethyl methacrylate," Phd thesis, MIT (2007).
15. Quake, S. R. and Scherer, A., "From micro- to nanofabrication with soft materials," Science 290, 1536-1540 (2000).
16. Paleviçius, A. and Januşas, G., "Analysis of periodical microstructures using optical methods," Proc. ICMIE, 40-44 (2011).
17. Reiter, J. and Pierer, R., "Thermo-mechanical simulation of a laboratory test to determine mechanical properties of steel near the solidus temperature," Excerpt from the Proceedings of the COMSOL Multiphysics User's Conference. Frankfurt (2005).
18. Ress, D. W. A., [Basic engineering plasticity: An Introduction with engineering and manufacturing applications], Boston, MA:Elsevier, 68 (2006).
19. Saunoriene, L., Ragulskis, M., Paleviçius, A., Ostaşeviçius, V. and Januşas, G., "Hybrid numericalexperimental moire technique for analysis of microstructures," Proc. SPIE 6345, 1-8 (2006).
20. Tamuleviçius, S., Guobiene, A., Januşas, G., Paleviçius, A., Ostaşeviçius, V. and Andruleviçius, M., "Optical characterization of diffractive optical elements replicated in polymers," Microlith., Microfab. Microsyst. 5(1), 013004-1-013004-6 (2006).
21. Tamuleviçius, T., Tamuleviçius, S., Andruleviçius, M., Januşas, G., Ostaşeviçius, V. and Paleviçius, A., "Optical characterization of microstructures of high aspect ratio," Proc. SPIE 6518(3), 1-9 (2007).
22. Worgull, M., Heckele, M., Hetu, J.-F. and Kabanemi, K. K., "Modeling and optimization of the hot embossing process for micro- and nanocomponent fabrication," Microlith. Microfab. Microsyst. 5, 011005 (2006).
23. Wriggers, P., [Computational Contact Mechanics], Springer, 126 (2006).
24. Yoshihiko, H., Masaki, F., Takahiro, O., Yoshio, T., Masataka, E., Sigo, I., Kazuo, N. and Masaru, S., "Study of the resist deformation in nanoimprint lithography," J. Vac. Sci. Technol. B 19(6), 2811-2815 (2001).
25. Yoshihiko, H., Takaaki, K. and Takashi, Y., "Simulation and experimental study of polymer deformation in nanoimprint lithography," J. Vac. Sci. Technol. B 22(6), 3288-3293 (2004).
26. Yoshihiko, H., Yoshida, S. and Nobuyuki, T., "Defect analysis in thermal nanoimprint lithography," J. Vac. Sci. Technol. B 21(6), 2765-2770 (2003).