A Review and perspective on surveillance of Bernoulli processes

Quality and Reliability Engineering International

Volumn 27, Issue 6, 2011, Pages 735-752

  Szarka III, John L ^a   Woodall, William H ^b  

^a W L GORE AND ASSOCIATES   (United States)

^b VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

cumulative count of conforming chart; geometric CUSUM chart; high quality process; normal transformation; Shewhart p chart

Indexed keywords

CUMULATIVE COUNT OF CONFORMING CHART; CUSUM CHART; HIGH QUALITY; NORMAL TRANSFORMATION; SHEWHART;

STATISTICAL PROCESS CONTROL;

EID: 80052924393     PISSN: 07488017     EISSN: 10991638     Source Type: Journal    
DOI: 10.1002/qre.1256     Document Type: Review

References (112)

1. Woodall WH,. Control charts based on attribute data: bibliography and review. Journal of Quality Technology 1997; 29 (2): 172-183.
2. Topalidou E, Psarakis S,. Review of multinomial and multiattribute quality control charts. Quality and Reliability Engineering International 2009; 25 (7): 773-804.
3. Duran RI, Albin SL,. Monitoring a fraction with easy and reliable settings of the false alarm rate. Quality and Reliability Engineering International 2009; 25 (8): 1029-1043.
4. Steiner SH, MacKay RJ,. Effective monitoring of processes with parts per million defective. Frontiers in Statistical Quality Control 7, HJ Lenz, PT Wilrich, (eds). Physica-Verlag: Heidelberg, Germany, 2004; 140-149.
5. Goh TN, Xie M,. New approach to quality in a near-zero defect environment. Total Quality Management 1994; 5 (3): 3-10.
6. Calvin TW,. Quality control techniques for 'zero defects'. IEEE Transactions on Components, Hybrids, and Manufacturing Technology 1983; CHMT-6 (3): 323-328.
7. Bourke PD,. Detecting a shift in fraction nonconforming using run-length control charts with 100% inspection. Journal of Quality Technology 1991; 23 (3): 225-238.
8. Moustakides GV,. Optimal stopping times for detecting changes in distributions. The Annals of Statistics 1986; 14 (4): 1379-1387.
9. Hawkins DM, Olwell DH,. Cumulative Sum Charts and Charting for Quality Improvement. Springer: New York, NY, 1998.
10. Chang TC, Gan FF,. Cumulative sum charts for high yield processes. Statistica Sinica 2001; 11 (3): 791-805. (Pubitemid 33669775)
11. Yang Z, Xie M, Kuralmani V, Tsui KL,. On the performance of geometric charts with estimated control limits. Journal of Quality Technology 2002; 34 (4): 448-458.
12. Tang LC, Cheong WT,. Cumulative conformance count chart with sequentially updated parameters. IIE Transactions 2004; 36 (9): 841-853.
13. Zhang M, Peng Y, Schuh A, Megahed F, Woodall WH,. A reconsideration of geometric charts with estimated control limits. Submitted for Publication, 2011.
14. Lee J, Wang N, Xu L, Schuh A, Woodall WH,. The effect of parameter estimation on upper-sided Bernoulli CUSUM charts. Submitted for Publication 2011.
15. Reynolds Jr MR, Stoumbos ZG,. A CUSUM chart for monitoring a proportion when inspecting continuously. Journal of Quality Technology 1999; 31 (1): 87-108.
16. Goh TN,. A control chart for very high yield processes. Quality Assurance 1987; 13 (1): 18-22. (Pubitemid 17587049)
17. Xie W, Xie M, Goh TN,. A Shewhart-like charting technique for high yield processes. Quality and Reliability Engineering International 1995; 11 (3): 189-196.
18. Xie M, Goh TN,. The use of probability limits for process control based on geometric distribution. International Journal of Quality and Reliability Management 1997; 14 (1): 64-73. (Pubitemid 127027747)
19. Xie M, Goh TN, Kuralmani V,. On optimal setting of control limits for geometric chart. International Journal of Reliability, Quality and Safety Engineering 2000; 7 (1): 17-25.
20. Chen JT,. A new approach to setting control limits of cumulative count of conforming charts for high-yield processes. Quality and Reliability Engineering International 2009; 25 (8): 973-986.
21. Zhang L, Govindaraju K, Bebbington M, Lai CD,. On the statistical design of geometric control charts. Quality Technology and Quantitative Management 2004; 1 (2): 233-243.
22. Lucas JM,. Control schemes for low count levels. Journal of Quality Technology 1989; 21 (3): 199-201.
23. Kuralmani V, Xie M, Goh TN, Gan FF,. A conditional decision procedure for high yield processes. IIE Transactions 2002; 34 (12): 1021-1030. (Pubitemid 35186200)
24. Champ CW, Woodall WH,. Exact results for Shewhart control charts with supplementary runs rules. Technometrics 1987; 29 (4): 393-399.
25. Chan LY, Xie M, Goh TN,. Two-stage control charts for high yield processes. International Journal of Reliability, Quality and Safety Engineering 1997; 4 (2): 149-165.
26. Chan LY, Lai CD, Xie M, Goh TN,. A two-stage decision procedure for monitoring processes with low fraction nonconforming. European Journal of Operational Research 2003; 150 (2): 420-436.
27. Noorossana R, Saghaei A, Paynabar K, Samimi Y,. On the conditional procedure for high yield processes. Computers and Industrial Engineering 2007; 53 (3): 469-477. (Pubitemid 47495976)
28. Cheng CS, Chen PW,. The design of cumulative count of conforming chart with supplementary runs rules. Proceedings of the 9th Asia Pacific Industrial Engineering and Management Systems Conference, 2008; 204-209.
29. Ranjan P, Xie M, Goh TN,. Optimal control limits for CCC charts in the presence of inspection errors. Quality and Reliability Engineering International 2003; 19 (2): 149-160.
30. Lai CD, Govindaraju K, Xie M,. Effects of correlation on fraction nonconforming statistical process control procedures. Journal of Applied Statistics 1998; 25 (4): 535-543. (Pubitemid 128501330)
31. Lai CD, Xie M, Govindaraju K,. Study of a Markov model for a high-quality dependent process. Journal of Applied Statistics 2000; 27 (4): 461-473.
32. Liu J, Xie M, Goh TN, Liu QH, Yang ZH,. Cumulative count of conforming chart with variable sampling intervals. International Journal of Production Economics 2006; 101 (2): 286-297. (Pubitemid 43177616)
33. Chen YK, Chiou KC, Chen CY,. A Markov chain approximation for ATS modeling for the VSI CCC control chart. Proceedings of World Academy of Science, Engineering and Technology 2009; 41: 105-108.
34. Wu Z, Spedding TA,. Evaluation of ATS for CRL control chart. Process Control and Quality 1999; 11 (3): 183-191.
35. Kaminsky FC, Benneyan JC, Davis RD, Burke RJ,. Statistical control charts based on a geometric distribution. Journal of Quality Technology 1992; 24 (2): 63-69.
36. Benneyan JC,. Number-between g-type statistical quality control charts for monitoring adverse events. Health Care Management Science 2001; 4 (4): 305-318. (Pubitemid 33750659)
37. Benneyan JC,. Performance of number-between g-type statistical control charts for monitoring adverse events. Health Care Management Science 2001; 4 (4): 319-336. (Pubitemid 33750660)
38. Xie M, Goh TN, Tang XY,. Data transformation for geometrically distributed quality characteristics. Quality and Reliability Engineering International 2000; 16 (1): 9-15.
39. Xie M, Lu XS, Goh TN, Chan LY,. A quality monitoring and decision-making scheme for automated production processes. International Journal of Quality and Reliability Management 1999; 16 (2): 148-157.
40. Wu Z, Zhang X, Yeo SH,. Design of the sum-of-conforming-run-length control charts. European Journal of Operational Research 2001; 132 (1): 187-196. (Pubitemid 32288121)
41. Wu Z, Yeo SH, Fan H,. A comparative study of the CRL-type control charts. Quality and Reliability Engineering International 2000; 16 (4): 269-279.
42. Schwertman NC,. Designing accurate control charts based on the geometric and negative binomial distributions. Quality and Reliability Engineering International 2005; 21 (8): 743-756. (Pubitemid 41766862)
43. Di Bucchianico A, Mooiweer GD, Moonen EJ,. Monitoring infrequent failures of high-volume production processes. Quality and Reliability Engineering International 2005; 21 (5): 521-528. (Pubitemid 41118438)
44. Lai CD, Govindaraju K,. Reduction of control-chart signal variability for high-quality processes. Journal of Applied Statistics 2008; 35 (6): 671-679.
45. Ohta H, Kusukawa E, Rahim A,. A CCC-r chart for high-yield processes. Quality and Reliability Engineering International 2001; 17 (6): 439-446.
46. Xie M, Tang XY, Goh TN,. On economic design of cumulative count of conforming chart. International Journal of Production Economics 2001; 72 (1): 89-97. (Pubitemid 32544411)
47. Albers W,. The optimal choice of negative binomial charts for monitoring high-quality processes. Journal of Statistical Planning and Inference 2010; 140: 214-225.
48. 2 chart versus the np chart for detecting upward shifts in fraction defective. Journal of Applied Statistics 2006; 33 (1): 1-15. (Pubitemid 43135394)
49. Ohta H, Kusukawa E,. An application of confirmation sample control chart to the high-yield processes and its economic design. Frontiers in Statistical Quality Control 7, HJ Lenz, PT Wilrich, (eds). Physica-Verlag: Heidelberg, Germany, 2004; 101-118.
50. Xie M, Goh TN, Kuralmani V,. Statistical Models and Control Charts for High Quality Processes. Kluwer: Boston, MA, 2002.
51. Xie M, Goh TN, Lu XS,. A comparative study of CCC and CUSUM charts. Quality and Reliability Engineering International 1998; 14 (5): 339-345. (Pubitemid 128608904)
52. Montgomery DC,. Introduction to Statistical Quality Control 6th Edn. Wiley: Hoboken, NJ, 2009.
53. Woodall WH, Adams BM,. The statistical design of CUSUM charts. Quality Engineering 1993; 5 (4): 559-570.
54. Bourke PD,. The geometric CUSUM chart with sampling inspection for monitoring fraction defective. Journal of Applied Statistics 2001; 28 (8): 951-972.
55. Sun J, Zhang G,. Control charts based on the number of consecutive conforming items between two successive nonconforming items for the near zero nonconformity processes. Total Quality Management 2000; 11 (2): 235-250.
56. Gan FF,. An optimal design of CUSUM control charts for binomial counts. Journal of Applied Statistics 1993; 20 (4): 445-460.
57. Wu Z, Jiao J, Liu Y,. A binomial CUSUM chart for detecting large shifts in fraction nonconforming. Journal of Applied Statistics 2008; 35 (11): 1267-1276.
58. Reynolds Jr MR, Stoumbos ZG,. The SPRT chart for monitoring a proportion. IIE Transactions 1998; 30 (6): 545-561. (Pubitemid 128728839)
59. Bourke PD,. Sample size and the binomial CUSUM control chart: The case of 100% inspection. Metrika 2001; 53 (1): 51-70.
60. Megahed FM, Kensler JLK, Bedair K, Woodall WH,. A note on the ARL of two-sided Bernoulli-based CUSUM control charts. Journal of Quality Technology 2011; 43 (1): 43-49.
61. Reynolds Jr MR, Stoumbos ZG,. A general approach to modeling CUSUM charts for a proportion. IIE Transactions 2000; 32 (6): 515-535. (Pubitemid 30576057)
62. Joner Jr MD, Woodall WH, Reynolds Jr MR,. Detecting a rate increase using a Bernoulli scan statistic. Statistics in Medicine 2008; 27 (14): 2555-2575. (Pubitemid 351982692)
63. Sego LH, Woodall WH, Reynolds Jr MR,. A comparison of surveillance methods for small incidence rates. Statistics in Medicine 2008; 27 (8): 1225-1247. (Pubitemid 351395452)
64. Mousavi S, Reynolds Jr MR,. A CUSUM chart for monitoring a proportion with autocorrelated binary observations. Journal of Quality Technology 2009; 41 (4): 401-414.
65. Szarka III JL, Woodall WH,. On the equivalence of the Bernoulli and geometric CUSUM charts. Journal of Quality Technology 2012.
66. Woodall WH, Mahmoud MA,. The inertial properties of quality control charts. Technometrics 2005; 47 (4): 425-436. (Pubitemid 41640375)
67. Crowder SV, Hamilton MD,. An EWMA for monitoring a process standard deviation. Journal of Quality Technology 1992; 24 (1): 225-238.
68. McCool JI, Joyner-Motley T,. Control charts applicable when the fraction nonconforming is small. Journal of Quality Technology 1998; 30 (3): 240-247. (Pubitemid 128574022)
69. Kotani T, Kusukawa E, Ohta H,. Exponentially weighted moving average chart for high-yield processes. Industrial Engineering and Management Systems 2005; 4 (1): 75-81.
70. Yeh AB, McGrath RN, Sembower MA, Shen Q,. EWMA control charts for monitoring high-yield processes based on non-transformed observations. International Journal of Production Research 2008; 46 (20): 5679-5699.
71. Spliid H,. An exponentially weighted moving average control chart for Bernoulli data. Quality and Reliability Engineering International 2010; 26 (1): 97-113.
72. Weiss CH, Atzmuller M,. EWMA control charts for monitoring binary processes with applications to medical diagnosis data. Quality and Reliability Engineering International 2010; 26 (8): 795-805.
73. Glushkovsky EA,. On-line g-control chart for attribute data. Quality and Reliability Engineering International 1994; 10 (3): 217-227.
74. Nelson LS,. A control chart for parts-per-million nonconforming items. Journal of Quality Technology 1994; 26 (3): 239-240.
75. Quesenberry CP,. Geometric Q charts for high quality processes. Journal of Quality Technology 1995; 27 (4): 304-315.
76. Quesenberry CP,. Statistical process control geometric Q-chart for nosocomial infection surveillance. American Journal of Infection Control 2000; 28 (4): 314-320. (Pubitemid 30626805)
77. Yun M, Youlin Z,. Q control charts for negative binomial distribution. Computers and Industrial Engineering 1996; 31 (3/4): 813-816.
78. Ryan TP,. Statistical Methods for Quality Improvement 2nd Edn. Wiley: New York, NY, 2000.
79. Lucas JM, Davis DJ, Saniga EM,. Detecting improvement using Shewhart attribute control charts when the lower control limit is zero. IIE Transactions 2006; 38 (8): 699-709. (Pubitemid 43820947)
80. Acosta-Mejia CA,. Improved p charts to monitor process quality. IIE Transactions 1999; 31 (6): 509-516.
81. Goh TN,. A charting technique for control of low-defective production. International Journal of Quality and Reliability Management 1987; 4 (1): 53-62.
82. Goh TN, Xie M,. Statistical control of a six sigma process. Quality Engineering 2003; 15 (4): 587-592.
83. Ryan TP, Schwertman NC,. Optimal limits for attributes control charts. Journal of Quality Technology 1997; 29 (1): 86-98. (Pubitemid 127617641)
84. Xie M, Goh TN,. Improvement detection by control charts for high yield processes. International Journal of Quality and Reliability Management 1993; 10 (7): 24-31.
85. Schwertman NC, Ryan TP,. Implementing optimal attributes control charts. Journal of Quality Technology 1997; 29 (1): 99-104.
86. Schwertman NC, Ryan TP,. Using dual np-charts to detect changes. Quality and Reliability Engineering International 1999; 15 (4): 317-320.
87. Chen G,. An improved p chart through simple adjustments. Journal of Quality Technology 1998; 30 (2): 142-151. (Pubitemid 128574013)
88. Wang H,. Comparison of p control charts for low defective rate. Computational Statistics and Data Analysis 2009; 53 (12): 4210-4220.
89. Xie M, Goh TN,. Some procedures for decision making in controlling high yield processes. Quality and Reliability Engineering International 1992; 8 (4): 355-360. (Pubitemid 23559149)
90. Chang TC, Gan FF,. Modified Shewhart charts for high yield processes. Journal of Applied Statistics 2007; 34 (7): 857-877.
91. Nelson LS,. Supplementary runs tests for np control charts. Journal of Quality Technology 1997; 29 (2): 225-227.
92. Tang LC, Cheong WT,. A control scheme for high-yield correlated production under group inspection. Journal of Quality Technology 2006; 38 (1): 45-55.
93. Wu Z, Yeo SH, Spedding TA,. A synthetic control chart for detecting fraction nonconforming increases. Journal of Quality Technology 2001; 33 (1): 104-111. (Pubitemid 33722669)
94. Bourke PD,. Performance comparisons for the synthetic control chart for detecting increases in fraction nonconforming. Journal of Quality Technology 2008; 40 (4): 461-475.
95. Davis RB, Woodall WH,. Evaluating and improving the synthetic control chart. Journal of Quality Technology 2002; 34 (2): 200-208.
96. Gadre MP, Rattihalli RN,. Unit and group-runs chart to identify increases in fraction nonconforming. Journal of Quality Technology 2005; 37 (3): 199-209. (Pubitemid 41013211)
97. Wu Z, Jiao JX,. Evaluating and improving the unit and group-runs chart. Journal of Quality Technology 2007; 39 (4): 355-363. (Pubitemid 47585874)
98. Vaughan TS,. Variable sampling interval np process control chart. Communications in Statistics-Theory and Methods 1993; 22 (1): 147-167.
99. Wu Z, Luo H,. Optimal design of the adaptive sample size and sampling interval np control chart. Quality and Reliability Engineering International 2004; 20 (6): 553-570.
100. Rendtel U,. CUSUM-schemes with variable sampling intervals and sample sizes. Statistical Papers 1990; 31 (1): 103-118.
101. Khoo MBC,. A moving average control chart for monitoring the fraction non-conforming. Quality and Reliability Engineering International 2004; 20 (6): 617-635.
102. Wu Z, Luo H, Zhang X,. Optimal np control chart with curtailment. European Journal of Operational Research 2006; 174 (2): 1723-1741. (Pubitemid 44176275)
103. Weiss CH,. Group inspection of dependent binary processes. Quality and Reliability Engineering International 2009; 25 (2): 151-165.
104. Jensen WA, Jones-Farmer LA, Champ CW, Woodall WH,. Effects of parameter estimation on control chart properties: A literature review. Journal of Quality Technology 2006; 38 (4): 349-364. (Pubitemid 44598821)
105. Pettitt AN,. A simple cumulative sum type statistic for the change-point problem with zero-one observations. Biometrika 1980; 67 (1): 79-84. (Pubitemid 10111076)
106. Worsley KJ,. The power of likelihood ratio and cumulative sum tests for a change in binomial probability. Biometrika 1983; 70 (2): 455-464.
107. Wallenstein S, Naus J, Glaz J,. Power of the scan statistic in detecting a changed segment in a Bernoulli sequence. Biometrika 1994; 81 (3): 595-601.
108. Balakrishnan N, Brito MR, Quiroz AJ,. Using large order statistics of runs for tracking a changing Bernoulli probability. Communications in Statistics-Theory and Methods 2002; 31 (5): 719-732.
109. Borror CM, Champ CW,. Phase I control charts for independent Bernoulli data. Quality and Reliability Engineering International 2001; 17 (5): 391-396.
110. Noorossana R, Saghaei A, Paynabar K, Abdi S,. Identifying the period of a step change in high-yield processes. Quality and Reliability Engineering International 2009; 25 (7): 875-883.
111. Ryan AG, Wells LJ, Woodall WH,. Methods for monitoring multiple proportions when inspecting continuously. Journal of Quality Technology 2011; 43 (3): 237-248.
112. Steiner SH, Cook RJ, Farewell VT, Treasure T,. Monitoring surgical performance using risk-adjusted cumulative sum charts. Biostatistics 2000; 1 (4): 441-452. (Pubitemid 33213547)