Influence of plasticizer type and level on the properties of Eudragit® S100 matrix pellets prepared by hot-melt extrusion

Journal of Microencapsulation

Volumn 27, Issue 6, 2010, Pages 521-532

  Schilling, Sandra U ^a,b   Lirola, Hélène L ^a   Shah, Navnit H ^c   Waseem Malick, A ^c   McGinity, James W ^a  

^a UNIVERSITY OF TEXAS AT AUSTIN   (United States)

^b MERCK KGAA   (Germany)

^c HOFFMANN LA ROCHE INC   (United States)

Author keywords

Controlled release; Enteric pellets; Eudragit S100; Hot melt extrusion; Plasticizer

Indexed keywords

CITRIC ACID TRIETHYL ESTER; EUDRAGIT; MACROGOL 8000; METHYL PARABEN; THEOPHYLLINE;

ARTICLE; DISSOLUTION; DRUG RELEASE; HEAT; MATRIX TABLET; MELTING POINT; PELLET EXTRUSION; PH MEASUREMENT; TENSILE STRENGTH; X RAY DIFFRACTION;

ACRYLIC RESINS; CALORIMETRY, DIFFERENTIAL SCANNING; CITRATES; DELAYED-ACTION PREPARATIONS; DRUG COMPOUNDING; PARABENS; PLASTICIZERS; POLYETHYLENE GLYCOLS; TEMPERATURE; TENSILE STRENGTH; THEOPHYLLINE; VISCOSITY; X-RAY DIFFRACTION;

EID: 77955449509     PISSN: 02652048     EISSN: 14645246     Source Type: Journal    
DOI: 10.3109/02652048.2010.484105     Document Type: Article

References (44)

1. Andrews GP, Jones DS, Diak OA, McCoy CP, Watts AB, McGinity JW. 2008. The manufacture and characterisation of hot-melt extruded enteric tablets. Eur J Pharm Biopharm 69:264-273.
2. Avramov I. 2005. Viscosity in disordered media. J Non-Cryst Sol 351:3163-3173.
3. Bando H, McGinity JW. 2006. Relationship between drug dissolution and leaching of plasticizer for pellets coated with an aqueous Eudragit® S100:L100 dispersion. Int J Pharm 323:11-17.
4. Bodmeier R, Paeratakul O. 1992. Leaching of water-soluble plasticizers from polymeric films prepared from aqueous colloidal polymer dispersions. Drug Dev Ind Pharm 18:1865-1882.
5. Bruce C, Fegely KA, Rajabi-Siahboomi AR, McGinity JW. 2007. Crystal growth formation in melt extrudates. Int J Pharm 341:162-172.
6. Bruce LD, Shah NH, Malick WA, Infeld MH, McGinity JW. 2005. Properties of hot-melt extruded tablet formulations for the colonic delivery of 5-aminosalicylic acid. Eur J Pharm Biopharm 59:85-97.
7. Crowley MM, Schroeder B, Fredersdorf A, Obara S, Talarico M, Kucera SA, McGinity JW. 2004. Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. Int J Pharm 269:509-522.
8. de Brabander C, Vervaet C, Remon JP. 2003. Development and evaluation of sustained release mini-matrices prepared via hot melt extrusion. J Contr Rel 89:235-247.
9. Fadda HM, Hernández MC, Margetson DN, McAllister SM, Basit AW, Brocchini S, Suárez N. 2008. The molecular interactions that influence the plasticizer dependent dissolution of acrylic polymer films. J Pharm Sci 97:3957-3971.
10. Follonier N, Doelker E, Cole ET. 1994. Evaluation of hot-melt extrusion as a new technique for the production of polymer-based pellets for sustained release capsules containing high loadings of freely soluble drugs. Drug Dev Ind Pharm 20:1323-1339.
11. Ghebre-Sellassie I, 1994. Multiparticulate oral drug delivery. New York: Marcel Dekker.
12. Ghebre-Sellassie I, Martin C, Elliot B. 2007. Continuous melt spheronization apparatus and process for the production of pharmaceutical pellets. US 0264328.
13. Goodrich JE, Porter RS. 1967. A rheological interpretation of torque-rheometer data. Polym Eng Sci 7:45-51.
14. Gryczke A. 2008. Pellets comprising an active substance matrix resistant to gastric juice. WO 2008/101743.
15. Lecomte F, Siepmann J, Walther M, MacRae R, Bodmeier R. 2004a. Polymer blends used for the coating of multiparticulates: comparison of aqueous and organic coating techniques. Pharm Res 21:882-890. (Pubitemid 39011315)
16. Lecomte F, Siepmann J, Walther M, MacRae RJ, Bodmeier R. 2004b. Polymer blends used for the aqueous coating of solid dosage forms: importance of the type of plasticizer. J Contr Rel 99:1-13.
17. Li Y, Wu D, Zhang J, Chang L, Wu D, Fang Z, Shi Y. 2000. Measurement and statistics of single pellet mechanical strength of differently shaped catalysts. Powder Technol 113:176-184.
18. Menon ARR, Sonia TA, Sudha JD. 2006. Studies on blends of natural rubber and ethylene propylene diene rubber modified with phosphorylated cardanol prepolymer: processability, physico-mechanical properties, and morphology. J Appl Polym Sci 102:5123-5130.
19. Mueller W, Spengler R, Grabowski S, Sanner A. 1996. Solid depot drug form. US 5552159.
20. Nicklasson F, Alderborn G. 1999. Modulation of the tabletting behaviour of microcrystalline cellulose pellets by the incorporation of polyethylene glycol. Eur J Pharm Sci 9:57-65.
21. Okarter TU, Singla K. 2000. The effects of plasticizers on the release of metoprolol tartrate from granules coated with a polymethacrylate film. Drug Dev Ind Pharm 26:323-329.
22. Oshlack B, Chasin M, Huan H-P. 2004. Melt-extrusion multiparticulates. US 6706281 B2.
23. Rein R. 2005. Device for producing round pellets. EP 1563897.
24. Rohera B, Parikh N. 2002. Influence of plasticizer type and coat level on Surelease® film properties. Pharm Dev Technol 7:407-420.
25. Saettone MF, Perini G, Rijli P, Rodriguez L, Cini M. 1995. Effect of different polymer-plasticizer combinations on in vitro release of theophylline from coated pellets. Int J Pharm 126:83-88.
26. Sauer D, McGinity JW. 2009. Influence of additives on melt viscosity, surface tension, and film formation of dry powder coatings. Drug Dev Ind Pharm 35:646-654.
27. Schilling SU, Bruce CD, Shah NH, Malick AW, McGinity JW. 2008. Citric acid monohydrate as a release-modifying agent in melt extruded matrix tablets. Int J Pharm 361:158-168.
28. Schilling SU, Shah NH, Malick AW, McGinity JW. 2010. Properties of melt extruded enteric matrix pellets. Eur J Pharm Biopharm 74:352-361.
29. Shenoy AV, Saini DR, 1996. Fundamentals of polymer melt rheology. Thermoplastic melt rheology and processing. New York: Marcel Dekker. pp 53-94.
30. Thumma S, ElSohly MA, Zhang SQ, Gul W, Repka MA. 2008. Influence of plasticizers on the stability and release of a prodrug of 9-tetrahydrocannabinol incorporated in poly (ethylene oxide) matrices. Eur J Pharm Biopharm 70:605-614.
31. Timoshenko SP, Goodier JN. 1951. Theory of elasticity. New York, Toronto, London: McGraw-Hill.
32. Torrado JJ, Augsburger LL. 1994. Effect of different excipients on the tableting of coated particles. Int J Pharm 106:149-155.
33. Verhoeven E, De Beer TRM, Van den Mooter G, Remon JP, Vervaet C. 2008. Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion. Eur J Pharm Biopharm 69:312-319.
34. Wang CC, Zhang G, Shah NH, Infeld MH, Malick AW, McGinity JW. 1996. Mechanical properties of single pellets containing acrylic polymers. Pharm Dev Technol 1:213-222.
35. Wang CC, Zhang G, Shah NH, Infeld MH, Malick WA, McGinity JW. 1997. Influence of plasticizers on the mechanical properties of pellets containing Eudragit® RS 30D. Int J Pharm 152:153-163.
36. Wang JS, Porter RS. 1995. On the viscosity-temperature behavior of polymer melts. Rheol Acta 34:496-503.
37. Wypych G, 2004. Effect of plasticizers on properties of plasticized materials. In: Wypych G, editor. Handbook ofplasticizers. Toronto, New York: William Andrew. pp 193-204.
38. Young CR, Crowley M, Dietzsch C, McGinity JW. 2007. Physicochemical properties of film-coated melt-extruded pellets. J Microencapsul 24:57-71.
39. Young CR, Dietzsch C, Cerea M, Farrell T, Fegely KA, Rajabi-Siahboomi A, McGinity JW. 2005b. Physicochemical characterization and mechanisms of release of theophylline from melt-extruded dosage forms based on a methacrylic acid copolymer. Int J Pharm 301:112-120.
40. Young CR, Dietzsch C, McGinity JW. 2005a. Compression of controlled-release pellets produced by a hot-melt extrusion and spheronization process. Pharm Dev Technol 10:133-139.
41. Young CR, Koleng JJ, McGinity JW. 2002. Production of spherical pellets by a hot-melt extrusion and spheronization process. Int J Pharm 242:87-92.
42. Young CR, Koleng JJ, McGinity JW. 2003. Properties of drug-containing spherical pellets produced by a hot-melt extrusion and spheronization process. J Microencapsul 20:613-625.
43. Zhu Y, Mehta KA, McGinity JW. 2006. Influence of plasticizer level on the drug release from sustained release film coated and hot-melt extruded dosage forms. Pharm Dev Technol 11:285-294.
44. Zhu Y, Shah NH, Malick AW, Infeld MH, McGinity JW. 2002. Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate. Int J Pharm 241:301-310. (Pubitemid 34718031)