-
1
-
-
2042472664
-
-
ITRS International technology roadmap for semiconductors, online at
-
ITRS 2007 Executive summary, 2007 edition. International technology roadmap for semiconductors, online at www.itrs.net
-
(2007)
Executive Summary, 2007 Edition
-
-
-
2
-
-
33846224261
-
Hotspot-limited microprocessors: Direct temperature and power distribution measurements
-
Hamann H F, Weger A, Lacey J A, Hu Z, Bose P, Cohen E and Wakil J 2007 Hotspot-limited microprocessors: direct temperature and power distribution measurements IEEE J. Solid-State Circuits 42 56-65
-
(2007)
IEEE J. Solid-State Circuits
, vol.42
, Issue.1
, pp. 56-65
-
-
Hamann, H.F.1
Weger, A.2
Lacey, J.A.3
Hu, Z.4
Bose, P.5
Cohen, E.6
Wakil, J.7
-
3
-
-
0035363424
-
Assessment of high-heat-flux thermal management schemes
-
Mudawar I 2001 Assessment of high-heat-flux thermal management schemes IEEE Trans. Compon. Packag. Technol. 24 122-41
-
(2001)
IEEE Trans. Compon. Packag. Technol.
, vol.24
, Issue.2
, pp. 122-141
-
-
Mudawar, I.1
-
4
-
-
33947242257
-
Direct liquid cooling of high flux micro and nano electronic components
-
Bar-Cohen A, Arik M and Ohadi M 2006 Direct liquid cooling of high flux micro and nano electronic components Proc. IEEE 94 1549-70
-
(2006)
Proc. IEEE
, vol.94
, Issue.8
, pp. 1549-1570
-
-
Bar-Cohen, A.1
Arik, M.2
Ohadi, M.3
-
5
-
-
33747624628
-
State of the art of high heat flux cooling technologies
-
Agostini B, Fabbri M, Park J E, Wojtan L, Thome J R and Michel B 2007 State of the art of high heat flux cooling technologies Heat Transfer Eng. 28 258-81
-
(2007)
Heat Transfer Eng.
, vol.28
, Issue.4
, pp. 258-281
-
-
Agostini, B.1
Fabbri, M.2
Park, J.E.3
Wojtan, L.4
Thome, J.R.5
Michel, B.6
-
7
-
-
32944472432
-
Sintered porous medium heat sink for cooling of high-power mini-devices
-
Hetsroni G, Gurevich M and Rozenblit R 2006 Sintered porous medium heat sink for cooling of high-power mini-devices Int. J. Heat Fluid Flow 27 259-66
-
(2006)
Int. J. Heat Fluid Flow
, vol.27
, Issue.2
, pp. 259-266
-
-
Hetsroni, G.1
Gurevich, M.2
Rozenblit, R.3
-
8
-
-
27744571195
-
Micro-jet arrays for cooling of electronic equipment
-
(Toronto, ON: American Society of Mechanical Engineers) Part B
-
Overholt M R, McCandless A, Kelly K W, Becnel C J and Motakef S 2005 Micro-jet arrays for cooling of electronic equipment Proc. 3rd Int. Conf. Microchannels and Minichannels (Toronto, ON: American Society of Mechanical Engineers) Part B, pp 249-52
-
(2005)
Proc. 3rd Int. Conf. Microchannels and Minichannels
, pp. 249-52
-
-
Overholt, M.R.1
McCandless, A.2
Kelly, K.W.3
Becnel, C.J.4
Motakef, S.5
-
10
-
-
25444515747
-
Boiling heat transfer in rectangular microchannels with reentrant cavities
-
Kosar A, Kuo C J and Peles Y 2005 Boiling heat transfer in rectangular microchannels with reentrant cavities Int. J. Heat Mass Transfer 48 4867-86
-
(2005)
Int. J. Heat Mass Transfer
, vol.48
, Issue.23-24
, pp. 4867-4886
-
-
Kosar, A.1
Kuo, C.J.2
Peles, Y.3
-
11
-
-
0034176446
-
An experimental study of two phase flow and boiling heat transfer in bi-dispersed porous channels
-
Chen Z Q, Cheng P and Zhao T S 2000 An experimental study of two phase flow and boiling heat transfer in bi-dispersed porous channels Int. Commun. Heat Mass Transfer 27 293-302
-
(2000)
Int. Commun. Heat Mass Transfer
, vol.27
, Issue.3
, pp. 293-302
-
-
Chen, Z.Q.1
Cheng, P.2
Zhao, T.S.3
-
14
-
-
61449122241
-
Gas-assisted thin-film evaporation from confined spaces for dissipation of high heat fluxes
-
Narayanan S, Fedorov A G and Joshi Y K 2009 Gas-assisted thin-film evaporation from confined spaces for dissipation of high heat fluxes Nanoscale Microscale Thermophys. Eng. 13 30-53
-
(2009)
Nanoscale Microscale Thermophys. Eng.
, vol.13
, Issue.1
, pp. 30-53
-
-
Narayanan, S.1
Fedorov, A.G.2
Joshi, Y.K.3
-
17
-
-
0002599865
-
Self-ordered pore structure of anodized aluminum on silicon and pattern transfer
-
Crouse D, Lo Y, Miller A and Crouse M 2000 Self-ordered pore structure of anodized aluminum on silicon and pattern transfer Appl. Phys. Lett. 76 49
-
(2000)
Appl. Phys. Lett.
, vol.76
, Issue.1
, pp. 49
-
-
Crouse, D.1
Lo, Y.2
Miller, A.3
Crouse, M.4
-
18
-
-
0005656995
-
Self-organized formation of hexagonal pore arrays in anodic alumina
-
Jessensky O, Müller F and Gösele U 1998 Self-organized formation of hexagonal pore arrays in anodic alumina Appl. Phys. Lett. 72 1173
-
(1998)
Appl. Phys. Lett.
, vol.72
, Issue.10
, pp. 1173
-
-
Jessensky, O.1
Müller, F.2
Gösele, U.3
-
19
-
-
33748262432
-
Fast fabrication of long-range ordered porous alumina membranes by hard anodization
-
Lee W, Ji R, Gösele U and Nielsch K 2006 Fast fabrication of long-range ordered porous alumina membranes by hard anodization Nat. Mater. 5 741-7
-
(2006)
Nat. Mater.
, vol.5
, Issue.9
, pp. 741-747
-
-
Lee, W.1
Ji, R.2
Gösele, U.3
Nielsch, K.4
-
20
-
-
0000848295
-
Hexagonal pore arrays with a 50-420 nm interpore distance formed by self-organization in anodic alumina
-
Li A, Müller F, Birner A, Nielsch K and Gösele U 1998 Hexagonal pore arrays with a 50-420 nm interpore distance formed by self-organization in anodic alumina J. Appl. Phys. 84 6023
-
(1998)
J. Appl. Phys.
, vol.84
, Issue.11
, pp. 6023
-
-
Li, A.1
Müller, F.2
Birner, A.3
Nielsch, K.4
Gösele, U.5
-
21
-
-
4444289857
-
Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina
-
Masuda H and Fukuda K 1995 Ordered metal nanohole arrays made by a two-step replication of honeycomb structures of anodic alumina Science 268 1466
-
(1995)
Science
, vol.268
, Issue.5216
, pp. 1466
-
-
Masuda, H.1
Fukuda, K.2
-
22
-
-
0000684647
-
Highly ordered nanochannel-array architecture in anodic alumina
-
Masuda H, Yamada H, Satoh M, Asoh H, Nakao M and Tamamura T 1997 Highly ordered nanochannel-array architecture in anodic alumina Appl. Phys. Lett. 71 2770
-
(1997)
Appl. Phys. Lett.
, vol.71
, Issue.19
, pp. 2770
-
-
Masuda, H.1
Yamada, H.2
Satoh, M.3
Asoh, H.4
Nakao, M.5
Tamamura, T.6
-
23
-
-
0042881166
-
Formation of thick porous anodic alumina films and nanowire arrays on silicon wafers and glass
-
Rabin O, Herz P, Lin Y, Akinwande A, Cronin S and Dresselhaus M 2003 Formation of thick porous anodic alumina films and nanowire arrays on silicon wafers and glass Adv. Funct. Mater. 13 631-8
-
(2003)
Adv. Funct. Mater.
, vol.13
, Issue.8
, pp. 631-638
-
-
Rabin, O.1
Herz, P.2
Lin, Y.3
Akinwande, A.4
Cronin, S.5
Dresselhaus, M.6
-
24
-
-
33845241456
-
A study of anodization process during pore formation in nanoporous alumina templates
-
Wu Z, Richter C and Menon L 2007 A study of anodization process during pore formation in nanoporous alumina templates J. Electrochem. Soc. 154 E8
-
(2007)
J. Electrochem. Soc.
, vol.154
, Issue.1
, pp. 8
-
-
Wu, Z.1
Richter, C.2
Menon, L.3
-
25
-
-
0001094706
-
Ordered semiconductor ZnO nanowire arrays and their photoluminescence properties
-
Li Y, Meng G W, Zhang L D and Phillipp F 2000 Ordered semiconductor ZnO nanowire arrays and their photoluminescence properties Appl. Phys. Lett. 76 2011
-
(2000)
Appl. Phys. Lett.
, vol.76
, Issue.15
, pp. 2011
-
-
Li, Y.1
Meng, G.W.2
Zhang, L.D.3
Phillipp, F.4
-
26
-
-
1842662381
-
Dynamics and temperature dependence of etching processes of porous and barrier aluminum oxide layers
-
Brevnov D, Rama Rao G, López G and Atanassov P 2004 Dynamics and temperature dependence of etching processes of porous and barrier aluminum oxide layers Electrochim. Acta 49 2487-94
-
(2004)
Electrochim. Acta
, vol.49
, Issue.15
, pp. 2487-2494
-
-
Brevnov, D.1
Rama Rao, G.2
López, G.3
Atanassov, P.4
-
27
-
-
33847213936
-
Control of the anodic aluminum oxide barrier layer opening process by wet chemical etching
-
Han C, Willing G, Xiao Z and Wang H 2007 Control of the anodic aluminum oxide barrier layer opening process by wet chemical etching Langmuir 23 1564-8
-
(2007)
Langmuir
, vol.23
, Issue.3
, pp. 1564-1568
-
-
Han, C.1
Willing, G.2
Xiao, Z.3
Wang, H.4
-
28
-
-
58649102054
-
Pore opening detection for controlled dissolution of barrier oxide layer and fabrication of nanoporous alumina with through-hole morphology
-
Lillo M and Losic D 2009 Pore opening detection for controlled dissolution of barrier oxide layer and fabrication of nanoporous alumina with through-hole morphology J. Membr. Sci. 327 11-7
-
(2009)
J. Membr. Sci.
, vol.327
, Issue.1-2
, pp. 11-17
-
-
Lillo, M.1
Losic, D.2
-
29
-
-
18744410068
-
Fabrication of SU-8 multilayer microstructures based on successive CMOS compatible adhesive bonding and releasing steps
-
Agirregabiria M, Blanco F, Berganzo J, Arroyo M, Fullaondo A, Mayora K and Ruano-Lopez J 2005 Fabrication of SU-8 multilayer microstructures based on successive CMOS compatible adhesive bonding and releasing steps Lab Chip 5 545-52
-
(2005)
Lab Chip
, vol.5
, Issue.5
, pp. 545-552
-
-
Agirregabiria, M.1
Blanco, F.2
Berganzo, J.3
Arroyo, M.4
Fullaondo, A.5
Mayora, K.6
Ruano-Lopez, J.7
-
30
-
-
3142757031
-
Novel three-dimensional embedded SU-8 microchannels fabricated using a low temperature full wafer adhesive bonding
-
Blanco F, Agirregabiria M, Garcia J, Berganzo J, Tijero M, Arroyo M, Ruano J, Aramburu I and Mayora K 2004 Novel three-dimensional embedded SU-8 microchannels fabricated using a low temperature full wafer adhesive bonding J. Micromech. Microeng. 14 1047-56
-
(2004)
J. Micromech. Microeng.
, vol.14
, Issue.7
, pp. 1047-1056
-
-
Blanco, F.1
Agirregabiria, M.2
Garcia, J.3
Berganzo, J.4
Tijero, M.5
Arroyo, M.6
Ruano, J.7
Aramburu, I.8
Mayora, K.9
-
31
-
-
2442562317
-
Novel low-temperature CMOS-compatible full-wafer-bonding process for the fabrication of 3D embedded microchannels using SU-8
-
Francisco J B, Maria A, Maria T, Javier B, Jorge G, Maria A, Jesus M R, Inigo A and Kepa M 2004 Novel low-temperature CMOS-compatible full-wafer-bonding process for the fabrication of 3D embedded microchannels using SU-8 Proc. SPIE 5276 131-42
-
(2004)
Proc. SPIE
, vol.5276
, pp. 131-142
-
-
Francisco, J.B.1
Maria, A.2
Maria, T.3
Javier, B.4
Jorge, G.5
Maria, A.6
Jesus, M.R.7
Inigo, A.8
Kepa, M.9
-
32
-
-
2342620804
-
Integrated microfluidics based on multi-layered SU-8 for mass spectrometry analysis
-
Carlier J, Arscott S, Thomy V, Fourrier J, Caron F, Camart J, Druon C and Tabourier P 2004 Integrated microfluidics based on multi-layered SU-8 for mass spectrometry analysis J. Micromech. Microeng. 14 619-24
-
(2004)
J. Micromech. Microeng.
, vol.14
, Issue.4
, pp. 619-624
-
-
Carlier, J.1
Arscott, S.2
Thomy, V.3
Fourrier, J.4
Caron, F.5
Camart, J.6
Druon, C.7
Tabourier, P.8
-
33
-
-
34748922500
-
A bonding technique using hydrophilic SU-8
-
Chen Y and Lee D 2007 A bonding technique using hydrophilic SU-8 J. Micromech. Microeng. 17 1978-84
-
(2007)
J. Micromech. Microeng.
, vol.17
, Issue.10
, pp. 1978-1984
-
-
Chen, Y.1
Lee, D.2
-
34
-
-
0141495420
-
Fabrication of micronozzles using low-temperature wafer-level bonding with SU-8
-
Li S, Freidhoff C, Young R and Ghodssi R 2003 Fabrication of micronozzles using low-temperature wafer-level bonding with SU-8 J. Micromech. Microeng. 13 732-8
-
(2003)
J. Micromech. Microeng.
, vol.13
, Issue.5
, pp. 732-738
-
-
Li, S.1
Freidhoff, C.2
Young, R.3
Ghodssi, R.4
-
35
-
-
4544285779
-
Fabrication of miniaturized fluidic devices using SU-8 based lithography and low temperature wafer bonding
-
Svasek P, Svasek E, Lendl B and Vellekoop M 2004 Fabrication of miniaturized fluidic devices using SU-8 based lithography and low temperature wafer bonding Sensors Actuators A 115 591-9
-
(2004)
Sensors Actuators
, vol.115
, Issue.2-3
, pp. 591-599
-
-
Svasek, P.1
Svasek, E.2
Lendl, B.3
Vellekoop, M.4
-
36
-
-
17644373522
-
Wafer-level bonding of MEMS structures with SU-8 epoxy photoresist
-
Tuomikoski S and Franssila S 2004 Wafer-level bonding of MEMS structures with SU-8 epoxy photoresist Phys. Scr. 114 223-6
-
(2004)
Phys. Scr.
, vol.114
, pp. 223-226
-
-
Tuomikoski, S.1
Franssila, S.2
-
37
-
-
17644392079
-
Free-standing SU-8 microfluidic chips by adhesive bonding and release etching
-
Tuomikoski S and Franssila S 2005 Free-standing SU-8 microfluidic chips by adhesive bonding and release etching Sensors Actuators A 120 408-15
-
(2005)
Sensors Actuators
, vol.120
, Issue.2
, pp. 408-415
-
-
Tuomikoski, S.1
Franssila, S.2
-
38
-
-
0032026019
-
Analytical modeling of spreading resistance in flux tubes, half spaces, and compound disks
-
Yovanovich M, Culham J and Teertstra P 1998 Analytical modeling of spreading resistance in flux tubes, half spaces, and compound disks IEEE Trans. Compon. Packag. Manuf. Technol. A 21 168-76
-
(1998)
IEEE Trans. Compon. Packag. Manuf. Technol.
, vol.21
, Issue.1
, pp. 168-176
-
-
Yovanovich, M.1
Culham, J.2
Teertstra, P.3
-
39
-
-
0033311197
-
Spreading resistance of Iso ux rectangles and strips on compound flux channels
-
Yovanovich M, Muzychka Y and Culham J 1999 Spreading resistance of Iso ux rectangles and strips on compound flux channels J. Thermophys. Heat Transfer 13 495-500
-
(1999)
J. Thermophys. Heat Transfer
, vol.13
, Issue.4
, pp. 495-500
-
-
Yovanovich, M.1
Muzychka, Y.2
Culham, J.3
-
40
-
-
77955187017
-
Experimental characterization of a micro-scale thin-film evaporative cooling device
-
(Las Vegas) accepted
-
Narayanan S, Fedorov A G and Joshi Y K 2010 Experimental characterization of a micro-scale thin-film evaporative cooling device ITHERM (Las Vegas) accepted.
-
(2010)
ITHERM
-
-
Narayanan, S.1
Fedorov, A.G.2
Joshi, Y.K.3
|