The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: A review

Progress in Materials Science

Volumn 53, Issue 5, 2008, Pages 775-837

  Saunders, S R J ^a   Monteiro, M ^a   Rizzo, F ^a  

^a PONTIFICAL CATHOLIC UNIVERSITY OF RIO DE JANEIRO   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

CONDENSATION; DISSOCIATION; HIGH TEMPERATURE OPERATIONS; NICKEL OXIDE; OXIDATION; WATER VAPOR;

CHROMIA; OXIDATION RATES; PROTECTIVE OXIDE SYSTEMS;

ALUMINA;

EID: 44749083944     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2007.11.001     Document Type: Review

References (159)

1. Pritchard David. Biomass combustion gas turbine CHP. Appendix 1 and 2, ETSU B/U1/00679/00/REP, DTI Pub URN No 02/1346, Contractor Talbott's Heating Ltd.
2. 3 alloy and conductivity of the oxide scale - effects of water vapor. J Electrochem Soc 150 (2003) B374-B379
3. Douglass D.L., Kofstad P., Rahmel A., and Wood G.C. International workshop on high temperature oxidation - subject area 1: the role of water vapour in the oxidation of metals and alloys. Oxid Met 45 5,6 (1996) 529-545
4. Buscail H., Heinze S., Dufour Ph., and Larpin J.P. Water-vapor-effect on the oxidation of Fe 21.5 wt.% Cr, 5.6 wt.%Al at 1000 °C. Oxid Met 47 5/6 (1997) 445-464
5. Al-Badairy H., and Tatlock G. The influence of the moisture content of the atmosphere on alumina scale formation and growth during high temperature oxidation of PM2000. Mater High Temp 17 (2000) 133-137
6. Boggs W.E. The oxidation of iron aluminium alloys from 450 °C to 900 °C. J Electrochem Soc 118 (1977) 906-913
7. Onal K., Maris-Sida M.C., Meier G.H., and Pettit F.S. Water vapor effects on the cyclic oxidation resistance of alumina forming alloys. Mater High Temp 20 (2003) 81-91
8. Janakiraman R., Meier G.H., and Pettit F.S. The effect of water vapor on the oxidation of alloys that develop alumina scales for protection. Metall Mater Trans A 30A (1999) 2905-2913
9. Smialek J.L., and Morscher G.N. Delayed alumina scale spallation on Rene'N5 + Y: moisture effects and acoustic emission. Mater Sci Eng A332 (2002) 11-24
10. 2O vapour mixtures. Corrosion Sci 17 (1977) 237-252
11. Regina J.R., DuPont J.N., and Marder A.R. The effect of water vapor on passive-layer stability and corrosion behavior of Fe-Al-Cr base alloys. Oxid Met 61 1/2 (2004) 69-90
12. Regina J.R., DuPont J.N., and Marder A.R. Gaseous corrosion resistance of Fe-Al based alloys containing Cr additions. Part II: Scale morphology. Mater Sci Eng A 405 (2005) 102-110
13. Zhang Y., Pint B.A., Haynes J.A., and Tortorelli P.F. The effect of water vapor on the oxidation behavior of CVD iron-aluminide coatings. Oxid Met 62 1/2 (2004) 103-120
14. Zhou C., Yu J., Gong S., and Xu H. Influence of water vapor on the isothermal oxidation behavior of low pressure plasma sprayed NiCrAlY coating at high temperature. Surf Coat Technol 161 (2002) 86-91
15. 2O atmospheres. Surf Coat Technol 82 (1996) 133-144
16. Liu Z., and Narita T. Oxidation behavior of TiAl(Cr, Ag) at 900 °C in water vapor. Intermetallics 12 (2004) 459-468
17. 2O-gas mixtures at 920 °C. Oxid Met 47 (1997) 117-137
18. Jacob Y.P., Haanappel V.A.C., Stroosnijder M.F., Buscail H., Fielitz P., and Borchardt G. The effect of gas composition on the isothermal oxidation behaviour of PM chromium. Corros Sci 44 (2002) 2027-2039
19. 2O, oxide-growth mechanisms, and scale adherence. Oxid Met 54 1/2 (2000) 1-10
20. Henry S., Mougin J., Wouters Y., Petit J.-P., and Galerie A. Characterization of chromia scales grown on pure chromium in different oxidizing atmospheres. Mater High Temp 17 (2000) 231-234
21. Hänsel M., Quadakkers W.J., and Young D.J. Role of water vapor in chromia-scale growth at low oxygen partial pressure. Oxid Met 59 3/4 (2003) 285-301
22. 2O. Mater High Temp 22 (2005) 113-120
23. Galerie A., Henry S., Wouters Y., Mermoux M., Petit J.-P., and Antoni L. Mechanisms of chromia scale failure during the course of 15-18Cr ferritic stainless steel oxidation in water vapour. Mater High Temp 22 (2005) 105-112
24. Fujii C.T., and Meussner R.A. The mechanism of the high temperature oxidation of iron-chromium alloys in water vapour. JECS 111 11 (1964) 1215-1221
25. 2O mixtures. Oxid Met 63 5/6 (2005) 401-422
26. 2O atmosphere, microstructure and kinetics. Mater Sci Eng A361 (2003) 198-212
27. Cheng S.-Y., Kuan S.-L., and Tsai W.-T. Effect of water vapor on annealing scale formation on 316 SS. Corros Sci 48 (2006) 634-649
28. Yang Z., Xia G., Singh P., and Stevenson J.W. Effects of water vapor on oxidation behavior of ferritic stainless steels under solid oxide fuel cell interconnect exposure conditions. Solid State Ionics 176 (2005) 1495-1503
29. Nakagawa K., Matsunaga Y., and Yanagisawa T. Corrosion behavior of ferritic steels on the air sides of boiler tubes in a steam/air dual environment. Proceedings of the conference "life cycle issues in advanced energy systems". Sci Rev (2003) 67-72
30. Peng X., Yan J., Zhou Y., and Wang F. Effect of grain refinement on the resistance of 304 stainless steel to breakaway oxidation in wet air. Acta Mater 53 (2005) 5079-5088
31. Jianian S., Longjiang Z., and Tiefan L. High-temperature oxidation of Fe-Cr alloys in wet oxygen. Oxid Met 48 3/4 (1997) 347-356
32. Pieraggi B., Rolland C., and Bruckel P. Morphological characteristics of oxide scales grown on H11 steel oxidised in dry or wet air. Mater High Temp 22 (2005) 61-68
33. Monteiro Mauri{dotless}́cio de Jesus, Saunders Stuart, Assunção Fernando Cosme Rizzo. The effect of water vapour on the high-temperature oxidation of a high speed steel. In: Proceedings of ABM 2006; 2006. p. 128-37.
34. 2 atmospheres. Oxid Met 42 (1994) 163-190
35. Yang Z., Walker M.S., Singh P., Stevenson J.W., and Norby T. Oxidation behaviour of ferritic stainless steels under SOFC interconnect exposure conditions. J Electrochem Soc 151 (2004) B669-B678
36. Ehlers J., Young D.J., Smaardijk E.J., Tyagi A.K., Penkalla H.J., Singheiser L., et al. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments. Corrosion Sci 48 (2006) 3428-3454
37. Asteman H., Svensson J.-E., and Johansson L.-G. Evidence for chromium evaporation influencing the oxidation of 304L: the effect of temperature and flow rate. Oxid Met 57 3/4 (2002) 193-216
38. Asteman H., Svensson J.-E., Norell M., and Johansson L.-G. Influence of water vapor and flow rate on the high-temperature oxidation of 304L; Effect of chromium oxide hydroxide evaporation. Oxid Met 54 1/2 (2000) 11-26
39. Halvarsson M., Tang J.E., Asteman H., Svensson J.-E., and Johansson L.-G. Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600 °C. Corrosion Sci 48 (2006) 2014-2035
40. 2 mixtures at 600 °C: the effect of water-vapour-enhanced chromium evaporation. Corrosion Sci 44 (2002) 2635-2649
41. Segerdahl K., Svensson J.-E., Halvarsson M., Panas I., and Johansson L.-G. Breakdown of the protective oxide on 11% Cr steel at high temperature in the presence of water vapor and oxygen, the influence of chromium vaporization. Mater High Temp 22 (2005) 69-78
42. 2O. Oxid Met 59 5/6 (2003) 517-527
43. Opila E.J. Volatility of common protective oxides in high-temperature water vapor: current understanding and unanswered questions. Mater Sci Forum 461-464 (2004) 765-774
44. Holcomb G.R., and Alman D.E. The effect of manganese additions on the reactive evaporation of chromium in Ni-Cr alloys. Scripta Mater 54 (2006) 1821-1825
45. Rahmel A. Einfluss von Wasserdampf und Kohlendioxyd auf die Oxydation von Nickel in Sauerstoff bei Hohen Temperaturen. Corrosion Sci 5 (1965) 815-820
46. Wood G.C., Wright I.G., Hodgkiess T., and Whittle D.P. A comparison of the oxidation of Fe-Cr, Ni-Cr and Co-Cr alloys in oxygen and water vapour. Werkstoffe und Korrosion 21 (1970) 900-910
47. England D.M., and Virkar A.V. Oxidation kinetics of some nickel-based superalloy foils in humidified hydrogen and electronic resistance of the oxide scale formed, Part II. J Electrochem Soc 148 (2001) A330-A338
48. England D.M., and Virkar A.V. Oxidation kinetics of some nickel-based superalloy foils and electronic resistance of the oxide scale formed in air, Part I. J Electrochem Soc 146 (1999) 3196-3202
49. Hussain N., Qureshi A.H., Shahid K.A., Chughtai N.A., and Khalid F.A. High-temperature oxidation behavior of HASTELLOY C-4 in steam. Oxid Met 61 5/6 (2004) 355-364
50. Hussain N., Shahid K.A., Khan I.H., and Rahman S. Oxidation of high temperature alloys (superalloys) at elevated temperatures in air: 1. Oxid Met 41 (1994) 251-270
51. Deal B.E., and Groves A.S. General relationship for the thermal oxidation of silicon. J Phys 36 (1965) 3770-3778
52. Irene E.A. Silicon oxidation studies: a revised model for thermal oxidation. J Appl Phys 54 (1983) 5416-5420
53. Bhat V.J., Bhat K.N., and Subrahmanyam A. Characterization of ultrathin oxides of silicon grown by wet oxidation at 800 °C. Solid State Electron 45 (2001) 1127-1135
54. Sofield C.J., and Stoneham A.M. Oxidation of silicon: the VLSI gate dielectric. Semicond Sci Technol 10 (1995) 215-244
55. Kovalgin A. Hof A, Schmitz J. An approach to modeling of silicon oxidation in a wet ultra-diluted ambient. Microelectron Eng 80 (2005) 432-435
56. Hu S.M. New oxide growth law and the thermal oxidation of silicon. Appl Phys Lett 42 (1983) 874
57. Opila E.J. Variation of the oxidation rate of silicon carbide with water vapour pressure. J Am Ceram Soc 82 (1999) 625-636
58. Opila E.J. Volatility of common protective oxides in high-temperature water vapor: current understanding and unanswered questions. Mater Sci Forum 461-464 (2004) 65-774
59. 2 scale volatility under combustion conditions 1: experimental results and empirical model. J Am Ceram Soc 82 (1999) 1817-1825
60. 2-based composite. J Eur Ceram Soc 25 (2005) 1-11
61. Ishitsuka T., Inoue Y., and Ogawa H. Effect of silicon on the steam oxidation resistance of a 9%Cr heat resistant steel. Oxid Met 61 1/2 (2004) 125-142
62. Wouters Y., Bamba G., Galerie A., Mermoux M., and Petit J.-P. Oxygen and water vapour oxidation of 15Cr ferritic oxygen and water vapour oxidation of 15Cr ferritic stainless steels with different silicon contents. Mater Sci Forum 461-464 (2004) 839-848
63. Ueda M., Oyama Y., Kawamura K., and Maruyama T. Oxygen potential distribution during disappearance of the internal oxidation zone formed in the steam oxidation of Fe-9Cr-0.26Si ferritic steel at 973 K. Mater High Temp 22 (2005) 79-85
64. Ueda M., Nanko M., Kawamura K., and Maruyama T. Formation and disappearance of an internal oxidation zone in the initial stage of the steam oxidation of Fe-9Cr-0.26Si ferritic steel. Mater High Temp 20 (2003) 109-114
65. Wouters Y., Galerie A., and Petit J.-P. Thermal oxidation of titanium by water vapour. Solid State Ionics 104 (1997) 89-96
66. Zeller A., Dettenwanger F., and Schütze M. Influence of water vapour on the oxidation behaviour of titanium aluminides. Intermetallics 10 (2002) 59-72
67. Taniguchi S., Hongawara N., and Shibata T. Influence of water vapour on the isothermal oxidation behaviour of TiAl at high temperatures. Mater Sci Eng A307 (2001) 107-112
68. Brady M.P., Smialek J.L., Humphrey D.L., and Smith J. The role of Cr in promoting protective alumina scale formation by γ-based Ti-Al-Cr Alloys - II. Oxidation behavior in air. Acta Mater 45 (1997) 2371-2382
69. Rahmel A., and Tobolski J. Einfluss von Wasserdampf und Kohlendioxyd auf die Oxydation von Eisen in Sauerstoff bei Hohen Temperaturen. Corrosion Sci 5 (1965) 333-346
70. Mrowec S. On the mechanism of high temperature oxidation of metals and alloys. Corrosion Sci 7 (1967) 563-578
71. Kofstad P. High temperature corrosion (1988), Elsevier Applied Science, London
72. Tuck C.W., Odgers M., and Sachs K. The oxidation of iron at 950 °C in oxygen/water vapour mixtures. Corrosion Sci 9 (1969) 271-285
73. Hayashi S., and Narita T. Competitive effect of water vapor and oxygen on the oxidation of Fe-5 wt.% Al alloy at 1073 K. Oxid Met 56 3/4 (2001) 251-270
74. Fukumoto M., Maeda S., Hayashi S., and Narita T. Effect of water vapor on the oxidation behavior of Fe-1.5Si in air at 1073 and 1273 K. Oxid Met 55 5/6 (2001) 401-422
75. Hayashi S., and Narita T. Transient oxidation behavior of Fe-5 wt.%Al alloy at 1073 K in atmospheres containing both oxygen and water vapor. Oxid Met 58 3/4 (2002) 319-330
76. Raynaud G.M., and Rapp R.A. In situ observation of whiskers, pyramids and pits during high temperature oxidation of metals. Oxid Met 21 (1984) 89-102
77. Tallman R.L., and Gulbransen E.A. J Electrochem Soc 114 (1967) 1227-1230
78. Quadakkers W.J., Ennis P.J., Żurek J., and Michalik M. Steam oxidation of ferritic steels - laboratory test kinetic data. Mater High Temp 22 (2005) 47-60
79. Ikeda Y., and Nii K. Mechanism of accelerated oxidation of Fe-Cr alloys in water vapour containing atmosphere. Trans Jpn Inst Met 26 (1984) 52-62
80. Anghel C., Hultquist G., Dong Q., Rundgren J., Saeki I., and Limbäck M. Gas-tight oxides - reality or just a hope. Mater Sci Forum 522-523 (2006) 93-102
81. 2). Mater High Temp 22 (2005) 15-25
82. Davies R.H., Dinsdale A.T., Gisby J.A., Robinson J.A.J., and Martin S.M. MTDATA - thermodynamic and phase equilibrium software from the national physical laboratory. CALPHAD 26 (2002) 229-271
83. Armitt J, Holmes DR, Manning MI, Meadowcroft DB, Metcalfe E. The spalling of steam-grown oxide from superheater and reheater tube steels. EPRI Report FP-686, February 1978.
84. Tedmon C.S. J Electrochem Soc 113 8 (1966) 766
85. Tobias Johnson J.R., and Panas I. Hydrolysis on transition metal oxide clusters and the stabilities of M-O-M bridges. Inorg Chem 39 (2000) 3192-3204
86. Tobias Johnson J.R., and Panas I. Water adsorption and hydrolysis on molecular transition metal oxides and oxyhydroxides. Inorg Chem 39 (2000) 3181-3191
87. Milewska A., Hierro M.P., Trilleros J.A., Bolivar F.J., and Perez F.J. Coating design using computational codes for steam oxidation conditions. Mater Sci Forum 461-464 (2004) 321-326
88. Saunders S.R.J., and McCartney L.N. Current understanding of steam oxidation - power plant and laboratory experience. Mater Sci Forum 522-523 (2006) 119-128
89. Henrich V.E., and Cox P.A. The surface science of metal oxides (1994), Cambridge University Press
90. Mansel R.I. Principals of adsorption and reaction on solid surface (1996), John Wiley & Sons, Inc, New York
91. Morrison S.R. The chemical physics of surfaces (1977), Plenum Press, New York
92. Pinzari F., Ascarelli P., Cappelli E., Giorgi R., and Turtù S. On the surface acid-base properties of titanium sheets. Appl Surf Sci 156 (2000) 1-8
93. Sun C., and Berg J.C. A review of the different techniques for solid surface acid-base characterization. Adv Colloid Interface Sci 105 (2003) 151-175
94. Kosmulski M. Chemical properties of material surfaces (2001), Dekker, New York
95. Kosmulski M. The pH-dependent surface charging and the points of zero charge. J Colloid Interface Sci 253 (2002) 77-87
96. Kosmulski M. pH-dependent surface charging and points of zero charge, II. Update. J Colloid Interface Sci 275 (2004) 214-224
97. Harju M., Levänen E., and Mäntylä T. Surface characterization of plasma sprayed oxide materials: estimation of surface acidity using mass titration. J Colloid Interface Sci 276 (2004) 346-353
98. Anghel C., Hörnlund E., Hultquist G., and Limbäck M. Gas phase analysis of CO interactions with solid surfaces at high temperatures. Appl Surf Sci 233 (2004) 392-401
99. 2, oxide-growth mechanisms and scale adherence. Oxid Met 55 3/4 (2001) 279-289
100. Hultquist G., and Szakálos P. Catalysed self-cleaning of air on the earth's surface. J Atmosph Chem 55 (2006) 131-146
101. Ǻkermark T. The use of oxygen isotopic labeling to understand oxidation mechanisms. Oxid Met 50 (1998) 167-188
102. Larsson K., Björkman H., and Hjort K. Role of water and oxygen in wet and dry oxidation of diamond. J Appl Phys 90 (2001) 026-1034
103. 3 whiskers on iron. J Electrochem Soc 114 (1967) 1228-1230
104. Kofstad P. Defect and transport properties in metal oxides. Oxid Met 44 (1995) 3-27
105. 2. Solid State Ionics 117 (1999) 21-25
106. 3. Solid State Ionics 100 (1997) 201-209
107. Norby T. Protonic defects in oxides and their possible role in high temperature oxidation. J Phys IV C9 3 (1993) 99-106
108. 3. J Eur Ceram Soc 23 (2003) 3059-3070
109. Dieckmann R. Solution and transport of water in oxides. Mater High Temp 22 (2005) 93-103
110. Kröger F.A., and Vink H.J. Relations between the concentrations of imperfections in crystalline solids. Solid State Phys - Adv Res Appl 3 (1956) 307-435
111. 3. J Am Ceram Soc 65 (1982) 162-166
112. Pint B.A., More K.L., and Wright I.G. The use of two reactive elements to optimize oxidation performance of alumina-forming alloys. Mater High Temp 20 (2003) 129-140
113. 3 as a solid electrolyte. Solid State Ionics 162-163 (2003) 135-145
114. Fukatsu N., Kurita N., Oka Y., and Yamamoto S. Incorporation of hydrogen into magnesium-doped α-alumina. Solid State Ionics 162-163 (2003) 147-159
115. Norby T., and Kofstad P. High Temp High Pressures 12 (1984) 189
116. 3 at atmospheric pressure under dehydrating/ hydrating conditions. Appl Surf Sci 181 (2001) 255-264
117. Galerie A. Private communication.
118. 3. I. High temperatures (>1000 °C). Solid State Ionics 69 (1994) 127-136
119. 3. II. Reduced temperatures (<1000 °C). Solid State Ionics 69 (1994) 137-143
120. 3. Solid State Ionics 177 (2006) 1767-1770
121. 1-δO. Solid State Ionics 141-142 (2001) 289-293
122. Minervini L., and Grimes R.W. Defect clustering in wüstite. J Phys Chem Solids 60 (1999) 235-245
123. Dieckmann R. Point defects and transport in non-stoichiometric oxides: solved and unsolved problems. J Phys Chem Solids 59 (1998) 507-525
124. Gómes-Garci{dotless}́a D., Domi{dotless}́nguez-Rodri{dotless}́guez A., Castaing J., and Millot F. The influence of oxygen partial pressure on creep recovery in magnetite single crystals. J Phys Chem Solids 63 (2002) 185-191
125. 3-ε). Philos Mag A 68 (1993) 725-745
126. Haugsrud R. On the high temperature oxidation of nickel. Corrosion Sci 45 (2003) 211-235
127. Renusch D., and Schütze M. Experience with the use of the acoustic emission techniques for monitoring scale failure in wet and dry environments. Mater High Temp 22 (2005) 34-45
128. Hughes A, Dooley RB, Paterson S. Oxide exfoliation of 347HFG in high-temperature boilers. In: Paper presented at the 7th international conference and exhibition on operating pressure equipment; 2003.
129. Dooley RB. Opening remarks at the EPRI-NPL workshop on scale growth and exfoliation in steam plant. National Physical Laboratory; 2003.
130. Evans H.E. Stress effects in high temperature corrosion. Int Mater Rev 40 (1995) 1-40
131. Schütze M. Protective oxide scales and their breakdown (1997), Wiley, Chichester
132. Lipkin D.M., Clarke D.R., Hollatz M., Bobeth M., and Pompe W. Stress development in alumina scales formed upon oxidation of (1 1 1) NiAl single crystals. Corrosion Sci 39 2 (1997) 231-242
133. Tolpygo V.K., and Clarke D.R. Microstructural study of the theta-alpha transformation in alumina scales. Mater High Temp 17 (2000) 59-69
134. Nishimura N., Komai N., and Hirayama Y. Japanese experience with steam oxidation of advanced heat-resistant steel tubes in power boilers. Mater High Temp 22 (2005) 3-10
135. 2O. Corrosion Eng, Sci Technol 39 (2004) 157-166
136. Donchev A., Fietzek H., Kolarik V., Renusch D., and Schütze M. The effect of water vapor in increasing growth stresses in the oxide scale on martensitic steam plant alloys. Mater High Temp 22 (2005) 139-146
137. Garcia Vargas M.J., Lelait L., Kolarik V., Fietzek H., and Juez-Lorenzo M. The effect of water vapour on the oxidation of stainless steels studied in situ by X-ray diffraction. Mater Sci Forum 461-464 (2004) 823-830
138. Evans H.E. Spallation models and their relevance to steam-grown oxides. Mater High Temp 22 (2005) 155-166
139. Osgerby S., Berriche-Bouhanek K., and Evans H.E. Tensile cracking of a chromia layer on a stainless steel during thermal cycling with hold periods. Mater Sci Eng A 412 (2005) 182-190
140. Evans H.E., Osgerby S., and Saunders S.R.J. Oxide integrity under isothermal and thermal cycling conditions: the influence of substrate creep. In: Tortorelli P.E., Wright I.G., and Hou P.Y. (Eds). John Stringer symposium on high temperature corrosion (2002), ASM
141. Tolpygo V.K., and Clarke D.R. Tensile cracking during thermal cycling of alumina films formed by high-temperature oxidation. Acta Mater 47 13 (1999) 3589-3605
142. Mater High Temp; 1994. p. 12.
143. Freiman S.W. Effect of environment on fracture of ceramics. Ceramurgia Int 2 (1976) 111-118
144. Grosskreutz J.C. The effect of oxide films on dislocation-surface interactions in aluminium. Surface Sci 8 (1967) 173-190
145. 2 films using a channel cracking technique. Acta Mater 52 (2004) 3621-3629
146. Otsuka N. fracture behavior of steam-grown oxide scales formed on 2-12%Cr steels. Mater High Temp 22 (2005) 131-138
147. Nagl M., Evans W.T., Hall D.J., and Saunders S.R.J. The failure of iron oxide scales at growth temperature under tensile stress. J Phys IV, Colloque C9, Supp J Phys III 3 (1993) 933-941
148. Berchtold L., Sockel H.G., and Ilschner B. The influence of deformation on the oxidation of mild steel. Behaviour of high temperature alloys in aggressive environments (1980), Metal Society, London 927-941
149. Kirchheim R., Pundt A., Al-Kassab T., Wang F., and Kluthe C. Metal/oxide interfaces and their reaction with hydrogen. Z Metallkd 94 3 (2003) 266-271
150. Huang X.Y., Mader W., and Kirchheim R. Hydrogen and oxygen at metal/oxide interfaces. Acta Metall Mater 39 5 (1991) 893-907
151. 2 interfaces. Phys Rev B 68 (2003) 125403-1-125403-8
152. Backhaus-Ricoult M., Samet L., Thomas M., Trichet M.-F., and Imhoff D. Changes in Cu-silica interfacial chemistry with oxygen chemical potential. Acta Mater 50 (2002) 4191-4204
153. Hou P.Y., and Saunders S.R.J. A survey of test methods for scale adhesion measurement. Mater High Temp 22 (2005) 121-129
154. Evans U.R. An introduction to metallic corrosion (1948), Edward Arnold, London p 194-195
155. McCartney L.N. Modelling scale failure in tension (fracture and spallation). Mater High Temp 22 (2005) 167-177
156. Software system 'PREDICT' which is a specific module of CoDA (see http://www.npl.co.uk/npl/cmmt/cog/coda.html).
157. Schütze M. Modelling oxide scale fracture. Mater High Temp 22 (2005) 147-154
158. Schütze M. An approach to a global model of the mechanical behaviour of oxide scales. Mater High Temp 12 2/3 (1994) 237-247
159. Wright IG, Schütze M, Paterson SR, Tortorelli PF, Dooley RB. Progress in prediction and control of scale exfoliation on superheater and reheater alloys. In: Proceedings of EPRI international conference on boiler tube and HRSG tube failures and inspections; 2004.