The use of two reactive elements to optimize oxidation performance of alumina-forming alloys

Materials at High Temperatures

Volumn 20, Issue 3, 2003, Pages 375-386

  Pint, B A ^a   More, K L ^a   Wright, I G ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

Alumina scales; Reactive elements additions

Indexed keywords

AIRCRAFT ENGINES; CORROSION RESISTANCE; CREEP; DOPING (ADDITIVES); GRAIN BOUNDARIES; OXIDATION; SEGREGATION (METALLOGRAPHY); TRANSMISSION ELECTRON MICROSCOPY;

ALUMINA SCALES; CREEP STRENGTH; DOPANTS; REACTIVE ELEMENTS (RE) ADDITIONS;

ALUMINA;

EID: 10644249247     PISSN: 09603409     EISSN: None     Source Type: Journal    
DOI: 10.1179/mht.2003.044     Document Type: Article

References (40)

1. Whittle, D. P. and Stringer, J., Improvement in properties: Additives in oxidation resistance. Philos. Trans. R. Soc. London, A, 295, 309-29 (1980)
2. Lang, E. (Ed.). The Role of Active Elements in the Oxidation Behavior of High Temperature Metals and Alloys. Elsevier Applied Science, London (1989).
3. King, W. E. (Ed.), Mater. Sci. Forum, Vol. 43. The Reactive Element Effect on High Temperature Oxidation - After Fifty Years. Trans Tech Publications, Winterthur, Switzerland (1989).
4. Moon, D. P. Role of reactive elements in alloy protection. Mater. Sci. Technol , 5, 754-64 (1989).
5. Strawbridge, A. and Hou, P. Y. The role of reactive elements in oxide scale adhesion. Mater. High Temp., 12, 177-81 (1994).
6. Pint, B. A. Experimental observations in support of the dynamic segregation theory to explain the reactive element effect. Oxid. Met., 45, 1-37 (1996).
7. Pint, B A Progress in understanding the reactive element effect since the Whittle and Stringer literature review, in Proceedings of the John Stringer Symposium P F, Tortorelli and P Y. Hou (eds). ASM, Materials Park. OH, in press.
8. Pint, B A. Optimization of reactive element additions to improve oxidation performance of alumina-forming alloys. J. Am. Ceram. Soc., 86, 686-695 (2003).
9. Pint, B. A., Tortorelli, P F., and Wright, I. G., Effect of cycle frequency on high temperature oxidation behavior of alumina-forming alloys. Oxid. Met., 58, 73-101 (2002)
10. More, K. L , Coffey, D W., Pint, B. A., Trent, K. S and Tortorelli, P. F TEM specimen preparation of oxidized Ni-based alloys using the focused ion beam (FIB) technique. (Paper presented at Microscopy and Microanalysis 2000, Philadelphia, PA, August 2000).
11. www.EmiSpec.com
12. Furdanowicz, W., Garratt-Reed, A. J. and Vander Sande, J. B Measurements of beam-broadening in samples observed with a FEG-STEM. Inst Phys Conf. Ser No. 119: Sec 10, 437-141 (1991).
13. Pint, B. A. and Wright, I. G., Cyclic oxidation behavior of cast NiCrAl alloys. In: High Temperature Corrosion and Materials Chemistry. Proc. Vol.98-9. P. Y Hou, M. J. McNallan, R. Oltra, E. J. Opila and D A. Shores (eds) Electrochem. Soc., Pennington. NJ. pp.263-74 (1998).
14. Evans, H. E., Nicholls, J. R. and Saunders, S. R. J., The influence of diffusion-related mechanisms in limiting oxide-scale failure. Solid State Phenom., 41, 137-56 (1995).
15. Wright, I. G., Pint, B. A., Hall, L. M and Tortorelli, P. F. Experimental results and modeling related to oxidation lifetimes. In: Lifetime Modelling of High Temperature Corrosion Processes. M. Schütze, W. J. Quadakkers and J. R. Nicholls (eds) Maney, London, pp 339-58 (2001).
16. Haynes, J. A., Pint, B. A., Porter, W D and Wright, I. G Relationships between thermal expansion and oxidation behavior of various superalloys and high-temperature coating materials. Mater. High Temp (submitted).
17. Doychak, J., Unpublished research. NASA Lewis Research Center, Cleveland, OH, 1994.
18. Pint, B A., Wright, I. G., Lee, W. Y., Zhang, Y., Prüßner, K. and Alexander, K. B. Substrate and bond coat compositions: Factors affecting alumina scale adhesion. Mater. Sci. Eng., A245, 201-211 (1998).
19. Pint, B. A., More, K. L., Wright, I. G. and Tortorelli, P. F., Characterization of thermally cycled alumina scales. Mater. High Temp., 17, 165-71 (2000).
20. Pint, B. A., More, K. L. and Wright, I. G. The effect of quaternary additions on the oxidation behavior of Hf-doped NiAl. Oxid. Met., 59, 257-83 (2003).
21. Pint, B. A., More, K. L. and Tortorelli, P. F., The effect of water vapor on oxidation performance of alloys used in recuperators, ASME Paper #2002-GT-30543, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Amsterdam, Netherlands, June 3-6, 2002.
22. Doychak, J. and Rühle, M. TEM studies of oxidized NiAl and Ni3Al cross sections. Oxid. Met., 31, 431-52 (1989).
23. 3 scales formed on oxide dispersion strengthened alloys. Oxid. Met., 56, 121-47 (2001).
24. Hagel, W. C. The oxidation of iron, nickel and cobalt-base alloys containing aluminum. Corr., 21, 316-26 (1965).
25. 3 transformation on the oxidation behavior of β-NiAl+Zr. Oxid. Met., 31, 275-304 (1989).
26. Pint, B. A., More, K. L., Tortorelli, P F., Porter, W. D. and Wright, I. G., Optimizing the imperfect oxidation performance of iron aluminides Mater. Sci. Forum, 369-372, 411-8 (2001).
27. 3 scales containing oxide dispersions. J. Electrochem. Soc., 129, 1147-9 (1982).
28. Pint, B. A., Garratt-Reed, A. J and Hobbs, L W. The reactive element effect in commercial ODS FeCrAl alloys. Mater. High Temp., 13, 3-16 (1995).
29. 3 grain boundaries. J. Am. Ceram. Soc., 81, 305-14 (1998).
30. Sigler, D. R. Aluminum oxide adherence on Fe-Cr-Al alloys modified with group IIIB, IVB, VB, and VIB elements. Oxid. Met., 32, 337-55 (1989).
31. Smialek, J. L., Jayne, D. T., Schaeffer, J. C. and Murphy W. H. Effects of hydrogen annealing, sulfur segregation and diffusion on the cyclic oxidation resistance of superalloys. A review. Thin Solid Films, 253, 285-92 (1994).
32. Sarioglu, C., Stinner, C., Blachere, J. R., Birks, N., Pettit, F. S. and Meter, G. H. The control of sulfur content in nickel-base single crystal superalloys and its effects on cyclic oxidation resistance. In. Superalloys 1996. R. D. Kissinger, D. J. Deye, D. L. Anton, A. D. Cetel, M. V. Nathal, T M. Pollack, D A. Woodford (eds) TMS, Warrendale, PA, pp.71-80 (1996).
33. Wright, I. G. and Pint, B. A. Some effects of interactions among minor element additions on the high-temperature oxidation behavior of Ni-base alumina-forming alloys. In: Proc. SF2M 2000, Journées d'automne, Société Française de Métallurgie et de Matériaux, Paris, pp.86-87 (2000)
34. Smialek, J. L. and Pint, B. A. Optimizing scale adhesion for single crystal superalloys. Mater. Sci. Forum, 369-372, 459-66 (2001).
35. 3. J. Am Ceram. Soc., 80, 2005-12 (1997).
36. Kuenzly, J. D. and Douglass, D. L. The oxidation mechanism of Ni3Al containing yttrium. Oxid. Met., 8, 139-178 (1974).
37. Prußner, K. and Alexander, K. B. Unpublished research, Oak Ridge National Laboratory, Oak Ridge, TN, 1998.
38. 3Al matrix composites. Ceram Trans., 19, 961-8(1991).
39. Quadakkers, W. J., Nicholls, J., Naumenko, D., Wilber, J and Singheiser, L. Factors affecting oxide growth rates and lifetime of FeCrAl alloys. In: Materials Aspects in Automotive Catalytic Converters. (Ed. H. Bode) Wiley-VCH, Weinheim, Germany. pp.93-105 (2002).
40. Wilber, J. P., Bennett, M. J. and Nicholls, J. R., Life-time extension of alumina forming FeCrAl-RE alloys: Influence of alloy thickness. Mater. High Temp., 17, 125-32 (2000).