Encapsulation of Lysozyme into halloysite nanotubes and dispersion in PLA: Structural and physical properties and controlled release analysis

European Polymer Journal

Volumn 93, Issue , 2017, Pages 495-506

  Bugatti, Valeria ^a   Sorrentino, Andrea ^b   Gorrasi, Giuliana ^a  

^a UNIVERSITY OF SALERNO   (Italy)

^b CNR   (Italy)

Author keywords

Ball milling; Controlled release; Halloysite; Lysozyme; PLA

Indexed keywords

BALL MILLING; ENZYMES; KAOLINITE; MILLING (MACHINING); NANOTUBES; PHYSICAL PROPERTIES; YARN;

BIODEGRADABLE COMPOSITES; CONTROLLED RELEASE; HALLOYSITE; HALLOYSITE NANOTUBE (HNTS); HALLOYSITE NANOTUBES; MECHANICAL AND BARRIERS; STRUCTURAL AND PHYSICAL PROPERTIES; STRUCTURAL ORGANIZATION;

THERMOGRAVIMETRIC ANALYSIS;

EID: 85021098131     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2017.06.024     Document Type: Article

References (56)

1. Mastromatteo, M., Conte, A., Del Nobile, M.A., Advances in controlled release devices for food packaging applications. Trends Food Sci. Technol. 21:12 (2010), 591–598.
2. Appendini, P., Hotchkiss, J.H., Review of antimicrobial food packaging. Innovative Food Sci. Emerg. Technol. 3:2 (2002), 113–126.
3. Min, S., Krochta, J.M., Inhibition of Penicillium commune by edible whey protein films incorporating Lactoferrin Lacto-ferrin Hydrolysate, and Lactoperoxidase systems. J. Food Sci. 70:2 (2005), M87–M94.
4. Ozer, B.B.P., Uz, M., Oymaci, P., Altinkaya, S.A., Development of a novel strategy for controlled release of lysozyme from whey protein isolate based active food packaging films. Food Hydrocolloid. 61 (2016), 877–886.
5. R. Ribeiro-Santos, A. Sanches-Silva, J. Fagundes Gomes Motta, M. Andrade, I. de Araújo Neves, Reinaldo F. Teófilo, M. Geraldo de Carvalho, N. Ramos de Melo, Combined use of essential oils applied to protein base active food packaging: study in vitro and in a food simulant, Eur. Polym. J. http://dx.doi.org/10.1016/j.eurpolymj.2017.03.055 (2017).
6. James, S., McManus, J.J., Thermal and solution stability of lysozyme in the presence of sucrose, glucose, and trehalose. J. Phys. Chem. B 116:34 (2012), 10182–10188.
7. Venkataramani, S., Truntzer, J., Coleman, D.R., Thermal stability of high concentration lysozyme across varying pH: a fourier transform infrared study. J. Pharm. Bioallied Sci. 5:2 (2013), 148–153.
8. Mocanu, G., Mihai, D., LeCerf, D., Picton, L., Muller, G., Synthesis of new associative gel microspheres from carboxymethyl pullulan and their interactions with lysozyme. Eur. Polymer J. 40 (2004), 283–289.
9. Losso, J.N., Nakai, S., Charter, E.A., Lysozyme in Natural Food Antimicrobial Systems, 2000, CRC Press LLC, Boca Raton, FL, 185–210 Chapter 6.
10. Conte, A., Buonocore, G.G., Bevilacqua, A., Sinigaglia, M., Del Nobile, M.A., Immobilization of lysozyme on polyvinylalcohol films for active packaging applications. J. Food Prot. 69:4 (2006), 866–870.
11. Edwards, J.V., Prevost, N., Condon, B., Sethumadhavan, K., Ullah, J., Bopp, A., Immobilization of lysozyme on cotton fabrics: synthesis, characterization, and activity. AATCC Rev. 11:3 (2011), 73–79.
12. Muriel-Galet, V., Talbert, J.N., Hernandez-Munoz, P., Gavara, R., Goddard, J.M., Covalent immobilization of lysozyme on ethylene vinyl alcohol, films for non-migrating antimicrobial packaging applications. J. Agric. Food Chem. 61 (2013), 6720–6727.
13. Wang, Y., Liu, C., Zhang, Y., Zhang, B., Liu, J., Facile fabrication of flowerlike natural nanotube/layered double hydroxide composites as effective carrier for lysozyme immobilization. ACS Sustain. Chem. Eng. 3 (2015), 1183–1189.
14. Mastromatteo, M., Lecce, L., De Vietro, N., Favia, P., Del Nobile, M.A., Plasma deposition processes from acrylic/methane on natural fibres to control the kinetic release of lysozyme from PVOH monolayer film. J. Food Eng. 104:3 (2011), 373–379.
15. Min, S., Rumsey, T.R., Krochta, J.M., Diffusion of the antimicrobial lysozyme from a whey protein coating on smoked salmon. J. Food Eng. 84:1 (2008), 39–47.
16. Buonocore, G.G., Del Nobile, M.A., Panizza, A., Corbo, M.R., Nicolais, L., A general approach to describe the antimicrobial agent release from highly swellable films intended for food packaging applications. J. Control. Release 90:1 (2003), 97–107.
17. Buonocore, G.G., Sinigaglia, M., Corbo, M.R., Bevilacqua, A., La Notte, E., Del Nobile, M.A., Controlled release of antimicrobial compounds from highly swellable polymers. J. Food Prot. 67:6 (2004), 1190–1194.
18. Fajardo, P., Balaguer, M.P., Gomez-Estaca, J., Gavara, R., Hernandez-Munoz, P., Chemically modified gliadins as sustained release systems for lysozyme. Food Hydrocolloids 41 (2014), 53–59.
19. Conte, A., Buonocore, G.G., Nicolais, L., Del Nobile, M.A., Controlled release of active compounds from antimicrobial films intended for food packaging applications. Ital. J. Food Sci. 15 (2003), 216–218.
20. Benelhadj, S., Fejji, N., Degraeve, P., Attia, H., Ghorbel, D., Gharsallaoui, A., Properties of lysozyme/Arthrospira platensis (Spirulina) protein complexes for antimicrobial edible food packaging. Algal Res. 15 (2016), 43–49.
21. Mendes de Souza, P., Fernandez, A., Lopez-Carballo, G., Gavara, R., Hernandez- Munoz, P., Modified sodium caseinate films as releasing carriers of lysozyme. Food Hydrocolloids 24:4 (2010), 300–306.
22. Yuan, P., Tan, D., Annabi-Bergaya, F., Properties and applications of halloysite nanotubes: recent research advances and future prospects. Appl. Clay Sci. 112–113 (2015), 75–93.
23. Lvov, Y., Wang, W., Zhang, L., Fakhrullin, R., Halloysite clay nanotubes for loading and sustained release of functional compounds. Adv. Mater. 28 (2016), 1227–1250.
24. Lvov, Y., Abdullayev, E., Green and functional polymer-clay nanotube composites with sustained release of chemical agents. Prog. Polym. Sci., 2013, 10.1016/j.progpolymsci.2013.05.009.
25. Lvov, Y., Shchukin, D., Möhwald, H., Price, R., Clay nanotubes for controlled release of protective agents – perspectives. ACS Nano 2 (2008), 814–820.
26. Arcudi, F., Cavallaro, G., Lazzara, G., Massaro, M., Milioto, S., Noto, R., Riela, S., Selective functionalization of halloysite cavity by click reaction: structured filler for enhancing mechanical properties of bionanocomposite films. J. Phys. Chem., 2014, 10.1021/jp504388e.
27. Gorrasi, G., Pantani, R., Murariu, M., Dubois, P., PLA/Halloysite nanocomposite films: water vapor barrier properties and specific key characteristics. Macr. Mat. Eng. 299 (2014), 104–115, 10.1002/mame.201200424.
28. Liu, M., Jia, Z., Jia, D., Zhou, C., Recent advance in research on halloysite-nanotubes polymer nanocomposites. Prog. Polym. Sci. 39 (2014), 1498–1525.
29. Abdullayev, E., Lvov, Y., Clay nanotubes for corrosion inhibitor encapsulation: release control with end stoppers. J. Mater. Chem. 20 (2010), 6681–6687.
30. Abdullayev, E., Lvov, Y., Clay nanotubes for controlled release of protective agents – a review. J. Nanosci. Nanotechnol. 11 (2011), 10007–10026.
31. Abdullayev, E., Price, R., Shchukin, D., Lvov, Y., Halloysite tubes as nanocontainers for anticorrosion coating with benzotriazole. Appl. Mater. Interfaces. 2 (2009), 1437–1442.
32. Abdullayev, E., Shchukin, D., Lvov, Y., Halloysite clay nanotubes as a reservoir for corrosion inhibitors and template for layer-by-layer encapsulation. Mater. Sci. Eng. 99 (2008), 331–332.
33. Gorrasi, G., Vertuccio, L., Evaluation of zein/halloysite nano-containers as reservoirs of active molecules for packaging applications: preparation and analysis of physical properties. J. Cereal Sci. 70 (2016), 66–71.
34. Veerabadran, N., Price, R., Lvov, Y., Clay nanotubes for encapsulation and sustained release of drugs. Nano. 2 (2007), 215–222.
35. Lvov, Y., Price, R., Halloysite Nanotubules a Novel Substrate for the Controlled Delivery of Bioactive Molecules. Ruiz-Hitzky, E., Ariga, K., Lvov, Y., (eds.) Bio-Inorganic Hybrid Nanomaterials, 2008, Wiley, London/Berlin, 440–478.
36. Liu, M., Dai, L., Shi, H., Xiong, S., Zhou, C., In vitro evaluation of alginate/halloysite nanotube composite scaffolds for tissue engineering. Mater. Sci. Eng., C 49 (2015), 700–712.
37. Tully, J., Yendluri, R., Lvov, Y., Halloysite clay nanotubes for enzyme immobilization. Biomacromol 17 (2016), 615–621.
38. Zhai, R., Zhang, B., Liu, L., Xie, Y., Zhang, H., Liu, J., Immobilization of enzyme biocatalyst on natural halloysite nanotubes. Catal. Commun. 12 (2010), 259–263.
39. Sun, J., Yendluri, R., Liu, K., Guo, Y., Lvov, Y., Yan, X., Enzyme-immobilized clay nanotube-chitosan membranes with sustainable biocatalytic activities. Phys. Chem. Chem. Phys. 19 (2017), 562–567.
40. R. Auras, L.T. Lim, S.E.M. Selke, H. Tsuji, Poly (Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications, Editor(s). DOI: 10.1002/9780470649848.
41. Gorrasi, G., Pantani, R., Hydrolysis and biodegradation of Poly (Lactic acid). Adv. Polym. Sci., 2017, 10.1007/12_2016_12.
42. Prashantha, K., Lecouvet, B., Sclavons, M., Lacrampe, M.F., Krawczak, P., Poly(lactic acid)/halloysite nanotubes nanocomposites: structure, thermal, and mechanical properties as a function of halloysite treatment. J. Appl. Polym. Sci. 128:3 (2013), 1895–1903.
43. Yu, D., Jordan, M., Hazim, H., Mohammadzadehmoghadam, S., Liu, D., Qi, X., Kin-Tak, L., Polylactic acid (PLA)/halloysite nanotube (HNT) composite mats: influence of HNT content and modification. Compos. A Appl. Sci. Manuf. 76 (2015), 28–36.
44. Stoclet, G., Sclavons, M., Lecouvet, B., Devaux, J., Van Velthem, P., Boborodea, A., Bourbigot, S., Sallem-Idrissi, N., Elaboration of poly(lactic acid)/halloysite nanocomposites by means of water assisted extrusion: structure, mechanical properties and fire performance. RSC Adv. 4:101 (2014), 57553–57563.
45. Del Nobile, M.A., Conte, A., Buonocore, G.G., Incoronato, A.L., Massaro, A., Panza, O., Active packaging by extrusion processing of recyclable and biodegradable polymers. J. Food Eng. 93 (2009), 1–6.
46. Gorrasi, G., Sorrentino, A., Mechanical milling as a technology to produce structural and functional bio-nanocomposites. Green Chem. 17 (2015), 2610–2625.
47. Delogu, F., Gorrasi, G., Sorrentino, A., Fabrication of polymer nanocomposites via ball milling: present status and future perspectives. Prog. Mater. Sci. 86 (2017), 75–126.
48. R.M. Felder, G.S. Huvard, Methods of experimental physics, in: C.R. Fava (Eds), Academic Press, New York, NY, 1980, (vol. 16) pp. 315–318.
49. Gorrasi, G., Dispersion of halloysite loaded with natural antimicrobials intopectins: Characterization and controlled release analysis. Carbohyd. Polym. 127 (2015), 47–53.
50. G. Gorrasi, G. Attanasio, L. Izzo, A. Sorrentino, Controlled release mechanisms of sodium benzoate from a biodegradable polymer and halloysite nanotube composite, Polym. Int. DOI: 10.1002/pi.5309.
51. Horvath, E., Frost, R.L., Mako, E., Kristof, J., Cseh, T., Thermal treatment of mechano-chemically activated kaolinite. Thermochimica Acta. 404 (2003), 227–235.
52. Gorrasi, G., Anastasio, R., Bassi, L., Pantani, R., Barrier properties of PLA to water vapour: effect of temperature and morphology. Macromol. Res. 21:10 (2013), 1110–1117.
53. Gorrasi, G., Pantani, R., Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: assessment of structural modification and kinetic parameters. Polym. Degrad. Stab. 98:5 (2013), 1006–1014.
54. W.J. Koros, S.K. Burgess, Z. Chen, Polymer Transport Properties, DOI: 10.1002/0471440264.pst376.pub2.
55. Gorrasi, G., Tortora, M., Vittoria, V., Pollet, E., Lepoittevin, B., Alexandre, M., Dubois, P., Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion. Polymer 44:8 (2003), 2271–2279.
56. Gallagher, K.M., Corrigan, O.I., Mechanistic aspects of the release of levamisole hydrochloride from biodegradable polymers. J. Control. Release 69:2 (2000), 261–272.