Fabrication of polymer nanocomposites via ball milling: Present status and future perspectives

Progress in Materials Science

Volumn 86, Issue , 2017, Pages 75-126

  Delogu, Francesco ^a   Gorrasi, Giuliana ^b   Sorrentino, Andrea ^c  

^a UNIVERSITY OF CAGLIARI   (Italy)

^b UNIVERSITY OF SALERNO   (Italy)

^c CNR   (Italy)

Author keywords

Mechanical milling; Morphological analysis; Physical properties; Polymer nanocomposites

Indexed keywords

BALL MILLING; MECHANICAL ALLOYING; MILLING (MACHINING); NANOCOMPOSITES; PHYSICAL PROPERTIES;

EXPERIMENTAL METHODOLOGY; MECHANICAL ACTIVATION; MECHANICAL MILLING; MECHANICAL PROCESSING; MORPHOLOGICAL ANALYSIS; POLYMER NANOCOMPOSITE; STRUCTURE PROPERTY RELATIONSHIPS; THERMOSETTING POLYMERS;

POLYMERS;

EID: 85010285105     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2017.01.003     Document Type: Review

References (314)

1. [1] Lowndes, D.H., Alivisatos, A.P., Alper, M., Averback, R.S., Jacob Barhen, J., Eastman, J.A., et al. Nanoscale Sci Eng Technol Res Dir, 1999, 10.2172/899254.
2. [2] Hemminger, J., Fleming, G., Ratner, M., Direct Matter Energy: Five Challenges Sci Imag, 2007, 10.2172/935427.
3. [3] Dum, R., Science of complex systems for tackling challenges of the 21st century: a brief overview. Eur Manage Rev 4 (2007), 73–76, 10.1057/palgrave.emr.1500080.
4. [4] Winey, K.I., Vaia, R.A., Polymer nanocomposites. MRS Bull 32 (2007), 314–322.
5. [5] Moriarty, P., Nanostructured materials. Reports Prog Phys 64 (2001), 297–381, 10.1088/0034-4885/64/3/201.
6. [6] Olah GA. Handbook of nanostructured materials and nanotechnology. Elsevier; 2000. http://dx.doi.org/10.1016/B978-012513760-7/50000-9.
7. [7] Yin, Y., Talapin, D., The chemistry of functional nanomaterials. Chem Soc Rev, 42, 2013, 2484, 10.1039/c3cs90011h.
8. [8] Vaia, R.A., Jandt, K.D., Kramer, E.J., Giannelis, E.P., Microstructural evolution of melt intercalated polymer−organically modified layered silicates nanocomposites. Chem Mater 8 (1996), 2628–2635, 10.1021/cm960102h.
9. [9] Krishnamoorti, R., Vaia, R.A., Giannelis, E.P., Structure and dynamics of polymer-layered silicate nanocomposites. Chem Mater 8 (1996), 1728–1734, 10.1021/cm960127g.
10. [10] Chawla, K.K., Composite materials. 2012, Springer, New York, New York, NY.
11. [11] Hu, N., (eds.) Composites and their properties, 2012, InTech, 10.5772/2816.
12. [12] Vaia, R.A., Ishii, H., Giannelis, E.P., Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates. Chem Mater 5 (1993), 1694–1696, 10.1021/cm00036a004.
13. [13] Krishnamoorti, R., Vaia, R.A., Polymer nanocomposites: synthesis, characterization, and modeling, vol. 804, 2002, American Chemical Society Washington, DC.
14. [14] Twardowski, T.E., Introduction to nanocomposite materials: properties, processing, characterization. 2007, Destech Publications, Incorporated.
15. [15] Hussain, F., Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater 40 (2006), 1511–1575, 10.1177/0021998306067321.
16. [16] Vaia, R.A., Maguire, J.F., Polymer nanocomposites with prescribed morphology: going beyond nanoparticle-filled polymers. Chem Mater 19 (2007), 2736–2751.
17. [17] Pavlidou, S., Papaspyrides, C.D., A review on polymer–layered silicate nanocomposites. Prog Polym Sci 33 (2008), 1119–1198, 10.1016/j.progpolymsci.2008.07.008.
18. [18] Reddy, B., (eds.) Advances in diverse industrial applications of nanocomposites, 2011, InTech 10.5772/1931.
19. [19] LeBaron, P., Wang, Z., Pinnavaia, T., Polymer-layered silicate nanocomposites: an overview. Appl Clay Sci, 1999.
20. [20] Gorrasi, G., Milone, C., Piperopoulos, E., Lanza, M., Sorrentino, A., Hybrid clay mineral-carbon nanotube-PLA nanocomposite films. Preparation and photodegradation effect on their mechanical, thermal and electrical properties. Appl Clay Sci 71 (2013), 49–54, 10.1016/j.clay.2012.11.004.
21. [21] Sinha Ray, S., Okamoto, M., Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28 (2003), 1539–1641, 10.1016/j.progpolymsci.2003.08.002.
22. [22] Alexandre, M., Dubois, P., Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R Reports 28 (2000), 1–63, 10.1016/S0927-796X(00)00012-7.
23. [23] Sorrentino, A., Tortora, M., Vittoria, V., Diffusion behavior in polymer-clay nanocomposites. J Polym Sci, Part B: Polym Phys 44 (2006), 265–274, 10.1002/polb.20684.
24. [24] Sorrentino, A., Gorrasi, G., Tortora, M., Vittoria, V., Barrier properties of polymer/clay nanocomposites. Yiu-Wing Mai, Z.-Z.Y., (eds.) Polym. Nanocomposites, 2006, Elsevier, Cambridge England, 273–296, 10.1533/9781845691127.1.273.
25. [25] Gorrasi, G., Sorrentino, A., Photo-oxidative stabilization of carbon nanotubes on polylactic acid. Polym Degrad Stab 98 (2013), 963–971, 10.1016/j.polymdegradstab.2013.02.012.
26. [26] Sorrentino, A., Gorrasi, G., Vittoria, V., Environmental silicate nano-biocomposites, vol. 50, 2012, Springer, London, London.
27. [27] Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., Chung, T.C., Polypropylene/montmorillonite nanocomposites. Review of the synthetic routes and materials properties. Chem Mater 13 (2001), 3516–3523, 10.1021/cm0110627.
28. [28] Ma, P.-C., Siddiqui, N.a., Marom, G., Kim, J.-K., Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos Part A Appl Sci Manuf 41 (2010), 1345–1367, 10.1016/j.compositesa.2010.07.00.
29. [29] Giannelis, E.P., Krishnamoorti, R., Manias, E., Polymer-silicate nanocomposites: model systems for confined polymers and polymer brushes. Granick, S., Binder, K., Gennes, P.-G., Giannelis, E.P., Grest, G.S., Hervet, H., et al. (eds.) Polym. Confin. Environ. SE - 3, vol. 138, 1999, Springer, Berlin Heidelberg, 107–147, 10.1007/3-540-69711-X_3.
30. [30] Iyer, K.A., Torkelson, J.M., Importance of superior dispersion versus filler surface modification in producing robust polymer nanocomposites: the example of polypropylene/nanosilica hybrids. Polymer (Guildf) 68 (2015), 147–157, 10.1016/j.polymer.2015.05.015.
31. [31] Hotze, E.M., Phenrat, T., Lowry, G.V., Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment. J Environ Qual, 39, 2010, 1909, 10.2134/jeq2009.0462.
32. [32] Schmid G, ed. Nanoparticles: from theory to application, 2nd, Completely revised and updated edition. Wiley-VCH Verlag GmbH & Co. KGaA; 2010.
33. [33] Sorrentino, A., Pantani, R., Brucato, V., Injection molding of syndiotactic polystyrene/clay nanocomposites. Polym Eng Sci 46 (2006), 1768–1777.
34. [34] Raka, L., Sorrentino, A., Bogoeva-Gaceva, G., Isothermal crystallization kinetics of polypropylene latex-based nanocomposites with organo-modified clay. J Polym Sci, Part B: Polym Phys 48 (2010), 1927–1938, 10.1002/polb.22069.
35. [35] Liu, T., Burger, C., Chu, B., Nanofabrication in polymer matrices. Prog Polym Sci 28 (2003), 5–26, 10.1016/S0079-6700(02)00077-1.
36. [36] Ajayan, P.M., Schadler, L.S., Braun P, V., (eds.) Nanocomposite Science and Technology, 2003, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, FRG, 10.1002/3527602127.
37. [37] Gorrasi, G., Sorrentino, A., Mechanical milling as a technology to produce structural and functional bio-nanocomposites. Green Chem 17 (2015), 2610–2625, 10.1039/C5GC00029G.
38. [38] Wilberforce, S.I.J., Finlayson, C.E., Best, S.M., Cameron, R.E., The influence of the compounding process and testing conditions on the compressive mechanical properties of poly(D, L-lactide-co-glycolide)/α-tricalcium phosphate nanocomposites. J Mech Behav Biomed Mater 4 (2011), 1081–1089, 10.1016/j.jmbbm.2011.03.017.
39. [39] Costache, M.C., Wang, D., Heidecker, M.J., Manias, E., Wilkie, C.A., The thermal degradation of poly(methyl methacrylate) nanocomposites with montmorillonite, layered double hydroxides and carbon nanotubes. Polym Adv Technol 17 (2006), 272–280, 10.1002/pat.697.
40. [40] Sorrentino, A., Gorrasi, G., Vittoria, V., Potential perspectives of bio-nanocomposites for food packaging applications. Trends Food Sci Technol 18 (2007), 84–95, 10.1016/j.tifs.2006.09.004.
41. [41] Moreira, F.K.V., Marconcini, J.M., Mattoso, L.H.C., Solid state ball milling as a green strategy to improve the dispersion of cellulose nanowhiskers in starch-based thermoplastic matrices. Cellulose 19 (2012), 2049–2056, 10.1007/s10570-012-9768-3.
42. [42] Ishida, T., Tamaru, S., Mechanical alloying of polymer/metal systems. J Mater Sci Lett 12 (1993), 1851–1853, 10.1007/BF00540008.
43. 2 nanocomposites prepared by cryomilling. J Polym Sci, Part B: Polym Phys 44 (2006), 1161–1167, 10.1002/polb.20780.
44. [44] Sorrentino, A., Gorrasi, G., Tortora, M., Vittoria, V., Costantino, U., Marmottini, F., et al. Incorporation of Mg–Al hydrotalcite into a biodegradable Poly(ε-caprolactone) by high energy ball milling. Polymer (Guildf) 46 (2005), 1601–1608, 10.1016/j.polymer.2004.12.018.
45. [45] Grigorieva, T.F., Barinova, a.P., Lyakhov, N.Z., Mechanosynthesis of nanocomposites. J Nanoparticle Res 5 (2003), 439–453, 10.1023/B:NANO.0000006093.26430.3b.
46. [46] Koch, C.C., The synthesis and structure of nanocrystalline materials produced by mechanical attrition: a review. Nanostruct Mater 2 (1993), 109–129, 10.1016/0965-9773(93)90016-5.
47. [47] Weeber, A.W., Bakker, H., de Boer, F.R., The preparation of amorphous Ni-Zr powder by grinding the crystalline alloy. Europhys Lett 2 (1986), 445–448, 10.1209/0295-5075/2/6/006.
48. [48] Qiu, W., Endo, T., Hirotsu, T., A novel technique for preparing of maleic anhydride grafted polyolefins. Eur Polym J 41 (2005), 1979–1984, 10.1016/j.eurpolymj.2005.03.016.
49. [49] Zhang, F., Qiu, W., Yang, L., Endo, T., Hirotsu, T., Mechanochemical preparation and properties of a cellulose–polyethylene composite. J Mater Chem 12 (2002), 24–26, 10.1039/b108255h.
50. [50] Bai, C., Structural changes in poly(ethylene terephthalate) induced by mechanical milling. Polymer (Guildf) 41 (2000), 7147–7157, 10.1016/S0032-3861(00)00048-3.
51. [51] Pan, J., Shaw, W.J.D., Properties of a mechanically processed polymeric material. J Appl Polym Sci 52 (1994), 507–514, 10.1002/app.1994.070520405.
52. [52] Pan, J., Shaw, W.J.D., Effects of processing parameters on material properties of mechanically processed polyamide. J Appl Polym Sci 56 (1995), 557–566, 10.1002/app.1995.070560504.
53. [53] Jonna, S., Lyons, J., Processing and properties of cryogenically milled post-consumer mixed plastic waste. Polym Test 24 (2005), 428–434, 10.1016/j.polymertesting.2005.01.009.
54. [54] Mio, H., Kano, J., Saito, F., Scale-up method of planetary ball mill. Chem Eng Sci 59 (2004), 5909–5916, 10.1016/j.ces.2004.07.020.
55. [55] Cavalieri, F., Padella, F., Development of composite materials by mechanochemical treatment of post-consumer plastic waste. Waste Manage 22 (2002), 913–916, 10.1016/S0956-053X(02)00084-3.
56. [56] Gente, V., La Marca, F., Lucci, F., Massacci, P., Pani, E., Cryo-comminution of plastic waste. Waste Manage 24 (2004), 663–672, 10.1016/j.wasman.2004.03.005.
57. [57] Guo, X., Xiang, D., Duan, G., Mou, P., A review of mechanochemistry applications in waste management. Waste Manage 30 (2010), 4–10, 10.1016/j.wasman.2009.08.017.
58. [58] He, P., He, B., Xiao, W., Zhang, Y., Mechanochemical copolymerization of poly(vinyl chloride) with methyl methylacrylate in an open mill machine. J Vinyl Addit Technol 12 (2006), 42–48, 10.1002/vnl.20067.
59. [59] Shao, W., Wang, Q., Chen, Y., Gu, Y., Preparation and properties of polypropylene/vermiculite nanocomposite through solid-state shear compounding (S 3 C) method using pan-mill equipment. Mater Manuf Process 21 (2006), 173–179, 10.1080/AMP-200068667.
60. [60] Awasthi, K., Ball-milled carbon and hydrogen storage. Int J Hydrogen Energy 27 (2002), 425–432, 10.1016/S0360-3199(01)00134-3.
61. [61] Li, Y.B., Wei, B.Q., Liang, J., Yu, Q., Wu, D.H., Transformation of carbon nanotubes to nanoparticles by ball milling process. Carbon N Y 37 (1999), 493–497, 10.1016/S0008-6223(98)00218-8.
62. [62] Butyagin, P.Y., Kinetics and nature of mechanochemical reactions. Russ Chem Rev 40 (1971), 901–915, 10.1070/RC1971v040n11ABEH001982.
63. [63] Boldyrev, V.V., Mechanochemistry and mechanical activation of solids. Bull Acad Sci USSR Div Chem Sci 39 (1990), 2029–2044, 10.1007/BF01557732.
64. [64] Gilman, J.J., Mechanochemistry. Science (80-), 274, 1996, 65, 10.1126/science.274.5284.6.
65. [65] Beyer, M.K., Clausen-Schaumann, H., Mechanochemistry: the mechanical activation of covalent bonds. Chem Rev 105 (2005), 2921–2948, 10.1021/cr030697h.
66. [66] Baláž, P., Achimovičová, M., Baláž, M., Billik, P., Cherkezova-Zheleva, Z., Criado, J.M., et al. Hallmarks of mechanochemistry: from nanoparticles to technology. Chem Soc Rev, 42, 2013, 7571, 10.1039/c3cs35468g.
67. [67] Baláž P. Applied mechanochemistry. Mechanochem Nanosci Miner Eng SE - 6, Springer, Berlin Heidelberg; 2008, p. 297–405. http://dx.doi.org/10.1007/978-3-540-74855-7_6.
68. [68] Levitas, V., Continuum mechanical fundamentals of mechanochemistry. Vladislav Domnich, Y.G., (eds.) High Press. Surf. Sci. Eng, 2003, Taylor & Francis, 161–292, 10.1201/9781420034134.sec3.
69. [69] Stephen Berry, R., Stuart, A., Rice, J.R., Matter in equilibrium: statistical mechanics and thermodynamics. 2002, Oxford University Press, New York.
70. [70] Sheiko, S.S., Sun, F.C., Randall, A., Shirvanyants, D., Rubinstein, M., Lee, H., et al. Adsorption-induced scission of carbon–carbon bonds. Nature 440 (2006), 191–194, 10.1038/nature04576.
71. [71] Hickenboth, C.R., Moore, J.S., White, S.R., Sottos, N.R., Baudry, J., Wilson, S.R., Biasing reaction pathways with mechanical force. Nature 446 (2007), 423–427, 10.1038/nature05681.
72. [72] Davis, D.A., Hamilton, A., Yang, J., Cremar, L.D., Van Gough, D., Potisek, S.L., et al. Force-induced activation of covalent bonds in mechanoresponsive polymeric materials. Nature 459 (2009), 68–72, 10.1038/nature07970.
73. [73] Caruso, M.M., Davis, D.A., Shen, Q., Odom, S.A., Sottos, N.R., White, S.R., et al. Mechanically-induced chemical changes in polymeric materials. Chem Rev 109 (2009), 5755–5798, 10.1021/cr9001353.
74. [74] Diesendruck, C.E., Peterson, G.I., Kulik, H.J., Kaitz, J.A., Mar, B.D., May, P.A., et al. Mechanically triggered heterolytic unzipping of a low-ceiling-temperature polymer. Nat Chem 6 (2014), 623–628, 10.1038/nchem.1938.
75. [75] Seidel, C.A.M., Kühnemuth, R., Mechanochemistry: molecules under pressure. Nat Nanotechnol 9 (2014), 164–165, 10.1038/nnano.2014.46.
76. [76] Wang, J., Kouznetsova, T.B., Niu, Z., Ong, M.T., Klukovich, H.M., Rheingold, A.L., et al. Inducing and quantifying forbidden reactivity with single-molecule polymer mechanochemistry. Nat Chem 7 (2015), 323–327, 10.1038/nchem.2185.
77. [77] Suryanarayana, C., Mechanical alloying and milling. Prog Mater Sci 46 (2001), 1–184, 10.1016/S0079-6425(99)00010-9.
78. [78] Tsuji, N., Saito, Y., Lee, S.-H., Minamino, Y., ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials. Adv Eng Mater 5 (2003), 338–344, 10.1002/adem.200310077.
79. [79] Zhilyaev, A., Langdon, T., Using high-pressure torsion for metal processing: fundamentals and applications. Prog Mater Sci 53 (2008), 893–979, 10.1016/j.pmatsci.2008.03.002.
80. [80] Valiev, R.Z., Langdon, T.G., Principles of equal-channel angular pressing as a processing tool for grain refinement. Prog Mater Sci 51 (2006), 881–981, 10.1016/j.pmatsci.2006.02.003.
81. [81] Sopicka-Lizer, M., High-energy ball milling. 2010, Woodhead Publishing Limited, 10.1533/9781845699444.
82. [82] Perrin-Sarazin, F., Sepehr, M., Bouaricha, S., Denault, J., Potential of ball milling to improve clay dispersion in nanocomposites. Polym Eng Sci 49 (2009), 651–665, 10.1002/pen.21295.
83. [83] Rozenberg, B.A., Tenne, R., Polymer-assisted fabrication of nanoparticles and nanocomposites. Prog Polym Sci 33 (2008), 40–112, 10.1016/j.progpolymsci.2007.07.004.
84. [84] Eichholz, D.E., Theophrastus: De lapidibus Edited with Introduction (Trans.) Translation and Commentary, 1965, Oxford at the Clarendon Press, New York.
85. [85] Pollio, V., Vitruvii De architectura libri decem. 1912, Lipsiae in Aebidum, Lipsia.
86. [86] Bacon, R., The Opus Majus of Roger Bacon. 2010, Cambridge University Press, Cambridge.
87. [87] Agricola, G., De re metallica translated from the first latin edition of 1556. 1950, Dover Publications, Inc., New York.
88. [88] Biringuccio, V., The pirotechnia of Vannoccio Biringuccio: the classic sixteenth-century treatise on metals and metallurgy. 1990, Dover Publications, Inc., New York.
89. [89] Suavius LGJ. Theophrasti Paracelsi Philosophiae Et Medicinae Utriusque Universae, Compendium. Paris: Catalogus operum et librorum; 1566.
90. [90] Faraday, M., The decomposition of chloride of silver by hydrogen, and by Zinc. Q J Sci Lit Arts 8 (1820), 374–376.
91. [91] Spring, W., Recherches sur la propriété que possèdent les corps de se souder sous l'action de la pression. Bull l'Académie R Des Sci Des Lettres Des B-Art Belgique Sci 2e Série XLIX (1880), 323–379.
92. [92] Spring, W., Formation de queques sulfure par l'action de la pression. Considération qui en découlent touchant les propriétés des états allotropiques do phosphore et du carbone. Bull Soc Chim Paris 39 (1883), 641–647.
93. [93] Spring, W., Réaction du sulfate de baryum et du carbonate de sodium sous l'influence de la pression. Bull Soc Chim Paris 44 (1885), 166–169.
94. [94] Lea, M.C., Disruption of the silver haloid molecule by mechanical force. Am J Sci s3-43 (1892), 527–531, 10.2475/ajs.s3-43.258.52.
95. [95] Lea, M.C., On endothermic decompositions obstained by pressure; Part II, Transformations of energy by shearing stress. Am J Sci s3-46 (1893), 413–420, 10.2475/ajs.s3-46.276.41.
96. [96] Ostwald W. Part 1: Chemische Energie. Lehrb. der Allg. Chemie, vol. 2, Verlag von Wilhelm Engelman; 1903.
97. [97] Reis A. Handbuch der allgemeinen Chemie. Herausgegeben von Wilhelm Ostwald und Carl Drucker Bd. I: Die chemische Literatur und die Organisation der Wissenschaft. Von Wilhelm Ostwald. Akademische Verlagsgesellschaft m. b. H., Leipzig. 1919. 120 Seiten. Zeitschrift Für Elektrochemie Und Angew Phys Chemie 1919;25:371–2. http://dx.doi.org/10.1002/bbpc.19190252109.
98. [98] Takacs, L., The historical development of mechanochemistry. Chem Soc Rev, 42, 2013, 7649, 10.1039/c2cs35442j.
99. [99] Konstantinovich, B.N., Watson, W.F., Mechanochemistry of polymers. 1964, Maclaren.
100. [100] Bowden, F.P., Yoffe, A.D., Initiation and growth of explosion in liquids and solids. 1952, CUP Archive.
101. [101] Boldyrev, V.V., Mechanochemistry and mechanical activation of solids. Russ Chem Rev 75 (2006), 177–189, 10.1070/RC2006v075n03ABEH001205.
102. [102] Benjamin, J.S., Mechanical alloying. Sci Am 234 (1976), 40–48.
103. [103] Benjamin, J.S., Mechanical alloying—a perspective. Met Powder Rep 45 (1990), 122–127, 10.1016/S0026-0657(10)80124-9.
104. [104] Arzt E, Schultz L. New materials by mechanical alloying techniques 1991.
105. [105] Koch, C.C., Preparation of “amorphous” Ni60Nb40 by mechanical alloying. Appl Phys Lett, 43, 1983, 1017, 10.1063/1.94213.
106. [106] Gutman, E.M., Mechanochemistry of materials. 1998, Cambridge International Science Publishing.
107. [107] Takacs, L., Self-sustaining reactions induced by ball milling: an overview. Int J Self-Propagating High-Temperature Synth 18 (2009), 276–282, 10.3103/S1061386209040086.
108. [108] Hick, S.M., Griebel, C., Restrepo, D.T., Truitt, J.H., Buker, E.J., Bylda, C., et al. Mechanocatalysis for biomass-derived chemicals and fuels. Green Chem, 12, 2010, 468, 10.1039/b923079c.
109. [109] Rodríguez, B., Bruckmann, A., Rantanen, T., Bolm, C., Solvent-free carbon-carbon bond formations in ball mills. Adv Synth Catal 349 (2007), 2213–2233, 10.1002/adsc.200700252.
110. [110] Collister, J., Commercialization of polymer nanocomposites. Polym. Nanocomposites. vol. 804, 2001, American Chemical Society, 10.1021/bk-2002-0804.ch002 p. 2–7.
111. [111] Staudinger, H., Leupold, E.O., Über Isopren und Kautschuk, 18. Mitteil.: Viscositäts-Untersuchungen an Balata. Berichte Der Dtsch Chem Gesellschaft (A B Ser) 63 (1930), 730–733, 10.1002/cber.1930063032.
112. [112] Staudinger, H., Bondy, H.F., Über Isopren und Kautschuk, 19. Mitteil.: Über die Molekülgröße des Kautschuks und der Balata. Berichte Der Dtsch Chem Gesellschaft (A B Ser) 63 (1930), 734–736, 10.1002/cber.1930063033.
113. [113] Vasiliu-Oprea, C., Dan, F., Macromolecular mechanochemistry. Polym Mechanochem. vol. 1, 2006, Cambridge International Science Publishing Ltd, Cambridge.
114. [114] Casale, A., Polymer stress reactions. 2012, Elsevier Science.
115. [115] Stevens, M.P., Polymer chemistry: an introduction. 1998, Oxford University Press, USA.
116. [116] Shaw, M.T., MacKnight, W.J., Introduction to polymer viscoelasticity. 2005, John Wiley & Sons, Inc., Hoboken, NJ, USA, 10.1002/0471741833.
117. [117] Ward, I.M., Sweeney, J., Mechanical properties of solid polymers. 2012, John Wiley & Sons.
118. [118] Launey, M.E., Ritchie, R.O., On the fracture toughness of advanced materials. Adv Mater 21 (2009), 2103–2110, 10.1002/adma.200803322.
119. [119] Porter, R.S., Johnson, J.F., The entanglement concept in polymer systems. Chem Rev 66 (1966), 1–27, 10.1021/cr60239a001.
120. [120] Kausch, H., Plummer, C.J., The role of individual chains in polymer deformation. Polymer (Guildf) 35 (1994), 3848–3857, 10.1016/0032-3861(94)90267-4.
121. [121] Kauzmann, W., Eyring, H., The viscous flow of large molecules. J Am Chem Soc 62 (1940), 3113–3125, 10.1021/ja01868a059.
122. [122] Ayrey, G., Moore, C.G., Watson, W.F., Mastication. Part III. Chemical verification of the mechanical degradation mechanism of cold mastication. J Polym Sci 19 (1956), 1–15, 10.1002/pol.1956.12019910.
123. [123] Basedow, A.M., Ebert, K.H., Ultrasonic degradation of polymers in solution. Adv Polym Sci 22 (1977), 83–148, 10.1007/3-540-07942-4_6.
124. [124] Porter, R.S., Johnson, J.F., A study of several systems of the type laminar flow degradation of polyisobutene. J Phys Chem 63 (1959), 202–205, 10.1021/j150572a017.
125. [125] Keller, A., Odell, J.A., The extensibility of macromolecules in solution; a new focus for macromolecular science. Colloid Polym Sci 263 (1985), 181–201, 10.1007/BF01415506.
126. [126] Odell, J.A., Keller, A., Flow-induced chain fracture of isolated linear macromolecules in solution. J Polym Sci Part B Polym Phys 24 (1986), 1889–1916, 10.1002/polb.1986.090240901.
127. [127] Encina, M.V., Lissi, E., Sarasúa, M., Gargallo, L., Radic, D., Ultrasonic degradation of polyvinylpyrrolidone: effect of peroxide linkages. J Polym Sci Polym Lett Ed 18 (1980), 757–760, 10.1002/pol.1980.130181201.
128. [128] Berkowski, K.L., Potisek, S.L., Hickenboth, C.R., Moore, J.S., Ultrasound-induced site-specific cleavage of azo-functionalized poly(ethylene glycol). Macromolecules 38 (2005), 8975–8978, 10.1021/ma051394n.
129. [129] Ramirez, A.L.B., Kean, Z.S., Orlicki, J.A., Champhekar, M., Elsakr, S.M., Krause, W.E., et al. Mechanochemical strengthening of a synthetic polymer in response to typically destructive shear forces. Nat Chem 5 (2013), 757–761, 10.1038/nchem.1720.
130. [130] Yang, J., Li, H., Wang, G., He, B., Excimer formation in uniaxially stretched polymer films. J Appl Polym Sci 82 (2001), 2347–2351, 10.1002/app.2083.
131. [131] Paulusse, J.M.J., Sijbesma, R.P., Reversible mechanochemistry of a PdII coordination polymer. Angew Chemie Int Ed 43 (2004), 4460–4462, 10.1002/anie.200460040.
132. [132] Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., Leibler, L., Self-healing and thermoreversible rubber from supramolecular assembly. Nature 451 (2008), 977–980, 10.1038/nature06669.
133. [133] Dubinskaya, A.M., Transformations of organic compounds under the action of mechanical stress. Russ Chem Rev 68 (1999), 637–652, 10.1070/RC1999v068n08ABEH000435.
134. [134] Smith, A.P., Shay, J.S., Spontak, R.J., Balik, C.M., Ade, H., Smith, S.D., et al. High-energy mechanical milling of poly(methyl methacrylate), polyisoprene and poly(ethylene-alt-propylene). Polymer (Guildf) 41 (2000), 6271–6283, 10.1016/S0032-3861(99)00830-7.
135. [135] Font, J., Muntasell, J., Cesari, E., Cold-crystallization of poly(ether-ether-ketone) amorphized by ball milling. Mater Res Bull 36 (2001), 1665–1673, 10.1016/S0025-5408(01)00648-1.
136. [136] Font, J., Muntasell, J., Cesari, E., Poly(butylene terephthalate) poly(ethylene terephthalate) mixtures formed by ball milling. Mater Res Bull 34 (1999), 157–165, 10.1016/S0025-5408(98)00199-8.
137. [137] Shaw, W.J.D., Current understanding of mechanically alloyed polymers. Mater Sci Forum 269–272 (1998), 19–30, 10.4028/www.scientific.net/MSF.269-272.19.
138. [138] Cysne Barbosa, A.P., Stranz, M., Katzenberg, F., Köster, U., Cryogenic mechanical milling of high density polyethylene. E-Polymers 9 (2009), 1–7, 10.1515/epoly.2009.9.1.1149.
139. [139] Stranz, M., Köster, U., Katzenberg, F., Stress induced formation of stable & metastable phases in semi-crystalline polymers during cryogenic mechanical milling. J Metastable Nanocrystalline Mater 24–25 (2005), 463–466, 10.4028/www.scientific.net/JMNM.24-25.463.
140. [140] Esterly, D.M., Love, B.J., Phase transformation to? β-poly(vinylidene fluoride) by milling. J Polym Sci Part B Polym Phys 42 (2004), 91–97, 10.1002/polb.10613.
141. [141] Chen, Y., Li, Y., Zou, H., Liang, M., Effect of solid-state shear milling on structure and properties of HDPE/UHMWPE blends. J Appl Polym Sci, 131, 2014, 10.1002/app.39916.
142. [142] Gabriel, M.C., Mendes, L.B., Carvalho, B.D.M., Pinheiro, L.A., Capocchi, J.D.T., Kubaski, E.T., et al. High-energy mechanical milling of ultra-high molecular weight polyethylene (UHMWPE). Mater Sci Forum 660–661 (2010), 325–328, 10.4028/www.scientific.net/MSF.660-661.325.
143. [143] Lu, C., Wang, Q., Preparation of ultrafine polypropylene/iron composite powders through pan-milling. J Mater Process Technol 145 (2004), 336–344, 10.1016/j.jmatprotec.2003.08.002.
144. [144] Stranz, M., Köster, U., Katzenberg, F., Formation of polymer blends and nano-composites by cryogenic mechanical milling. J Metastable Nanocrystalline Mater 24–25 (2005), 609–614, 10.4028/www.scientific.net/JMNM.24-25.609.
145. [145] Smith, A.P., Ade, H., Koch, C.C., Spontak, R.J., Cryogenic mechanical alloying as an alternative strategy for the recycling of tires. Polymer (Guildf) 42 (2001), 4453–4457, 10.1016/S0032-3861(00)00804-1.
146. [146] Giri, A.K., Magnetic properties of iron-polyethylene nanocomposites prepared by high energy ball milling. J Appl Phys, 81, 1997, 1348, 10.1063/1.363870.
147. [147] Nathani, H., Misra, R.D.K., Surface effects on the magnetic behavior of nanocrystalline nickel ferrites and nickel ferrite-polymer nanocomposites. Mater Sci Eng B 113 (2004), 228–235, 10.1016/j.mseb.2004.08.010.
148. [148] Fang, L., Leng, Y., Gao, P., Processing and mechanical properties of HA/UHMWPE nanocomposites. Biomaterials 27 (2006), 3701–3707, 10.1016/j.biomaterials.2006.02.023.
149. [149] Fang, L., Leng, Y., Gao, P., Processing of hydroxyapatite reinforced ultrahigh molecular weight polyethylene for biomedical applications. Biomaterials 26 (2005), 3471–3478, 10.1016/j.biomaterials.2004.09.022.
150. 2 nanoparticles. Polymer (Guildf) 50 (2009), 1732–1742, 10.1016/j.polymer.2009.02.011.
151. [151] Jung, J., Kim, J., Uhm, Y.R., Jeon, J.-K., Lee, S., Lee, H.M., et al. Preparations and thermal properties of micro- and nano-BN dispersed HDPE composites. Thermochim Acta 499 (2010), 8–14, 10.1016/j.tca.2009.10.013.
152. [152] Abareshi, M., Zebarjad, S.M., Goharshadi, E.K., Study of the morphology and granulometry of polyethylene-clay nanocomposite powders. J Vinyl Addit Technol 16 (2010), 90–97, 10.1002/vnl.20217.
153. [153] Uhm, Y.R., Kim, J., Lee, S., Jeon, J., Rhee, C.K., In situ fabrication of surface modified lead monoxide nanopowder and Its HDPE nanocomposite. Ind Eng Chem Res 50 (2011), 4478–4483, 10.1021/ie102300x.
154. [154] Olmos, D., Rodríguez-Gutiérrez, E., González-Benito, J., Polymer structure and morphology of low density polyethylene filled with silica nanoparticles. Polym Compos 33 (2012), 2009–2021, 10.1002/pc.22343.
155. [155] Gorrasi, G., Sarno, M., Di Bartolomeo, A., Sannino, D., Ciambelli, P., Vittoria, V., Incorporation of carbon nanotubes into polyethylene by high energy ball milling: morphology and physical properties. J Polym Sci Part B Polym Phys 45 (2007), 597–606, 10.1002/polb.21070.
156. [156] Ferrara, M., Neitzert, H.-C., Sarno, M., Gorrasi, G., Sannino, D., Vittoria, V., et al. Influence of the electrical field applied during thermal cycling on the conductivity of LLDPE/CNT composites. Phys E Low-Dimensional Syst Nanostruct 37 (2007), 66–71, 10.1016/j.physe.2006.10.008.
157. [157] Noroozi, M., Zebarjad, S.M., Effects of multiwall carbon nanotubes on the thermal and mechanical properties of medium density polyethylene matrix nanocomposites produced by a mechanical milling method. J Vinyl Addit Technol, 2010, 10.1002/vnl.2022.
158. [158] Terife, G., Narh, K.A., Properties of carbon nanotube reinforced linear low density polyethylene nanocomposites fabricated by cryogenic ball-milling. Polym Compos 32 (2011), 2101–2109, 10.1002/pc.21243.
159. [159] Xiao, K., Zhang, L., Zarudi, I., Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites. Compos Sci Technol 67 (2007), 177–182, 10.1016/j.compscitech.2006.07.027.
160. [160] Kanagaraj, S., Varanda, F.R., Zhil'tsova, T.V., Oliveira, M.S.A., Simões, J.A.O., Mechanical properties of high density polyethylene/carbon nanotube composites. Compos Sci Technol 67 (2007), 3071–3077, 10.1016/j.compscitech.2007.04.024.
161. [161] Wang, Y., Cheng, R., Liang, L., Study on the preparation and characterization of ultra-high molecular weight polyethylene? carbon nanotubes composite fiber. Compos Sci Technol 65 (2005), 793–797, 10.1016/j.compscitech.2004.10.012.
162. [162] Gorrasi, G., Di Lieto, R., Patimo, G., De Pasquale, S., Sorrentino, A., Structure–property relationships on uniaxially oriented carbon nanotube/polyethylene composites. Polymer (Guildf) 52 (2011), 1124–1132, 10.1016/j.polymer.2011.01.008.
163. [163] Kashiwagi, T., Du, F., Douglas, J.F., Winey, K.I., Harris, R.H., Shields, J.R., Nanoparticle networks reduce the flammability of polymer nanocomposites. Nat Mater 4 (2005), 928–933, 10.1038/nmat1502.
164. [164] Cipiriano, B.H., Kashiwagi, T., Raghavan, S.R., Yang, Y., Grulke, E.A., Yamamoto, K., et al. Effects of aspect ratio of MWNT on the flammability properties of polymer nanocomposites. Polymer (Guildf) 48 (2007), 6086–6096, 10.1016/j.polymer.2007.07.070.
165. [165] Pucciariello, R., Villani, V., Giammarino, G., Thermal behaviour of nanocomposites based on linear-low-density poly(ethylene) and carbon nanotubes prepared by high energy ball milling. J Polym Res 18 (2010), 949–956, 10.1007/s10965-010-9494-1.
166. [166] Martínez-Morlanes, M.J., Castell, P., Martínez-Nogués, V., Martinez, M.T., Alonso, P.J., Puértolas, J.a., Effects of gamma-irradiation on UHMWPE/MWNT nanocomposites. Compos Sci Technol 71 (2011), 282–288, 10.1016/j.compscitech.2010.11.01.
167. [167] Jiang, X., Drzal, L.T., Reduction in percolation threshold of injection molded high-density polyethylene/exfoliated graphene nanoplatelets composites by solid state ball milling and solid state shear pulverization. J Appl Polym Sci 124 (2012), 525–535, 10.1002/app.34891.
168. [168] Jiang, X., Drzal, L.T., Multifunctional high density polyethylene nanocomposites produced by incorporation of exfoliated graphite nanoplatelets 1: Morphology and mechanical properties. Polym Compos, 2009, 1091–1098, 10.1002/pc.20896.
169. [169] Jiang, X., Drzal, L.T., Multifunctional high-density polyethylene nanocomposites produced by incorporation of exfoliated graphene nanoplatelets 2: Crystallization, thermal and electrical properties. Polym Compos 33 (2012), 636–642, 10.1002/pc.22187.
170. [170] Ruan, W.H., Zhang, M.Q., Rong, M.Z., Friedrich, K., Polypropylene composites filled with in-situ grafting polymerization modified nano-silica particles. J Mater Sci 39 (2004), 3475–3478, 10.1023/B:JMSC.0000026955.23175.db.
171. [171] Shao, W., Wang, Q., Ma, H., Study of polypropylene/montmorillonite nanocomposites prepared by solid-state shear compounding (S3C) using pan-mill equipment: the morphology of montmorillonite and thermal properties of the nanocomposites. Polym Int 54 (2005), 336–341, 10.1002/pi.1683.
172. [172] Xia, H., Wang, Q., Li, K., Hu, G.-H., Preparation of polypropylene/carbon nanotube composite powder with a solid-state mechanochemical pulverization process. J Appl Polym Sci 93 (2004), 378–386, 10.1002/app.20435.
173. [173] Menzer, K., Krause, B., Boldt, R., Kretzschmar, B., Weidisch, R., Pötschke, P., Percolation behaviour of multiwalled carbon nanotubes of altered length and primary agglomerate morphology in melt mixed isotactic polypropylene-based composites. Compos Sci Technol 71 (2011), 1936–1943, 10.1016/j.compscitech.2011.09.009.
174. [174] Alig, I., Skipa, T., Lellinger, D., Pötschke, P., Destruction and formation of a carbon nanotube network in polymer melts: rheology and conductivity spectroscopy. Polymer (Guildf) 49 (2008), 3524–3532, 10.1016/j.polymer.2008.05.037.
175. [175] Tu, H., Ye, L., Thermal conductive PS/graphite composites. Polym Adv Technol 20 (2009), 21–27, 10.1002/pat.1236.
176. [176] Shin, J., Kim, C., Geckeler, K.E., Single-walled carbon nanotube-polystyrene nanocomposites: dispersing nanotubes in organic media. Polym Int 58 (2009), 579–583, 10.1002/pi.2550.
177. [177] Wu, H., Zhao, W., Hu, H., Chen, G., One-step in situ ball milling synthesis of polymer-functionalized graphene nanocomposites. J Mater Chem, 21, 2011, 8626, 10.1039/c1jm10819k.
178. [178] Ma, H., Zeng, J., Realff, M.L., Kumar, S., Schiraldi, D.A., Processing, structure, and properties of fibers from polyester/carbon nanofiber composites. Compos Sci Technol 63 (2003), 1617–1628, 10.1016/S0266-3538(03)00071-X.
179. [179] Wang, G., Chen, Y., Wang, Q., Structure and properties of poly(ethylene terephthalate)/Na + -montmorillonite nanocomposites prepared by solid state shear milling (S 3 M) method. J Polym Sci Part B Polym Phys 46 (2008), 807–817, 10.1002/polb.21417.
180. [180] Martínez-Gallegos, S., Herrero, M., Barriga, C., Labajos, F.M., Rives, V., Dispersion of layered double hydroxides in poly(ethylene terephthalate) by in situ polymerization and mechanical grinding. Appl Clay Sci 45 (2009), 44–49, 10.1016/j.clay.2009.04.007.
181. [181] Santoro, G., Gómez, M.a., Marco, C., Ellis, G., A solvent-free dispersion method for the preparation of PET/MWCNT composites. Macromol Mater Eng 295 (2010), 652–659, 10.1002/mame.20090038.
182. [182] Kim, J.Y., Park, H.S., Kim, S.H., Multiwall-carbon-nanotube-reinforced poly(ethylene terephthalate) nanocomposites by melt compounding. J Appl Polym Sci 103 (2007), 1450–1457, 10.1002/app.25377.
183. [183] Jin, S.H., Park, Y.-B., Yoon, K.H., Rheological and mechanical properties of surface modified multi-walled carbon nanotube-filled PET composite. Compos Sci Technol 67 (2007), 3434–3441, 10.1016/j.compscitech.2007.03.013.
184. [184] Jin, S.H., Yoon, K.H., Park, Y.-B., Bang, D.S., Properties of surface-modified multiwalled carbon nanotube filled poly(ethylene terephthalate) composite films. J Appl Polym Sci 107 (2008), 1163–1168, 10.1002/app.27153.
185. [185] Ahn, B.W., Chi, Y.S., Kang, T.J., Preparation and characterization of multi-walled carbon nanotube/poly(ethylene terephthalate) nanoweb. J Appl Polym Sci 110 (2008), 4055–4063, 10.1002/app.28968.
186. [186] Krause, B., Villmow, T., Boldt, R., Mende, M., Petzold, G., Pötschke, P., Influence of dry grinding in a ball mill on the length of multiwalled carbon nanotubes and their dispersion and percolation behaviour in melt mixed polycarbonate composites. Compos Sci Technol 71 (2011), 1145–1153, 10.1016/j.compscitech.2011.04.004.
187. [187] Romhány, G., Vígh, J., Thomann, R., Karger-Kocsis, J., Sajó, I.E., PCBT/MWCNT nanocomposites prepared by in situ polymerization of CBT after solid-phase high-energy ball milling of CBT with MWCNT. Macromol Mater Eng 296 (2011), 544–550, 10.1002/mame.201000381.
188. [188] Gorrasi, G., Senatore, V., Vigliotta, G., Belviso, S., Pucciariello, R., PET–halloysite nanotubes composites for packaging application: preparation, characterization and analysis of physical properties. Eur Polym J 61 (2014), 145–156, 10.1016/j.eurpolymj.2014.10.004.
189. [189] Petrovicova, E., Knight, R., Schadler, L.S., Twardowski, T.E., Nylon 11/silica nanocomposite coatings applied by the HVOF process. I. Microstructure and morphology. J Appl Polym Sci 77 (2000), 1684–1699 doi: 10.1002/1097-4628(20000822)77:8<1684::AID-APP5>3.0.CO;2-Q.
190. [190] Niezgoda, S., Gupta, V., Knight, R., Cairncross, R.a., Twardowski, T.E., Effect of reinforcement size on the scratch resistance and crystallinity of HVOF sprayed Nylon-11/ceramic composite coatings. J Therm Spray Technol 15 (2006), 731–738, 10.1361/105996306X14687.
191. [191] Petrovicova, E., Knight, R., Schadler, L.S., Twardowski, T.E., Nylon 11/silica nanocomposite coatings applied by the HVOF process. II. Mechanical and barrier properties. J Appl Polym Sci 78 (2000), 2272–2289 doi: 10.1002/1097-4628(20001220)78:13<2272::AID-APP50>3.0.CO;2-U.
192. [192] Schadler, L.S., Laut, K.O., Smith, R.W., Petrovicova, E., Microstructure and mechanical properties of thermally sprayed silica/nylon nanocomposites. J Therm Spray Technol 6 (1997), 475–485, 10.1007/s11666-997-0034-4.
193. [193] Athreya, S.R., Kalaitzidou, K., Das, S., Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering. Mater Sci Eng A 527 (2010), 2637–2642, 10.1016/j.msea.2009.12.028.
194. [194] Athreya, S.R., Kalaitzidou, K., Das, S., Mechanical and microstructural properties of Nylon-12/carbon black composites: selective laser sintering versus melt compounding and injection molding. Compos Sci Technol 71 (2011), 506–510, 10.1016/j.compscitech.2010.12.028.
195. [195] Yan, C., Hao, L., Xu, L., Shi, Y., Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering. Compos Sci Technol 71 (2011), 1834–1841, 10.1016/j.compscitech.2011.08.013.
196. [196] Castrillo, P.D., Olmos, D., Amador, D.R., González-Benito, J., Real dispersion of isolated fumed silica nanoparticles in highly filled PMMA prepared by high energy ball milling. J Colloid Interface Sci 308 (2007), 318–324, 10.1016/j.jcis.2007.01.022.
197. [197] González-Benito, J., González-Gaitano, G., Interfacial conformations and molecular structure of PMMA in PMMA/silica nanocomposites. Effect of high-energy ball milling. Macromolecules 41 (2008), 4777–4785, 10.1021/ma800260k.
198. [198] Yun, K.M., Suryamas, A.B., Hirakawa, C., Iskandar, F., Okuyama, K., A new physical route to produce monodispersed microsphere nanoparticle-polymer composites. Langmuir 25 (2009), 11038–11042, 10.1021/la901343j.
199. [199] Awasthi, K., Kumar, R., Raghubanshi, H., Awasthi, S., Pandey, R., Singh, D., et al. Synthesis of nano-carbon (nanotubes, nanofibres, graphene) materials. Bull Mater Sci 34 (2011), 607–614, 10.1007/s12034-011-0170-9.
200. [200] Ahn, J.-H., Wang, G.X., Liu, H.K., Dou, S.X., Nanoparticle-dispersed PEO polymer electrolytes for Li batteries. J Power Sources 119–121 (2003), 422–426, 10.1016/S0378-7753(03)00264-7.
201. [201] Appetecchi, G.B., Hassoun, J., Scrosati, B., Croce, F., Cassel, F., Salomon, M., Hot-pressed, solvent-free, nanocomposite. PEO-based electrolyte membranes. J Power Sources 124 (2003), 246–253, 10.1016/S0378-7753(03)00611-6.
202. [202] Lai, M.O., Lu, L., Laing, W., Formation of magnesium nanocomposite via mechanical milling. Compos Struct 66 (2004), 301–304, 10.1016/j.compstruct.2004.04.052.
203. 15 nanocomposite polymer electrolytes for lithium secondary batteries. J Power Sources 149 (2005), 90–95, 10.1016/j.jpowsour.2005.02.008.
204. 2 composites compounded using a ball milling technique. Compos Sci Technol 68 (2008), 3073–3080, 10.1016/j.compscitech.2008.06.027.
205. [205] Deng, F., Ogasawara, T., Takeda, N., Evaluating the orientation and dispersion of carbon nanotubes inside nanocomposites by a focused-ion-beam technique. Mater Lett 61 (2007), 5095–5097, 10.1016/j.matlet.2007.04.049.
206. [206] Díez-Pascual, A.M., Naffakh, M., Gómez, M.a., Marco, C., Ellis, G., González-Domínguez, J.M., et al. The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites. Nanotechnology, 20, 2009, 315707, 10.1088/0957-4484/20/31/31570.
207. [207] Díez-Pascual, A.M., Naffakh, M., Gómez, M.a., Marco, C., Ellis, G., Martínez, M.T., et al. Development and characterization of PEEK/carbon nanotube composites. Carbon N Y 47 (2009), 3079–3090, 10.1016/j.carbon.2009.07.020.
208. [208] Naffakh, M., Díez-Pascual, A.M., Marco, C., Gómez, M.a., Jiménez, I., Novel melt-processable poly(ether ether ketone)(PEEK)/inorganic fullerene-like WS(2) nanoparticles for critical applications. J Phys Chem B 114 (2010), 11444–11453, 10.1021/jp105340g.
209. [209] Hedayati, M., Salehi, M., Bagheri, R., Panjepour, M., Maghzian, A., Ball milling preparation and characterization of poly (ether ether ketone)/surface modified silica nanocomposite. Powder Technol 207 (2011), 296–303, 10.1016/j.powtec.2010.11.011.
210. [210] Díez-Pascual, A.M., Xu, C., Luque, R., Development and characterization of novel poly(ether ether ketone)/ZnO bionanocomposites. J Mater Chem B, 2, 2014, 3065, 10.1039/c3tb21800g.
211. [211] Wu, H., Rook, B., Drzal, L.T., Dispersion optimization of exfoliated graphene nanoplatelet in polyetherimide nanocomposites: extrusion, precoating, and solid state ball milling. Polym Compos 34 (2013), 426–432, 10.1002/pc.22425.
212. [212] Isayev, a.I., Kumar, R., Lewis, T.M., Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes. Polymer (Guildf) 50 (2009), 250–260, 10.1016/j.polymer.2008.10.052.
213. [213] Wu, G., Tang, Y., Weng, R., Dispersion of nano-carbon filled polyimide composites using self-degradated low molecular poly(amic acid) as impurity-free dispersant. Polym Degrad Stab 95 (2010), 1449–1455, 10.1016/j.polymdegradstab.2010.06.026.
214. [214] Koo, C.M., Ham, H.T., Choi, M.H., Kim, S.O., Chung, I.J., Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling. Polymer (Guildf) 44 (2003), 681–689, 10.1016/S0032-3861(02)00803-0.
215. [215] Wilson, R., George, S.M., Maria, H.J., Plivelic, T.S., Kumar, S.A., Thomas, S., Clay intercalation and its influence on the morphology and transport properties of EVA/clay nanocomposites. J Phys Chem C 116 (2012), 20002–20014, 10.1021/jp302177y.
216. [216] Tang, Y., Hu, Y., Wang, J., Zong, R., Gui, Z., Chen, Z., et al. Influence of organophilic clay and preparation methods on EVA/montmorillonite nanocomposites. J Appl Polym Sci 91 (2004), 2416–2421, 10.1002/app.13401.
217. [217] Li, C., Zhang, W., Zhao, B., Liang, M., Lu, C., Preparation, characterization and thermal behavior of poly(vinyl alcohol)/organic montmorillonite nanocomposites through solid-state shear pan-milling. J Therm Anal Calorim 103 (2010), 205–212, 10.1007/s10973-010-0975-6.
218. [218] Wu, H., Zhao, W., Chen, G., One-pot in situ ball milling preparation of polymer/graphene nanocomposites. J Appl Polym Sci 125 (2012), 3899–3903, 10.1002/app.35413.
219. [219] Hwang, W.-G., Wei, K.-H., Wu, C.-M., Preparation and mechanical properties of nitrile butadiene rubber/silicate nanocomposites. Polymer (Guildf) 45 (2004), 5729–5734, 10.1016/j.polymer.2004.05.040.
220. [220] Gatos, K.G., Thomann, R., Karger-Kocsis, J., Characteristics of ethylene propylene diene monomer rubber/organoclay nanocomposites resulting from different processing conditions and formulations. Polym Int 53 (2004), 1191–1197, 10.1002/pi.1556.
221. [221] Chou, K.-S., Huang, K.-C., Shih, Z.-H., Effect of mixing process on electromagnetic interference shielding effectiveness of nickel/acrylonitrile-butadiene-styrene composites. J Appl Polym Sci 97 (2005), 128–135, 10.1002/app.21740.
222. [222] Tang, Y.H., Witt, N., Ye, L., Conductive rubber nanocomposites as tensile and pressure sensors. Appl Mech Mater 217–219 (2012), 130–133, 10.4028/www.scientific.net/AMM.217-219.130.
223. [223] Witt, N., Tang, Y., Ye, L., Fang, L., Silicone rubber nanocomposites containing a small amount of hybrid fillers with enhanced electrical sensitivity. Mater Des 45 (2013), 548–554, 10.1016/j.matdes.2012.09.029.
224. [224] Alimardani, M., Abbassi-Sourki, F., Bakhshandeh, G.R., An investigation on the dispersibility of carbon nanotube in the latex nanocomposites using rheological properties. Compos Part B Eng 56 (2014), 149–156, 10.1016/j.compositesb.2013.08.031.
225. [225] Potts, J.R., Shankar, O., Du, L., Ruoff, R.S., Processing–morphology–property relationships and composite theory analysis of reduced graphene oxide/natural rubber nanocomposites. Macromolecules 45 (2012), 6045–6055, 10.1021/ma300706k.
226. [226] Raza, M.a., Westwood, A, Brown, a.P., Stirling, C., Texture, transport and mechanical properties of graphite nanoplatelet/silicone composites produced by three roll mill. Compos Sci Technol 72 (2012), 467–475, 10.1016/j.compscitech.2011.12.010.
227. [227] Raza MA, Westwood AVK, Stirling C. Graphite nanoplatelet/silicone composites for thermal interface applications. 2010 Int. Symp. Adv. Packag. Mater. Microtech, IEEE; 2010, p. 34–48. http://dx.doi.org/10.1109/ISAPM.2010.5441382.
228. [228] Raza, M.A., Westwood, A., Brown, A., Hondow, N., Stirling, C., Characterisation of graphite nanoplatelets and the physical properties of graphite nanoplatelet/silicone composites for thermal interface applications. Carbon N Y 49 (2011), 4269–4279, 10.1016/j.carbon.2011.06.002.
229. 4–polyaniline during high-energy ball milling. Phys B Condens Matter 367 (2005), 182–187, 10.1016/j.physb.2005.06.014.
230. [230] Zhu, Y.G., Li, Z.Q., Gu, J.J., Zhang, D., Tanimoto, T., Polyaniline/iron nanocomposites prepared by cryomilling. J Polym Sci Part B Polym Phys 44 (2006), 3157–3164, 10.1002/polb.20955.
231. [231] Zhu, Y., Li, Z., Zhang, D., Electromagnetic nanocomposites prepared by cryomilling of polyaniline and Fe nanoparticles. J Polym Sci Part B Polym Phys 46 (2008), 1571–1576, 10.1002/polb.21493.
232. [232] Gupta, T.K., Singh, B.P., Mathur, R.B., Dhakate, S.R., Multi-walled carbon nanotube-graphene-polyaniline multiphase nanocomposite with superior electromagnetic shielding effectiveness. Nanoscale 6 (2014), 842–851, 10.1039/c3nr04565j.
233. [233] Seyhan, a.T., Gojny, F.H., Tanoğlu, M., Schulte, K., Critical aspects related to processing of carbon nanotube/unsaturated thermoset polyester nanocomposites. Eur Polym J 43 (2007), 374–379, 10.1016/j.eurpolymj.2006.11.018.
234. [234] Seyhan, a.T., Gojny, F.H., Tanoğlu, M., Schulte, K., Rheological and dynamic-mechanical behavior of carbon nanotube/vinyl ester–polyester suspensions and their nanocomposites. Eur Polym J 43 (2007), 2836–2847, 10.1016/j.eurpolymj.2007.04.022.
235. [235] Seyhan, A.T., de la Vega, A., Tanoglu, M., Schulte, K., Thermal curing behavior of MWCNT modified vinyl ester-polyester resin suspensions prepared with 3-roll milling technique. J Polym Sci Part B Polym Phys 47 (2009), 1511–1522, 10.1002/polb.21755.
236. [236] Huang, H.-C., Huang, S., Hsieh, T., Chen, C., Characterizations of UV-curable montmorillonite/epoxy nanocomposites prepared by a hybrid of chemical dispersion and planetary mechanical milling process. J Appl Polym Sci 123 (2012), 3199–3207, 10.1002/app.34988.
237. [237] Deng, S., Zhang, J., Ye, L., Halloysite–epoxy nanocomposites with improved particle dispersion through ball mill homogenisation and chemical treatments. Compos Sci Technol 69 (2009), 2497–2505, 10.1016/j.compscitech.2009.07.001.
238. [238] Rosca, I.D., Hoa, S.V., Highly conductive multiwall carbon nanotube and epoxy composites produced by three-roll milling. Carbon N Y 47 (2009), 1958–1968, 10.1016/j.carbon.2009.03.039.
239. [239] Gao, L., Chou, T.-W., Thostenson, E.T., Zhang, Z., A comparative study of damage sensing in fiber composites using uniformly and non-uniformly dispersed carbon nanotubes. Carbon N Y 48 (2010), 3788–3794, 10.1016/j.carbon.2010.06.041.
240. [240] Chakraborty, A.K., Plyhm, T., Barbezat, M., Necola, A., Terrasi, G.P., Carbon nanotube (CNT)–epoxy nanocomposites: a systematic investigation of CNT dispersion. J Nanoparticle Res 13 (2011), 6493–6506, 10.1007/s11051-011-0552-3.
241. [241] Hollertz, R., Chatterjee, S., Gutmann, H., Geiger, T., Nüesch, F.a., Chu, B.T.T., Improvement of toughness and electrical properties of epoxy composites with carbon nanotubes prepared by industrially relevant processes. Nanotechnology, 22, 2011, 125702, 10.1088/0957-4484/22/12/125702.
242. [242] Lu, H., Liang, G.-Z., Ma, X., Zhang, B., Chen, X., Epoxy/clay nanocomposites: further exfoliation of newly modified clay induced by shearing force of ball milling. Polym Int 53 (2004), 1545–1553, 10.1002/pi.1596.
243. [243] Tang, L.-C., Wan, Y.-J., Peng, K., Pei, Y.-B., Wu, L.-B., Chen, L.-M., et al. Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles. Compos Part A Appl Sci Manuf 45 (2013), 95–101, 10.1016/j.compositesa.2012.09.012.
244. [244] Tang, L.-C., Wan, Y.-J., Yan, D., Pei, Y.-B., Zhao, L., Li, Y.-B., et al. The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites. Carbon N Y 60 (2013), 16–27, 10.1016/j.carbon.2013.03.050.
245. [245] Wan, Y.-J., Gong, L.-X., Tang, L.-C., Wu, L.-B., Jiang, J.-X., Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide. Compos Part A Appl Sci Manuf 64 (2014), 79–89, 10.1016/j.compositesa.2014.04.023.
246. [246] Tang, Y., Ye, L., Deng, S., Yang, C., Yuan, W., Influences of processing methods and chemical treatments on fracture toughness of halloysite–epoxy composites. Mater Des 42 (2012), 471–477, 10.1016/j.matdes.2012.06.036.
247. [247] Martin, C., Bouvard, D., Shima, S., Study of particle rearrangement during powder compaction by the Discrete Element Method. J Mech Phys Solids 51 (2003), 667–693, 10.1016/S0022-5096(02)00101-1.
248. [248] Delogu, F., A combined experimental and numerical approach to the kinetics of mechanically induced phase transformations. Acta Mater 56 (2008), 905–912, 10.1016/j.actamat.2007.10.041.
249. [249] Lü, L., Lai, M.O., Mechanical alloying. 1998, Springer, US, Boston, MA, 10.1007/978-1-4615-5509-4.
250. [250] Venkataraman, K.S., Narayanan, K.S., Energetics of collision between grinding media in ball mills and mechanochemical effects. Powder Technol 96 (1998), 190–201, 10.1016/S0032-5910(97)03368-8.
251. [251] Soni, P.R., Mechanical alloying: fundamentals and applications. 1998, Cambridge International Science Publishing.
252. [252] Chattopadhyay, P., Manna, I., Talapatra, S., Pabi, S., A mathematical analysis of milling mechanics in a planetary ball mill. Mater Chem Phys 68 (2001), 85–94, 10.1016/S0254-0584(00)00289-3.
253. [253] Butyagin, P.Y., Active states in mechanochemical reactions. 1989, Harwood Academic Publishers.
254. [254] Burgio, N., Iasonna, A., Magini, M., Martelli, S., Padella, F., Burgio, N., et al. Mechanical alloying of the Fe–Zr system. Correlation between input energy and end products. Nuovo Cim D 13 (1991), 459–476, 10.1007/BF02452130.
255. [255] Gaffet, E., Yousfi, L., Crystal to non-equilibrium phase transition induced by ball-milling. Mater Sci Forum 88–90 (1992), 51–58, 10.4028/www.scientific.net/MSF.88-90.51.
256. [256] Abdellaoui, M., Gaffet, E., The physics of mechanical alloying in a planetary ball mill: mathematical treatment. Acta Metall Mater 43 (1995), 1087–1098, 10.1016/0956-7151(95)92625-7.
257. [257] Le Brun, P., Froyen, L., Delaey, L., The modelling of the mechanical alloying process in a planetary ball mill: comparison between theory and in-situ observations. Mater Sci Eng A 161 (1993), 75–82, 10.1016/0921-5093(93)90477-V.
258. [258] Magini, M., Iasonna, A., Padella, F., Ball milling: an experimental support to the energy transfer evaluated by the collision model. Scr Mater 34 (1996), 13–19, 10.1016/1359-6462(95)00465-3.
259. [259] Chen, Y., Bibole, M., Le Hazif, R., Martin, G., Ball-milling-induced amorphization in NixZry compounds: a parametric study. Phys Rev B 48 (1993), 14–21, 10.1103/PhysRevB.48.14.
260. [260] Pochet, P., Tominez, E., Chaffron, L., Martin, G., Order-disorder transformation in Fe-Al under ball milling. Phys Rev B 52 (1995), 4006–4016, 10.1103/PhysRevB.52.4006.
261. [261] Mio, H., Kano, J., Saito, F., Kaneko, K., Effects of rotational direction and rotation-to-revolution speed ratio in planetary ball milling. Mater Sci Eng A 332 (2002), 75–80, 10.1016/S0921-5093(01)01718-X.
262. [262] Mio, H., Kano, J., Saito, F., Kaneko, K., Optimum revolution and rotational directions and their speeds in planetary ball milling. Int J Miner Process 74 (2004), S85–S92, 10.1016/j.minpro.2004.07.002.
263. [263] Feng, Y.T., Han, K., Owen, D.R.J., Discrete element simulation of the dynamics of high energy planetary ball milling processes. Mater Sci Eng A 375–377 (2004), 815–819, 10.1016/j.msea.2003.10.162.
264. [264] Kakuk, G., Zsoldos, I., Csanády, Á., Oldal, I., Contributions to the modelling of the milling process in a planetary ball mill. Rev Adv Mater Sci 22 (2009), 21–38.
265. [265] Jiang, X., Trunov, M.A., Schoenitz, M., Dave, R.N., Dreizin, E.L., Mechanical alloying and reactive milling in a high energy planetary mill. J Alloys Compd 478 (2009), 246–251, 10.1016/j.jallcom.2008.12.021.
266. [266] Huang, H., Pan, J., McCormick, P.G., On the dynamics of mechanical milling in a vibratory mill. Mater Sci Eng A 232 (1997), 55–62, 10.1016/S0921-5093(97)00084-1.
267. [267] Cocco, G., Delogu, F., Monagheddu, M., Mulas, G., Schiffini, L., Impact characteristics and mechanical alloying processes by ball milling: experimental evaluation and modelling outcomes. Int J Non-Equilibrium Process 11 (2000), 235–269.
268. [268] Streletskii, A., Courtney, T., Kinetic, chemical and mechanical factors affecting mechanical alloying of Ni–bcc transition metal mixtures. Mater Sci Eng A 282 (2000), 213–222, 10.1016/S0921-5093(99)00766-2.
269. [269] Cocco, G., Delogu, F., Schiffini, L., Toward a quantitative understanding of the mechanical alloying process. J Mater Synth Process 8 (2000), 167–180, 10.1023/A:1011308025376.
270. [270] Delogu, F., Schiffini, L., Cocco, G., The invariant laws of the amorphization processes by mechanical alloying. Philos Mag A 81 (2001), 1917–1937, 10.1080/01418610010019107.
271. [271] Abdellaoui, M., Gaffet, E., A mathematical and experimental dynamical phase diagram for ball-milled Ni10Zr7. J Alloys Compd 209 (1994), 351–361, 10.1016/0925-8388(94)91124-X.
272. [272] Calka, A., Radlinski, A., Universal high performance ball-milling device and its application for mechanical alloying. Mater Sci Eng A 134 (1991), 1350–1353, 10.1016/0921-5093(91)90989-Z.
273. [273] Ajaal, T., Smith, R.W., Yen, W.T., The development and characterization of a ball mill for mechanical alloying. Can Metall Q 41 (2002), 7–14, 10.1179/cmq.2002.41.1.7.
274. [274] Ajaal, T.T., The development and characterization of a ball mill for mechanical alloying. 1999, Queen's University Kingston, Ontario, Canada.
275. [275] Davis, R.M., McDermott, B., Koch, C.C., Mechanical alloying of brittle materials. Metall Trans A 19 (1988), 2867–2874, 10.1007/BF02647712.
276. [276] Maurice, D., Courtney, T.H., Modeling of mechanical alloying: Part I. deformation, coalescence, bdand fragmentation mechanisms. Metall Mater Trans A 25 (1994), 147–158, 10.1007/BF02646683.
277. [277] Maurice, D., Courtney, T.H., Milling dynamics: Part II. dynamics of a SPEX mill and a one-dimensional mill. Metall Mater Trans A 27 (1996), 1973–1979, 10.1007/BF02651946.
278. [278] Manai, G., Delogu, F., Rustici, M., Onset of chaotic dynamics in a ball mill: attractors merging and crisis induced intermittency. Chaos An Interdiscip J Nonlinear Sci, 12, 2002, 601, 10.1063/1.1484016.
279. [279] Caravati, C., Delogu, F., Cocco, G., Rustici, M., Hyperchaotic qualities of the ball motion in a ball milling device. Chaos 9 (1999), 219–226, 10.1063/1.166393.
280. [280] Avvakumov, E.G., Mechanical methods of activation of chemical processes. 1986, Nauka Publishing House, Novosibirsk, Russia.
281. [281] Butyagin, P., Advances in mechanochemistry: physical and chemical processes under deformation. 1998, Harwood Acad. Publ, Amsterdam.
282. [282] Urakaev, F.K., Boldyrev, V.V., Mechanism and kinetics of mechanochemical processes in comminuting devices. Powder Technol 107 (2000), 93–107, 10.1016/S0032-5910(99)00175-8.
283. [283] Vasconcelos, I.F., de Figueiredo, R.S., Transformation kinetics on mechanical alloying. J Phys Chem B 107 (2003), 3761–3767, 10.1021/jp027698i.
284. [284] Houston, P.L., Chemical kinetics and reaction dynamics. 2012, Dover Publications.
285. [285] Avvakumov, G.V., Senna, Mamoru, Kosova, N.V., Soft mechanochemical synthesis. 2002, Kluwer Academic Publishers, Boston, 10.1007/b114163.
286. [286] Klika, V., Maršík, F., Coupling effect between mechanical loading and chemical reactions. J Phys Chem B 113 (2009), 14689–14697, 10.1021/jp903054y.
287. [287] Levitas, V.I., High-pressure mechanochemistry: conceptual multiscale theory and interpretation of experiments. Phys Rev B, 70, 2004, 184118, 10.1103/PhysRevB.70.184118.
288. [288] Sturman, R., Ottino, J.M., Wiggins, S., The mathematical foundations of mixing: the linked twist map as a paradigm in applications: micro to macro. 2006, Cambridge University Press, Fluids to Solids.
289. [289] Levitas, V.I., Ma, Y., Hashemi, J., Holtz, M., Guven, N., Strain-induced disorder, phase transformations, and transformation-induced plasticity in hexagonal boron nitride under compression and shear in a rotational diamond anvil cell: in situ x-ray diffraction study and modeling. J Chem Phys, 125, 2006, 44507, 10.1063/1.2208353.
290. [290] Levitas, V.I., Zarechnyy, O.M., Plastic flow under compression and shear in rotational diamond anvil cell: finite-element study. Appl Phys Lett, 91, 2007, 141919, 10.1063/1.2794431.
291. [291] Levitas, V.I., Zarechnyy, O.M., Modeling and simulation of mechanochemical processes in a rotational diamond anvil cell. EPL Europhys Lett, 88, 2009, 16004, 10.1209/0295-5075/88/16004.
292. [292] Levitas, V.I., Ma, Y., Selvi, E., Wu, J., Patten, J.A., High-density amorphous phase of silicon carbide obtained under large plastic shear and high pressure. Phys Rev B, 85, 2012, 54114, 10.1103/PhysRevB.85.054114.
293. [293] Delogu, F., Are processing conditions similar in ball milling and high-pressure torsion? The case of the tetragonal-to-monoclinic phase transition in ZrO2 powders. Scr Mater 67 (2012), 340–343, 10.1016/j.scriptamat.2012.05.031.
294. [294] Leroy, B., Collision between two balls accompanied by deformation: a qualitative approach to Hertz's theory. Am J Phys, 53, 1985, 346, 10.1119/1.14164.
295. [295] Bellon, P., Averback, R., Nonequilibrium roughening of interfaces in crystals under shear: application to ball milling. Phys Rev Lett 74 (1995), 1819–1822, 10.1103/PhysRevLett. 74.1819.
296. [296] Hammerberg, J.E., Holian, B.L., Röder, J., Bishop, A.R., Zhou, S.J., Nonlinear dynamics and the problem of slip at material interfaces. Phys D Nonlinear Phenom 123 (1998), 330–340, 10.1016/S0167-2789(98)00132-8.
297. [297] Fu, X.-Y., Falk, M.L., Rigney, D.A., Sliding behavior of metallic glass. Wear 250 (2001), 420–430, 10.1016/S0043-1648(01)00607-X.
298. [298] Lund, A.C., Schuh, C.A., Atomistic simulation of strain-induced amorphization. Appl Phys Lett, 82, 2003, 2017, 10.1063/1.1563831.
299. [299] Lund, A.C., Topological and chemical arrangement of binary alloys during severe deformation. J Appl Phys, 95, 2004, 4815, 10.1063/1.1691481.
300. [300] Delogu, F., Cocco, G., Molecular dynamics investigation on the role of sliding interfaces and friction in the formation of amorphous phases. Phys Rev B, 71, 2005, 144108, 10.1103/PhysRevB.71.144108.
301. [301] Odunuga, S., Li, Y., Krasnochtchekov, P., Bellon, P., Averback, R.S., Forced chemical mixing in alloys driven by plastic deformation. Phys Rev Lett, 95, 2005, 45901, 10.1103/PhysRevLett. 95.045901.
302. [302] Delogu, F., Forced chemical mixing in model immiscible systems under plastic deformation. J Appl Phys, 104, 2008, 73533, 10.1063/1.2987476.
303. [303] Vo, N.Q., Odunuga, S., Bellon, P., Averback, R.S., Forced chemical mixing in immiscible alloys during severe plastic deformation at elevated temperatures. Acta Mater 57 (2009), 3012–3019, 10.1016/j.actamat.2009.03.007.
304. [304] Ashkenazy, Y., Vo, N.Q., Schwen, D., Averback, R.S., Bellon, P., Shear induced chemical mixing in heterogeneous systems. Acta Mater 60 (2012), 984–993, 10.1016/j.actamat.2011.11.014.
305. [305] Delogu, F., Cocco, G., Numerical simulations of atomic-scale disordering processes at impact between two rough crystalline surfaces. Phys Rev B, 74, 2006, 35406, 10.1103/PhysRevB.74.035406.
306. [306] Delogu, F., Molecular dynamics of atomic rearrangements at perturbed surfaces. Phys Rev B, 80, 2009, 14115, 10.1103/PhysRevB.80.014115.
307. [307] Delogu, F., Molecular dynamics of collisions between rough surfaces. Phys Rev B, 82, 2010, 205415, 10.1103/PhysRevB.82.205415.
308. [308] Delogu, F., A possible alloying mechanism in idealized collisions between Cu and Sn crystals. Chem Phys Lett 521 (2012), 125–129, 10.1016/j.cplett.2011.11.071.
309. [309] Delogu, F., Cocco, G., Kinetics of amorphization processes by mechanical alloying: a modeling approach. J Alloys Compd 436 (2007), 233–240, 10.1016/j.jallcom.2006.07.029.
310. [310] Delogu, F., Kinetics of allotropic phase transformation in cobalt powders undergoing mechanical processing. Scr Mater 58 (2008), 126–129, 10.1016/j.scriptamat.2007.09.021.
311. [311] Delogu, F., A mechanistic study of Ag50Cu50 solid solution formation by mechanical alloying. Acta Mater 56 (2008), 2344–2352, 10.1016/j.actamat.2008.01.024.
312. [312] Delogu, F., A few details of the austenite to martensite phase transformation in 304 stainless steel powders under mechanical processing. Acta Mater 59 (2011), 2069–2074, 10.1016/j.actamat.2010.12.007.
313. [313] Szabò, Z.G., Kinetic characterization of complex reaction systems. Compton, R.G., Bamford, C.H., Tipper, C.F.H., (eds.) Theory Kinet, 2012, Elsevier Science.
314. [314] Delogu, F., Takacs, L., Mechanochemistry of Ti–C powder mixtures. Acta Mater 80 (2014), 435–444, 10.1016/j.actamat.2014.08.036.