Quantitative operando visualization of the energy band depth profile in solar cells

Nature Communications

Volumn 6, Issue , 2015, Pages

  Chen, Qi ^a,b   Mao, Lin ^a   Li, Yaowen ^a,c   Kong, Tao ^a   Wu, Na ^a   Ma, Changqi ^a   Bai, Sai ^d   Jin, Yizheng ^d   Wu, Dan ^a   Lu, Wei ^a   Wang, Bing ^b   Chen, Liwei ^a  

^a SUZHOU INSTITUTE OF NANO TECH AND NANO BIONICS   (China)

^b UNIVERSITY OF SCIENCE AND TECHNOLOGY OF CHINA   (China)

^c SOOCHOW UNIVERSITY   (China)

^d ZHEJIANG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

INDIUM TIN OXIDE;

ACCURACY ASSESSMENT; ELECTRODE; FUEL CELL; PHOTOVOLTAIC SYSTEM; POWER GENERATION; QUANTITATIVE ANALYSIS; SOLAR POWER; VISUALIZATION;

AMPLITUDE MODULATION; ARTICLE; ATOMIC FORCE MICROSCOPY; CELLS; CHEMICAL INTERACTION; CONTROLLED STUDY; DEVICES; DIPOLE; ELECTRIC FIELD; ELECTRODE; ELECTRON TRANSPORT; ENERGY; FREQUENCY MODULATION; ILLUMINATION; KELVIN PROBE MICROSCOPY; MICROSCOPY; OPERANDO ORGANIC PHOTOVOLTAIC DEVICE; POTENTIOMETRY; SCANNING ELECTRON MICROSCOPY; SEMICONDUCTOR; SHORT CIRCUIT CURRENT; SOLAR CELL; SURFACE PROPERTY;

EID: 84986596786     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms8745     Document Type: Article

References (52)

1. Green, M. A. Solar Cells: Operating Principles, Technology, and System Applications (Prentice-Hall, 1982).
2. Veldman, D. et al. Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends. J. Am. Chem. Soc. 130, 7721-7735 (2008).
3. Mozer, A. J. et al. Time-dependent mobility and recombination of the photoinduced charge carriers in conjugated polymer/fullerene bulk heterojunction solar cells. Phys. Rev. B 72, 035217 (2005).
4. Street, R. A., Cowan, S. & Heeger, A. J. Experimental test for geminate recombination applied to organic solar cells. Phys. Rev. B 82, 121301 (R) (2010).
5. Mihailetchi, V. D., Koster, L. J. A., Hummelen, J. C. & Blom, P. W. M. Photocurrent generation in polymer-fullerene bulk heterojunctions. Phys. Rev. Lett. 93, 216601 (2004).
6. Blom, P. W. M., Mihailetchi, V. D., Koster, L. J. A. & Markov, D. E. Device physics of polymer: fullerene bulk heterojunction solar cells. Adv. Mater. 19, 1551-1566 (2007).
7. Guerrero, A. et al. How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells. ACS Nano 6, 3453-3460 (2012).
8. Guerrero, A. et al. Interplay between fullerene surface coverage and contact selectivity of cathode interfaces in organic solar cells. ACS Nano 7, 4637-4646 (2013).
9. Zhou, H. Q. et al. High-efficiency polymer solar cells enhanced by solvent treatment. Adv. Mater. 25, 1646-1652 (2013).
10. Hegedus, S. S. & Shafarman, W. N. Thin-film solar cells: device measurements and analysis. Prog. Photovolt Res. Appl. 12, 155-176 (2004).
11. Wu, H., Huang, F., Peng, J. & Cao, Y. High-efficiency electron injection cathode of Au for polymer light-emitting devices. Org. Electron. 6, 118-128 (2005).
12. MacLeod, B. A. et al. Built-in potential in conjugated polymer diodes with changing anode work function: interfacial states and deviation from the Schottky-Mott limit. J. Phys. Chem. Lett. 3, 1202-1207 (2012).
13. Zimmermann, B., Glatthaar, M., Niggemann, M., Riede, M. & Hinsch, A. Electroabsorption studies of organic bulk-heterojunction solar cells. Thin Solid Films 493, 170-174 (2005).
14. Mihailetchi, V. D., Blom, P. W. M., Hummelen, J. C. & Rispens, M. T. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells. J. Appl. Phys. 94, 6849-6854 (2003).
15. Ishii, H. et al. Kelvin probe study of band bending at organic semiconductor/metal interfaces: examination of Fermi level alignment. Phys. Stat. Sol. A 201, 1075-1094 (2004).
16. Pingree, L. S. C., Reid, O. G. & Ginger, D. S. Electrical scanning probe microscopy on active organic electronic devices. Adv. Mater. 21, 19-28 (2009).
17. Hoppe, H. et al. Kelvin probe force microscopy study on conjugated polymer/fullerene bulk heterojunction organic solar cells. Nano Lett. 5, 269-274 (2005).
18. Chen, F. et al. Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells. Nanotechnology 24, 484011 (2013).
19. Yuan, Y. B. et al. Efficiency enhancement in organic solar cells with ferroelectric polymers. Nat. Mater. 10, 296-302 (2011).
20. He, Z. C. et al. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells. Adv. Mater. 23, 4636-4643 (2011).
21. Lee, J., Kong, J., Kim, H., Kang, S.-O. & Lee, K. Direct observation of internal potential distributions in a bulk heterojunction solar cell. Appl. Phys. Lett. 99, 243301 (2011).
22. Kong, J. et al. Biased internal potential distributions in a bulk-heterojunction organic solar cell incorporated with a TiOx interlayer. Appl. Phys. Lett. 100, 213305 (2012).
23. Saive, R. et al. Imaging the electric potential within organic solar cells. Adv. Funct. Mater. 23, 5854-5860 (2013).
24. Bergmann, V. W. et al. Real-space observation of unbalanced charge distribution inside a perovskite-sensitized solar cell. Nat. Commun. 5, 5001 (2014).
25. Glatzel, T., Marron, D. F., Schedel-Niedrig, T., Sadewasser, S. & Lux-Steiner, M. C. CuGaSe2 solar cell cross section studied by Kelvin probe force microscopy in ultrahigh vacuum. Appl. Phys. Lett. 81, 2017-2019 (2002).
26. Jiang, C.-S., Moutinho, H. R., Friedman, D. J., Geisz, J. F. & Al-Jassim, M. M. Measurement of built-in electrical potential in III-V solar cells by scanning Kelvin probe microscopy. J. Appl. Phys. 93, 10035-10040 (2003).
27. Ishii, H., Sugiyama, K., Ito, E. & Seki, K. Energy level alignment and interfacial electronic structures at organic metal and organic organic interfaces. Adv. Mater. 11, 605-625 (1999).
28. Cahen, D. & Kahn, A. Electron energetics at surfaces and interfaces: concepts and experiments. Adv. Mater. 15, 271-277 (2003).
29. He, Z. C. et al. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat. Photon 6, 591-595 (2012).
30. Mao, L. et al. Flexible silver grid/PEDOT:PSS hybrid electrodes for large area inverted polymer solar cells. Nano Energy 10, 259-267 (2014).
31. You, J. et al. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat. Commun. 4, 1446 (2013).
32. Cohen, G. et al. Reconstruction of surface potential from Kelvin probe force microscopy images. Nanotechnology 24, 295702 (2013).
33. Charrier, D. S. H., Kemerink, M., Smalbrugge, B. E., de Vries, T. & Janssen, R. A. J. Real versus measured surface potentials in scanning Kelvin probe microscopy. ACS Nano 2, 622-626 (2008).
34. Jacobs, H. O., Leuchtmann, P., Homan, O. J. & Stemmer, A. Resolution and contrast in Kelvin probe force microscopy. J. Appl. Phys. 84, 1168-1173 (1998).
35. Jorgensen, M., Norrman, K. & Krebs, F. C. Stability/degradation of polymer solar cells. Sol. Energy Mater. Sol. C 92, 686-714 (2008).
36. Vasilopoulou, M. et al. Large work function shift of organic semiconductors inducing enhanced interfacial electron transfer in organic optoelectronics enabled by porphyrin aggregated nanostructures. Nano Res. 7, 679-693 (2014).
37. Campoy-Quiles, M. et al. Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends. Nat. Mater. 7, 158-164 (2008).
38. Chen, D. A., Nakahara, A., Wei, D. G., Nordlund, D. & Russell, T. P. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology. Nano Lett. 11, 561-567 (2011).
39. Shrotriya, V., Li, G., Yao, Y., Chu, C. W. & Yang, Y. Transition metal oxides as the buffer layer for polymer photovoltaic cells. Appl. Phys. Lett. 88, 073508 (2006).
40. Glatzel, T., Sadewasser, S. & Lux-Steiner, M. C. Amplitude or frequency modulation-detection in Kelvin probe force microscopy. Appl. Surf. Sci. 210, 84-89 (2003).
41. Strassburg, E., Boag, A. & Rosenwaks, Y. Reconstruction of electrostatic force microscopy images. Rev. Sci. Instrum. 76, 083705 (2005).
42. Liscio, A., Palermo, V. & Samorì, P. Nanoscale quantitative measurement of the potential of charged nanostructures by electrostatic and kelvin probe force microscopy: unraveling electronic processes in complex materials. Accounts Chem. Res. 43, 541-550 (2010).
43. He, Y., Chen, H.-Y., Hou, J. & Li, Y. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells. J. Am. Chem. Soc. 132, 1377-1382 (2010).
44. Yip, H. L. & Jen, A. K. Y. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells. Energy Environ. Sci. 5, 5994-6011 (2012).
45. Malliaras, G. G., Salem, J. R., Brock, P. J. & Scott, J. C. Photovoltaic measurement of the built-in potential in organic light emitting diodes and photodiodes. J. Appl. Phys. 84, 1583-1587 (1998).
46. Koster, L. J. A., Smits, E. C. P., Mihailetchi, V. D. & Blom, P. W. M. Device model for the operation of polymer/fullerene bulk heterojunction solar cells. Phys. Rev. B 72, 085205 (2005).
47. Shuttle, C. G., Hamilton, R., O'Regan, B. C., Nelson, J. & Durrant, J. R. Chargedensitybased analysis of the current-voltage response of polythiophene/fullerene photovoltaic devices. Proc. Natl Acad. Sci. USA 107, 16448-16452 (2010).
48. Treat, N. D. et al. Interdiffusion of PCBM and P3HT reveals miscibility in a photovoltaically active blend. Adv. Energy Mater. 1, 82-89 (2011).
49. Guan, Z. L. et al. Direct determination of the electronic structure of the poly (3-hexylthiophene): phenyl-6, 6-C61 butyric acid methyl ester blend. Org. Electron. 11, 1779-1785 (2010).
50. Aarnio, H. et al. Spontaneous charge transfer and dipole formation at the interface between P3HT and PCBM. Adv. Energy Mater. 1, 792-797 (2011).
51. Liang, X. et al. Colloidal indium-doped zinc oxide nanocrystals with tunable work function: rational synthesis and optoelectronic applications. Chem. Mater. 26, 5169-5178 (2014).
52. Bai, S. et al. High-performance planar heterojunction perovskite solar cells: preserving long charge carrier diffusion lengths and interfacial engineering. Nano Res. 7, 1749-1758 (2014).